#endif
-int jtag_flush_queue_count; /* count # of flushes for profiling / debugging purposes */
+/// The number of JTAG queue flushes (for profiling and debugging purposes).
+static int jtag_flush_queue_count;
static void jtag_add_scan_check(void (*jtag_add_scan)(int in_num_fields, const scan_field_t *in_fields, tap_state_t state),
int in_num_fields, scan_field_t *in_fields, tap_state_t state);
*/
int jtag_error=ERROR_OK;
-typedef struct cmd_queue_page_s
-{
- void *address;
- size_t used;
- struct cmd_queue_page_s *next;
-} cmd_queue_page_t;
-
-#define CMD_QUEUE_PAGE_SIZE (1024 * 1024)
-static cmd_queue_page_t *cmd_queue_pages = NULL;
-
char* jtag_event_strings[] =
{
"JTAG controller reset (RESET or TRST)"
int jtag_trst = 0;
int jtag_srst = 0;
-jtag_command_t *jtag_command_queue = NULL;
-static jtag_command_t **next_command_pointer = &jtag_command_queue;
-static jtag_tap_t *jtag_all_taps = NULL;
+/**
+ * List all TAPs that have been created.
+ */
+static jtag_tap_t *__jtag_all_taps = NULL;
+/**
+ * The number of TAPs in the __jtag_all_taps list, used to track the
+ * assigned chain position to new TAPs
+ */
+static int jtag_num_taps = 0;
enum reset_types jtag_reset_config = RESET_NONE;
tap_state_t cmd_queue_end_state = TAP_RESET;
static int jtag_nsrst_delay = 0; /* default to no nSRST delay */
static int jtag_ntrst_delay = 0; /* default to no nTRST delay */
-/* maximum number of JTAG devices expected in the chain
- */
-#define JTAG_MAX_CHAIN_SIZE 20
-
/* callbacks to inform high-level handlers about JTAG state changes */
jtag_event_callback_t *jtag_event_callbacks;
/* speed in kHz*/
static int speed_khz = 0;
/* flag if the kHz speed was defined */
-static int hasKHz = 0;
+static bool hasKHz = false;
/* jtag interfaces (parport, FTDI-USB, TI-USB, ...)
*/
static int handle_verify_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
static int handle_tms_sequence_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-jtag_tap_t *jtag_AllTaps(void)
+jtag_tap_t *jtag_all_taps(void)
{
- return jtag_all_taps;
+ return __jtag_all_taps;
};
-int jtag_NumTotalTaps(void)
+int jtag_tap_count(void)
{
- jtag_tap_t *t;
- int n;
-
- n = 0;
- t = jtag_AllTaps();
- while(t){
- n++;
- t = t->next_tap;
- }
- return n;
+ return jtag_num_taps;
}
-int jtag_NumEnabledTaps(void)
+int jtag_tap_count_enabled(void)
{
jtag_tap_t *t;
int n;
n = 0;
- t = jtag_AllTaps();
+ t = jtag_all_taps();
while(t){
if( t->enabled ){
n++;
return n;
}
-jtag_tap_t *jtag_TapByString( const char *s )
+/// Append a new TAP to the chain of all taps.
