}
}
-static int dap_setup_accessport_csw(struct adiv5_dap *dap, uint32_t csw)
+static int mem_ap_setup_csw(struct adiv5_ap *ap, uint32_t csw)
{
csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT |
- dap->ap[dap_ap_get_select(dap)].csw_default;
+ ap->csw_default;
- if (csw != dap->ap[dap_ap_get_select(dap)].csw_value) {
+ if (csw != ap->csw_value) {
/* LOG_DEBUG("DAP: Set CSW %x",csw); */
- int retval = dap_queue_ap_write(dap, MEM_AP_REG_CSW, csw);
+ int retval = dap_queue_ap_write(ap->dap, MEM_AP_REG_CSW, csw);
if (retval != ERROR_OK)
return retval;
- dap->ap[dap_ap_get_select(dap)].csw_value = csw;
+ ap->csw_value = csw;
}
return ERROR_OK;
}
-static int dap_setup_accessport_tar(struct adiv5_dap *dap, uint32_t tar)
+static int mem_ap_setup_tar(struct adiv5_ap *ap, uint32_t tar)
{
- if (tar != dap->ap[dap_ap_get_select(dap)].tar_value ||
- (dap->ap[dap_ap_get_select(dap)].csw_value & CSW_ADDRINC_MASK)) {
+ if (tar != ap->tar_value ||
+ (ap->csw_value & CSW_ADDRINC_MASK)) {
/* LOG_DEBUG("DAP: Set TAR %x",tar); */
- int retval = dap_queue_ap_write(dap, MEM_AP_REG_TAR, tar);
+ int retval = dap_queue_ap_write(ap->dap, MEM_AP_REG_TAR, tar);
if (retval != ERROR_OK)
return retval;
- dap->ap[dap_ap_get_select(dap)].tar_value = tar;
+ ap->tar_value = tar;
}
return ERROR_OK;
}
* If the CSW is configured for it, the TAR may be automatically
* incremented after each transfer.
*
- * @todo Rename to reflect it being specifically a MEM-AP function.
- *
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP.
* @param csw MEM-AP Control/Status Word (CSW) register to assign. If this
* matches the cached value, the register is not changed.
* @param tar MEM-AP Transfer Address Register (TAR) to assign. If this
*
* @return ERROR_OK if the transaction was properly queued, else a fault code.
*/
-int dap_setup_accessport(struct adiv5_dap *dap, uint32_t csw, uint32_t tar)
+static int mem_ap_setup_transfer(struct adiv5_ap *ap, uint32_t csw, uint32_t tar)
{
int retval;
- retval = dap_setup_accessport_csw(dap, csw);
+ retval = mem_ap_setup_csw(ap, csw);
if (retval != ERROR_OK)
return retval;
- retval = dap_setup_accessport_tar(dap, tar);
+ retval = mem_ap_setup_tar(ap, tar);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
/**
* Asynchronous (queued) read of a word from memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the word will be stored when the
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-static int mem_ap_read_u32(struct adiv5_ap *ap, uint32_t address,
+int mem_ap_read_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t *value)
{
int retval;
+ dap_ap_select(ap->dap, ap->ap_num);
+
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when reading several consecutive addresses.
*/
- retval = dap_setup_accessport(ap->dap, CSW_32BIT | CSW_ADDRINC_OFF,
+ retval = mem_ap_setup_transfer(ap, CSW_32BIT | CSW_ADDRINC_OFF,
address & 0xFFFFFFF0);
if (retval != ERROR_OK)
return retval;
* Synchronous read of a word from memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the result will be stored.
* @return ERROR_OK for success; *value holds the result.
* Otherwise a fault code.
*/
-static int mem_ap_read_atomic_u32(struct adiv5_ap *ap, uint32_t address,
+int mem_ap_read_atomic_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t *value)
{
int retval;
/**
* Asynchronous (queued) write of a word to memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written to the address when transaction
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-static int mem_ap_write_u32(struct adiv5_ap *ap, uint32_t address,
+int mem_ap_write_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t value)
{
int retval;
+ dap_ap_select(ap->dap, ap->ap_num);
+
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when writing several consecutive addresses.
