* *
* Copyright (C) 2008 Georg Acher <acher@in.tum.de> *
* *
+ * Copyright (C) 2009 David Brownell *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
#include "target_type.h"
#include "algorithm.h"
#include "register.h"
+#include "arm_opcodes.h"
#if 0
#endif
-/* FIXME none of these flags should be global to all ARM11 cores!
- * Most of them shouldn't exist at all, once the code works...
- */
-static bool arm11_config_memwrite_burst = true;
-static bool arm11_config_memwrite_error_fatal = true;
-static uint32_t arm11_vcr = 0;
-static bool arm11_config_step_irq_enable = false;
-static bool arm11_config_hardware_step = false;
-
static int arm11_step(struct target *target, int current,
uint32_t address, int handle_breakpoints);
static int arm11_check_init(struct arm11_common *arm11)
{
CHECK_RETVAL(arm11_read_DSCR(arm11));
- LOG_DEBUG("DSCR %08x", (unsigned) arm11->dscr);
if (!(arm11->dscr & DSCR_HALT_DBG_MODE))
{
+ LOG_DEBUG("DSCR %08x", (unsigned) arm11->dscr);
LOG_DEBUG("Bringing target into debug mode");
arm11->dscr |= DSCR_HALT_DBG_MODE;
- arm11_write_DSCR(arm11, arm11->dscr);
+ CHECK_RETVAL(arm11_write_DSCR(arm11, arm11->dscr));
/* add further reset initialization here */
*/
arm11->arm.target->state = TARGET_HALTED;
- arm11->arm.target->debug_reason =
- arm11_get_DSCR_debug_reason(arm11->dscr);
+ arm_dpm_report_dscr(arm11->arm.dpm, arm11->dscr);
}
else
{
arm11->arm.target->debug_reason = DBG_REASON_NOTHALTED;
}
- arm11_sc7_clear_vbw(arm11);
+ CHECK_RETVAL(arm11_sc7_clear_vbw(arm11));
}
return ERROR_OK;
int retval;
arm11->arm.target->state = TARGET_HALTED;
- arm11->arm.target->debug_reason =
- arm11_get_DSCR_debug_reason(arm11->dscr);
+ arm_dpm_report_dscr(arm11->arm.dpm, arm11->dscr);
/* REVISIT entire cache should already be invalid !!! */
register_cache_invalidate(arm11->arm.core_cache);
arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 1);
arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 2);
- arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
}
* but not to issue ITRs(?). The ARMv7 arch spec says it's required
* for executing instructions via ITR.
*/
- arm11_write_DSCR(arm11, DSCR_ITR_EN | arm11->dscr);
+ CHECK_RETVAL(arm11_write_DSCR(arm11, DSCR_ITR_EN | arm11->dscr));
/* From the spec:
*/
retval = arm_dpm_read_current_registers(&arm11->dpm);
if (retval != ERROR_OK)
- LOG_ERROR("DPM REG READ -- fail %d", retval);
+ LOG_ERROR("DPM REG READ -- fail");
retval = arm11_run_instr_data_prepare(arm11);
if (retval != ERROR_OK)
}
+ if (arm11->arm.target->debug_reason == DBG_REASON_WATCHPOINT) {
+ uint32_t wfar;
+
+ /* MRC p15, 0, <Rd>, c6, c0, 1 ; Read WFAR */
+ retval = arm11_run_instr_data_from_core_via_r0(arm11,
+ ARMV4_5_MRC(15, 0, 0, 6, 0, 1),
+ &wfar);
+ if (retval != ERROR_OK)
+ return retval;
+ arm_dpm_report_wfar(arm11->arm.dpm, wfar);
+ }
+
+
retval = arm11_run_instr_data_finish(arm11);
if (retval != ERROR_OK)
return retval;
/* restore CPSR, PC, and R0 ... after flushing any modified
* registers.