+static void jtag_tap_add(struct jtag_tap_s *t)
+{
+ t->abs_chain_position = jtag_num_taps++;
+
+ jtag_tap_t **tap = &__jtag_all_taps;
+ while(*tap != NULL)
+ tap = &(*tap)->next_tap;
+ *tap = t;
+}
+
+jtag_tap_t *jtag_tap_by_string( const char *s )
{
jtag_tap_t *t;
char *cp;
- t = jtag_AllTaps();
+ t = jtag_all_taps();
/* try name first */
while(t){
if( 0 == strcmp( t->dotted_name, s ) ){
n = strtol( s, &cp, 0 );
if( (s != cp) && (*cp == 0) ){
/* Then it is... */
- t = jtag_TapByAbsPosition(n);
+ t = jtag_tap_by_abs_position(n);
}
}
return t;
}
-jtag_tap_t * jtag_TapByJimObj( Jim_Interp *interp, Jim_Obj *o )
+jtag_tap_t * jtag_tap_by_jim_obj( Jim_Interp *interp, Jim_Obj *o )
{
jtag_tap_t *t;
const char *cp;
cp = "(unknown)";
t = NULL;
} else {
- t = jtag_TapByString( cp );
+ t = jtag_tap_by_string( cp );
}
if( t == NULL ){
Jim_SetResult_sprintf(interp,"Tap: %s is unknown", cp );
}
/* returns a pointer to the n-th device in the scan chain */
-jtag_tap_t * jtag_TapByAbsPosition( int n )
+jtag_tap_t * jtag_tap_by_abs_position( int n )
{
int orig_n;
jtag_tap_t *t;
orig_n = n;
- t = jtag_AllTaps();
+ t = jtag_all_taps();
while( t && (n > 0)) {
n--;
return t;
}
+const char *jtag_tap_name(const jtag_tap_t *tap)
+{
+ return (tap == NULL) ? "(unknown)" : tap->dotted_name;
+}
+
+
int jtag_register_event_callback(int (*callback)(enum jtag_event event, void *priv), void *priv)
{
jtag_event_callback_t **callbacks_p = &jtag_event_callbacks;
return ERROR_OK;
}
-void jtag_queue_command(jtag_command_t * cmd)
-{
- // this command goes on the end, so ensure the queue terminates
- cmd->next = NULL;
-
- jtag_command_t **last_cmd = next_command_pointer;
- assert(NULL != last_cmd);
- assert(NULL == *last_cmd);
- *last_cmd = cmd;
-
- // store location where the next command pointer will be stored
- next_command_pointer = &cmd->next;
-}
-
-void* cmd_queue_alloc(size_t size)
-{
- cmd_queue_page_t **p_page = &cmd_queue_pages;
- int offset;
- u8 *t;
-
- /*
- * WARNING:
- * We align/round the *SIZE* per below
- * so that all pointers returned by
- * this function are reasonably well
- * aligned.
- *
- * If we did not, then an "odd-length" request would cause the
- * *next* allocation to be at an *odd* address, and because
- * this function has the same type of api as malloc() - we
- * must also return pointers that have the same type of
- * alignment.
- *
- * What I do not/have is a reasonable portable means
- * to align by...
- *
- * The solution here, is based on these suggestions.
- * http://gcc.gnu.org/ml/gcc-help/2008-12/msg00041.html
- *
- */
- union worse_case_align {
- int i;
- long l;
- float f;
- void *v;
- };
-#define ALIGN_SIZE (sizeof(union worse_case_align))
-
- /* The alignment process. */
- size = (size + ALIGN_SIZE -1) & (~(ALIGN_SIZE-1));
- /* Done... */
-
- if (*p_page)
- {
- while ((*p_page)->next)
- p_page = &((*p_page)->next);
- if (CMD_QUEUE_PAGE_SIZE - (*p_page)->used < size)
- p_page = &((*p_page)->next);
- }
-
- if (!*p_page)
- {
- *p_page = malloc(sizeof(cmd_queue_page_t));
- (*p_page)->used = 0;
- (*p_page)->address = malloc(CMD_QUEUE_PAGE_SIZE);
- (*p_page)->next = NULL;
- }
-
- offset = (*p_page)->used;
- (*p_page)->used += size;
