-/***************************************************************************\r
- * Copyright (C) 2008 by John McCarthy *\r
- * jgmcc@magma.ca *\r
- * *\r
- * Copyright (C) 2008 by Spencer Oliver *\r
- * spen@spen-soft.co.uk *\r
- * *\r
- * Copyright (C) 2008 by David T.L. Wong *\r
- * *\r
- * This program is free software; you can redistribute it and/or modify *\r
- * it under the terms of the GNU General Public License as published by *\r
- * the Free Software Foundation; either version 2 of the License, or *\r
- * (at your option) any later version. *\r
- * *\r
- * This program is distributed in the hope that it will be useful, *\r
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *\r
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *\r
- * GNU General Public License for more details. *\r
- * *\r
- * You should have received a copy of the GNU General Public License *\r
- * along with this program; if not, write to the *\r
- * Free Software Foundation, Inc., *\r
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *\r
- ***************************************************************************/\r
-#ifdef HAVE_CONFIG_H\r
-#include "config.h"\r
-#endif\r
-\r
-#include <string.h>\r
-#include "log.h"\r
-#include "mips32.h"\r
-#include "mips32_dmaacc.h"\r
-\r
-/*\r
- * The following logic shamelessly cloned from HairyDairyMaid's wrt54g_debrick\r
- * to support the Broadcom BCM5352 SoC in the Linksys WRT54GL wireless router\r
- * (and any others that support EJTAG DMA transfers).\r
- * Note: This only supports memory read/write. Since the BCM5352 doesn't\r
- * appear to support PRACC accesses, all debug functions except halt\r
- * do not work. Still, this does allow erasing/writing flash as well as\r
- * displaying/modifying memory and memory mapped registers.\r
- */\r
-\r
-static int ejtag_dma_read(mips_ejtag_t *ejtag_info, u32 addr, u32 *data)\r
-{\r
- u32 v;\r
- u32 ctrl_reg;\r
- int retries = RETRY_ATTEMPTS;\r
-\r
-begin_ejtag_dma_read:\r
-\r
- // Setup Address\r
- v = addr;\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Initiate DMA Read & set DSTRT\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DRWN | EJTAG_CTRL_DMA_WORD | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
-\r
- // Wait for DSTRT to Clear\r
- do {\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- } while(ctrl_reg & EJTAG_CTRL_DSTRT);\r
-\r
- // Read Data\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, data);\r
-\r
- // Clear DMA & Check DERR\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- if (ctrl_reg & EJTAG_CTRL_DERR)\r
- {\r
- if (retries--) {\r
- printf("DMA Read Addr = %08x Data = ERROR ON READ (retrying)\n", addr);\r
- goto begin_ejtag_dma_read;\r
- } else printf("DMA Read Addr = %08x Data = ERROR ON READ\n", addr);\r
- return ERROR_JTAG_DEVICE_ERROR;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-static int ejtag_dma_read_h(mips_ejtag_t *ejtag_info, u32 addr, u16 *data)\r
-{\r
- u32 v;\r
- u32 ctrl_reg;\r
- int retries = RETRY_ATTEMPTS;\r
-\r
-begin_ejtag_dma_read_h:\r
-\r
- // Setup Address\r
- v = addr;\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Initiate DMA Read & set DSTRT\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DRWN | EJTAG_CTRL_DMA_HALFWORD | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
-\r
- // Wait for DSTRT to Clear\r
- do {\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- } while(ctrl_reg & EJTAG_CTRL_DSTRT);\r
-\r
- // Read Data\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Clear DMA & Check DERR\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- if (ctrl_reg & EJTAG_CTRL_DERR)\r