*/
- retval = dap_setup_accessport(ap->dap, CSW_32BIT | CSW_ADDRINC_OFF,
+ retval = mem_ap_setup_transfer(ap, CSW_32BIT | CSW_ADDRINC_OFF,
address & 0xFFFFFFF0);
if (retval != ERROR_OK)
return retval;
* Synchronous write of a word to memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written.
*
* @return ERROR_OK for success; the data was written. Otherwise a fault code.
*/
-static int mem_ap_write_atomic_u32(struct adiv5_ap *ap, uint32_t address,
+int mem_ap_write_atomic_u32(struct adiv5_ap *ap, uint32_t address,
uint32_t value)
{
int retval = mem_ap_write_u32(ap, address, value);
/**
* Synchronous write of a block of memory, using a specific access size.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param buffer The data buffer to write. No particular alignment is assumed.
* @param size Which access size to use, in bytes. 1, 2 or 4.
* @param count The number of writes to do (in size units, not bytes).
if (ap->unaligned_access_bad && (address % size != 0))
return ERROR_TARGET_UNALIGNED_ACCESS;
- retval = dap_setup_accessport_tar(dap, address ^ addr_xor);
+ dap_ap_select(ap->dap, ap->ap_num);
+
+ retval = mem_ap_setup_tar(ap, address ^ addr_xor);
if (retval != ERROR_OK)
return retval;
if (addrinc && ap->packed_transfers && nbytes >= 4
&& max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
this_size = 4;
- retval = dap_setup_accessport_csw(dap, csw_size | CSW_ADDRINC_PACKED);
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
} else {
- retval = dap_setup_accessport_csw(dap, csw_size | csw_addrincr);
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
}
if (retval != ERROR_OK)
/* Rewrite TAR if it wrapped or we're xoring addresses */
if (addrinc && (addr_xor || (address % ap->tar_autoincr_block < size && nbytes > 0))) {
- retval = dap_setup_accessport_tar(dap, address ^ addr_xor);
+ retval = mem_ap_setup_tar(ap, address ^ addr_xor);
if (retval != ERROR_OK)
break;
}
/**
* Synchronous read of a block of memory, using a specific access size.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param buffer The data buffer to receive the data. No particular alignment is assumed.
* @param size Which access size to use, in bytes. 1, 2 or 4.
* @param count The number of reads to do (in size units, not bytes).
return ERROR_FAIL;
}
- retval = dap_setup_accessport_tar(dap, address);
+ dap_ap_select(ap->dap, ap->ap_num);
+
+ retval = mem_ap_setup_tar(ap, address);
if (retval != ERROR_OK) {
free(read_buf);
return retval;
if (addrinc && ap->packed_transfers && nbytes >= 4
&& max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
this_size = 4;
- retval = dap_setup_accessport_csw(dap, csw_size | CSW_ADDRINC_PACKED);
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
} else {
- retval = dap_setup_accessport_csw(dap, csw_size | csw_addrincr);
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
}
if (retval != ERROR_OK)
break;
/* Rewrite TAR if it wrapped */
if (addrinc && address % ap->tar_autoincr_block < size && nbytes > 0) {
- retval = dap_setup_accessport_tar(dap, address);
+ retval = mem_ap_setup_tar(ap, address);
if (retval != ERROR_OK)
break;
}
return retval;
}
-/*--------------------------------------------------------------------*/
-/* Wrapping function with selection of AP */
-/*--------------------------------------------------------------------*/
-int mem_ap_sel_read_u32(struct adiv5_ap *ap,
- uint32_t address, uint32_t *value)
-{
- dap_ap_select(ap->dap, ap->ap_num);
- return mem_ap_read_u32(ap, address, value);
-}
-
-int mem_ap_sel_write_u32(struct adiv5_ap *ap,
- uint32_t address, uint32_t value)
-{
- dap_ap_select(ap->dap, ap->ap_num);
- return mem_ap_write_u32(ap, address, value);
-}
-