-
- t=(u8 *)((*p_page)->address);
- return t + offset;
-}
-
-void cmd_queue_free(void)
+static void jtag_checks(void)
{
- cmd_queue_page_t *page = cmd_queue_pages;
-
- while (page)
- {
- cmd_queue_page_t *last = page;
- free(page->address);
- page = page->next;
- free(last);
- }
-
- cmd_queue_pages = NULL;
-}
-
-void jtag_command_queue_reset(void)
-{
- cmd_queue_free();
-
- jtag_command_queue = NULL;
- next_command_pointer = &jtag_command_queue;
-}
-
-static void jtag_prelude1(void)
-{
- if (jtag_trst == 1)
- {
- LOG_WARNING("JTAG command queued, while TRST is low (TAP in reset)");
- jtag_error=ERROR_JTAG_TRST_ASSERTED;
- return;
- }
-
- if (cmd_queue_end_state == TAP_RESET)
- jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
+ assert(jtag_trst == 0);
}
static void jtag_prelude(tap_state_t state)
{
- jtag_prelude1();
+ jtag_checks();
- if (state != TAP_INVALID)
- jtag_add_end_state(state);
+ assert(state!=TAP_INVALID);
- cmd_queue_cur_state = cmd_queue_end_state;
+ cmd_queue_cur_state = state;
}
void jtag_alloc_in_value32(scan_field_t *field)
int retval;
jtag_prelude(state);
- retval=interface_jtag_add_ir_scan(in_num_fields, in_fields, cmd_queue_end_state);
+ retval=interface_jtag_add_ir_scan(in_num_fields, in_fields, state);
if (retval!=ERROR_OK)
jtag_error=retval;
jtag_prelude(state);
- retval=interface_jtag_add_plain_ir_scan(in_num_fields, in_fields, cmd_queue_end_state);
+ retval=interface_jtag_add_plain_ir_scan(in_num_fields, in_fields, state);
if (retval!=ERROR_OK)
jtag_error=retval;
}
jtag_prelude(state);
- retval=interface_jtag_add_dr_scan(in_num_fields, in_fields, cmd_queue_end_state);
+ retval=interface_jtag_add_dr_scan(in_num_fields, in_fields, state);
if (retval!=ERROR_OK)
jtag_error=retval;
}
jtag_prelude(state);
- retval=interface_jtag_add_plain_dr_scan(in_num_fields, in_fields, cmd_queue_end_state);
+ retval=interface_jtag_add_plain_dr_scan(in_num_fields, in_fields, state);
if (retval!=ERROR_OK)
jtag_error=retval;
}
int num_fields, const int* num_bits, const u32* value,
tap_state_t end_state)
{
- if (end_state != TAP_INVALID)
- cmd_queue_end_state = end_state;
+ assert(end_state != TAP_INVALID);
- cmd_queue_cur_state = cmd_queue_end_state;
+ cmd_queue_cur_state = end_state;
interface_jtag_add_dr_out(tap,
num_fields, num_bits, value,
- cmd_queue_end_state);
+ end_state);
}
void jtag_add_tlr(void)
retval=interface_jtag_add_tlr();
if (retval!=ERROR_OK)
jtag_error=retval;
+
+ jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
}
void jtag_add_pathmove(int num_states, const tap_state_t *path)
cur_state = path[i];
}
- jtag_prelude1();
+ jtag_checks();
retval = interface_jtag_add_pathmove(num_states, path);
cmd_queue_cur_state = path[num_states - 1];
jtag_prelude(state);
/* executed by sw or hw fifo */
- retval=interface_jtag_add_runtest(num_cycles, cmd_queue_end_state);
+ retval=interface_jtag_add_runtest(num_cycles, state);
if (retval!=ERROR_OK)
jtag_error=retval;
}
if( num_cycles > 0 )
{
- jtag_prelude1();
+ jtag_checks();
retval = interface_jtag_add_clocks(num_cycles);
if (retval != ERROR_OK)
if (trst_with_tlr)
{
LOG_DEBUG("JTAG reset with RESET instead of TRST");
- jtag_add_end_state(TAP_RESET);
