/***************************************************************************
- * Copyright (C) 2007-2008 by Øyvind Harboe *
+ * Copyright (C) 2007-2008 by Øyvind Harboe *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
#include "embeddedice.h"
#include "minidriver.h"
#include "interface.h"
+#include "zy1000_version.h"
#include <cyg/hal/hal_io.h> // low level i/o
#include <cyg/hal/hal_diag.h>
-
-#define ZYLIN_VERSION "1.52"
+#define ZYLIN_VERSION GIT_ZY1000_VERSION
#define ZYLIN_DATE __DATE__
#define ZYLIN_TIME __TIME__
-#define ZYLIN_OPENOCD "$Revision$"
-#define ZYLIN_OPENOCD_VERSION "Zylin JTAG ZY1000 " ZYLIN_VERSION " " ZYLIN_DATE " " ZYLIN_TIME
-const char *zylin_config_dir="/config/settings";
+#define ZYLIN_OPENOCD GIT_OPENOCD_VERSION
+#define ZYLIN_OPENOCD_VERSION "ZY1000 " ZYLIN_VERSION " " ZYLIN_DATE
/* low level command set
*/
-int zy1000_read(void);
-static void zy1000_write(int tck, int tms, int tdi);
void zy1000_reset(int trst, int srst);
int zy1000_speed(int speed);
-int zy1000_register_commands(struct command_context_s *cmd_ctx);
+int zy1000_register_commands(struct command_context *cmd_ctx);
int zy1000_init(void);
int zy1000_quit(void);
/* interface commands */
-int zy1000_handle_zy1000_port_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int zy1000_handle_zy1000_port_command(struct command_context *cmd_ctx, char *cmd, char **args, int argc);
static int zy1000_khz(int khz, int *jtag_speed)
{
- if (khz==0)
+ if (khz == 0)
{
- *jtag_speed=0;
+ *jtag_speed = 0;
}
else
{
- *jtag_speed=64000/khz;
+ *jtag_speed = 64000/khz;
}
return ERROR_OK;
}
static int zy1000_speed_div(int speed, int *khz)
{
- if (speed==0)
+ if (speed == 0)
{
*khz = 0;
}
else
{
- *khz=64000/speed;
+ *khz = 64000/speed;
}
return ERROR_OK;
{
cyg_uint32 state;
// sample and clear power dropout
- HAL_WRITE_UINT32(ZY1000_JTAG_BASE+0x10, 0x80);
- HAL_READ_UINT32(ZY1000_JTAG_BASE+0x10, state);
+ HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x10, 0x80);
+ HAL_READ_UINT32(ZY1000_JTAG_BASE + 0x10, state);
bool powerDropout;
powerDropout = (state & 0x80) != 0;
return powerDropout;
{
cyg_uint32 state;
// sample and clear SRST sensing
- HAL_WRITE_UINT32(ZY1000_JTAG_BASE+0x10, 0x00000040);
- HAL_READ_UINT32(ZY1000_JTAG_BASE+0x10, state);
+ HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x10, 0x00000040);
+ HAL_READ_UINT32(ZY1000_JTAG_BASE + 0x10, state);
bool srstAsserted;
srstAsserted = (state & 0x40) != 0;
return srstAsserted;
static int zy1000_srst_asserted(int *srst_asserted)
{
- *srst_asserted=readSRST();
+ *srst_asserted = readSRST();
return ERROR_OK;
}
static int zy1000_power_dropout(int *dropout)
{
- *dropout=readPowerDropout();
+ *dropout = readPowerDropout();
return ERROR_OK;
}
-jtag_interface_t zy1000_interface =
+struct jtag_interface zy1000_interface =
{
.name = "ZY1000",
.execute_queue = NULL,
.srst_asserted = zy1000_srst_asserted,
};
-static void zy1000_write(int tck, int tms, int tdi)
-{
-
-}
-
-int zy1000_read(void)
-{
- return -1;
-}
-
-extern bool readSRST(void);
-
void zy1000_reset(int trst, int srst)
{
LOG_DEBUG("zy1000 trst=%d, srst=%d", trst, srst);
- if(!srst)
+ if (!srst)
{
- ZY1000_POKE(ZY1000_JTAG_BASE+0x14, 0x00000001);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x00000001);
}
else
{
- /* Danger!!! if clk!=0 when in
+ /* Danger!!! if clk != 0 when in
* idle in TAP_IDLE, reset halt on str912 will fail.