-int mem_ap_sel_read_atomic_u32(struct adiv5_ap *ap,
- uint32_t address, uint32_t *value)
-{
- dap_ap_select(ap->dap, ap->ap_num);
- return mem_ap_read_atomic_u32(ap, address, value);
-}
-
-int mem_ap_sel_write_atomic_u32(struct adiv5_ap *ap,
- uint32_t address, uint32_t value)
-{
- dap_ap_select(ap->dap, ap->ap_num);
- return mem_ap_write_atomic_u32(ap, address, value);
-}
-
-int mem_ap_sel_read_buf(struct adiv5_ap *ap,
+int mem_ap_read_buf(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(ap->dap, ap->ap_num);
return mem_ap_read(ap, buffer, size, count, address, true);
}
-int mem_ap_sel_write_buf(struct adiv5_ap *ap,
+int mem_ap_write_buf(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(ap->dap, ap->ap_num);
return mem_ap_write(ap, buffer, size, count, address, true);
}
-int mem_ap_sel_read_buf_noincr(struct adiv5_ap *ap,
+int mem_ap_read_buf_noincr(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(ap->dap, ap->ap_num);
return mem_ap_read(ap, buffer, size, count, address, false);
}
-int mem_ap_sel_write_buf_noincr(struct adiv5_ap *ap,
+int mem_ap_write_buf_noincr(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
{
- dap_ap_select(ap->dap, ap->ap_num);
return mem_ap_write(ap, buffer, size, count, address, false);
}
/* Number of bits for tar autoincrement, impl. dep. at least 10 */
dap->ap[i].tar_autoincr_block = (1<<10);
}
+ dap->ap_current = -1;
+ dap->ap_bank_value = -1;
+ dap->dp_bank_value = -1;
return dap;
}
/**
* Initialize a DAP. This sets up the power domains, prepares the DP
- * for further use, and arranges to use AP #0 for all AP operations
- * until dap_ap-select() changes that policy.
+ * for further use and activates overrun checking.
*
* @param dap The DAP being initialized.
- *
- * @todo Rename this. We also need an initialization scheme which account
- * for SWD transports not just JTAG; that will need to address differences
- * in layering. (JTAG is useful without any debug target; but not SWD.)
- * And this may not even use an AHB-AP ... e.g. DAP-Lite uses an APB-AP.
*/
-int ahbap_debugport_init(struct adiv5_ap *ap)
+int dap_dp_init(struct adiv5_dap *dap)
{
- /* check that we support packed transfers */
- uint32_t csw, cfg;
int retval;
- struct adiv5_dap *dap = ap->dap;
LOG_DEBUG(" ");
-
/* JTAG-DP or SWJ-DP, in JTAG mode
* ... for SWD mode this is patched as part
* of link switchover
+ * FIXME: This should already be setup by the respective transport specific DAP creation.
*/
if (!dap->ops)
dap->ops = &jtag_dp_ops;
- /* Default MEM-AP setup.
- *
- * REVISIT AP #0 may be an inappropriate default for this.
- * Should we probe, or take a hint from the caller?
- * Presumably we can ignore the possibility of multiple APs.
- */
dap->ap_current = -1;
- dap_ap_select(dap, ap->ap_num);
+ dap->ap_bank_value = -1;
dap->last_read = NULL;
for (size_t i = 0; i < 10; i++) {
retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
if (retval != ERROR_OK)
continue;
+
/* With debug power on we can activate OVERRUN checking */
dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
if (retval != ERROR_OK)
continue;
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
- if (retval != ERROR_OK)
- continue;
-
- retval = dap_queue_ap_read(dap, MEM_AP_REG_CSW, &csw);
- if (retval != ERROR_OK)
- continue;
-
- retval = dap_queue_ap_read(dap, MEM_AP_REG_CFG, &cfg);
- if (retval != ERROR_OK)
- continue;
-
retval = dap_run(dap);
if (retval != ERROR_OK)
continue;
break;
}
+ return retval;
+}
+
+/**
+ * Initialize a DAP. This sets up the power domains, prepares the DP
+ * for further use, and arranges to use AP #0 for all AP operations
+ * until dap_ap-select() changes that policy.
+ *
+ * @param ap The MEM-AP being initialized.
