* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
-#ifndef DSP5680XX_H
-#define DSP5680XX_H
+
+#ifndef OPENOCD_TARGET_DSP5680XX_H
+#define OPENOCD_TARGET_DSP5680XX_H
#include <jtag/jtag.h>
* @file dsp5680xx.h
* @author Rodrigo Rosa <rodrigorosa.LG@gmail.com>
* @date Thu Jun 9 18:54:38 2011
- *
+ *
* @brief Basic support for the 5680xx DSP from Freescale.
* The chip has two taps in the JTAG chain, the Master tap and the Core tap.
* In this code the Master tap is only used to unlock the flash memory by executing a JTAG instruction.
- *
- *
+ *
*/
-
#define S_FILE_DATA_OFFSET 0x200000
+#define TIME_DIV_FREESCALE 0.3
-//----------------------------------------------------------------
-// JTAG
-//----------------------------------------------------------------
+/** ----------------------------------------------------------------
+ * JTAG
+ *----------------------------------------------------------------
+ */
#define DSP5680XX_JTAG_CORE_TAP_IRLEN 4
#define DSP5680XX_JTAG_MASTER_TAP_IRLEN 8
-#define JTAG_STATUS_MASK 0x03
+#define JTAG_STATUS_MASK 0x0F
#define JTAG_STATUS_NORMAL 0x01
#define JTAG_STATUS_STOPWAIT 0x05
#define JTAG_STATUS_BUSY 0x09
#define JTAG_STATUS_DEBUG 0x0D
-#define JTAG_STATUS_DEAD 0x0f
+#define JTAG_STATUS_DEAD 0x0f
#define JTAG_INSTR_EXTEST 0x0
#define JTAG_INSTR_SAMPLE_PRELOAD 0x1
#define JTAG_INSTR_IDCODE 0x2
-#define JTAG_INSTR_EXTEST_PULLUP 0x3
-#define JTAG_INSTR_HIGHZ 0x4
+#define JTAG_INSTR_EXTEST_PULLUP 0x3
+#define JTAG_INSTR_HIGHZ 0x4
#define JTAG_INSTR_CLAMP 0x5
#define JTAG_INSTR_ENABLE_ONCE 0x6
#define JTAG_INSTR_DEBUG_REQUEST 0x7
#define JTAG_INSTR_BYPASS 0xF
-//----------------------------------------------------------------
-
+ /**
+ * ----------------------------------------------------------------
+ */
-//----------------------------------------------------------------
-// Master TAP instructions from MC56F8000RM.pdf
-//----------------------------------------------------------------
+/** ----------------------------------------------------------------
+ * Master TAP instructions from MC56F8000RM.pdf
+ * ----------------------------------------------------------------
+ */
#define MASTER_TAP_CMD_BYPASS 0xF
#define MASTER_TAP_CMD_IDCODE 0x2
#define MASTER_TAP_CMD_TLM_SEL 0x5
#define MASTER_TAP_CMD_FLASH_ERASE 0x8
-//----------------------------------------------------------------
+ /**
+ * ----------------------------------------------------------------
+ */
-//----------------------------------------------------------------
-// EOnCE control register info
-//----------------------------------------------------------------
+ /** ----------------------------------------------------------------
+ * EOnCE control register info
+ * ----------------------------------------------------------------
+ */
#define DSP5680XX_ONCE_OCR_EX (1<<5)
/* EX Bit Definition
- 0 Remain in the Debug Processing State
- 1 Leave the Debug Processing State */
+ 0 Remain in the Debug Processing State
+ 1 Leave the Debug Processing State */
#define DSP5680XX_ONCE_OCR_GO (1<<6)
/* GO Bit Definition
- 0 Inactive—No Action Taken
- 1 Execute Controller Instruction */
+ 0 Inactive—No Action Taken
+ 1 Execute Controller Instruction */
#define DSP5680XX_ONCE_OCR_RW (1<<7)
-/* RW Bit Definition
- 0 Write To the Register Specified by the RS[4:0] Bits
- 1 ReadFrom the Register Specified by the RS[4:0] Bits */
-//----------------------------------------------------------------
-
-//----------------------------------------------------------------
-// EOnCE Status Register
-//----------------------------------------------------------------
-#define DSP5680XX_ONCE_OSCR_OS1 (1<<5)
-#define DSP5680XX_ONCE_OSCR_OS0 (1<<4)
-//----------------------------------------------------------------
