extern jtag_tap_t* jtag_tap_by_string(const char* dotted_name);
extern jtag_tap_t* jtag_tap_by_jim_obj(Jim_Interp* interp, Jim_Obj* obj);
extern jtag_tap_t* jtag_tap_by_position(unsigned abs_position);
+extern jtag_tap_t* jtag_tap_next_enabled(jtag_tap_t* p);
extern unsigned jtag_tap_count_enabled(void);
extern unsigned jtag_tap_count(void);
-static __inline__ jtag_tap_t* jtag_tap_next_enabled(jtag_tap_t* p)
-{
- if (p == NULL)
- {
- /* start at the head of list */
- p = jtag_all_taps();
- }
- else
- {
- /* start *after* this one */
- p = p->next_tap;
- }
- while (p)
- {
- if (p->enabled)
- {
- break;
- }
- else
- {
- p = p->next_tap;
- }
- }
-
- return p;
-}
-
-
-enum reset_line_mode {
- LINE_OPEN_DRAIN = 0x0,
- LINE_PUSH_PULL = 0x1,
-};
/*
* There are three cases when JTAG_TRST_ASSERTED callback is invoked. The
jtag_tap_event_action_t* next;
};
-/// @returns The current state of TRST.
-int jtag_get_trst(void);
-/// @returns The current state of SRST.
-int jtag_get_srst(void);
+/**
+ * Defines the function signature requide for JTAG event callback
+ * functions, which are added with jtag_register_event_callback()
+ * and removed jtag_unregister_event_callback().
+ * @param event The event to handle.
+ * @param prive A pointer to data that was passed to
+ * jtag_register_event_callback().
+ * @returns Must return ERROR_OK on success, or an error code on failure.
+ *
+ * @todo Change to return void or define a use for its return code.
+ */
+typedef int (*jtag_event_handler_t)(enum jtag_event event, void* priv);
-typedef struct jtag_event_callback_s
-{
- int (*callback)(enum jtag_event event, void* priv);
- void* priv;
- struct jtag_event_callback_s* next;
-} jtag_event_callback_t;
+extern int jtag_register_event_callback(jtag_event_handler_t f, void *x);
+extern int jtag_unregister_event_callback(jtag_event_handler_t f);
+
+extern int jtag_call_event_callbacks(enum jtag_event event);
-extern jtag_event_callback_t* jtag_event_callbacks;
-extern int jtag_speed;
-extern int jtag_speed_post_reset;
+/// @returns The current JTAG speed setting.
+int jtag_get_speed(void);
+/**
+ * Given a @a speed setting, use the interface @c speed_div callback to
+ * adjust the setting.
+ * @param speed The speed setting to convert back to readable KHz.
+ * @returns ERROR_OK if the interface has not been initialized or on success;
+ * otherwise, the error code produced by the @c speed_div callback.
+ */
+int jtag_get_speed_readable(int *speed);
+/**
+ * Set the JTAG speed. This routine will call the underlying
+ * interface @c speed callback, if the interface has been initialized.
+ * @param speed The new speed setting.
+ * @returns ERROR_OK during configuration or on success, or an error
+ * code returned from the interface @c speed callback.
+ */
+int jtag_set_speed(int speed);
enum reset_types {
RESET_NONE = 0x0,
RESET_SRST_PUSH_PULL = 0x20,
};
-extern enum reset_types jtag_reset_config;
+enum reset_types jtag_get_reset_config(void);
+void jtag_set_reset_config(enum reset_types type);
+
+void jtag_set_nsrst_delay(unsigned delay);
+unsigned jtag_get_nsrst_delay(void);
+
+void jtag_set_ntrst_delay(unsigned delay);
+unsigned jtag_get_ntrst_delay(void);
+
+/// @returns The current state of TRST.
+int jtag_get_trst(void);
+/// @returns The current state of SRST.
+int jtag_get_srst(void);
+
+
/**
* Initialize interface upon startup. Return a successful no-op upon
*/
extern void jtag_add_pathmove(int num_states, const tap_state_t* path);
+/**
+ * jtag_add_statemove() moves from the current state to @a goal_state.
+ *
+ * @param goal_state The final TAP state.
+ * @return ERROR_OK on success, or an error code on failure.
+ *
+ * Moves from the current state to the goal \a state.
+ *
+ * This needs to be handled according to the xsvf spec, see the XSTATE
+ * command description. From the XSVF spec, pertaining to XSTATE:
+ *
+ * For special states known as stable states (Test-Logic-Reset,
+ * Run-Test/Idle, Pause-DR, Pause- IR), an XSVF interpreter follows
+ * predefined TAP state paths when the starting state is a stable state
+ * and when the XSTATE specifies a new stable state. See the STATE
+ * command in the [Ref 5] for the TAP state paths between stable
+ * states.
+ *
+ * For non-stable states, XSTATE should specify a state that is only one
+ * TAP state transition distance from the current TAP state to avoid
+ * undefined TAP state paths. A sequence of multiple XSTATE commands can
+ * be issued to transition the TAP through a specific state path.