*/
- ZY1000_POKE(ZY1000_JTAG_BASE+0x10, 0x00000001);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x00000001);
}
- if(!trst)
+ if (!trst)
{
- ZY1000_POKE(ZY1000_JTAG_BASE+0x14, 0x00000002);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x00000002);
}
else
{
/* assert reset */
- ZY1000_POKE(ZY1000_JTAG_BASE+0x10, 0x00000002);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x00000002);
}
- if (trst||(srst&&(jtag_get_reset_config() & RESET_SRST_PULLS_TRST)))
+ if (trst||(srst && (jtag_get_reset_config() & RESET_SRST_PULLS_TRST)))
{
waitIdle();
/* we're now in the RESET state until trst is deasserted */
- ZY1000_POKE(ZY1000_JTAG_BASE+0x20, TAP_RESET);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x20, TAP_RESET);
} else
{
/* We'll get RCLK failure when we assert TRST, so clear any false positives here */
- ZY1000_POKE(ZY1000_JTAG_BASE+0x14, 0x400);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x400);
}
/* wait for srst to float back up */
if (!srst)
{
int i;
- for (i=0; i<1000; i++)
+ for (i = 0; i < 1000; i++)
{
// We don't want to sense our own reset, so we clear here.
// There is of course a timing hole where we could loose
alive_sleep(1);
}
- if (i==1000)
+ if (i == 1000)
{
LOG_USER("SRST didn't deassert after %dms", i);
- } else if (i>1)
+ } else if (i > 1)
{
LOG_USER("SRST took %dms to deassert", i);
}
int zy1000_speed(int speed)
{
- if(speed == 0)
+ if (speed == 0)
{
/*0 means RCLK*/
speed = 0;
- ZY1000_POKE(ZY1000_JTAG_BASE+0x10, 0x100);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x100);
LOG_DEBUG("jtag_speed using RCLK");
}
else
{
- if(speed > 8190 || speed < 2)
+ if (speed > 8190 || speed < 2)
{
LOG_USER("valid ZY1000 jtag_speed=[8190,2]. Divisor is 64MHz / even values between 8190-2, i.e. min 7814Hz, max 32MHz");
return ERROR_INVALID_ARGUMENTS;
}
LOG_USER("jtag_speed %d => JTAG clk=%f", speed, 64.0/(float)speed);
- ZY1000_POKE(ZY1000_JTAG_BASE+0x14, 0x100);
- ZY1000_POKE(ZY1000_JTAG_BASE+0x1c, speed&~1);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x100);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x1c, speed&~1);
}
return ERROR_OK;
}
savePower = power;
if (power)
{
- HAL_WRITE_UINT32(ZY1000_JTAG_BASE+0x14, 0x8);
+ HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x14, 0x8);
} else
{
- HAL_WRITE_UINT32(ZY1000_JTAG_BASE+0x10, 0x8);
+ HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x10, 0x8);
}
}
-int handle_power_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+int handle_power_command(struct command_context *cmd_ctx, char *cmd, char **args, int argc)
{
if (argc > 1)
{
if ((argc < 1) || (argc > 2))
return JIM_ERR;
char buff[128];
- const char *version_str=NULL;
+ const char *version_str = NULL;
if (argc == 1)
{
- version_str=ZYLIN_OPENOCD_VERSION;
+ version_str = ZYLIN_OPENOCD_VERSION;
} else
{
const char *str = Jim_GetString(argv[1], NULL);
if (strcmp("openocd", str) == 0)
{
- int revision;
- revision = atol(ZYLIN_OPENOCD+strlen("XRevision: "));
- sprintf(buff, "%d", revision);
- version_str=buff;
+ version_str = ZYLIN_OPENOCD;
}
else if (strcmp("zy1000", str) == 0)
{
- version_str=ZYLIN_VERSION;
+ version_str = ZYLIN_VERSION;
}
else if (strcmp("date", str) == 0)
