* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
- * Copyright (C) 2007-2009 Øyvind Harboe *
+ * Copyright (C) 2007-2010 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* Copyright (C) 2008 by Spencer Oliver *
* @param target Pointer to an ARM7/9 target to setup
* @return Result of clearing the watchpoints on the target
*/
-int arm7_9_setup(struct target *target)
+static int arm7_9_setup(struct target *target)
{
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
* queue. For software breakpoints, this will be the status of the
* required memory reads and writes
*/
-int arm7_9_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
+static int arm7_9_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
{
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
int retval = ERROR_OK;
* queue. For software breakpoints, this will be the status of the
* required memory reads and writes
*/
-int arm7_9_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
+static int arm7_9_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
{
int retval = ERROR_OK;
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
{
return retval;
}
+ current_instr = target_buffer_get_u32(target, (uint8_t *)¤t_instr);
if (current_instr == arm7_9->arm_bkpt)
if ((retval = target_write_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr)) != ERROR_OK)
{
* @return Error status if watchpoint set fails or the result of executing the
* JTAG queue
*/
-int arm7_9_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
+static int arm7_9_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
{
int retval = ERROR_OK;
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
* @return Error status while trying to unset the watchpoint or the result of
* executing the JTAG queue
*/
-int arm7_9_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
+static int arm7_9_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
{
int retval = ERROR_OK;
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
/* set RESTART instruction */
- jtag_set_end_state(TAP_IDLE);
if (arm7_9->need_bypass_before_restart) {
arm7_9->need_bypass_before_restart = 0;
- arm_jtag_set_instr(jtag_info, 0xf, NULL);
+ retval = arm_jtag_set_instr(jtag_info, 0xf, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
}
- arm_jtag_set_instr(jtag_info, 0x4, NULL);
+ retval = arm_jtag_set_instr(jtag_info, 0x4, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
long long then = timeval_ms();
int timeout;
* @param target Pointer to the target to issue commands to
* @return Always ERROR_OK
*/
-int arm7_9_execute_fast_sys_speed(struct target *target)
+static int arm7_9_execute_fast_sys_speed(struct target *target)
{
static int set = 0;
static uint8_t check_value[4], check_mask[4];
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
struct arm_jtag *jtag_info = &arm7_9->jtag_info;
struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+ int retval;
/* set RESTART instruction */
- jtag_set_end_state(TAP_IDLE);
if (arm7_9->need_bypass_before_restart) {
arm7_9->need_bypass_before_restart = 0;
- arm_jtag_set_instr(jtag_info, 0xf, NULL);
+ retval = arm_jtag_set_instr(jtag_info, 0xf, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
}
- arm_jtag_set_instr(jtag_info, 0x4, NULL);
+ retval = arm_jtag_set_instr(jtag_info, 0x4, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
if (!set)
{
* @return ERROR_OK unless there are issues with the JTAG queue or when reading
* from the Embedded ICE unit
*/
-int arm7_9_handle_target_request(void *priv)
+static int arm7_9_handle_target_request(void *priv)
{
int retval = ERROR_OK;
struct target *target = priv;
{
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
enum reset_types jtag_reset_config = jtag_get_reset_config();
+ bool use_event = false;
LOG_DEBUG("target->state: %s",
target_state_name(target));
- if (!(jtag_reset_config & RESET_HAS_SRST))
- {
- LOG_ERROR("Can't assert SRST");
+ if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT))
+ use_event = true;
+ else if (!(jtag_reset_config & RESET_HAS_SRST)) {
+ LOG_ERROR("%s: how to reset?", target_name(target));
return ERROR_FAIL;
}
*/
bool srst_asserted = false;
- if (((jtag_reset_config & RESET_SRST_PULLS_TRST) == 0)
+ if (!use_event
+ && !(jtag_reset_config & RESET_SRST_PULLS_TRST)
&& (jtag_reset_config & RESET_SRST_NO_GATING))
{
jtag_add_reset(0, 1);
* certain ARM9 cores (maybe more) - AT91SAM9260
* and STR9
*/
- jtag_add_runtest(1, jtag_get_end_state());
+ jtag_add_runtest(1, TAP_IDLE);
}
else
{
}
}
- /* here we should issue an SRST only, but we may have to assert TRST as well */
- if (jtag_reset_config & RESET_SRST_PULLS_TRST)
- {
- jtag_add_reset(1, 1);
- } else if (!srst_asserted)
- {
- jtag_add_reset(0, 1);
+ if (use_event) {
+ target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
+ } else {
+ /* If we use SRST ... we'd like to issue just SRST, but the
+ * board or chip may be set up so we have to assert TRST as
+ * well. On some chips that combination is equivalent to a
+ * power-up reset, and generally clobbers EICE state.