+ *
+ * @note Unless @c tms_bits holds a path that agrees with [Ref 5] in the
+ * above spec, then this code is not fully conformant to the xsvf spec.
+ * This puts a burden on tap_get_tms_path() function from the xsvf spec.
+ * If in doubt, you should confirm that that burden is being met.
+ *
+ * Otherwise, @a goal_state must be immediately reachable in one clock
+ * cycle, and does not need to be a stable state.
+ */
+extern int jtag_add_statemove(tap_state_t goal_state);
+
/**
* Goes to TAP_IDLE (if we're not already there), cycle
* precisely num_cycles in the TAP_IDLE state, after which move
/* same as jtag_execute_queue() but does not clear the error flag */
extern void jtag_execute_queue_noclear(void);
-/**
- * The jtag_error variable is set when an error occurs while executing
- * the queue.
- *
- * This flag can also be set from application code, if an error happens
- * during processing that should be reported during jtag_execute_queue().
- *
- * It is cleared by jtag_execute_queue().
- */
-extern int jtag_error;
-
-static __inline__ void jtag_set_error(int error)
-{
- if ((error==ERROR_OK)||(jtag_error!=ERROR_OK))
- {
- /* keep first error */
- return;
- }
- jtag_error=error;
-}
-
-/**
- * Resets jtag_error to ERROR_OK, returning its previous value.
- * @returns The previous value of @c jtag_error.
- */
-static inline int jtag_error_clear(void)
-{
- int temp = jtag_error;
- jtag_error = ERROR_OK;
- return temp;
-}
-
/* can be implemented by hw+sw */
extern int jtag_power_dropout(int* dropout);
extern int jtag_srst_asserted(int* srst_asserted);
extern void jtag_check_value_mask(scan_field_t *field, u8 *value, u8 *mask);
extern void jtag_sleep(u32 us);
-extern int jtag_call_event_callbacks(enum jtag_event event);
-extern int jtag_register_event_callback(int (* callback)(enum jtag_event event, void* priv), void* priv);
-
-extern int jtag_verify_capture_ir;
-
-void jtag_tap_handle_event(jtag_tap_t* tap, enum jtag_tap_event e);
/*
* The JTAG subsystem defines a number of error codes,
tap_state_t end_state);
-/**
- * jtag_add_statemove() moves from the current state to @a goal_state.
- *
- * @param goal_state The final TAP state.
- * @return ERROR_OK on success, or an error code on failure.
- *
- * Moves from the current state to the goal \a state.
- *
- * This needs to be handled according to the xsvf spec, see the XSTATE
- * command description. From the XSVF spec, pertaining to XSTATE:
- *
- * For special states known as stable states (Test-Logic-Reset,
- * Run-Test/Idle, Pause-DR, Pause- IR), an XSVF interpreter follows
- * predefined TAP state paths when the starting state is a stable state
- * and when the XSTATE specifies a new stable state. See the STATE
- * command in the [Ref 5] for the TAP state paths between stable
- * states.
- *
- * For non-stable states, XSTATE should specify a state that is only one
- * TAP state transition distance from the current TAP state to avoid
- * undefined TAP state paths. A sequence of multiple XSTATE commands can
- * be issued to transition the TAP through a specific state path.
- *
- * @note Unless @c tms_bits holds a path that agrees with [Ref 5] in the
- * above spec, then this code is not fully conformant to the xsvf spec.
- * This puts a burden on tap_get_tms_path() function from the xsvf spec.
- * If in doubt, you should confirm that that burden is being met.
- *
- * Otherwise, @a goal_state must be immediately reachable in one clock
- * cycle, and does not need to be a stable state.
- */
-extern int jtag_add_statemove(tap_state_t goal_state);
-
/// @returns the number of times the scan queue has been flushed
int jtag_get_flush_queue_count(void);
-void jtag_set_nsrst_delay(unsigned delay);
-unsigned jtag_get_nsrst_delay(void);
-
-void jtag_set_ntrst_delay(unsigned delay);
-unsigned jtag_get_ntrst_delay(void);
-
+int jtag_config_khz(unsigned khz);
void jtag_set_speed_khz(unsigned speed);
unsigned jtag_get_speed_khz(void);
void jtag_set_verify(bool enable);
bool jtag_will_verify(void);
+void jtag_set_verify_capture_ir(bool enable);
+bool jtag_will_verify_capture_ir(void);
+
+/**
+ * Set the current JTAG core execution error, unless one was set
+ * by a previous call previously. Driver or application code must
+ * use jtag_error_clear to reset jtag_error once this routine has been
+ * called with a non-zero error code.
+ */
+void jtag_set_error(int error);
+/// @returns The current value of jtag_error
+int jtag_get_error(void);
+/**
+ * Resets jtag_error to ERROR_OK, returning its previous value.
+ * @returns The previous value of @c jtag_error.
+ */
+int jtag_error_clear(void);
+
#endif /* JTAG_H */
Code Review / openocd.git / blobdiff