-
-//----------------------------------------------------------------
-// EOnCE Core Status - Describes the operating status of the core controller
-//----------------------------------------------------------------
+/** RW Bit Definition
+ * 0 Write To the Register Specified by the RS[4:0] Bits
+ * 1 ReadFrom the Register Specified by the RS[4:0] Bits
+ * ----------------------------------------------------------------
+ */
+
+ /** ----------------------------------------------------------------
+ * EOnCE Status Register
+ * ----------------------------------------------------------------
+ */
+#define DSP5680XX_ONCE_OSCR_OS1 (1<<5)
+#define DSP5680XX_ONCE_OSCR_OS0 (1<<4)
+ /**
+ * ----------------------------------------------------------------
+ */
+
+ /** ----------------------------------------------------------------
+ * EOnCE Core Status - Describes the operating status of the core controller
+ * ----------------------------------------------------------------
+ */
#define DSP5680XX_ONCE_OSCR_NORMAL_M (0)
-//00 - Normal - Controller Core Executing Instructions or in Reset
+/* 00 - Normal - Controller Core Executing Instructions or in Reset */
#define DSP5680XX_ONCE_OSCR_STOPWAIT_M (DSP5680XX_ONCE_OSCR_OS0)
-//01 - Stop/Wait - Controller Core in Stop or Wait Mode
+/* 01 - Stop/Wait - Controller Core in Stop or Wait Mode */
#define DSP5680XX_ONCE_OSCR_BUSY_M (DSP5680XX_ONCE_OSCR_OS1)
-//10 - Busy - Controller is Performing External or Peripheral Access (Wait States)
+/* 10 - Busy - Controller is Performing External or Peripheral Access (Wait States) */
#define DSP5680XX_ONCE_OSCR_DEBUG_M (DSP5680XX_ONCE_OSCR_OS0|DSP5680XX_ONCE_OSCR_OS1)
-//11 - Debug - Controller Core Halted and in Debug Mode
+/* 11 - Debug - Controller Core Halted and in Debug Mode */
#define EONCE_STAT_MASK 0x30
-//----------------------------------------------------------------
-
-//----------------------------------------------------------------
-// Register Select Encoding (eonce_rev.1.0_0208081.pdf@14)
-//----------------------------------------------------------------
-#define DSP5680XX_ONCE_NOREG 0x00 /* No register selected */
-#define DSP5680XX_ONCE_OCR 0x01 /* OnCE Debug Control Register */
-#define DSP5680XX_ONCE_OCNTR 0x02 /* OnCE Breakpoint and Trace Counter */
-#define DSP5680XX_ONCE_OSR 0x03 /* EOnCE status register */
-#define DSP5680XX_ONCE_OBAR 0x04 /* OnCE Breakpoint Address Register */
-#define DSP5680XX_ONCE_OBASE 0x05 /* EOnCE Peripheral Base Address register */
-#define DSP5680XX_ONCE_OTXRXSR 0x06 /* EOnCE TXRX Status and Control Register (OTXRXSR) */
-#define DSP5680XX_ONCE_OTX 0x07 /* EOnCE Transmit register (OTX) */
-#define DSP5680XX_ONCE_OPDBR 0x08 /* EOnCE Program Data Bus Register (OPDBR) */
-#define DSP5680XX_ONCE_OTX1 0x09 /* EOnCE Upper Transmit register (OTX1) */
-#define DSP5680XX_ONCE_OPABFR 0x0A /* OnCE Program Address Register—Fetch cycle */
-#define DSP5680XX_ONCE_ORX 0x0B /* EOnCE Receive register (ORX) */
-#define DSP5680XX_ONCE_OCNTR_C 0x0C /* Clear OCNTR */
-#define DSP5680XX_ONCE_ORX1 0x0D /* EOnCE Upper Receive register (ORX1) */
-#define DSP5680XX_ONCE_OTBCR 0x0E /* EOnCE Trace Buffer Control Reg (OTBCR) */
-#define DSP5680XX_ONCE_OPABER 0x10 /* OnCE Program Address Register—Execute cycle */
-#define DSP5680XX_ONCE_OPFIFO 0x11 /* OnCE Program address FIFO */
-#define DSP5680XX_ONCE_OBAR1 0x12 /* EOnCE Breakpoint 1 Unit 0 Address Reg.(OBAR1) */
-#define DSP5680XX_ONCE_OPABDR 0x13 /* OnCE Program Address Register—Decode cycle (OPABDR) */
-//----------------------------------------------------------------
-
-#define FLUSH_COUNT_READ_WRITE 8192 // This value works, higher values (and lower...) may work as well.