*/
- retval = arm_dpm_write_dirty_registers(&arm11->dpm, bpwp);
+ CHECK_RETVAL(arm_dpm_write_dirty_registers(&arm11->dpm, bpwp));
+
+ CHECK_RETVAL(arm11_bpwp_flush(arm11));
register_cache_invalidate(arm11->arm.core_cache);
/* restore DSCR */
- arm11_write_DSCR(arm11, arm11->dscr);
+ CHECK_RETVAL(arm11_write_DSCR(arm11, arm11->dscr));
/* maybe restore rDTR */
if (arm11->is_rdtr_saved)
arm11_setup_field(arm11, 1, &Ready, NULL, chain5_fields + 1);
arm11_setup_field(arm11, 1, &Valid, NULL, chain5_fields + 2);
- arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
}
/* now processor is ready to RESTART */
return retval;
target_call_event_callbacks(target,
- old_state == TARGET_DEBUG_RUNNING ? TARGET_EVENT_DEBUG_HALTED : TARGET_EVENT_HALTED);
+ (old_state == TARGET_DEBUG_RUNNING)
+ ? TARGET_EVENT_DEBUG_HALTED
+ : TARGET_EVENT_HALTED);
}
}
else
/* architecture specific status reply */
static int arm11_arch_state(struct target *target)
{
+ struct arm11_common *arm11 = target_to_arm11(target);
int retval;
- retval = armv4_5_arch_state(target);
+ retval = arm_arch_state(target);
/* REVISIT also display ARM11-specific MMU and cache status ... */
+ if (target->debug_reason == DBG_REASON_WATCHPOINT)
+ LOG_USER("Watchpoint triggered at PC %#08x",
+ (unsigned) arm11->dpm.wp_pc);
+
return retval;
}
enum target_state old_state = target->state;
- arm11_debug_entry(arm11);
+ CHECK_RETVAL(arm11_debug_entry(arm11));
CHECK_RETVAL(
target_call_event_callbacks(target,
static uint32_t
arm11_nextpc(struct arm11_common *arm11, int current, uint32_t address)
{
- void *value = arm11->arm.core_cache->reg_list[15].value;
+ void *value = arm11->arm.pc->value;
if (!current)
buf_set_u32(value, 0, 32, address);
LOG_DEBUG("RESUME PC %08" PRIx32 "%s", address, !current ? "!" : "");
/* clear breakpoints/watchpoints and VCR*/
- arm11_sc7_clear_vbw(arm11);
+ CHECK_RETVAL(arm11_sc7_clear_vbw(arm11));
if (!debug_execution)
target_free_all_working_areas(target);
- /* Set up breakpoints */
- if (handle_breakpoints)
- {
- /* check if one matches PC and step over it if necessary */
-
- struct breakpoint * bp;
+ /* Should we skip over breakpoints matching the PC? */
+ if (handle_breakpoints) {
+ struct breakpoint *bp;
for (bp = target->breakpoints; bp; bp = bp->next)
{
break;
}
}
+ }
- /* set all breakpoints */
-
+ /* activate all breakpoints */
+ if (true) {
+ struct breakpoint *bp;
unsigned brp_num = 0;
for (bp = target->breakpoints; bp; bp = bp->next)
brp[1].address = ARM11_SC7_BCR0 + brp_num;
brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (0 << 21);
- arm11_sc7_run(arm11, brp, ARRAY_SIZE(brp));
+ CHECK_RETVAL(arm11_sc7_run(arm11, brp, ARRAY_SIZE(brp)));
LOG_DEBUG("Add BP %d at %08" PRIx32, brp_num,
bp->address);
brp_num++;
}
- arm11_sc7_set_vcr(arm11, arm11_vcr);
+ if (arm11->vcr)
+ CHECK_RETVAL(arm11_sc7_set_vcr(arm11, arm11->vcr));
}
- arm11_leave_debug_state(arm11, handle_breakpoints);
+ /* activate all watchpoints and breakpoints */
+ CHECK_RETVAL(arm11_leave_debug_state(arm11, true));
arm11_add_IR(arm11, ARM11_RESTART, TAP_IDLE);
i++;
}
+ target->debug_reason = DBG_REASON_NOTHALTED;
if (!debug_execution)
- {
- target->state = TARGET_RUNNING;
- target->debug_reason = DBG_REASON_NOTHALTED;
-
- CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