{
- version_str=ZYLIN_DATE;
+ version_str = ZYLIN_DATE;
+ }
+ else if (strcmp("time", str) == 0)
+ {
+ version_str = ZYLIN_TIME;
+ }
+ else if (strcmp("pcb", str) == 0)
+ {
+#ifdef CYGPKG_HAL_NIOS2
+ version_str="c";
+#else
+ version_str="b";
+#endif
}
else
{
}
+#ifdef CYGPKG_HAL_NIOS2
+static int jim_zy1000_writefirmware(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
+{
+ if (argc != 2)
+ return JIM_ERR;
+
+ int length;
+ int stat;
+ const char *str = Jim_GetString(argv[1], &length);
+
+ /* BUG!!!! skip header! */
+ void *firmware_address=0x4000000;
+ int firmware_length=0x100000;
+
+ if (length>firmware_length)
+ return JIM_ERR;
+
+ void *err_addr;
+
+ if ((stat = flash_erase((void *)firmware_address, firmware_length, (void **)&err_addr)) != 0)
+ {
+ return JIM_ERR;
+ }
+
+ if ((stat = flash_program(firmware_address, str, length, (void **)&err_addr)) != 0)
+ return JIM_ERR;
+
+ return JIM_OK;
+}
+#endif
+
static int
zylinjtag_Jim_Command_powerstatus(Jim_Interp *interp,
int argc,
}
cyg_uint32 status;
- ZY1000_PEEK(ZY1000_JTAG_BASE+0x10, status);
+ ZY1000_PEEK(ZY1000_JTAG_BASE + 0x10, status);
- Jim_SetResult(interp, Jim_NewIntObj(interp, (status&0x80)!=0));
+ Jim_SetResult(interp, Jim_NewIntObj(interp, (status&0x80) != 0));
return JIM_OK;
}
-int zy1000_register_commands(struct command_context_s *cmd_ctx)
+int zy1000_register_commands(struct command_context *cmd_ctx)
{
register_command(cmd_ctx, NULL, "power", handle_power_command, COMMAND_ANY,
"power <on/off> - turn power switch to target on/off. No arguments - print status.");
Jim_CreateCommand(interp, "powerstatus", zylinjtag_Jim_Command_powerstatus, NULL, NULL);
+#ifdef CYGPKG_HAL_NIOS2
+ Jim_CreateCommand(interp, "updatezy1000firmware", jim_zy1000_writefirmware, NULL, NULL);
+#endif
+
+
return ERROR_OK;
}
{
LOG_USER("%s", ZYLIN_OPENOCD_VERSION);
- ZY1000_POKE(ZY1000_JTAG_BASE+0x10, 0x30); // Turn on LED1 & LED2
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x30); // Turn on LED1 & LED2
setPower(true); // on by default
cyg_uint32 empty;
waitIdle();
- ZY1000_PEEK(ZY1000_JTAG_BASE+0x10, empty);
+ ZY1000_PEEK(ZY1000_JTAG_BASE + 0x10, empty);
/* clear JTAG error register */
- ZY1000_POKE(ZY1000_JTAG_BASE+0x14, 0x400);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x400);
- if ((empty&0x400)!=0)
+ if ((empty&0x400) != 0)
{
LOG_WARNING("RCLK timeout");
/* the error is informative only as we don't want to break the firmware if there
{
cyg_uint32 value;
waitIdle();
- ZY1000_PEEK(ZY1000_JTAG_BASE+0xc, value);
+ ZY1000_PEEK(ZY1000_JTAG_BASE + 0xc, value);
VERBOSE(LOG_INFO("getShiftValue %08x", value));
return value;
}
{
cyg_uint32 value;
waitIdle();
- ZY1000_PEEK(ZY1000_JTAG_BASE+0x18, value);
+ ZY1000_PEEK(ZY1000_JTAG_BASE + 0x18, value);
VERBOSE(LOG_INFO("getShiftValue %08x (flipped)", value));
return value;
}
{
VERBOSE(LOG_INFO("shiftValueInner %s %s %d %08x (flipped)", tap_state_name(state), tap_state_name(endState), repeat, value));
cyg_uint32 a,b;
- a=state;
- b=endState;
- ZY1000_POKE(ZY1000_JTAG_BASE+0xc, value);
- ZY1000_POKE(ZY1000_JTAG_BASE+0x8, (1<<15)|(repeat<<8)|(a<<4)|b);
+ a = state;
+ b = endState;