+ /**
+ * ----------------------------------------------------------------
+ */
+
+ /** ----------------------------------------------------------------
+ * Register Select Encoding (eonce_rev.1.0_0208081.pdf:14)
+ * ----------------------------------------------------------------
+ */
+#define DSP5680XX_ONCE_NOREG 0x00 /* No register selected */
+#define DSP5680XX_ONCE_OCR 0x01 /* OnCE Debug Control Register */
+#define DSP5680XX_ONCE_OCNTR 0x02 /* OnCE Breakpoint and Trace Counter */
+#define DSP5680XX_ONCE_OSR 0x03 /* EOnCE status register */
+#define DSP5680XX_ONCE_OBAR 0x04 /* OnCE Breakpoint Address Register */
+#define DSP5680XX_ONCE_OBASE 0x05 /* EOnCE Peripheral Base Address register */
+#define DSP5680XX_ONCE_OTXRXSR 0x06 /* EOnCE TXRX Status and Control Register (OTXRXSR) */
+#define DSP5680XX_ONCE_OTX 0x07 /* EOnCE Transmit register (OTX) */
+#define DSP5680XX_ONCE_OPDBR 0x08 /* EOnCE Program Data Bus Register (OPDBR) */
+#define DSP5680XX_ONCE_OTX1 0x09 /* EOnCE Upper Transmit register (OTX1) */
+#define DSP5680XX_ONCE_OPABFR 0x0A /* OnCE Program Address Register—Fetch cycle */
+#define DSP5680XX_ONCE_ORX 0x0B /* EOnCE Receive register (ORX) */
+#define DSP5680XX_ONCE_OCNTR_C 0x0C /* Clear OCNTR */
+#define DSP5680XX_ONCE_ORX1 0x0D /* EOnCE Upper Receive register (ORX1) */
+#define DSP5680XX_ONCE_OTBCR 0x0E /* EOnCE Trace Buffer Control Reg (OTBCR) */
+#define DSP5680XX_ONCE_OPABER 0x10 /* OnCE Program Address Register—Execute cycle */
+#define DSP5680XX_ONCE_OPFIFO 0x11 /* OnCE Program address FIFO */
+#define DSP5680XX_ONCE_OBAR1 0x12 /* EOnCE Breakpoint 1 Unit 0 Address Reg.(OBAR1) */
+#define DSP5680XX_ONCE_OPABDR 0x13 /* OnCE Program Address Register—Decode cycle (OPABDR) */
+ /**
+ * ----------------------------------------------------------------
+ */
+
+#define FLUSH_COUNT_READ_WRITE 8192 /* This value works, higher values (and lower...) may work as well. */
#define FLUSH_COUNT_FLASH 8192
-//----------------------------------------------------------------
-// HFM (flash module) Commands (ref:MC56F801xRM.pdf@159)
-//----------------------------------------------------------------
-#define HFM_ERASE_VERIFY 0x05
+/** ----------------------------------------------------------------
+ * HFM (flash module) Commands (ref:MC56F801xRM.pdf:159)
+ * ----------------------------------------------------------------
+ */
+#define HFM_ERASE_VERIFY 0x05
#define HFM_CALCULATE_DATA_SIGNATURE 0x06
-#define HFM_WORD_PROGRAM 0x20
-#define HFM_PAGE_ERASE 0x40
-#define HFM_MASS_ERASE 0x41
+#define HFM_WORD_PROGRAM 0x20
+#define HFM_PAGE_ERASE 0x40
+#define HFM_MASS_ERASE 0x41
#define HFM_CALCULATE_IFR_BLOCK_SIGNATURE 0x66
-//----------------------------------------------------------------
-
-//----------------------------------------------------------------
-// Flashing (ref:MC56F801xRM.pdf@159)
-//----------------------------------------------------------------
-#define HFM_BASE_ADDR 0x0F400 // In x: mem. (write to S_FILE_DATA_OFFSET+HFM_BASE_ADDR to get data into x: mem.)