- }
+ target->state = TARGET_RUNNING;
else
- {
- target->state = TARGET_DEBUG_RUNNING;
- target->debug_reason = DBG_REASON_NOTHALTED;
-
- CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
- }
+ target->state = TARGET_DEBUG_RUNNING;
+ CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
return ERROR_OK;
}
brp[1].write = 1;
brp[1].address = ARM11_SC7_BCR0;
- if (arm11_config_hardware_step)
+ if (arm11->hardware_step)
{
/* Hardware single stepping ("instruction address
* mismatch") is used if enabled. It's not quite
/* resume */
- if (arm11_config_step_irq_enable)
+ if (arm11->step_irq_enable)
/* this disable should be redundant ... */
arm11->dscr &= ~DSCR_INT_DIS;
else
}
/* clear breakpoint */
- arm11_sc7_clear_vbw(arm11);
+ CHECK_RETVAL(arm11_sc7_clear_vbw(arm11));
/* save state */
CHECK_RETVAL(arm11_debug_entry(arm11));
}
- target->debug_reason = DBG_REASON_SINGLESTEP;
+ target->debug_reason = DBG_REASON_SINGLESTEP;
CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_HALTED));
static int arm11_assert_reset(struct target *target)
{
- int retval;
struct arm11_common *arm11 = target_to_arm11(target);
- retval = arm11_check_init(arm11);
- if (retval != ERROR_OK)
- return retval;
+ /* optionally catch reset vector */
+ if (target->reset_halt && !(arm11->vcr & 1))
+ CHECK_RETVAL(arm11_sc7_set_vcr(arm11, arm11->vcr | 1));
+
+ /* Issue some kind of warm reset. */
+ if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT)) {
+ target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
+ } else if (jtag_get_reset_config() & RESET_HAS_SRST) {
+ /* REVISIT handle "pulls" cases, if there's
+ * hardware that needs them to work.
+ */
+ jtag_add_reset(0, 1);
+ } else {
+ LOG_ERROR("%s: how to reset?", target_name(target));
+ return ERROR_FAIL;
+ }
- target->state = TARGET_UNKNOWN;
+ /* registers are now invalid */
+ register_cache_invalidate(arm11->arm.core_cache);
- /* we would very much like to reset into the halted, state,
- * but resetting and halting is second best... */
- if (target->reset_halt)
- {
- CHECK_RETVAL(target_halt(target));
- }
+ target->state = TARGET_RESET;
+ return ERROR_OK;
+}
- /* srst is funny. We can not do *anything* else while it's asserted
- * and it has unkonwn side effects. Make sure no other code runs
- * meanwhile.
- *
- * Code below assumes srst:
- *
- * - Causes power-on-reset (but of what parts of the system?). Bug
- * in arm11?
- *
- * - Messes us TAP state without asserting trst.
- *
- * - There is another bug in the arm11 core. When you generate an access to
- * external logic (for example ddr controller via AHB bus) and that block
- * is not configured (perhaps it is still held in reset), that transaction
- * will never complete. This will hang arm11 core but it will also hang
- * JTAG controller. Nothing, short of srst assertion will bring it out of
- * this.
- *
- * Mysteries:
- *
- * - What should the PC be after an srst reset when starting in the halted
- * state?
- */
+/*
+ * - There is another bug in the arm11 core. (iMX31 specific again?)
+ * When you generate an access to external logic (for example DDR
+ * controller via AHB bus) and that block is not configured (perhaps
+ * it is still held in reset), that transaction will never complete.