- {\r
- if (retries--) {\r
- printf("DMA Read Addr = %08x Data = ERROR ON READ (retrying)\n", addr);\r
- goto begin_ejtag_dma_read_h;\r
- } else printf("DMA Read Addr = %08x Data = ERROR ON READ\n", addr);\r
- return ERROR_JTAG_DEVICE_ERROR;\r
- }\r
-\r
- // Handle the bigendian/littleendian\r
- if ( addr & 0x2 ) *data = (v>>16)&0xffff ;\r
- else *data = (v&0x0000ffff) ;\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-static int ejtag_dma_read_b(mips_ejtag_t *ejtag_info, u32 addr, u8 *data)\r
-{\r
- u32 v;\r
- u32 ctrl_reg;\r
- int retries = RETRY_ATTEMPTS;\r
-\r
-begin_ejtag_dma_read_b:\r
-\r
- // Setup Address\r
- v = addr;\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Initiate DMA Read & set DSTRT\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DRWN | EJTAG_CTRL_DMA_BYTE | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
-\r
- // Wait for DSTRT to Clear\r
- do {\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- } while(ctrl_reg & EJTAG_CTRL_DSTRT);\r
-\r
- // Read Data\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Clear DMA & Check DERR\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- if (ctrl_reg & EJTAG_CTRL_DERR)\r
- {\r
- if (retries--) {\r
- printf("DMA Read Addr = %08x Data = ERROR ON READ (retrying)\n", addr);\r
- goto begin_ejtag_dma_read_b;\r
- } else printf("DMA Read Addr = %08x Data = ERROR ON READ\n", addr);\r
- return ERROR_JTAG_DEVICE_ERROR;\r
- }\r
-\r
- // Handle the bigendian/littleendian\r
- switch(addr & 0x3) {\r
- case 0: *data = v & 0xff; break;\r
- case 1: *data = (v>>8) & 0xff; break;\r
- case 2: *data = (v>>16) & 0xff; break;\r
- case 3: *data = (v>>24) & 0xff; break;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-static int ejtag_dma_write(mips_ejtag_t *ejtag_info, u32 addr, u32 data)\r
-{\r
- u32 v;\r
- u32 ctrl_reg;\r
- int retries = RETRY_ATTEMPTS;\r
-\r
-begin_ejtag_dma_write:\r
-\r
- // Setup Address\r
- v = addr;\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Setup Data\r
- v = data;\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Initiate DMA Write & set DSTRT\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DMA_WORD | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
-\r
- // Wait for DSTRT to Clear\r
- do {\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- } while(ctrl_reg & EJTAG_CTRL_DSTRT);\r
-\r
- // Clear DMA & Check DERR\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- if (ctrl_reg & EJTAG_CTRL_DERR)\r
- {\r
- if (retries--) {\r
- printf("DMA Write Addr = %08x Data = ERROR ON WRITE (retrying)\n", addr);\r
- goto begin_ejtag_dma_write;\r
- } else printf("DMA Write Addr = %08x Data = ERROR ON WRITE\n", addr);\r
- return ERROR_JTAG_DEVICE_ERROR;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-static int ejtag_dma_write_h(mips_ejtag_t *ejtag_info, u32 addr, u32 data)\r
-{\r
- u32 v;\r
- u32 ctrl_reg;\r
- int retries = RETRY_ATTEMPTS;\r
-\r
-\r
- // Handle the bigendian/littleendian\r
- data &= 0xffff;\r
- data |= data<<16;\r
-\r
-begin_ejtag_dma_write_h:\r
-\r
- // Setup Address\r
- v = addr;\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Setup Data\r
- v = data;\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Initiate DMA Write & set DSTRT\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DMA_HALFWORD | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
-\r
- // Wait for DSTRT to Clear\r
- do {\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- } while(ctrl_reg & EJTAG_CTRL_DSTRT);\r
-\r
- // Clear DMA & Check DERR\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- if (ctrl_reg & EJTAG_CTRL_DERR)\r
