#include "command.h"
-#if 0
-#define _DEBUG_JTAG_IO_
+#ifdef _DEBUG_JTAG_IO_
+#define DEBUG_JTAG_IO(expr ...) LOG_DEBUG(expr)
+#else
+#define DEBUG_JTAG_IO(expr ...)
#endif
#ifndef DEBUG_JTAG_IOZ
#define DEBUG_JTAG_IOZ 64
#endif
+/*-----<Macros>--------------------------------------------------*/
+
+/** When given an array, compute its DIMension, i.e. number of elements in the array */
+#define DIM(x) (sizeof(x)/sizeof((x)[0]))
+
+/** Calculate the number of bytes required to hold @a n TAP scan bits */
+#define TAP_SCAN_BYTES(n) CEIL(n, 8)
+
+/*-----</Macros>-------------------------------------------------*/
+
+
-/* 16 Tap States, from page 21 of ASSET InterTech, Inc.'s svf.pdf
+/*
+ * Tap states from ARM7TDMI-S Technical reference manual.
+ * Also, validated against several other ARM core technical manuals.
+ *
+ * N.B. tap_get_tms_path() was changed to reflect this corrected
+ * numbering and ordering of the TAP states.
+ *
+ * DANGER!!!! some interfaces care about the actual numbers used
+ * as they are handed off directly to hardware implementations.
*/
-enum tap_state {
+
+typedef enum tap_state
+{
+#if BUILD_ECOSBOARD
+/* These are the old numbers. Leave as-is for now... */
TAP_RESET = 0, TAP_IDLE = 8,
TAP_DRSELECT = 1, TAP_DRCAPTURE = 2, TAP_DRSHIFT = 3, TAP_DREXIT1 = 4,
TAP_DRPAUSE = 5, TAP_DREXIT2 = 6, TAP_DRUPDATE = 7,
TAP_IRSELECT = 9, TAP_IRCAPTURE = 10, TAP_IRSHIFT = 11, TAP_IREXIT1 = 12,
- TAP_IRPAUSE = 13, TAP_IREXIT2 = 14, TAP_IRUPDATE = 15
-};
+ TAP_IRPAUSE = 13, TAP_IREXIT2 = 14, TAP_IRUPDATE = 15,
-typedef enum tap_state tap_state_t;
-
-typedef unsigned BOOL;
-#define TRUE 1
-#define FALSE 0
+ TAP_NUM_STATES = 16, TAP_INVALID = -1,
+#else
+ /* Proper ARM recommended numbers */
+ TAP_DREXIT2 = 0x0,
+ TAP_DREXIT1 = 0x1,
+ TAP_DRSHIFT = 0x2,
+ TAP_DRPAUSE = 0x3,
+ TAP_IRSELECT = 0x4,
+ TAP_DRUPDATE = 0x5,
+ TAP_DRCAPTURE = 0x6,
+ TAP_DRSELECT = 0x7,
+ TAP_IREXIT2 = 0x8,
+ TAP_IREXIT1 = 0x9,
+ TAP_IRSHIFT = 0xa,
+ TAP_IRPAUSE = 0xb,
+ TAP_IDLE = 0xc,
+ TAP_IRUPDATE = 0xd,
+ TAP_IRCAPTURE = 0xe,
+ TAP_RESET = 0x0f,
+
+ TAP_NUM_STATES = 0x10,
+
+ TAP_INVALID = -1,
+#endif
+} tap_state_t;
typedef struct tap_transition_s
{
*/
int tap_get_tms_path(tap_state_t from, tap_state_t to);
+
+/**
+ * Function int tap_get_tms_path_len
+ * returns the total number of bits that represents a TMS path
+ * transition as given by the function tap_get_tms_path().
+ *
+ * For at least one interface (JLink) it's not OK to simply "pad" TMS sequences
+ * to fit a whole byte. (I suspect this is a general TAP problem within OOCD.)
+ * Padding TMS causes all manner of instability that's not easily
+ * discovered. Using this routine we can apply EXACTLY the state transitions
+ * required to make something work - no more - no less.
+ *
+ * @param from is the starting state
+ * @param to is the resultant or final state
+ * @return int - the total number of bits in a transition.
+ */
+int tap_get_tms_path_len(tap_state_t from, tap_state_t to);
+
+
/**
* Function tap_move_ndx
* when given a stable state, returns an index from 0-5. The index corresponds to a
/**
* Function tap_is_state_stable
- * returns TRUE if the \a astate is stable.
+ * returns true if the \a astate is stable.
*/
-BOOL tap_is_state_stable(tap_state_t astate);
+bool tap_is_state_stable(tap_state_t astate);
/**
* Function tap_state_transition
* @param tms is either zero or non-zero, just like a real TMS line in a jtag interface.
* @return tap_state_t - the next state a TAP would enter.
*/
-tap_state_t tap_state_transition(tap_state_t current_state, BOOL tms);
+tap_state_t tap_state_transition(tap_state_t current_state, bool tms);
/**
* Function tap_state_name
*/
const char* tap_state_name(tap_state_t state);
+#ifdef _DEBUG_JTAG_IO_
+/**
+ * @brief Prints verbose TAP state transitions for the given TMS/TDI buffers.
+ * @param tms_buf must points to a buffer containing the TMS bitstream.
+ * @param tdi_buf must points to a buffer containing the TDI bitstream.
+ * @param tap_len must specify the length of the TMS/TDI bitstreams.
+ * @param start_tap_state must specify the current TAP state.