+ * This will hang arm11 core but it will also hang JTAG controller.
+ * Nothing short of srst assertion will bring it out of this.
+ */
- jtag_add_reset(0, 1);
- jtag_add_reset(0, 0);
+static int arm11_deassert_reset(struct target *target)
+{
+ struct arm11_common *arm11 = target_to_arm11(target);
+ int retval;
- /* How long do we have to wait? */
- jtag_add_sleep(5000);
+ /* be certain SRST is off */
+ jtag_add_reset(0, 0);
- /* un-mess up TAP state */
+ /* WORKAROUND i.MX31 problems: SRST goofs the TAP, and resets
+ * at least DSCR. OMAP24xx doesn't show that problem, though
+ * SRST-only reset seems to be problematic for other reasons.
+ * (Secure boot sequences being one likelihood!)
+ */
jtag_add_tlr();
- retval = jtag_execute_queue();
- if (retval != ERROR_OK)
- {
- return retval;
+ CHECK_RETVAL(arm11_poll(target));
+
+ if (target->reset_halt) {
+ if (target->state != TARGET_HALTED) {
+ LOG_WARNING("%s: ran after reset and before halt ...",
+ target_name(target));
+ if ((retval = target_halt(target)) != ERROR_OK)
+ return retval;
+ }
}
- return ERROR_OK;
-}
+ /* maybe restore vector catch config */
+ if (target->reset_halt && !(arm11->vcr & 1))
+ CHECK_RETVAL(arm11_sc7_set_vcr(arm11, arm11->vcr));
-static int arm11_deassert_reset(struct target *target)
-{
return ERROR_OK;
}
{
/* ldrb r1, [r0], #1 */
/* ldrb r1, [r0] */
- arm11_run_instr_no_data1(arm11,
- !arm11_config_memrw_no_increment ? 0xe4d01001 : 0xe5d01000);
+ CHECK_RETVAL(arm11_run_instr_no_data1(arm11,
+ !arm11_config_memrw_no_increment ? 0xe4d01001 : 0xe5d01000));
uint32_t res;
/* MCR p14,0,R1,c0,c5,0 */
- arm11_run_instr_data_from_core(arm11, 0xEE001E15, &res, 1);
+ CHECK_RETVAL(arm11_run_instr_data_from_core(arm11, 0xEE001E15, &res, 1));
*buffer++ = res;
}
for (size_t i = 0; i < count; i++)
{
/* ldrh r1, [r0], #2 */
- arm11_run_instr_no_data1(arm11,
- !arm11_config_memrw_no_increment ? 0xe0d010b2 : 0xe1d010b0);
+ CHECK_RETVAL(arm11_run_instr_no_data1(arm11,
+ !arm11_config_memrw_no_increment ? 0xe0d010b2 : 0xe1d010b0));
uint32_t res;
/* MCR p14,0,R1,c0,c5,0 */
- arm11_run_instr_data_from_core(arm11, 0xEE001E15, &res, 1);
+ CHECK_RETVAL(arm11_run_instr_data_from_core(arm11, 0xEE001E15, &res, 1));
uint16_t svalue = res;
memcpy(buffer + i * sizeof(uint16_t), &svalue, sizeof(uint16_t));
{
uint32_t instr = !arm11_config_memrw_no_increment ? 0xecb05e01 : 0xed905e00;
/** \todo TODO: buffer cast to uint32_t* causes alignment warnings */
- uint32_t *words = (uint32_t *)buffer;
+ uint32_t *words = (uint32_t *)(void *)buffer;
/* LDC p14,c5,[R0],#4 */
/* LDC p14,c5,[R0] */
- arm11_run_instr_data_from_core(arm11, instr, words, count);
+ CHECK_RETVAL(arm11_run_instr_data_from_core(arm11, instr, words, count));
break;
}
}
*/
static int arm11_write_memory_inner(struct target *target,
uint32_t address, uint32_t size,
- uint32_t count, uint8_t *buffer,
+ uint32_t count, const uint8_t *buffer,
bool no_increment)
{
int retval;
if (retval != ERROR_OK)
return retval;
+ /* load r0 with buffer address */
/* MRC p14,0,r0,c0,c5,0 */
retval = arm11_run_instr_data_to_core1(arm11, 0xee100e15, address);
if (retval != ERROR_OK)
* now exercise both burst and non-burst code paths with the
* default settings, increasing code coverage.