- {\r
- if (retries--) {\r
- printf("DMA Write Addr = %08x Data = ERROR ON WRITE (retrying)\n", addr);\r
- goto begin_ejtag_dma_write_h;\r
- } else printf("DMA Write Addr = %08x Data = ERROR ON WRITE\n", addr);\r
- return ERROR_JTAG_DEVICE_ERROR;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-static int ejtag_dma_write_b(mips_ejtag_t *ejtag_info, u32 addr, u32 data)\r
-{\r
- u32 v;\r
- u32 ctrl_reg;\r
- int retries = RETRY_ATTEMPTS;\r
-\r
-\r
- // Handle the bigendian/littleendian\r
- data &= 0xff;\r
- data |= data<<8;\r
- data |= data<<16;\r
-\r
-begin_ejtag_dma_write_b:\r
-\r
- // Setup Address\r
- v = addr;\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Setup Data\r
- v = data;\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);\r
- mips_ejtag_drscan_32(ejtag_info, &v);\r
-\r
- // Initiate DMA Write & set DSTRT\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DMA_BYTE | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
-\r
- // Wait for DSTRT to Clear\r
- do {\r
- ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- } while(ctrl_reg & EJTAG_CTRL_DSTRT);\r
-\r
- // Clear DMA & Check DERR\r
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);\r
- ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;\r
- mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);\r
- if (ctrl_reg & EJTAG_CTRL_DERR)\r
- {\r
- if (retries--) {\r
- printf("DMA Write Addr = %08x Data = ERROR ON WRITE (retrying)\n", addr);\r
- goto begin_ejtag_dma_write_b;\r
- } else printf("DMA Write Addr = %08x Data = ERROR ON WRITE\n", addr);\r
- return ERROR_JTAG_DEVICE_ERROR;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-\r
-int mips32_dmaacc_read_mem(mips_ejtag_t *ejtag_info, u32 addr, int size, int count, void *buf)\r
-{\r
- switch (size)\r
- {\r
- case 1:\r
- return mips32_dmaacc_read_mem8(ejtag_info, addr, count, (u8*)buf);\r
- case 2:\r
- return mips32_dmaacc_read_mem16(ejtag_info, addr, count, (u16*)buf);\r
- case 4:\r
- return mips32_dmaacc_read_mem32(ejtag_info, addr, count, (u32*)buf);\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int mips32_dmaacc_read_mem32(mips_ejtag_t *ejtag_info, u32 addr, int count, u32 *buf)\r
-{\r
- int i;\r
- int retval;\r
-\r
- for(i=0; i<count; i++) {\r
- if((retval=ejtag_dma_read(ejtag_info, addr+i*sizeof(*buf), &buf[i])) != ERROR_OK)\r
- return retval;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int mips32_dmaacc_read_mem16(mips_ejtag_t *ejtag_info, u32 addr, int count, u16 *buf)\r
-{\r
- int i;\r
- int retval;\r
-\r
- for(i=0; i<count; i++) {\r
- if((retval=ejtag_dma_read_h(ejtag_info, addr+i*sizeof(*buf), &buf[i])) != ERROR_OK)\r
- return retval;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int mips32_dmaacc_read_mem8(mips_ejtag_t *ejtag_info, u32 addr, int count, u8 *buf)\r
-{\r
- int i;\r
- int retval;\r
-\r
- for(i=0; i<count; i++) {\r
- if((retval=ejtag_dma_read_b(ejtag_info, addr+i*sizeof(*buf), &buf[i])) != ERROR_OK)\r
- return retval;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int mips32_dmaacc_write_mem(mips_ejtag_t *ejtag_info, u32 addr, int size, int count, void *buf)\r
-{\r
- switch (size)\r
- {\r
- case 1:\r
- return mips32_dmaacc_write_mem8(ejtag_info, addr, count, (u8*)buf);\r
- case 2:\r
- return mips32_dmaacc_write_mem16(ejtag_info, addr, count,(u16*)buf);\r
- case 4:\r
- return mips32_dmaacc_write_mem32(ejtag_info, addr, count, (u32*)buf);\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int mips32_dmaacc_write_mem32(mips_ejtag_t *ejtag_info, u32 addr, int count, u32 *buf)\r
-{\r
- int i;\r
- int retval;\r
-\r
- for(i=0; i<count; i++) {\r