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0xc, value);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x8, (1 << 15) | (repeat << 8) | (a << 4) | b);
VERBOSE(getShiftValueFlip());
}
#endif
-extern int jtag_check_value(u8 *captured, void *priv);
+extern int jtag_check_value(uint8_t *captured, void *priv);
-static __inline void scanFields(int num_fields, scan_field_t *fields, tap_state_t shiftState, tap_state_t end_state)
+static void gotoEndState(tap_state_t end_state)
+{
+ setCurrentState(end_state);
+}
+
+static __inline void scanFields(int num_fields, const struct scan_field *fields, tap_state_t shiftState, int pause)
{
int i;
int j;
{
cyg_uint32 value;
- static u8 *in_buff=NULL; /* pointer to buffer for scanned data */
- static int in_buff_size=0;
- u8 *inBuffer=NULL;
+ uint8_t *inBuffer = NULL;
// figure out where to store the input data
- int num_bits=fields[i].num_bits;
- if (fields[i].in_value!=NULL)
+ int num_bits = fields[i].num_bits;
+ if (fields[i].in_value != NULL)
{
- inBuffer=fields[i].in_value;
+ inBuffer = fields[i].in_value;
}
// here we shuffle N bits out/in
- j=0;
- while (j<num_bits)
+ j = 0;
+ while (j < num_bits)
{
tap_state_t pause_state;
int l;
- k=num_bits-j;
- pause_state=(shiftState==TAP_DRSHIFT)?TAP_DRSHIFT:TAP_IRSHIFT;
- if (k>32)
+ k = num_bits-j;
+ pause_state = (shiftState == TAP_DRSHIFT)?TAP_DRSHIFT:TAP_IRSHIFT;
+ if (k > 32)
{
- k=32;
+ k = 32;
/* we have more to shift out */
- } else if (i == num_fields-1)
+ } else if (pause&&(i == num_fields-1))
{
/* this was the last to shift out this time */
- pause_state=end_state;
+ pause_state = (shiftState==TAP_DRSHIFT)?TAP_DRPAUSE:TAP_IRPAUSE;
}
- // we have (num_bits+7)/8 bytes of bits to toggle out.
+ // we have (num_bits + 7)/8 bytes of bits to toggle out.
// bits are pushed out LSB to MSB
- value=0;
- if (fields[i].out_value!=NULL)
+ value = 0;
+ if (fields[i].out_value != NULL)
{
- for (l=0; l<k; l+=8)
+ for (l = 0; l < k; l += 8)
{
- value|=fields[i].out_value[(j+l)/8]<<l;
+ value|=fields[i].out_value[(j + l)/8]<<l;
}
}
/* mask away unused bits for easier debugging */
- value&=~(((u32)0xffffffff)<<k);
+ value&=~(((uint32_t)0xffffffff) << k);
shiftValueInner(shiftState, pause_state, k, value);
- if (inBuffer!=NULL)
+ if (inBuffer != NULL)
{
// data in, LSB to MSB
- value=getShiftValue();
+ value = getShiftValue();
// we're shifting in data to MSB, shift data to be aligned for returning the value
value >>= 32-k;
- for (l=0; l<k; l+=8)
+ for (l = 0; l < k; l += 8)
{
- inBuffer[(j+l)/8]=(value>>l)&0xff;
+ inBuffer[(j + l)/8]=(value >> l)&0xff;
}
}
- j+=k;
+ j += k;
}
}
}
-int interface_jtag_set_end_state(tap_state_t state)
-{
- return ERROR_OK;
-}
-
-
-int interface_jtag_add_ir_scan(int num_fields, const scan_field_t *fields, tap_state_t state)
+int interface_jtag_add_ir_scan(int num_fields, const struct scan_field *fields, tap_state_t state)
{
int j;
int scan_size = 0;
- jtag_tap_t *tap, *nextTap;
- for(tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap=nextTap)
+ struct jtag_tap *tap, *nextTap;
+ for (tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap = nextTap)
{
- nextTap=jtag_tap_next_enabled(tap);
- tap_state_t end_state;
- if (nextTap==NULL)
- {
- end_state = state;