+ */
+ if (jtag_reset_config & RESET_SRST_PULLS_TRST)
+ jtag_add_reset(1, 1);
+ else if (!srst_asserted)
+ jtag_add_reset(0, 1);
+ jtag_add_sleep(50000);
}
target->state = TARGET_RESET;
- jtag_add_sleep(50000);
-
register_cache_invalidate(arm7_9->armv4_5_common.core_cache);
+ /* REVISIT why isn't standard debug entry logic sufficient?? */
if (target->reset_halt
- && !(jtag_reset_config & RESET_SRST_PULLS_TRST))
+ && (!(jtag_reset_config & RESET_SRST_PULLS_TRST)
+ || use_event))
{
/* debug entry was prepared above */
target->debug_reason = DBG_REASON_DBGRQ;
/* deassert reset lines */
jtag_add_reset(0, 0);
+ /* In case polling is disabled, we need to examine the
+ * target and poll here for this target to work correctly.
+ *
+ * Otherwise, e.g. halt will fail afterwards with bogus
+ * error messages as halt will believe that reset is
+ * still in effect.
+ */
+ if ((retval = target_examine_one(target)) != ERROR_OK)
+ return retval;
+
+ if ((retval = target_poll(target)) != ERROR_OK)
+ {
+ return retval;
+ }
+
enum reset_types jtag_reset_config = jtag_get_reset_config();
if (target->reset_halt && (jtag_reset_config & RESET_SRST_PULLS_TRST) != 0)
{
LOG_WARNING("srst pulls trst - can not reset into halted mode. Issuing halt after reset.");
- /* set up embedded ice registers again */
- if ((retval = target_examine_one(target)) != ERROR_OK)
- return retval;
-
- if ((retval = target_poll(target)) != ERROR_OK)
- {
- return retval;
- }
-
if ((retval = target_halt(target)) != ERROR_OK)
{
return retval;
}
-
}
return retval;
}
* @param target Pointer to the ARM7/9 target to have halt cleared
* @return Always ERROR_OK
*/
-int arm7_9_clear_halt(struct target *target)
+static int arm7_9_clear_halt(struct target *target)
{
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
struct reg *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
armv4_5->cpsr->dirty = 1;
/* start fetching from 0x0 */
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, 0x0);
- armv4_5->core_cache->reg_list[15].dirty = 1;
- armv4_5->core_cache->reg_list[15].valid = 1;
+ buf_set_u32(armv4_5->pc->value, 0, 32, 0x0);
+ armv4_5->pc->dirty = 1;
+ armv4_5->pc->valid = 1;
/* reset registers */
for (i = 0; i <= 14; i++)
return retval;
if (arm7_9->post_debug_entry)
- arm7_9->post_debug_entry(target);
+ {
+ retval = arm7_9->post_debug_entry(target);
+ if (retval != ERROR_OK)
+ return retval;
+ }
return ERROR_OK;
}
* @return Error if the target is not halted, has an invalid core mode, or if
* the JTAG queue fails to execute
*/
-int arm7_9_full_context(struct target *target)
+static int arm7_9_full_context(struct target *target)
{
int i;
int retval;
}
if (!is_arm_mode(armv4_5->core_mode))
+ {
+ LOG_ERROR("not a valid arm core mode - communication failure?");
return ERROR_FAIL;
+ }
/* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
* SYS shares registers with User, so we don't touch SYS
* @return Error status if the target is not halted or the core mode in the
* armv4_5 struct is invalid.
