*/
static const struct {
unsigned id;
- char *name;
+ const char *name;
unsigned bits;
} armv7m_regs[] = {
{ ARMV7M_R0, "r0", 32 },
}
}
- if (armv7m->post_restore_context)
- armv7m->post_restore_context(target);
-
return ERROR_OK;
}
}
armv7m->load_core_reg_u32(target, ARMV7M_REGISTER_CORE_GP, 15, &pc);
- if (pc != exit_point)
+ if (exit_point && (pc != exit_point))
{
LOG_DEBUG("failed algoritm halted at 0x%" PRIx32 " ", pc);
return ERROR_TARGET_TIMEOUT;
int retval = ERROR_OK;
uint32_t context[ARMV7M_NUM_REGS];
+ /* NOTE: armv7m_run_algorithm requires that each algorithm uses a software breakpoint
+ * at the exit point */
+
if (armv7m_algorithm_info->common_magic != ARMV7M_COMMON_MAGIC)
{
LOG_ERROR("current target isn't an ARMV7M target");
armv7m->core_cache->reg_list[ARMV7M_CONTROL].valid = 1;
}
- /* REVISIT speed things up (3% or so in one case) by requiring
- * algorithms to include a BKPT instruction at each exit point.
- * This eliminates overheads of adding/removing a breakpoint.
- */
-
- /* ARMV7M always runs in Thumb state */
- if ((retval = breakpoint_add(target, exit_point, 2, BKPT_SOFT)) != ERROR_OK)
- {
- LOG_ERROR("can't add breakpoint to finish algorithm execution");
- return ERROR_TARGET_FAILURE;
- }
-
retval = armv7m_run_and_wait(target, entry_point, timeout_ms, exit_point, armv7m);
- breakpoint_remove(target, exit_point);
-
if (retval != ERROR_OK)
{
return retval;
sp = buf_get_u32(armv7m->core_cache->reg_list[ARMV7M_R13].value, 0, 32);
LOG_USER("target halted due to %s, current mode: %s %s\n"
- "xPSR: %#8.8" PRIx32 " pc: %#8.8" PRIx32 " %csp: %#8.8" PRIx32,
+ "xPSR: %#8.8" PRIx32 " pc: %#8.8" PRIx32 " %csp: %#8.8" PRIx32 "%s",
debug_reason_name(target),
armv7m_mode_strings[armv7m->core_mode],
armv7m_exception_string(armv7m->exception_number),
buf_get_u32(arm->cpsr->value, 0, 32),
buf_get_u32(arm->pc->value, 0, 32),
(ctrl & 0x02) ? 'p' : 'm',
- sp);
+ sp,
+ arm->is_semihosting ? ", semihosting" : "");
return ERROR_OK;
}
return cache;
}
+static int armv7m_setup_semihosting(struct target *target, int enable)
+{
+ /* nothing todo for armv7m */
+ return ERROR_OK;
+}
+
/** Sets up target as a generic ARMv7-M core */
int armv7m_init_arch_info(struct target *target, struct armv7m_common *armv7m)
{
arm->core_type = ARM_MODE_THREAD;
arm->arch_info = armv7m;
+ arm->setup_semihosting = armv7m_setup_semihosting;
/* FIXME remove v7m-specific r/w core_reg functions;
* use the generic ARM core support..
struct reg_param reg_params[2];
int retval;
+ /* see contib/loaders/checksum/armv7m_crc.s for src */
+
static const uint16_t cortex_m3_crc_code[] = {
0x4602, /* mov r2, r0 */
0xF04F, 0x30FF, /* mov r0, #0xffffffff */
/* ncomp: */
0x429C, /* cmp r4, r3 */
0xD1E9, /* bne nbyte */
- /* end: */
- 0xE7FE, /* b end */
+ 0xBE00, /* bkpt #0 */
0x1DB7, 0x04C1 /* CRC32XOR: .word 0x04C11DB7 */
};
buf_set_u32(reg_params[0].value, 0, 32, address);
buf_set_u32(reg_params[1].value, 0, 32, count);
+ int timeout = 20000 * (1 + (count / (1024 * 1024)));
+
if ((retval = target_run_algorithm(target, 0, NULL, 2, reg_params,
- crc_algorithm->address, crc_algorithm->address + (sizeof(cortex_m3_crc_code)-6), 20000, &armv7m_info)) != ERROR_OK)
+ crc_algorithm->address, crc_algorithm->address + (sizeof(cortex_m3_crc_code)-6), timeout, &armv7m_info)) != ERROR_OK)
{
LOG_ERROR("error executing cortex_m3 crc algorithm");
destroy_reg_param(®_params[0]);
0xEA02, 0x0203, /* and r2, r2, r3 */
0x3901, /* subs r1, r1, #1 */
0xD1F9, /* bne loop */
- /* end: */
- 0xE7FE, /* b end */
+ 0xBE00, /* bkpt #0 */
};
/* make sure we have a working area */
return ERROR_OK;
}
-/*--------------------------------------------------------------------------*/
-
-/*
- * Only stuff below this line should need to verify that its target
- * is an ARMv7-M node.