+ */
+int mem_ap_init(struct adiv5_ap *ap)
+{
+ /* check that we support packed transfers */
+ uint32_t csw, cfg;
+ int retval;
+ struct adiv5_dap *dap = ap->dap;
+
+ dap_ap_select(dap, ap->ap_num);
+
+ retval = mem_ap_setup_transfer(ap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_queue_ap_read(dap, MEM_AP_REG_CSW, &csw);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_queue_ap_read(dap, MEM_AP_REG_CFG, &cfg);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
* but just to be sure, try to continue searching if an error does happen.
*/
if ((retval == ERROR_OK) && /* Register read success */
- ((id_val & 0x0FFF0000) == 0x04770000) && /* Jedec codes match */
- ((id_val & 0xF) == type_to_find)) { /* type matches*/
+ ((id_val & IDR_JEP106) == IDR_JEP106_ARM) && /* Jedec codes match */
+ ((id_val & IDR_TYPE) == type_to_find)) { /* type matches*/
LOG_DEBUG("Found %s at AP index: %d (IDR=0x%08" PRIX32 ")",
(type_to_find == AP_TYPE_AHB_AP) ? "AHB-AP" :
ap_old = dap_ap_get_select(dap);
do {
- retval = mem_ap_sel_read_atomic_u32(ap, (dbgbase&0xFFFFF000) |
+ retval = mem_ap_read_atomic_u32(ap, (dbgbase&0xFFFFF000) |
entry_offset, &romentry);
if (retval != ERROR_OK)
return retval;
if (romentry & 0x1) {
uint32_t c_cid1;
- retval = mem_ap_sel_read_atomic_u32(ap, component_base | 0xff4, &c_cid1);
+ retval = mem_ap_read_atomic_u32(ap, component_base | 0xff4, &c_cid1);
if (retval != ERROR_OK) {
LOG_ERROR("Can't read component with base address 0x%" PRIx32
", the corresponding core might be turned off", component_base);
return retval;
}
- retval = mem_ap_sel_read_atomic_u32(ap,
+ retval = mem_ap_read_atomic_u32(ap,
(component_base & 0xfffff000) | 0xfcc,
&devtype);
if (retval != ERROR_OK)
command_print(cmd_ctx, "\t%sROM table in legacy format", tabs);
/* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- retval = mem_ap_sel_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_sel_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_sel_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_sel_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
if (retval != ERROR_OK)
return retval;
- retval = mem_ap_sel_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
+ retval = mem_ap_read_u32(ap, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
/* Now we read ROM table entries from dbgbase&0xFFFFF000) | 0x000 until we get 0x00000000 */
for (entry_offset = 0; ; entry_offset += 4) {
- retval = mem_ap_sel_read_atomic_u32(ap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
+ retval = mem_ap_read_atomic_u32(ap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
if (retval != ERROR_OK)
return retval;
command_print(cmd_ctx, "\t%sROMTABLE[0x%x] = 0x%" PRIx32 "",
component_base = (dbgbase & 0xFFFFF000) + (romentry & 0xFFFFF000);
/* IDs are in last 4K section */
- retval = mem_ap_sel_read_atomic_u32(ap, component_base + 0xFE0, &c_pid0);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFE0, &c_pid0);
if (retval != ERROR_OK) {
command_print(cmd_ctx, "\t%s\tCan't read component with base address 0x%" PRIx32
", the corresponding core might be turned off", tabs, component_base);
continue;
}
c_pid0 &= 0xff;
- retval = mem_ap_sel_read_atomic_u32(ap, component_base + 0xFE4, &c_pid1);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFE4, &c_pid1);
if (retval != ERROR_OK)
return retval;
c_pid1 &= 0xff;
- retval = mem_ap_sel_read_atomic_u32(ap, component_base + 0xFE8, &c_pid2);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFE8, &c_pid2);
if (retval != ERROR_OK)
return retval;
c_pid2 &= 0xff;
- retval = mem_ap_sel_read_atomic_u32(ap, component_base + 0xFEC, &c_pid3);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFEC, &c_pid3);