*/
-int arm7_9_restore_context(struct target *target)
+static int arm7_9_restore_context(struct target *target)
{
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
struct arm *armv4_5 = &arm7_9->armv4_5_common;
arm7_9->pre_restore_context(target);
if (!is_arm_mode(armv4_5->core_mode))
+ {
+ LOG_ERROR("not a valid arm core mode - communication failure?");
return ERROR_FAIL;
+ }
/* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
* SYS shares registers with User, so we don't touch SYS
}
/* restore PC */
- LOG_DEBUG("writing PC with value 0x%8.8" PRIx32 "", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- arm7_9->write_pc(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- armv4_5->core_cache->reg_list[15].dirty = 0;
-
- if (arm7_9->post_restore_context)
- arm7_9->post_restore_context(target);
+ LOG_DEBUG("writing PC with value 0x%8.8" PRIx32,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
+ arm7_9->write_pc(target, buf_get_u32(armv4_5->pc->value, 0, 32));
+ armv4_5->pc->dirty = 0;
return ERROR_OK;
}
* @param target Pointer to the ARM7/9 target to be restarted
* @return Result of executing the JTAG queue
*/
-int arm7_9_restart_core(struct target *target)
+static int arm7_9_restart_core(struct target *target)
{
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
struct arm_jtag *jtag_info = &arm7_9->jtag_info;
+ int retval;
/* set RESTART instruction */
- jtag_set_end_state(TAP_IDLE);
if (arm7_9->need_bypass_before_restart) {
arm7_9->need_bypass_before_restart = 0;
- arm_jtag_set_instr(jtag_info, 0xf, NULL);
+
+ retval = arm_jtag_set_instr(jtag_info, 0xf, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
}
- arm_jtag_set_instr(jtag_info, 0x4, NULL);
+ retval = arm_jtag_set_instr(jtag_info, 0x4, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
- jtag_add_runtest(1, jtag_set_end_state(TAP_IDLE));
+ jtag_add_runtest(1, TAP_IDLE);
return jtag_execute_queue();
}
*
* @param target Pointer to the ARM7/9 target to enable watchpoints on
*/
-void arm7_9_enable_watchpoints(struct target *target)
+static void arm7_9_enable_watchpoints(struct target *target)
{
struct watchpoint *watchpoint = target->watchpoints;
*
* @param target Pointer to the ARM7/9 target to enable breakpoints on
*/
-void arm7_9_enable_breakpoints(struct target *target)
+static void arm7_9_enable_breakpoints(struct target *target)
{
struct breakpoint *breakpoint = target->breakpoints;
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
+ buf_set_u32(armv4_5->pc->value, 0, 32, address);
uint32_t current_pc;
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
/* the front-end may request us not to handle breakpoints */
if (handle_breakpoints)
{
- if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
+ breakpoint = breakpoint_find(target,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
+ if (breakpoint != NULL)
{
LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 " (id: %d)", breakpoint->address, breakpoint->unique_id );
if ((retval = arm7_9_unset_breakpoint(target, breakpoint)) != ERROR_OK)
return err;
}
- arm7_9_debug_entry(target);
- LOG_DEBUG("new PC after step: 0x%8.8" PRIx32 "", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ retval = arm7_9_debug_entry(target);
+ if (retval != ERROR_OK)
+ return retval;
+ LOG_DEBUG("new PC after step: 0x%8.8" PRIx32,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
LOG_DEBUG("set breakpoint at 0x%8.8" PRIx32 "", breakpoint->address);
if ((retval = arm7_9_set_breakpoint(target, breakpoint)) != ERROR_OK)
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
struct arm *armv4_5 = &arm7_9->armv4_5_common;
uint32_t current_pc;
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
if (next_pc != current_pc)
{
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
+ buf_set_u32(armv4_5->pc->value, 0, 32, address);
- uint32_t current_pc;
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ uint32_t current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
/* the front-end may request us not to handle breakpoints */
if (handle_breakpoints)
- if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
- if ((retval = arm7_9_unset_breakpoint(target, breakpoint)) != ERROR_OK)
- {
- return retval;
- }
+ breakpoint = breakpoint_find(target, current_pc);
+ if (breakpoint != NULL) {
+ retval = arm7_9_unset_breakpoint(target, breakpoint);
+ if (retval != ERROR_OK)
+ return retval;
+ }
target->debug_reason = DBG_REASON_SINGLESTEP;
{
target->state = TARGET_UNKNOWN;
} else {
- arm7_9_debug_entry(target);
+ retval = arm7_9_debug_entry(target);
+ if (retval != ERROR_OK)
+ return retval;
if ((retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED)) != ERROR_OK)
{
return retval;
return ERROR_OK;
}
-int arm7_9_write_memory(struct target *target, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
+int arm7_9_write_memory(struct target *target, uint32_t address, uint32_t size, uint32_t count, const uint8_t *buffer)
{
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
struct arm *armv4_5 = &arm7_9->armv4_5_common;
if (arm7_9->fast_memory_access)
retval = arm7_9_execute_fast_sys_speed(target);
else
+ {
retval = arm7_9_execute_sys_speed(target);
+
+ /*
+ * if memory writes are made when the clock is running slow
+ * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
+ * processor operations after a "reset halt" or "reset init",
+ * need to immediately stroke the keep alive or will end up with
+ * gdb "keep alive not sent error message" problem.
+ */
+
+ keep_alive();
+ }
+
if (retval != ERROR_OK)
{
return retval;
if (arm7_9->fast_memory_access)
retval = arm7_9_execute_fast_sys_speed(target);
else
+ {
retval = arm7_9_execute_sys_speed(target);
+
+ /*
+ * if memory writes are made when the clock is running slow
+ * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
+ * processor operations after a "reset halt" or "reset init",
+ * need to immediately stroke the keep alive or will end up with
+ * gdb "keep alive not sent error message" problem.
+ */
+
+ keep_alive();
+ }
+
if (retval != ERROR_OK)
{
return retval;
if (arm7_9->fast_memory_access)
retval = arm7_9_execute_fast_sys_speed(target);
else
- retval = arm7_9_execute_sys_speed(target);
+ {
+ retval = arm7_9_execute_sys_speed(target);
+
+ /*
+ * if memory writes are made when the clock is running slow
+ * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
+ * processor operations after a "reset halt" or "reset init",
+ * need to immediately stroke the keep alive or will end up with
+ * gdb "keep alive not sent error message" problem.