- if((retval=ejtag_dma_write(ejtag_info, addr+i*sizeof(*buf), buf[i])) != ERROR_OK)\r
- return retval;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int mips32_dmaacc_write_mem16(mips_ejtag_t *ejtag_info, u32 addr, int count, u16 *buf)\r
-{\r
- int i;\r
- int retval;\r
-\r
- for(i=0; i<count; i++) {\r
- if((retval=ejtag_dma_write_h(ejtag_info, addr+i*sizeof(*buf), buf[i])) != ERROR_OK)\r
- return retval;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int mips32_dmaacc_write_mem8(mips_ejtag_t *ejtag_info, u32 addr, int count, u8 *buf)\r
-{\r
- int i;\r
- int retval;\r
-\r
- for(i=0; i<count; i++) {\r
- if((retval=ejtag_dma_write_b(ejtag_info, addr+i*sizeof(*buf), buf[i])) != ERROR_OK)\r
- return retval;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
+/***************************************************************************
+ * Copyright (C) 2008 by John McCarthy *
+ * jgmcc@magma.ca *
+ * *
+ * Copyright (C) 2008 by Spencer Oliver *
+ * spen@spen-soft.co.uk *
+ * *
+ * Copyright (C) 2008 by David T.L. Wong *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <string.h>
+#include "log.h"
+#include "mips32.h"
+#include "mips32_dmaacc.h"
+
+/*
+ * The following logic shamelessly cloned from HairyDairyMaid's wrt54g_debrick
+ * to support the Broadcom BCM5352 SoC in the Linksys WRT54GL wireless router
+ * (and any others that support EJTAG DMA transfers).
+ * Note: This only supports memory read/write. Since the BCM5352 doesn't
+ * appear to support PRACC accesses, all debug functions except halt
+ * do not work. Still, this does allow erasing/writing flash as well as
+ * displaying/modifying memory and memory mapped registers.
+ */
+
+static int ejtag_dma_read(mips_ejtag_t *ejtag_info, u32 addr, u32 *data)
+{
+ u32 v;
+ u32 ctrl_reg;
+ int retries = RETRY_ATTEMPTS;
+
+begin_ejtag_dma_read:
+
+ // Setup Address
+ v = addr;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Initiate DMA Read & set DSTRT
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DRWN | EJTAG_CTRL_DMA_WORD | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+
+ // Wait for DSTRT to Clear
+ do {
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ } while(ctrl_reg & EJTAG_CTRL_DSTRT);
+
+ // Read Data
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);
+ mips_ejtag_drscan_32(ejtag_info, data);
+
+ // Clear DMA & Check DERR
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ if (ctrl_reg & EJTAG_CTRL_DERR)
+ {
+ if (retries--) {
+ printf("DMA Read Addr = %08x Data = ERROR ON READ (retrying)\n", addr);
+ goto begin_ejtag_dma_read;
+ } else printf("DMA Read Addr = %08x Data = ERROR ON READ\n", addr);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+
+ return ERROR_OK;
+}
+
+static int ejtag_dma_read_h(mips_ejtag_t *ejtag_info, u32 addr, u16 *data)
+{
+ u32 v;
+ u32 ctrl_reg;
+ int retries = RETRY_ATTEMPTS;
+
+begin_ejtag_dma_read_h:
+
+ // Setup Address
+ v = addr;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Initiate DMA Read & set DSTRT
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DRWN | EJTAG_CTRL_DMA_HALFWORD | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+
+ // Wait for DSTRT to Clear
+ do {
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ } while(ctrl_reg & EJTAG_CTRL_DSTRT);
+
+ // Read Data
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Clear DMA & Check DERR
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ if (ctrl_reg & EJTAG_CTRL_DERR)
+ {
+ if (retries--) {
+ printf("DMA Read Addr = %08x Data = ERROR ON READ (retrying)\n", addr);
+ goto begin_ejtag_dma_read_h;
+ } else printf("DMA Read Addr = %08x Data = ERROR ON READ\n", addr);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+