- } else
- {
- end_state = TAP_IRSHIFT;
- }
+ nextTap = jtag_tap_next_enabled(tap);
+ int pause = (nextTap==NULL);
int found = 0;
scan_size = tap->ir_length;
/* search the list */
- for (j=0; j < num_fields; j++)
+ for (j = 0; j < num_fields; j++)
{
if (tap == fields[j].tap)
{
found = 1;
- scanFields(1, fields+j, TAP_IRSHIFT, end_state);
+ scanFields(1, fields + j, TAP_IRSHIFT, pause);
/* update device information */
buf_cpy(fields[j].out_value, tap->cur_instr, scan_size);
if (!found)
{
/* if a device isn't listed, set it to BYPASS */
- u8 ones[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff};
+ uint8_t ones[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff};
- scan_field_t tmp;
+ struct scan_field tmp;
memset(&tmp, 0, sizeof(tmp));
tmp.out_value = ones;
tmp.num_bits = scan_size;
- scanFields(1, &tmp, TAP_IRSHIFT, end_state);
+ scanFields(1, &tmp, TAP_IRSHIFT, pause);
/* update device information */
buf_cpy(tmp.out_value, tap->cur_instr, scan_size);
tap->bypass = 1;
}
}
+ gotoEndState(state);
return ERROR_OK;
}
-int interface_jtag_add_plain_ir_scan(int num_fields, const scan_field_t *fields, tap_state_t state)
+int interface_jtag_add_plain_ir_scan(int num_fields, const struct scan_field *fields, tap_state_t state)
{
- scanFields(num_fields, fields, TAP_IRSHIFT, state);
+ scanFields(num_fields, fields, TAP_IRSHIFT, 1);
+ gotoEndState(state);
return ERROR_OK;
}
/*extern jtag_command_t **jtag_get_last_command_p(void);*/
-int interface_jtag_add_dr_scan(int num_fields, const scan_field_t *fields, tap_state_t state)
+int interface_jtag_add_dr_scan(int num_fields, const struct scan_field *fields, tap_state_t state)
{
int j;
- jtag_tap_t *tap, *nextTap;
- for(tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap=nextTap)
+ struct jtag_tap *tap, *nextTap;
+ for (tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap = nextTap)
{
- nextTap=jtag_tap_next_enabled(tap);
- int found=0;
- tap_state_t end_state;
- if (nextTap==NULL)
- {
- end_state = state;
- } else
- {
- end_state = TAP_DRSHIFT;
- }
+ nextTap = jtag_tap_next_enabled(tap);
+ int found = 0;
+ int pause = (nextTap==NULL);
- for (j=0; j < num_fields; j++)
+ for (j = 0; j < num_fields; j++)
{
if (tap == fields[j].tap)
{
found = 1;
- scanFields(1, fields+j, TAP_DRSHIFT, end_state);
+ scanFields(1, fields+j, TAP_DRSHIFT, pause);
}
}
if (!found)
{
- scan_field_t tmp;
+ struct scan_field tmp;
/* program the scan field to 1 bit length, and ignore it's value */
tmp.num_bits = 1;
tmp.out_value = NULL;
tmp.in_value = NULL;
- scanFields(1, &tmp, TAP_DRSHIFT, end_state);
+ scanFields(1, &tmp, TAP_DRSHIFT, pause);
}
else
{
}
}
+ gotoEndState(state);
return ERROR_OK;
}
-int interface_jtag_add_plain_dr_scan(int num_fields, const scan_field_t *fields, tap_state_t state)
+int interface_jtag_add_plain_dr_scan(int num_fields, const struct scan_field *fields, tap_state_t state)
{
- scanFields(num_fields, fields, TAP_DRSHIFT, state);
+ scanFields(num_fields, fields, TAP_DRSHIFT, 1);
+ gotoEndState(state);
return ERROR_OK;
}
-extern int jtag_nsrst_delay;
-extern int jtag_ntrst_delay;
-
int interface_jtag_add_reset(int req_trst, int req_srst)
{
zy1000_reset(req_trst, req_srst);