*/
- bool burst = arm11_config_memwrite_burst && (count > 1);
+ bool burst = arm11->memwrite_burst && (count > 1);
switch (size)
{
for (size_t i = 0; i < count; i++)
{
+ /* load r1 from DCC with byte data */
/* MRC p14,0,r1,c0,c5,0 */
retval = arm11_run_instr_data_to_core1(arm11, 0xee101e15, *buffer++);
if (retval != ERROR_OK)
return retval;
+ /* write r1 to memory */
/* strb r1, [r0], #1 */
/* strb r1, [r0] */
retval = arm11_run_instr_no_data1(arm11,
uint16_t value;
memcpy(&value, buffer + i * sizeof(uint16_t), sizeof(uint16_t));
+ /* load r1 from DCC with halfword data */
/* MRC p14,0,r1,c0,c5,0 */
retval = arm11_run_instr_data_to_core1(arm11, 0xee101e15, value);
if (retval != ERROR_OK)
return retval;
+ /* write r1 to memory */
/* strh r1, [r0], #2 */
/* strh r1, [r0] */
retval = arm11_run_instr_no_data1(arm11,
}
case 4: {
+ /* stream word data through DCC directly to memory */
+ /* increment: STC p14,c5,[R0],#4 */
+ /* no increment: STC p14,c5,[R0]*/
uint32_t instr = !no_increment ? 0xeca05e01 : 0xed805e00;
/** \todo TODO: buffer cast to uint32_t* causes alignment warnings */
- uint32_t *words = (uint32_t*)buffer;
+ uint32_t *words = (uint32_t*)(void *)buffer;
+ /* "burst" here just means trusting each instruction executes
+ * fully before we run the next one: per-word roundtrips, to
+ * check the Ready flag, are not used.
+ */
if (!burst)
- {
- /* STC p14,c5,[R0],#4 */
- /* STC p14,c5,[R0]*/
- retval = arm11_run_instr_data_to_core(arm11, instr, words, count);
- if (retval != ERROR_OK)
- return retval;
- }
+ retval = arm11_run_instr_data_to_core(arm11,
+ instr, words, count);
else
- {
- /* STC p14,c5,[R0],#4 */
- /* STC p14,c5,[R0]*/
- retval = arm11_run_instr_data_to_core_noack(arm11, instr, words, count);
- if (retval != ERROR_OK)
- return retval;
- }
+ retval = arm11_run_instr_data_to_core_noack(arm11,
+ instr, words, count);
+ if (retval != ERROR_OK)
+ return retval;
break;
}
if (burst)
LOG_ERROR("use 'arm11 memwrite burst disable' to disable fast burst mode");
- if (arm11_config_memwrite_error_fatal)
+ if (arm11->memwrite_error_fatal)
return ERROR_FAIL;
}
}
static int arm11_write_memory(struct target *target,
uint32_t address, uint32_t size,
- uint32_t count, uint8_t *buffer)
+ uint32_t count, const uint8_t *buffer)
{
/* pointer increment matters only for multi-unit writes ...
* not e.g. to a "reset the chip" controller.