+ // Handle the bigendian/littleendian
+ if ( addr & 0x2 ) *data = (v>>16)&0xffff ;
+ else *data = (v&0x0000ffff) ;
+
+ return ERROR_OK;
+}
+
+static int ejtag_dma_read_b(mips_ejtag_t *ejtag_info, u32 addr, u8 *data)
+{
+ u32 v;
+ u32 ctrl_reg;
+ int retries = RETRY_ATTEMPTS;
+
+begin_ejtag_dma_read_b:
+
+ // Setup Address
+ v = addr;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Initiate DMA Read & set DSTRT
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DRWN | EJTAG_CTRL_DMA_BYTE | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+
+ // Wait for DSTRT to Clear
+ do {
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ } while(ctrl_reg & EJTAG_CTRL_DSTRT);
+
+ // Read Data
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Clear DMA & Check DERR
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ if (ctrl_reg & EJTAG_CTRL_DERR)
+ {
+ if (retries--) {
+ printf("DMA Read Addr = %08x Data = ERROR ON READ (retrying)\n", addr);
+ goto begin_ejtag_dma_read_b;
+ } else printf("DMA Read Addr = %08x Data = ERROR ON READ\n", addr);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+
+ // Handle the bigendian/littleendian
+ switch(addr & 0x3) {
+ case 0: *data = v & 0xff; break;
+ case 1: *data = (v>>8) & 0xff; break;
+ case 2: *data = (v>>16) & 0xff; break;
+ case 3: *data = (v>>24) & 0xff; break;
+ }
+
+ return ERROR_OK;
+}
+
+static int ejtag_dma_write(mips_ejtag_t *ejtag_info, u32 addr, u32 data)
+{
+ u32 v;
+ u32 ctrl_reg;
+ int retries = RETRY_ATTEMPTS;
+
+begin_ejtag_dma_write:
+
+ // Setup Address
+ v = addr;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Setup Data
+ v = data;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Initiate DMA Write & set DSTRT
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DMA_WORD | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+
+ // Wait for DSTRT to Clear
+ do {
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ } while(ctrl_reg & EJTAG_CTRL_DSTRT);
+
+ // Clear DMA & Check DERR
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ if (ctrl_reg & EJTAG_CTRL_DERR)
+ {
+ if (retries--) {
+ printf("DMA Write Addr = %08x Data = ERROR ON WRITE (retrying)\n", addr);
+ goto begin_ejtag_dma_write;
+ } else printf("DMA Write Addr = %08x Data = ERROR ON WRITE\n", addr);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+
+ return ERROR_OK;
+}
+
+static int ejtag_dma_write_h(mips_ejtag_t *ejtag_info, u32 addr, u32 data)
+{
+ u32 v;
+ u32 ctrl_reg;
+ int retries = RETRY_ATTEMPTS;
+
+
+ // Handle the bigendian/littleendian
+ data &= 0xffff;
+ data |= data<<16;
+
+begin_ejtag_dma_write_h:
+
+ // Setup Address
+ v = addr;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Setup Data
+ v = data;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Initiate DMA Write & set DSTRT
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DMA_HALFWORD | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+
+ // Wait for DSTRT to Clear
+ do {
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ } while(ctrl_reg & EJTAG_CTRL_DSTRT);
+
+ // Clear DMA & Check DERR
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ if (ctrl_reg & EJTAG_CTRL_DERR)
+ {
+ if (retries--) {
+ printf("DMA Write Addr = %08x Data = ERROR ON WRITE (retrying)\n", addr);
+ goto begin_ejtag_dma_write_h;
+ } else printf("DMA Write Addr = %08x Data = ERROR ON WRITE\n", addr);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+
+ return ERROR_OK;
+}
+
+static int ejtag_dma_write_b(mips_ejtag_t *ejtag_info, u32 addr, u32 data)
+{
+ u32 v;
+ u32 ctrl_reg;
+ int retries = RETRY_ATTEMPTS;