-// The following are register addresses, not memory addresses (though all registers are memory mapped)
-#define HFM_CLK_DIV 0x00 // r/w
-#define HFM_CNFG 0x01 // r/w
-#define HFM_SECHI 0x03 // r
-#define HFM_SECLO 0x04 // r
-#define HFM_PROT 0x10 // r/w
-#define HFM_PROTB 0x11 // r/w
-#define HFM_USTAT 0x13 // r/w
-#define HFM_CMD 0x14 // r/w
-#define HFM_DATA 0x18 // r
-#define HFM_OPT1 0x1B // r
-#define HFM_TSTSIG 0x1D // r
+ /**
+ * ----------------------------------------------------------------
+ */
+
+/** ----------------------------------------------------------------
+ * Flashing (ref:MC56F801xRM.pdf:159)
+ * ----------------------------------------------------------------
+ */
+#define HFM_BASE_ADDR 0x0F400 /** In x: mem. (write to S_FILE_DATA_OFFSET+HFM_BASE_ADDR
+ * to get data into x: mem.)
+ */
+/**
+ * The following are register addresses, not memory
+ * addresses (though all registers are memory mapped)
+ */
+#define HFM_CLK_DIV 0x00 /* r/w */
+#define HFM_CNFG 0x01 /* r/w */
+#define HFM_SECHI 0x03 /* r */
+#define HFM_SECLO 0x04 /* r */
+#define HFM_PROT 0x10 /* r/w */
+#define HFM_PROTB 0x11 /* r/w */
+#define HFM_USTAT 0x13 /* r/w */
+#define HFM_CMD 0x14 /* r/w */
+#define HFM_DATA 0x18 /* r */
+#define HFM_OPT1 0x1B /* r */
+#define HFM_TSTSIG 0x1D /* r */
#define HFM_EXEC_COMPLETE 0x40
-// User status register (USTAT) masks (MC56F80XXRM.pdf@6.7.5)
+/* User status register (USTAT) masks (MC56F80XXRM.pdf:6.7.5) */
#define HFM_USTAT_MASK_BLANK 0x4
#define HFM_USTAT_MASK_PVIOL_ACCER 0x30
/**
* The value used on for the FM clock is important to prevent flashing errors and to prevent deterioration of the FM.
* This value was calculated using a spreadsheet tool available on the Freescale website under FAQ 25464.
- *
+ *
*/
-#define HFM_CLK_DEFAULT 0x40
+#define HFM_CLK_DEFAULT 0x27
+/* 0x27 according to freescale cfg, but 0x40 according to freescale spreadsheet... */
#define HFM_FLASH_BASE_ADDR 0x0
-#define HFM_SIZE_BYTES 0x4000 // bytes
-#define HFM_SIZE_WORDS 0x2000 // words
-#define HFM_SECTOR_SIZE 0x200 // Size in bytes
+#define HFM_SIZE_BYTES 0x4000 /* bytes */
+#define HFM_SIZE_WORDS 0x2000 /* words */
+#define HFM_SECTOR_SIZE 0x200 /* Size in bytes */
#define HFM_SECTOR_COUNT 0x20
-// A 16K block in pages of 256 words.
+/* A 16K block in pages of 256 words. */
/**
* Writing HFM_LOCK_FLASH to HFM_LOCK_ADDR_L and HFM_LOCK_ADDR_H will enable security on flash after the next reset.
#define HFM_LOCK_FLASH 0xE70A
#define HFM_LOCK_ADDR_L 0x1FF7
#define HFM_LOCK_ADDR_H 0x1FF8
-//----------------------------------------------------------------
+ /**
+ * ----------------------------------------------------------------
+ */
-//----------------------------------------------------------------
-// Register Memory Map (eonce_rev.1.0_0208081.pdf@16)
-//----------------------------------------------------------------
+/** ----------------------------------------------------------------
+ * Register Memory Map (eonce_rev.1.0_0208081.pdf:16)
+ * ----------------------------------------------------------------
+ */
#define MC568013_EONCE_OBASE_ADDR 0xFF
-// The following are relative to EONCE_OBASE_ADDR (EONCE_OBASE_ADDR<<16 + ...)