+ jtag_set_end_state(TAP_RESET);
jtag_add_tlr();
- jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
return;
}
}
}
-void jtag_add_end_state(tap_state_t state)
+tap_state_t jtag_set_end_state(tap_state_t state)
{
- cmd_queue_end_state = state;
- if ((cmd_queue_end_state == TAP_DRSHIFT)||(cmd_queue_end_state == TAP_IRSHIFT))
+ if ((state == TAP_DRSHIFT)||(state == TAP_IRSHIFT))
{
LOG_ERROR("BUG: TAP_DRSHIFT/IRSHIFT can't be end state. Calling code should use a larger scan field");
}
+
+ if (state!=TAP_INVALID)
+ cmd_queue_end_state = state;
+ return cmd_queue_end_state;
+}
+
+tap_state_t jtag_get_end_state(void)
+{
+ return cmd_queue_end_state;
}
void jtag_add_sleep(u32 us)
return;
}
-int jtag_scan_size(const scan_command_t *cmd)
-{
- int bit_count = 0;
- int i;
-
- /* count bits in scan command */
- for (i = 0; i < cmd->num_fields; i++)
- {
- bit_count += cmd->fields[i].num_bits;
- }
-
- return bit_count;
-}
-
-int jtag_build_buffer(const scan_command_t *cmd, u8 **buffer)
-{
- int bit_count = 0;
- int i;
-
- bit_count = jtag_scan_size(cmd);
- *buffer = calloc(1,CEIL(bit_count, 8));
-
- bit_count = 0;
-
-#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG("%s num_fields: %i", cmd->ir_scan ? "IRSCAN" : "DRSCAN", cmd->num_fields);
-#endif
-
- for (i = 0; i < cmd->num_fields; i++)
- {
- if (cmd->fields[i].out_value)
- {
-#ifdef _DEBUG_JTAG_IO_
- char* char_buf = buf_to_str(cmd->fields[i].out_value, (cmd->fields[i].num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : cmd->fields[i].num_bits, 16);
-#endif
- buf_set_buf(cmd->fields[i].out_value, 0, *buffer, bit_count, cmd->fields[i].num_bits);
-#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG("fields[%i].out_value[%i]: 0x%s", i, cmd->fields[i].num_bits, char_buf);
- free(char_buf);
-#endif
- }
- else
- {
-#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG("fields[%i].out_value[%i]: NULL", i, cmd->fields[i].num_bits);
-#endif
- }
-
- bit_count += cmd->fields[i].num_bits;
- }
-
-#ifdef _DEBUG_JTAG_IO_
- //LOG_DEBUG("bit_count totalling: %i", bit_count );
-#endif
-
- return bit_count;
-}
-
-int jtag_read_buffer(u8 *buffer, const scan_command_t *cmd)
-{
- int i;
- int bit_count = 0;
- int retval;
-
- /* we return ERROR_OK, unless a check fails, or a handler reports a problem */
- retval = ERROR_OK;
-
- for (i = 0; i < cmd->num_fields; i++)
- {
- /* if neither in_value nor in_handler
- * are specified we don't have to examine this field
- */
- if (cmd->fields[i].in_value)
- {
- int num_bits = cmd->fields[i].num_bits;
- u8 *captured = buf_set_buf(buffer, bit_count, malloc(CEIL(num_bits, 8)), 0, num_bits);
-
-#ifdef _DEBUG_JTAG_IO_
- char *char_buf = buf_to_str(captured, (num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : num_bits, 16);
- LOG_DEBUG("fields[%i].in_value[%i]: 0x%s", i, num_bits, char_buf);
- free(char_buf);
-#endif
-
- if (cmd->fields[i].in_value)
- {
- buf_cpy(captured, cmd->fields[i].in_value, num_bits);
- }
-
- free(captured);
- }
- bit_count += cmd->fields[i].num_bits;
- }
-
- return retval;
-}
-
-static const char *jtag_tap_name(const jtag_tap_t *tap)
-{
- return (tap == NULL) ? "(unknown)" : tap->dotted_name;
-}
-