- */
-
-
-/*
- * Return the debug ap baseaddress in hexadecimal;
- * no extra output to simplify script processing
- */
-COMMAND_HANDLER(handle_dap_baseaddr_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
-
- if (!is_armv7m(armv7m)) {
- command_print(CMD_CTX, "current target isn't an ARM7-M");
- return ERROR_TARGET_INVALID;
- }
-
- return CALL_COMMAND_HANDLER(dap_baseaddr_command, swjdp);
-}
-
-/*
- * Return the debug ap id in hexadecimal;
- * no extra output to simplify script processing
- */
-COMMAND_HANDLER(handle_dap_apid_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
-
- if (!is_armv7m(armv7m)) {
- command_print(CMD_CTX, "current target isn't an ARM7-M");
- return ERROR_TARGET_INVALID;
- }
-
- return CALL_COMMAND_HANDLER(dap_apid_command, swjdp);
-}
-
-COMMAND_HANDLER(handle_dap_apsel_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
-
- if (!is_armv7m(armv7m)) {
- command_print(CMD_CTX, "current target isn't an ARM7-M");
- return ERROR_TARGET_INVALID;
- }
-
- return CALL_COMMAND_HANDLER(dap_apsel_command, swjdp);
-}
-
-COMMAND_HANDLER(handle_dap_memaccess_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
-
- if (!is_armv7m(armv7m)) {
- command_print(CMD_CTX, "current target isn't an ARM7-M");
- return ERROR_TARGET_INVALID;
- }
-
- return CALL_COMMAND_HANDLER(dap_memaccess_command, swjdp);
-}
-
-
-COMMAND_HANDLER(handle_dap_info_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
- uint32_t apsel;
-
- if (!is_armv7m(armv7m)) {
- command_print(CMD_CTX, "current target isn't an ARM7-M");
- return ERROR_TARGET_INVALID;
- }
-
- switch (CMD_ARGC) {
- case 0:
- apsel = swjdp->apsel;
- break;
- case 1:
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
- break;
- default:
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- return dap_info_command(CMD_CTX, swjdp, apsel);
-}
-
-/* FIXME this table should be part of generic DAP support, and
- * be shared by the ARMv7-A/R and ARMv7-M support ...
- */
-static const struct command_registration armv7m_exec_command_handlers[] = {
- {
- .name = "info",
- .handler = handle_dap_info_command,
- .mode = COMMAND_EXEC,
- .help = "display ROM table for MEM-AP "
- "(default currently selected AP)",
- .usage = "[ap_num]",
- },
- {
- .name = "apsel",
- .handler = handle_dap_apsel_command,
- .mode = COMMAND_EXEC,
- .help = "Set the currently selected AP (default 0) "
- "and display the result",
- .usage = "[ap_num]",
- },
- {
- .name = "apid",
- .handler = handle_dap_apid_command,
- .mode = COMMAND_EXEC,
- .help = "return ID register from AP "
- "(default currently selected AP)",
- .usage = "[ap_num]",
- },
- {
- .name = "baseaddr",
- .handler = handle_dap_baseaddr_command,
- .mode = COMMAND_EXEC,
- .help = "return debug base address from MEM-AP "
- "(default currently selected AP)",
- .usage = "[ap_num]",
- },
+const struct command_registration armv7m_command_handlers[] = {
{
- .name = "memaccess",
- .handler = handle_dap_memaccess_command,
- .mode = COMMAND_EXEC,
- .help = "set/get number of extra tck for MEM-AP memory "
- "bus access [0-255]",
- .usage = "[cycles]",
+ .chain = arm_command_handlers,
},
- COMMAND_REGISTRATION_DONE
-};
-const struct command_registration armv7m_command_handlers[] = {
{
- .name = "dap",
- .mode = COMMAND_EXEC,
- .help = "Cortex DAP command group",
- .chain = armv7m_exec_command_handlers,
+ .chain = dap_command_handlers,
},
COMMAND_REGISTRATION_DONE
};