/* REVISIT no error handling here! */
-static void arm11_add_ir_scan_vc(int num_fields, struct scan_field *fields,
+static void arm11_add_ir_scan_vc(struct jtag_tap *tap, struct scan_field *fields,
tap_state_t state)
{
if (cmd_queue_cur_state == TAP_IRPAUSE)
jtag_add_pathmove(ARRAY_SIZE(arm11_move_pi_to_si_via_ci), arm11_move_pi_to_si_via_ci);
- jtag_add_ir_scan(num_fields, fields, state);
+ jtag_add_ir_scan(tap, fields, state);
}
static const tap_state_t arm11_move_pd_to_sd_via_cd[] =
};
/* REVISIT no error handling here! */
-void arm11_add_dr_scan_vc(int num_fields, struct scan_field *fields,
+void arm11_add_dr_scan_vc(struct jtag_tap *tap, int num_fields, struct scan_field *fields,
tap_state_t state)
{
if (cmd_queue_cur_state == TAP_DRPAUSE)
jtag_add_pathmove(ARRAY_SIZE(arm11_move_pd_to_sd_via_cd), arm11_move_pd_to_sd_via_cd);
- jtag_add_dr_scan(num_fields, fields, state);
+ jtag_add_dr_scan(tap, num_fields, fields, state);
}
void arm11_setup_field(struct arm11_common *arm11, int num_bits,
void *out_data, void *in_data, struct scan_field *field)
{
- field->tap = arm11->arm.target->tap;
field->num_bits = num_bits;
field->out_value = out_data;
field->in_value = in_data;
arm11_setup_field(arm11, 5, &instr, NULL, &field);
- arm11_add_ir_scan_vc(1, &field, state == ARM11_TAP_DEFAULT ? TAP_IRPAUSE : state);
+ arm11_add_ir_scan_vc(arm11->arm.target->tap, &field, state == ARM11_TAP_DEFAULT ? TAP_IRPAUSE : state);
}
/** Verify data shifted out from Scan Chain Register (SCREG). */
uint8_t tmp[1];
arm11_setup_field(arm11, 5, &chain, &tmp, &field);
- arm11_add_dr_scan_vc(1, &field, state == ARM11_TAP_DEFAULT ? TAP_DRPAUSE : state);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, 1, &field, state == ARM11_TAP_DEFAULT ? TAP_DRPAUSE : state);
jtag_execute_queue_noclear();
arm11_setup_field(arm11, 32, &inst, NULL, itr + 0);
arm11_setup_field(arm11, 1, NULL, flag, itr + 1);
- arm11_add_dr_scan_vc(ARRAY_SIZE(itr), itr, state);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(itr), itr, state);
}
/**
arm11_setup_field(arm11, 32, NULL, &dscr, &chain1_field);
- arm11_add_dr_scan_vc(1, &chain1_field, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, 1, &chain1_field, TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
arm11_setup_field(arm11, 32, &dscr, NULL, &chain1_field);
- arm11_add_dr_scan_vc(1, &chain1_field, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, 1, &chain1_field, TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
{
Data = *data;
- arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, jtag_set_end_state(TAP_IDLE));
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(chain5_fields), chain5_fields, TAP_IDLE);
CHECK_RETVAL(jtag_execute_queue());
{
Data = 0;
- arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
TAP_DREXIT2, TAP_DRUPDATE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE, TAP_DRSHIFT
};
-
-
-/** Execute one instruction via ITR repeatedly while
- * passing data to the core via DTR on each execution.
- *
- * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
- * is set, the ITR Ready flag is set (as seen on the previous entry to
- * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
- *
- * No Ready check during transmission.
- *
- * The executed instruction \em must read data from DTR.
- *
- * \pre arm11_run_instr_data_prepare() / arm11_run_instr_data_finish() block
- *
- * \param arm11 Target state variable.
- * \param opcode ARM opcode
- * \param data Pointer to the data words to be passed to the core
- * \param count Number of data words and instruction repetitions
- *
+/* This inner loop can be implemented by the minidriver, oftentimes in hardware... The
+ * minidriver can call the default implementation as a fallback or implement it
+ * from scratch.