/* write target memory in multiples of 4 byte, optimized for writing large quantities of data */
static int arm11_bulk_write_memory(struct target *target,
- uint32_t address, uint32_t count, uint8_t *buffer)
+ uint32_t address, uint32_t count, const uint8_t *buffer)
{
if (target->state != TARGET_HALTED)
{
if (!arm11)
return ERROR_FAIL;
- armv4_5_init_arch_info(target, &arm11->arm);
+ arm_init_arch_info(target, &arm11->arm);
arm11->jtag_info.tap = target->tap;
arm11->jtag_info.scann_size = 5;
arm11->jtag_info.scann_instr = ARM11_SCAN_N;
- /* cur_scan_chain == 0 */
+ arm11->jtag_info.cur_scan_chain = ~0; /* invalid/unknown */
arm11->jtag_info.intest_instr = ARM11_INTEST;
+ arm11->memwrite_burst = true;
+ arm11->memwrite_error_fatal = true;
+
return ERROR_OK;
}
arm11_setup_field(arm11, 32, NULL, &device_id, &idcode_field);
- arm11_add_dr_scan_vc(1, &idcode_field, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, 1, &idcode_field, TAP_DRPAUSE);
/* check DIDR */
arm11_setup_field(arm11, 32, NULL, &didr, chain0_fields + 0);
arm11_setup_field(arm11, 8, NULL, &implementor, chain0_fields + 1);
- arm11_add_dr_scan_vc(ARRAY_SIZE(chain0_fields), chain0_fields, TAP_IDLE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(chain0_fields), chain0_fields, TAP_IDLE);
CHECK_RETVAL(jtag_execute_queue());
- switch (device_id & 0x0FFFF000)
+ /* assume the manufacturer id is ok; check the part # */
+ switch ((device_id >> 12) & 0xFFFF)
{
- case 0x07B36000:
+ case 0x7B36:
type = "ARM1136";
break;
- case 0x07B56000:
+ case 0x7B37:
+ type = "ARM11 MPCore";
+ break;
+ case 0x7B56:
type = "ARM1156";
break;
- case 0x07B76000:
+ case 0x7B76:
arm11->arm.core_type = ARM_MODE_MON;
+ /* NOTE: could default arm11->hardware_step to true */
type = "ARM1176";
break;
default:
- LOG_ERROR("'target arm11' expects IDCODE 0x*7B*7****");
+ LOG_ERROR("unexpected ARM11 ID code");
return ERROR_FAIL;
}
LOG_INFO("found %s", type);
}
arm11->brp = ((didr >> 24) & 0x0F) + 1;
- arm11->wrp = ((didr >> 28) & 0x0F) + 1;
/** \todo TODO: reserve one brp slot if we allow breakpoints during step */
arm11->free_brps = arm11->brp;
* want to know if this core supports Secure Monitor mode.
*/
if (!target_was_examined(target))
- retval = arm11_dpm_init(arm11, didr);
+ CHECK_RETVAL(arm11_dpm_init(arm11, didr));
/* ETM on ARM11 still uses original scanchain 6 access mode */
if (arm11->arm.etm && !target_was_examined(target)) {
*register_get_last_cache_p(&target->reg_cache) =
etm_build_reg_cache(target, &arm11->jtag_info,
arm11->arm.etm);
- retval = etm_setup(target);
+ CHECK_RETVAL(etm_setup(target));
}
target_set_examined(target);
}
-/* FIXME all these BOOL_WRAPPER things should be modifying
- * per-instance state, not shared state; ditto the vector
- * catch register support. Scan chains with multiple cores
- * should be able to say "work with this core like this,
- * that core like that". Example, ARM11 MPCore ...