-#define MC568013_EONCE_TX_RX_ADDR 0xFFFE //
-#define MC568013_EONCE_TX1_RX1_HIGH_ADDR 0xFFFF // Relative to EONCE_OBASE_ADDR
-#define MC568013_EONCE_OCR 0xFFA0 // Relative to EONCE_OBASE_ADDR
-//----------------------------------------------------------------
-
-//----------------------------------------------------------------
-// SIM addresses & commands (MC56F80xx.h from freescale)
-//----------------------------------------------------------------
+/* The following are relative to EONCE_OBASE_ADDR (EONCE_OBASE_ADDR<<16 + ...) */
+#define MC568013_EONCE_TX_RX_ADDR 0xFFFE
+#define MC568013_EONCE_TX1_RX1_HIGH_ADDR 0xFFFF /* Relative to EONCE_OBASE_ADDR */
+#define MC568013_EONCE_OCR 0xFFA0 /* Relative to EONCE_OBASE_ADDR */
+ /**
+ * ----------------------------------------------------------------
+ */
+
+/** ----------------------------------------------------------------
+ * SIM addresses & commands (MC56F80xx.h from freescale)
+ * ----------------------------------------------------------------
+ */
#define MC568013_SIM_BASE_ADDR 0xF140
#define MC56803x_2x_SIM_BASE_ADDR 0xF100
#define SIM_CMD_RESET 0x10
-//----------------------------------------------------------------
+ /**
+ * ----------------------------------------------------------------
+ */
+
+/**
+ * ----------------------------------------------------------------
+ * ERROR codes - enable automatic parsing of output
+ * ----------------------------------------------------------------
+ */
+#define DSP5680XX_ERROR_UNKNOWN_OR_ERROR_OPENOCD -100
+#define DSP5680XX_ERROR_JTAG_COMM -1
+#define DSP5680XX_ERROR_JTAG_RESET -2
+#define DSP5680XX_ERROR_JTAG_INVALID_TAP -3
+#define DSP5680XX_ERROR_JTAG_DR_LEN_OVERFLOW -4
+#define DSP5680XX_ERROR_INVALID_IR_LEN -5
+#define DSP5680XX_ERROR_JTAG_TAP_ENABLE_MASTER -6
+#define DSP5680XX_ERROR_JTAG_TAP_ENABLE_CORE -7
+#define DSP5680XX_ERROR_JTAG_TAP_FIND_MASTER -8
+#define DSP5680XX_ERROR_JTAG_TAP_FIND_CORE -9
+#define DSP5680XX_ERROR_JTAG_DRSCAN -10
+#define DSP5680XX_ERROR_JTAG_IRSCAN -11
+#define DSP5680XX_ERROR_ENTER_DEBUG_MODE -12
+#define DSP5680XX_ERROR_RESUME -13
+#define DSP5680XX_ERROR_WRITE_WITH_TARGET_RUNNING -14
+#define DSP5680XX_ERROR_INVALID_DATA_SIZE_UNIT -15
+#define DSP5680XX_ERROR_PROTECT_CHECK_INVALID_ARGS -16
+#define DSP5680XX_ERROR_FM_BUSY -17
+#define DSP5680XX_ERROR_FM_CMD_TIMED_OUT -18
+#define DSP5680XX_ERROR_FM_EXEC -19
+#define DSP5680XX_ERROR_FM_SET_CLK -20
+#define DSP5680XX_ERROR_FLASHING_INVALID_WORD_COUNT -21
+#define DSP5680XX_ERROR_FLASHING_CRC -22
+#define DSP5680XX_ERROR_FLASHING -23
+#define DSP5680XX_ERROR_NOT_IMPLEMENTED_STEP -24
+#define DSP5680XX_ERROR_HALT -25
+#define DSP5680XX_ERROR_EXIT_DEBUG_MODE -26
+#define DSP5680XX_ERROR_TARGET_RUNNING -27
+#define DSP5680XX_ERROR_NOT_IN_DEBUG -28
+/**
+ * ----------------------------------------------------------------
+ */
-struct dsp5680xx_common{
- //TODO
- uint32_t stored_pc;
- int flush;
+struct dsp5680xx_common {
+ uint32_t stored_pc;
+ int flush;
+ bool debug_mode_enabled;
};
extern struct dsp5680xx_common dsp5680xx_context;
-static inline struct dsp5680xx_common *target_to_dsp5680xx(struct target *target){
- return target->arch_info;
+static inline struct dsp5680xx_common *target_to_dsp5680xx(struct target
+ *target)
+{
+ return target->arch_info;
}
-/**
+/**
* Writes to flash memory.
- * Does not check if flash is erased, it's up to the user to erase the flash before running this function.
- * The flashing algorithm runs from RAM, reading from a register to which this function writes to. The algorithm is open loop, there is no control to verify that the FM read the register before writing the next data. A closed loop approach was much slower, and the current implementation does not fail, and if it did the crc check would detect it, allowing to flash again.