*/
-int arm11_run_instr_data_to_core_noack(struct arm11_common * arm11, uint32_t opcode, uint32_t * data, size_t count)
+int arm11_run_instr_data_to_core_noack_inner_default(struct jtag_tap * tap, uint32_t opcode, uint32_t * data, size_t count)
{
- arm11_add_IR(arm11, ARM11_ITRSEL, ARM11_TAP_DEFAULT);
-
- arm11_add_debug_INST(arm11, opcode, NULL, TAP_DRPAUSE);
+ struct scan_field chain5_fields[3];
- arm11_add_IR(arm11, ARM11_EXTEST, ARM11_TAP_DEFAULT);
+ chain5_fields[0].num_bits = 32;
+ chain5_fields[0].out_value = NULL; /*&Data*/
+ chain5_fields[0].in_value = NULL;
- struct scan_field chain5_fields[3];
+ chain5_fields[1].num_bits = 1;
+ chain5_fields[1].out_value = NULL;
+ chain5_fields[1].in_value = NULL; /*&Ready*/
- arm11_setup_field(arm11, 32, NULL/*&Data*/, NULL, chain5_fields + 0);
- arm11_setup_field(arm11, 1, NULL, NULL /*&Ready*/, chain5_fields + 1);
- arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 2);
+ chain5_fields[2].num_bits = 1;
+ chain5_fields[2].out_value = NULL;
+ chain5_fields[2].in_value = NULL;
uint8_t *Readies;
- unsigned readiesNum = count + 1;
+ unsigned readiesNum = count;
unsigned bytes = sizeof(*Readies)*readiesNum;
Readies = (uint8_t *) malloc(bytes);
}
uint8_t * ReadyPos = Readies;
-
while (count--)
{
chain5_fields[0].out_value = (void *)(data++);
chain5_fields[1].in_value = ReadyPos++;
- if (count)
+ if (count > 0)
{
- jtag_add_dr_scan(ARRAY_SIZE(chain5_fields), chain5_fields, jtag_set_end_state(TAP_DRPAUSE));
+ jtag_add_dr_scan(tap, ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
jtag_add_pathmove(ARRAY_SIZE(arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay),
arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay);
- }
- else
+ } else
{
- jtag_add_dr_scan(ARRAY_SIZE(chain5_fields), chain5_fields, jtag_set_end_state(TAP_IDLE));
+ jtag_add_dr_scan(tap, ARRAY_SIZE(chain5_fields), chain5_fields, TAP_IDLE);
}
}
- arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
-
- chain5_fields[0].out_value = 0;
- chain5_fields[1].in_value = ReadyPos++;
-
- arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
-
int retval = jtag_execute_queue();
if (retval == ERROR_OK)
{
}
if (error_count > 0 )
+ {
LOG_ERROR("%u words out of %u not transferred",
error_count, readiesNum);
-
+ retval = ERROR_FAIL;
+ }
}
-
free(Readies);
return retval;
}
+int arm11_run_instr_data_to_core_noack_inner(struct jtag_tap * tap, uint32_t opcode, uint32_t * data, size_t count);
+
+#ifndef HAVE_JTAG_MINIDRIVER_H
+int arm11_run_instr_data_to_core_noack_inner(struct jtag_tap * tap, uint32_t opcode, uint32_t * data, size_t count)
+{
+ return arm11_run_instr_data_to_core_noack_inner_default(tap, opcode, data, count);
+}
+#endif
+
+/** Execute one instruction via ITR repeatedly while
+ * passing data to the core via DTR on each execution.
+ *
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
+ *
+ * No Ready check during transmission.
+ *
+ * The executed instruction \em must read data from DTR.
+ *
+ * \pre arm11_run_instr_data_prepare() / arm11_run_instr_data_finish() block
+ *
+ * \param arm11 Target state variable.
+ * \param opcode ARM opcode
+ * \param data Pointer to the data words to be passed to the core
+ * \param count Number of data words and instruction repetitions
+ *
+ */
+int arm11_run_instr_data_to_core_noack(struct arm11_common * arm11, uint32_t opcode, uint32_t * data, size_t count)
+{
+ arm11_add_IR(arm11, ARM11_ITRSEL, ARM11_TAP_DEFAULT);
+
+ arm11_add_debug_INST(arm11, opcode, NULL, TAP_DRPAUSE);
+
+ arm11_add_IR(arm11, ARM11_EXTEST, ARM11_TAP_DEFAULT);
+
+ int retval = arm11_run_instr_data_to_core_noack_inner(arm11->arm.target->tap, opcode, data, count);
+
+ if (retval != ERROR_OK)
+ return retval;
+
+ arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
+
+ struct scan_field chain5_fields[3];
+
+ arm11_setup_field(arm11, 32, NULL/*&Data*/, NULL, chain5_fields + 0);
+ arm11_setup_field(arm11, 1, NULL, NULL /*&Ready*/, chain5_fields + 1);
+ arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 2);
+
+ uint8_t ready_flag;
+ chain5_fields[1].in_value = &ready_flag;
+
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
+
+ retval = jtag_execute_queue();
+ if (retval == ERROR_OK)
+ {
+ if (ready_flag != 1)
+ {
+ LOG_ERROR("last word not transferred");
+ retval = ERROR_FAIL;
+ }
+ }
+
+ return retval;
+}
+
/** Execute an instruction via ITR while handing data into the core via DTR.