+
+
+ // Handle the bigendian/littleendian
+ data &= 0xff;
+ data |= data<<8;
+ data |= data<<16;
+
+begin_ejtag_dma_write_b:
+
+ // Setup Address
+ v = addr;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Setup Data
+ v = data;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);
+ mips_ejtag_drscan_32(ejtag_info, &v);
+
+ // Initiate DMA Write & set DSTRT
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_DMA_BYTE | EJTAG_CTRL_DSTRT | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+
+ // Wait for DSTRT to Clear
+ do {
+ ctrl_reg = EJTAG_CTRL_DMAACC | EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ } while(ctrl_reg & EJTAG_CTRL_DSTRT);
+
+ // Clear DMA & Check DERR
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
+ ctrl_reg = EJTAG_CTRL_PROBEN | EJTAG_CTRL_PRACC;
+ mips_ejtag_drscan_32(ejtag_info, &ctrl_reg);
+ if (ctrl_reg & EJTAG_CTRL_DERR)
+ {
+ if (retries--) {
+ printf("DMA Write Addr = %08x Data = ERROR ON WRITE (retrying)\n", addr);
+ goto begin_ejtag_dma_write_b;
+ } else printf("DMA Write Addr = %08x Data = ERROR ON WRITE\n", addr);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+
+ return ERROR_OK;
+}
+
+int mips32_dmaacc_read_mem(mips_ejtag_t *ejtag_info, u32 addr, int size, int count, void *buf)
+{
+ switch (size)
+ {
+ case 1:
+ return mips32_dmaacc_read_mem8(ejtag_info, addr, count, (u8*)buf);
+ case 2:
+ return mips32_dmaacc_read_mem16(ejtag_info, addr, count, (u16*)buf);
+ case 4:
+ return mips32_dmaacc_read_mem32(ejtag_info, addr, count, (u32*)buf);
+ }
+
+ return ERROR_OK;
+}
+
+int mips32_dmaacc_read_mem32(mips_ejtag_t *ejtag_info, u32 addr, int count, u32 *buf)
+{
+ int i;
+ int retval;
+
+ for(i=0; i<count; i++) {
+ if((retval=ejtag_dma_read(ejtag_info, addr+i*sizeof(*buf), &buf[i])) != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
+int mips32_dmaacc_read_mem16(mips_ejtag_t *ejtag_info, u32 addr, int count, u16 *buf)
+{
+ int i;
+ int retval;
+
+ for(i=0; i<count; i++) {
+ if((retval=ejtag_dma_read_h(ejtag_info, addr+i*sizeof(*buf), &buf[i])) != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
+int mips32_dmaacc_read_mem8(mips_ejtag_t *ejtag_info, u32 addr, int count, u8 *buf)
+{
+ int i;
+ int retval;
+
+ for(i=0; i<count; i++) {
+ if((retval=ejtag_dma_read_b(ejtag_info, addr+i*sizeof(*buf), &buf[i])) != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
+int mips32_dmaacc_write_mem(mips_ejtag_t *ejtag_info, u32 addr, int size, int count, void *buf)
+{
+ switch (size)
+ {
+ case 1:
+ return mips32_dmaacc_write_mem8(ejtag_info, addr, count, (u8*)buf);
+ case 2:
+ return mips32_dmaacc_write_mem16(ejtag_info, addr, count,(u16*)buf);
+ case 4:
+ return mips32_dmaacc_write_mem32(ejtag_info, addr, count, (u32*)buf);
+ }
+
+ return ERROR_OK;
+}
+
+int mips32_dmaacc_write_mem32(mips_ejtag_t *ejtag_info, u32 addr, int count, u32 *buf)
+{
+ int i;
+ int retval;
+
+ for(i=0; i<count; i++) {
+ if((retval=ejtag_dma_write(ejtag_info, addr+i*sizeof(*buf), buf[i])) != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
+int mips32_dmaacc_write_mem16(mips_ejtag_t *ejtag_info, u32 addr, int count, u16 *buf)
+{
+ int i;
+ int retval;
+
+ for(i=0; i<count; i++) {
+ if((retval=ejtag_dma_write_h(ejtag_info, addr+i*sizeof(*buf), buf[i])) != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
+int mips32_dmaacc_write_mem8(mips_ejtag_t *ejtag_info, u32 addr, int count, u8 *buf)
+{
+ int i;
+ int retval;
+
+ for(i=0; i<count; i++) {
+ if((retval=ejtag_dma_write_b(ejtag_info, addr+i*sizeof(*buf), buf[i])) != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
Code Review / openocd.git / blobdiff