- *
- * @param target
- * @param buffer
+ * Does not check if flash is erased, it's up to the user to erase the flash before running
+ * this function.
+ * The flashing algorithm runs from RAM, reading from a register to which this function
+ * writes to. The algorithm is open loop, there is no control to verify that the FM read
+ * the register before writing the next data. A closed loop approach was much slower,
+ * and the current implementation does not fail, and if it did the crc check would detect it,
+ * allowing to flash again.
+ *
+ * @param target
+ * @param buffer
* @param address Word addressing.
- * @param count In bytes.
- *
- * @return
- */
-int dsp5680xx_f_wr(struct target * target, uint8_t *buffer, uint32_t address, uint32_t count);
-
-/**
- * The FM has the funcionality of checking if the flash array is erased. This function executes it. It does not support individual sector analysis.
- *
- * @param target
- * @param erased
- * @param sector This parameter is ignored because the FM does not support checking if individual sectors are erased.
- *
- * @return
- */
-int dsp5680xx_f_erase_check(struct target * target,uint8_t * erased, uint32_t sector);
-
-/**
- * Erases either a sector or the complete flash array. If either the range first-last covers the complete array or if @first == 0 and @last == 0 then a mass erase command is executed on the FM. If not, then individual sectors are erased.
- *
- * @param target
- * @param first
- * @param last
- *
- * @return
- */
-int dsp5680xx_f_erase(struct target * target, int first, int last);
-
-/**
- * Reads the memory mapped protection register. A 1 implies the sector is protected, a 0 implies the sector is not protected.
- *
- * @param target
+ * @param count In bytes.
+ * @param is_flash_lock
+ *
+ * @return
+ */
+int dsp5680xx_f_wr(struct target *target, const uint8_t * buffer, uint32_t address,
+ uint32_t count, int is_flash_lock);
+
+/**
+ * The FM has the functionality of checking if the flash array is erased. This function
+ * executes it. It does not support individual sector analysis.
+ *
+ * @param target
+ * @param erased
+ * @param sector This parameter is ignored because the FM does not support checking if
+ * individual sectors are erased.
+ *
+ * @return
+ */
+int dsp5680xx_f_erase_check(struct target *target, uint8_t * erased,
+ uint32_t sector);
+
+/**
+ * Erases either a sector or the complete flash array. If either the range first-last covers
+ * the complete array or if first == 0 and last == 0 then a mass erase command is executed
+ * on the FM. If not, then individual sectors are erased.
+ *
+ * @param target
+ * @param first
+ * @param last
+ *
+ * @return
+ */
+int dsp5680xx_f_erase(struct target *target, int first, int last);
+
+/**
+ * Reads the memory mapped protection register. A 1 implies the sector is protected,
+ * a 0 implies the sector is not protected.
+ *
+ * @param target
* @param protected Data read from the protection register.
- *
- * @return
+ *
+ * @return
*/
-int dsp5680xx_f_protect_check(struct target * target, uint16_t * protected);
+int dsp5680xx_f_protect_check(struct target *target, uint16_t * protected);
-/**
- * Writes the flash security words with a specific value. The chip's security will be enabled after the first reset following the execution of this function.
- *
- * @param target
- *
- * @return
+/**
+ * Writes the flash security words with a specific value. The chip's security will be
+ * enabled after the first reset following the execution of this function.
+ *
+ * @param target
+ *
+ * @return
*/
-int dsp5680xx_f_lock(struct target * target);
+int dsp5680xx_f_lock(struct target *target);
-/**
+/**
* Executes a mass erase command. The must be done from the Master tap.
- * It is up to the user to select the master tap (jtag tapenable dsp5680xx.chp) before running this function.
- * The flash array will be unsecured (and erased) after the first reset following the execution of this function.
- *
- * @param target
- *
- * @return
+ * It is up to the user to select the master tap (jtag tapenable dsp5680xx.chp)
+ * before running this function.
+ * The flash array will be unsecured (and erased) after the first reset following
+ * the execution of this function.
+ *
+ * @param target
+ *
+ * @return
*/
-int dsp5680xx_f_unlock(struct target * target);
+int dsp5680xx_f_unlock(struct target *target);
-#endif // dsp5680xx.h
+#endif /* OPENOCD_TARGET_DSP5680XX_H */
Code Review / openocd.git / blobdiff