/* execute num_cycles, 32 at the time. */
int i;
- for (i=0; i<num_cycles; i+=32)
+ for (i = 0; i < num_cycles; i += 32)
{
int num;
- num=32;
- if (num_cycles-i<num)
+ num = 32;
+ if (num_cycles-i < num)
{
- num=num_cycles-i;
+ num = num_cycles-i;
}
shiftValueInner(clockstate, clockstate, num, 0);
}
/* finish in end_state */
setCurrentState(state);
#else
- tap_state_t t=TAP_IDLE;
+ tap_state_t t = TAP_IDLE;
/* test manual drive code on any target */
int tms;
- u8 tms_scan = tap_get_tms_path(t, state);
+ uint8_t tms_scan = tap_get_tms_path(t, state);
int tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
for (i = 0; i < tms_count; i++)
{
tms = (tms_scan >> i) & 1;
waitIdle();
- ZY1000_POKE(ZY1000_JTAG_BASE+0x28, tms);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x28, tms);
}
waitIdle();
- ZY1000_POKE(ZY1000_JTAG_BASE+0x20, state);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x20, state);
#endif
return zy1000_jtag_add_clocks(num_cycles, cmd_queue_cur_state, cmd_queue_cur_state);
}
-int interface_jtag_add_sleep(u32 us)
+int interface_jtag_add_sleep(uint32_t us)
{
jtag_sleep(us);
return ERROR_OK;
state_count = 0;
- tap_state_t cur_state=cmd_queue_cur_state;
+ tap_state_t cur_state = cmd_queue_cur_state;
while (num_states)
{
}
waitIdle();
- ZY1000_POKE(ZY1000_JTAG_BASE+0x28, tms);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x28, tms);
cur_state = path[state_count];
state_count++;
}
waitIdle();
- ZY1000_POKE(ZY1000_JTAG_BASE+0x20, cur_state);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x20, cur_state);
return ERROR_OK;
}
-void embeddedice_write_dcc(jtag_tap_t *tap, int reg_addr, u8 *buffer, int little, int count)
+void embeddedice_write_dcc(struct jtag_tap *tap, int reg_addr, uint8_t *buffer, int little, int count)
{
-// static int const reg_addr=0x5;
- tap_state_t end_state=jtag_get_end_state();
- if (jtag_tap_next_enabled(jtag_tap_next_enabled(NULL))==NULL)
+// static int const reg_addr = 0x5;
+ tap_state_t end_state = jtag_get_end_state();
+ if (jtag_tap_next_enabled(jtag_tap_next_enabled(NULL)) == NULL)
{
/* better performance via code duplication */
if (little)
for (i = 0; i < count; i++)
{
shiftValueInner(TAP_DRSHIFT, TAP_DRSHIFT, 32, fast_target_buffer_get_u32(buffer, 1));
- shiftValueInner(TAP_DRSHIFT, end_state, 6, reg_addr|(1<<5));
- buffer+=4;
+ shiftValueInner(TAP_DRSHIFT, end_state, 6, reg_addr | (1 << 5));
+ buffer += 4;
}
} else
{
for (i = 0; i < count; i++)
{
shiftValueInner(TAP_DRSHIFT, TAP_DRSHIFT, 32, fast_target_buffer_get_u32(buffer, 0));
- shiftValueInner(TAP_DRSHIFT, end_state, 6, reg_addr|(1<<5));
- buffer+=4;
+ shiftValueInner(TAP_DRSHIFT, end_state, 6, reg_addr | (1 << 5));
+ buffer += 4;
}
}
}
}
}
-int loadFile(const char *fileName, void **data, int *len);
-
-/* boolean parameter stored on config */
-int boolParam(char *var)
-{
- bool result = false;
- char *name = alloc_printf("%s/%s", zylin_config_dir, var);
- if (name == NULL)
- return result;
-
- void *data;
- int len;
- if (loadFile(name, &data, &len) == ERROR_OK)
- {
- if (len > 1)
- len = 1;
- result = strncmp((char *) data, "1", len) == 0;
- free(data);
- }
- free(name);
- return result;
-}
-
Code Review / openocd.git / blobdiff