- */
-
#define ARM11_BOOL_WRAPPER(name, print_name) \
- COMMAND_HANDLER(arm11_handle_bool_##name) \
- { \
- return CALL_COMMAND_HANDLER(handle_command_parse_bool, \
- &arm11_config_##name, print_name); \
- }
+ COMMAND_HANDLER(arm11_handle_bool_##name) \
+ { \
+ struct target *target = get_current_target(CMD_CTX); \
+ struct arm11_common *arm11 = target_to_arm11(target); \
+ \
+ return CALL_COMMAND_HANDLER(handle_command_parse_bool, \
+ &arm11->name, print_name); \
+ }
ARM11_BOOL_WRAPPER(memwrite_burst, "memory write burst mode")
ARM11_BOOL_WRAPPER(memwrite_error_fatal, "fatal error mode for memory writes")
ARM11_BOOL_WRAPPER(step_irq_enable, "IRQs while stepping")
ARM11_BOOL_WRAPPER(hardware_step, "hardware single step")
+/* REVISIT handle the VCR bits like other ARMs: use symbols for
+ * input and output values.
+ */
+
COMMAND_HANDLER(arm11_handle_vcr)
{
+ struct target *target = get_current_target(CMD_CTX);
+ struct arm11_common *arm11 = target_to_arm11(target);
+
switch (CMD_ARGC) {
case 0:
break;
case 1:
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], arm11_vcr);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], arm11->vcr);
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- LOG_INFO("VCR 0x%08" PRIx32 "", arm11_vcr);
+ LOG_INFO("VCR 0x%08" PRIx32 "", arm11->vcr);
return ERROR_OK;
}
static const struct command_registration arm11_mw_command_handlers[] = {
{
.name = "burst",
- .handler = &arm11_handle_bool_memwrite_burst,
+ .handler = arm11_handle_bool_memwrite_burst,
.mode = COMMAND_ANY,
- .help = "Enable/Disable non-standard but fast burst mode"
- " (default: enabled)",
+ .help = "Display or modify flag controlling potentially "
+ "risky fast burst mode (default: enabled)",
+ .usage = "['enable'|'disable']",
},
{
.name = "error_fatal",
- .handler = &arm11_handle_bool_memwrite_error_fatal,
+ .handler = arm11_handle_bool_memwrite_error_fatal,
.mode = COMMAND_ANY,
- .help = "Terminate program if transfer error was found"
+ .help = "Display or modify flag controlling transfer "
+ "termination on transfer errors"
" (default: enabled)",
+ .usage = "['enable'|'disable']",
},
COMMAND_REGISTRATION_DONE
};
* simulate + breakpoint implementation is broken.
* TEMPORARY! NOT DOCUMENTED! */
.name = "hardware_step",
- .handler = &arm11_handle_bool_hardware_step,
+ .handler = arm11_handle_bool_hardware_step,
.mode = COMMAND_ANY,
.help = "DEBUG ONLY - Hardware single stepping"
" (default: disabled)",
- .usage = "(enable|disable)",
+ .usage = "['enable'|'disable']",
},
{
.name = "memwrite",
},
{
.name = "step_irq_enable",
- .handler = &arm11_handle_bool_step_irq_enable,
+ .handler = arm11_handle_bool_step_irq_enable,
.mode = COMMAND_ANY,
- .help = "Enable interrupts while stepping"
- " (default: disabled)",
+ .help = "Display or modify flag controlling interrupt "
+ "enable while stepping (default: disabled)",
+ .usage = "['enable'|'disable']",
},
{
.name = "vcr",
- .handler = &arm11_handle_vcr,
+ .handler = arm11_handle_vcr,
.mode = COMMAND_ANY,
- .help = "Control (Interrupt) Vector Catch Register",
+ .help = "Display or modify Vector Catch Register",
+ .usage = "[value]",
},
COMMAND_REGISTRATION_DONE
};
+
static const struct command_registration arm11_command_handlers[] = {
{
.chain = arm_command_handlers,
.deassert_reset = arm11_deassert_reset,
.soft_reset_halt = arm11_soft_reset_halt,
- .get_gdb_reg_list = armv4_5_get_gdb_reg_list,
+ .get_gdb_reg_list = arm_get_gdb_reg_list,
.read_memory = arm11_read_memory,
.write_memory = arm11_write_memory,
Code Review / openocd.git / blobdiff