+ * @returns the final TAP state; pass as @a start_tap_state in following call.
+ */
+tap_state_t jtag_debug_state_machine(const void *tms_buf, const void *tdi_buf,
+ unsigned tap_len, tap_state_t start_tap_state);
+#else
+static inline tap_state_t jtag_debug_state_machine(const void *tms_buf,
+ const void *tdi_buf, unsigned tap_len, tap_state_t start_tap_state)
+{
+ return start_tap_state;
+}
+#endif // _DEBUG_JTAG_IO_
+
/*-----</Cable Helper API>------------------------------------------*/
jtag_tap_t* tap; /* tap pointer this instruction refers to */
int num_bits; /* number of bits this field specifies (up to 32) */
u8* out_value; /* value to be scanned into the device */
- u8* out_mask; /* only masked bits care */
u8* in_value; /* pointer to a 32-bit memory location to take data scanned out */
/* in_check_value/mask, in_handler_error_handler, in_handler_priv can be used by the in handler, otherwise they contain garbage */
- u8* in_check_value; /* used to validate scan results */
- u8* in_check_mask; /* check specified bits against check_value */
- in_handler_t in_handler; /* process received buffer using this handler */
- void* in_handler_priv; /* additional information for the in_handler */
+ u8* in_check_value; /* deprecated! only used from jtag_set_check_value. used to validate scan results */
+ u8* in_check_mask; /* deprecated! only used from jtag_set_check_value. check specified bits against check_value */
+ in_handler_t in_handler; /* deprecated! SET TO NULL. DO NOT USE! process received buffer using this handler */
+ void* in_handler_priv; /* deprecated! only used by obsolete in_handler implementations */
} scan_field_t;
enum scan_type {
};
extern jtag_tap_t* jtag_AllTaps(void);
extern jtag_tap_t* jtag_TapByPosition(int n);
-extern jtag_tap_t* jtag_TapByPosition(int n);
extern jtag_tap_t* jtag_TapByString(const char* dotted_name);
extern jtag_tap_t* jtag_TapByJimObj(Jim_Interp* interp, Jim_Obj* obj);
extern jtag_tap_t* jtag_TapByAbsPosition(int abs_position);
extern void jtag_add_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
extern int interface_jtag_add_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
extern void jtag_add_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+/* same as jtag_add_dr_scan but the scan is executed immediately. sets jtag_error if there
+ * was a failure.
+ */
+extern void jtag_add_dr_scan_now(int num_fields, scan_field_t* fields, tap_state_t endstate);
extern int interface_jtag_add_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
extern void jtag_add_plain_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
extern int interface_jtag_add_plain_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
extern void jtag_add_tlr(void);
extern int interface_jtag_add_tlr(void);
-/* Do not use jtag_add_pathmove() unless you need to, but do use it
+/* Application code *must* assume that interfaces will
+ * implement transitions between states with different
+ * paths and path lengths through the state diagram. The
+ * path will vary across interface and also across versions
+ * of the same interface over time. Even if the OpenOCD code
+ * is unchanged, the actual path taken may vary over time
+ * and versions of interface firmware or PCB revisions.
+ *
+ * Use jtag_add_pathmove() when specific transition sequences
+ * are required.
+ *
+ * Do not use jtag_add_pathmove() unless you need to, but do use it
* if you have to.
*
* DANGER! If the target is dependent upon a particular sequence
*/
extern int jtag_execute_queue(void);
+/* same as jtag_execute_queue() but does not clear the error flag */
+extern void jtag_execute_queue_noclear(void);
+
+/* this flag is set when an error occurs while executing the queue. cleared
+ * by jtag_execute_queue()
+ *
+ * this flag can also be set from application code if some error happens
+ * during processing that should be reported during jtag_execute_queue().
+ */
+extern int jtag_error;
+
+static __inline__ void jtag_set_error(int error)
+{
+ if ((error==ERROR_OK)||(jtag_error!=ERROR_OK))
+ {
+ /* keep first error */
+ return;
+ }
+ jtag_error=error;
+}
+
+
+
/* can be implemented by hw+sw */
extern int interface_jtag_execute_queue(void);
extern int jtag_power_dropout(int* dropout);
extern int jtag_srst_asserted(int* srst_asserted);
/* JTAG support functions */
-extern void jtag_set_check_value(scan_field_t* field, u8* value, u8* mask, error_handler_t* in_error_handler);
+struct invalidstruct
+{
+
+};
+
+extern void jtag_set_check_value(scan_field_t* field, u8* value, u8* mask, struct invalidstruct *obsolete);
extern enum scan_type jtag_scan_type(scan_command_t* cmd);
extern int jtag_scan_size(scan_command_t* cmd);
extern int jtag_read_buffer(u8* buffer, scan_command_t* cmd);
/* jtag_add_dr_out() is a faster version of jtag_add_dr_scan()
*
- * Current or end_state can not be TAP_RESET. end_state can be -1
+ * Current or end_state can not be TAP_RESET. end_state can be TAP_INVALID
*
* num_bits[i] is the number of bits to clock out from value[i] LSB first.
*
static __inline__ void jtag_add_dr_out(jtag_tap_t* tap, int num_fields, const int* num_bits, const u32* value,
tap_state_t end_state)
{
- if (end_state != -1)
+ if (end_state != TAP_INVALID)
cmd_queue_end_state = end_state;
cmd_queue_cur_state = cmd_queue_end_state;
interface_jtag_add_dr_out(tap, num_fields, num_bits, value, cmd_queue_end_state);