*
int i = 0;
do
{
- arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, count ? TAP_IDLE : TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(chain5_fields), chain5_fields, count ? TAP_IDLE : TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
}
/* Timeout here so we don't get stuck. */
- int i = 0;
+ int i_n = 0;
while (1)
{
JTAG_DEBUG("SC7 <= c%-3d Data %08x %s",
(unsigned) DataOut,
nRW ? "write" : "read");
- arm11_add_dr_scan_vc(ARRAY_SIZE(chain7_fields),
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(chain7_fields),
chain7_fields, TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
long long then = 0;
- if (i == 1000)
+ if (i_n == 1000)
{
then = timeval_ms();
}
- if (i >= 1000)
+ if (i_n >= 1000)
{
if ((timeval_ms()-then) > 1000)
{
}
}
- i++;
+ i_n++;
}
if (!nRW)
* \param arm11 Target state variable.
*
*/
-void arm11_sc7_clear_vbw(struct arm11_common * arm11)
+int arm11_sc7_clear_vbw(struct arm11_common * arm11)
{
size_t clear_bw_size = arm11->brp + 1;
struct arm11_sc7_action *clear_bw = malloc(sizeof(struct arm11_sc7_action) * clear_bw_size);
(pos++)->address = ARM11_SC7_VCR;
- arm11_sc7_run(arm11, clear_bw, clear_bw_size);
+ int retval;
+ retval = arm11_sc7_run(arm11, clear_bw, clear_bw_size);
free (clear_bw);
+
+ return retval;
}
/** Write VCR register
* \param arm11 Target state variable.
* \param value Value to be written
*/
-void arm11_sc7_set_vcr(struct arm11_common * arm11, uint32_t value)
+int arm11_sc7_set_vcr(struct arm11_common * arm11, uint32_t value)
{
struct arm11_sc7_action set_vcr;
set_vcr.address = ARM11_SC7_VCR;
set_vcr.value = value;
- arm11_sc7_run(arm11, &set_vcr, 1);
+ return arm11_sc7_run(arm11, &set_vcr, 1);
}
* and watchpoint operations instead of running them right away. Since we
* pre-allocated our vector, we don't need to worry about space.
*/
-static int arm11_bpwp_enable(struct arm_dpm *dpm, unsigned index,
+static int arm11_bpwp_enable(struct arm_dpm *dpm, unsigned index_t,
uint32_t addr, uint32_t control)
{
struct arm11_common *arm11 = dpm_to_arm11(dpm);
action[0].value = addr;
action[1].value = control;
- switch (index) {
+ switch (index_t) {
case 0 ... 15:
- action[0].address = ARM11_SC7_BVR0 + index;
- action[1].address = ARM11_SC7_BCR0 + index;
+ action[0].address = ARM11_SC7_BVR0 + index_t;
+ action[1].address = ARM11_SC7_BCR0 + index_t;
break;
case 16 ... 32:
- index -= 16;
- action[0].address = ARM11_SC7_WVR0 + index;
- action[1].address = ARM11_SC7_WCR0 + index;
+ index_t -= 16;
+ action[0].address = ARM11_SC7_WVR0 + index_t;
+ action[1].address = ARM11_SC7_WCR0 + index_t;
break;
default:
return ERROR_FAIL;
return ERROR_OK;
}
-static int arm11_bpwp_disable(struct arm_dpm *dpm, unsigned index)
+static int arm11_bpwp_disable(struct arm_dpm *dpm, unsigned index_t)
{
struct arm11_common *arm11 = dpm_to_arm11(dpm);
struct arm11_sc7_action *action;
action[0].write = true;
action[0].value = 0;
- switch (index) {
+ switch (index_t) {
case 0 ... 15:
- action[0].address = ARM11_SC7_BCR0 + index;
+ action[0].address = ARM11_SC7_BCR0 + index_t;
break;
case 16 ... 32:
- index -= 16;
- action[0].address = ARM11_SC7_WCR0 + index;
+ index_t -= 16;
+ action[0].address = ARM11_SC7_WCR0 + index_t;
break;
default:
return ERROR_FAIL;
Code Review / openocd.git / blobdiff