if (retval != ERROR_OK)
return retval;
c_pid3 &= 0xff;
- retval = mem_ap_sel_read_atomic_u32(ap, component_base + 0xFD0, &c_pid4);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFD0, &c_pid4);
if (retval != ERROR_OK)
return retval;
c_pid4 &= 0xff;
- retval = mem_ap_sel_read_atomic_u32(ap, component_base + 0xFF0, &c_cid0);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFF0, &c_cid0);
if (retval != ERROR_OK)
return retval;
c_cid0 &= 0xff;
- retval = mem_ap_sel_read_atomic_u32(ap, component_base + 0xFF4, &c_cid1);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFF4, &c_cid1);
if (retval != ERROR_OK)
return retval;
c_cid1 &= 0xff;
- retval = mem_ap_sel_read_atomic_u32(ap, component_base + 0xFF8, &c_cid2);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFF8, &c_cid2);
if (retval != ERROR_OK)
return retval;
c_cid2 &= 0xff;
- retval = mem_ap_sel_read_atomic_u32(ap, component_base + 0xFFC, &c_cid3);
+ retval = mem_ap_read_atomic_u32(ap, component_base + 0xFFC, &c_cid3);
if (retval != ERROR_OK)
return retval;
c_cid3 &= 0xff;
unsigned minor;
const char *major = "Reserved", *subtype = "Reserved";
- retval = mem_ap_sel_read_atomic_u32(ap,
+ retval = mem_ap_read_atomic_u32(ap,
(component_base & 0xfffff000) | 0xfcc,
&devtype);
if (retval != ERROR_OK)
static int dap_info_command(struct command_context *cmd_ctx,
struct adiv5_ap *ap)
{
- struct adiv5_dap *dap = ap->dap;
int retval;
uint32_t dbgbase, apid;
int romtable_present = 0;
uint8_t mem_ap;
- uint32_t ap_old;
+ /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
retval = dap_get_debugbase(ap, &dbgbase, &apid);
if (retval != ERROR_OK)
return retval;
- ap_old = dap_ap_get_select(dap);
- dap_ap_select(dap, ap->ap_num);
-
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
- if (apid) {
- switch (apid&0x0F) {
- case 0:
- command_print(cmd_ctx, "\tType is JTAG-AP");
- break;
- case 1:
- command_print(cmd_ctx, "\tType is MEM-AP AHB");
- break;
- case 2:
- command_print(cmd_ctx, "\tType is MEM-AP APB");
- break;
- default:
- command_print(cmd_ctx, "\tUnknown AP type");
- break;
- }
-
- /* NOTE: a MEM-AP may have a single CoreSight component that's
- * not a ROM table ... or have no such components at all.
- */
- if (mem_ap)
- command_print(cmd_ctx, "AP BASE 0x%8.8" PRIx32, dbgbase);
- } else
+ if (apid == 0) {
command_print(cmd_ctx, "No AP found at this ap 0x%x", ap->ap_num);
+ return ERROR_FAIL;
+ }
- romtable_present = ((mem_ap) && (dbgbase != 0xFFFFFFFF));
- if (romtable_present)
- dap_rom_display(cmd_ctx, ap, dbgbase, 0);
- else
- command_print(cmd_ctx, "\tNo ROM table present");
- dap_ap_select(dap, ap_old);
+ switch (apid & (IDR_JEP106 | IDR_TYPE)) {
+ case IDR_JEP106_ARM | AP_TYPE_JTAG_AP:
+ command_print(cmd_ctx, "\tType is JTAG-AP");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_AHB_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP AHB");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_APB_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP APB");
+ break;
+ case IDR_JEP106_ARM | AP_TYPE_AXI_AP:
+ command_print(cmd_ctx, "\tType is MEM-AP AXI");
+ break;
+ default:
+ command_print(cmd_ctx, "\tUnknown AP type");
+ break;
+ }
+
+ /* NOTE: a MEM-AP may have a single CoreSight component that's
+ * not a ROM table ... or have no such components at all.
+ */
+ mem_ap = (apid & IDR_CLASS) == AP_CLASS_MEM_AP;
+ if (mem_ap) {
+ command_print(cmd_ctx, "MEM-AP BASE 0x%8.8" PRIx32, dbgbase);
+
+ romtable_present = dbgbase != 0xFFFFFFFF;
+ if (romtable_present)
+ dap_rom_display(cmd_ctx, ap, dbgbase, 0);
+ else
+ command_print(cmd_ctx, "\tNo ROM table present");
+ }
return ERROR_OK;
}