+ */
+
+ keep_alive();
+ }
+
if (retval != ERROR_OK)
{
return retval;
}
static int dcc_count;
-static uint8_t *dcc_buffer;
+static const uint8_t *dcc_buffer;
static int arm7_9_dcc_completion(struct target *target, uint32_t exit_point, int timeout_ms, void *arch_info)
{
int little = target->endianness == TARGET_LITTLE_ENDIAN;
int count = dcc_count;
- uint8_t *buffer = dcc_buffer;
+ const uint8_t *buffer = dcc_buffer;
if (count > 2)
{
/* Handle first & last using standard embeddedice_write_reg and the middle ones w/the
0xeafffff9 /* b w */
};
-int arm7_9_bulk_write_memory(struct target *target, uint32_t address, uint32_t count, uint8_t *buffer)
+int arm7_9_bulk_write_memory(struct target *target, uint32_t address, uint32_t count, const uint8_t *buffer)
{
int retval;
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
LOG_WARNING("NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.");
}
+ if (get_target_reset_nag() && (target->working_area_size == 0))
+ {
+ LOG_WARNING("NOTE! Severe performance degradation without working memory enabled.");
+ }
+
+ if (get_target_reset_nag() && !arm7_9->fast_memory_access)
+ {
+ LOG_WARNING("NOTE! Severe performance degradation without fast memory access enabled. Type 'help fast'.");
+ }
+
return ERROR_OK;
}
return ERROR_OK;
}
-COMMAND_HANDLER(handle_arm7_9_semihosting_command)
+static int arm7_9_setup_semihosting(struct target *target, int enable)
{
- struct target *target = get_current_target(CMD_CTX);
struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
if (!is_arm7_9(arm7_9))
{
- command_print(CMD_CTX, "current target isn't an ARM7/ARM9 target");
+ LOG_USER("current target isn't an ARM7/ARM9 target");
return ERROR_TARGET_INVALID;
}
- if (CMD_ARGC > 0)
- {
- int semihosting;
-
- COMMAND_PARSE_ENABLE(CMD_ARGV[0], semihosting);
-
- if (!target_was_examined(target))
- {
- LOG_ERROR("Target not examined yet");
- return ERROR_FAIL;
- }
-
- if (arm7_9->has_vector_catch) {
- struct reg *vector_catch = &arm7_9->eice_cache
- ->reg_list[EICE_VEC_CATCH];
-
- if (!vector_catch->valid)
- embeddedice_read_reg(vector_catch);
- buf_set_u32(vector_catch->value, 2, 1, semihosting);
- embeddedice_store_reg(vector_catch);
- } else {
- /* TODO: allow optional high vectors and/or BKPT_HARD */
- if (semihosting)
- breakpoint_add(target, 8, 4, BKPT_SOFT);
- else
- breakpoint_remove(target, 8);
- }
-
- /* FIXME never let that "catch" be dropped! */
- arm7_9->armv4_5_common.is_semihosting = semihosting;
+ if (arm7_9->has_vector_catch) {
+ struct reg *vector_catch = &arm7_9->eice_cache
+ ->reg_list[EICE_VEC_CATCH];
+ if (!vector_catch->valid)
+ embeddedice_read_reg(vector_catch);
+ buf_set_u32(vector_catch->value, 2, 1, enable);
+ embeddedice_store_reg(vector_catch);
+ } else {
+ /* TODO: allow optional high vectors and/or BKPT_HARD */
+ if (enable)
+ breakpoint_add(target, 8, 4, BKPT_SOFT);
+ else
+ breakpoint_remove(target, 8);
}
- command_print(CMD_CTX, "semihosting is %s",
- arm7_9->armv4_5_common.is_semihosting
- ? "enabled" : "disabled");
-
return ERROR_OK;
}
armv4_5->read_core_reg = arm7_9_read_core_reg;
armv4_5->write_core_reg = arm7_9_write_core_reg;
armv4_5->full_context = arm7_9_full_context;
+ armv4_5->setup_semihosting = arm7_9_setup_semihosting;
retval = arm_init_arch_info(target, armv4_5);
if (retval != ERROR_OK)
.usage = "['enable'|'disable']",
.help = "use DCC downloads for larger memory writes",
},
- {
- "semihosting",
- .handler = handle_arm7_9_semihosting_command,
- .mode = COMMAND_EXEC,
- .usage = "['enable'|'disable']",
- .help = "activate support for semihosting operations",
- },
COMMAND_REGISTRATION_DONE
};
const struct command_registration arm7_9_command_handlers[] = {
Code Review / openocd.git / blobdiff