int jtag_check_value_inner(u8 *captured, u8 *in_check_value, u8 *in_check_mask, int num_bits)
{
int retval = ERROR_OK;
-enum scan_type jtag_scan_type(const scan_command_t *cmd)
-{
- int i;
- int type = 0;
-
- for (i = 0; i < cmd->num_fields; i++)
- {
- if (cmd->fields[i].in_value)
- type |= SCAN_IN;
- if (cmd->fields[i].out_value)
- type |= SCAN_OUT;
- }
-
- return type;
-}
-
int default_interface_jtag_execute_queue(void)
{
if (NULL == jtag)
}
}
+int jtag_get_flush_queue_count(void)
+{
+ return jtag_flush_queue_count;
+}
+
int jtag_execute_queue(void)
{
int retval;
return retval;
}
-int jtag_reset_callback(enum jtag_event event, void *priv)
+static int jtag_reset_callback(enum jtag_event event, void *priv)
{
jtag_tap_t *tap = priv;
alive_sleep(us/1000);
}
-/* Try to examine chain layout according to IEEE 1149.1 §12
- */
-int jtag_examine_chain(void)
+/// maximum number of JTAG devices expected in the chain
+#define JTAG_MAX_CHAIN_SIZE 20
+
+#define EXTRACT_MFG(X) (((X) & 0xffe) >> 1)
+#define EXTRACT_PART(X) (((X) & 0xffff000) >> 12)
+#define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28)
+
+static int jtag_examine_chain_execute(u8 *idcode_buffer, unsigned num_idcode)
+{
+ scan_field_t field = {
+ .tap = NULL,
+ .num_bits = num_idcode * 32,
+ .out_value = idcode_buffer,
+ .in_value = idcode_buffer,
+ };
+
+ // initialize to the end of chain ID value
+ for (unsigned i = 0; i < JTAG_MAX_CHAIN_SIZE; i++)
+ buf_set_u32(idcode_buffer, i * 32, 32, 0x000000FF);
+
+ jtag_add_plain_dr_scan(1, &field, TAP_RESET);
+ return jtag_execute_queue();
+}
+
+static bool jtag_examine_chain_check(u8 *idcodes, unsigned count)
{
- jtag_tap_t *tap;
- scan_field_t field;
- u8 idcode_buffer[JTAG_MAX_CHAIN_SIZE * 4];
- int i;
- int bit_count;
- int device_count = 0;
u8 zero_check = 0x0;
u8 one_check = 0xff;
- field.tap = NULL;
- field.num_bits = sizeof(idcode_buffer) * 8;
- field.out_value = idcode_buffer;
-
- field.in_value = idcode_buffer;
+ for (unsigned i = 0; i < count * 4; i++)
+ {
+ zero_check |= idcodes[i];
+ one_check &= idcodes[i];
+ }
+ /* if there wasn't a single non-zero bit or if all bits were one,
+ * the scan is not valid */
+ if (zero_check == 0x00 || one_check == 0xff)
+ {
+ LOG_ERROR("JTAG communication failure: check connection, "
+ "JTAG interface, target power etc.");
+ return false;
+ }
+ return true;
+}
+static void jtag_examine_chain_display(enum log_levels level, const char *msg,
+ const char *name, u32 idcode)
+{
+ log_printf_lf(level, __FILE__, __LINE__, __FUNCTION__,
+ "JTAG tap: %s %16.16s: 0x%08x "
+ "(mfg: 0x%3.3x, part: 0x%4.4x, ver: 0x%1.1x)",
+ name, msg, idcode,
+ EXTRACT_MFG(idcode), EXTRACT_PART(idcode), EXTRACT_VER(idcode) );
+}
+static bool jtag_idcode_is_final(u32 idcode)
+{
+ return idcode == 0x000000FF || idcode == 0xFFFFFFFF;
+}
- for (i = 0; i < JTAG_MAX_CHAIN_SIZE; i++)
+/**
+ * This helper checks that remaining bits in the examined chain data are
+ * all as expected, but a single JTAG device requires only 64 bits to be
+ * read back correctly. This can help identify and diagnose problems
+ * with the JTAG chain earlier, gives more helpful/explicit error messages.
+ */
+static void jtag_examine_chain_end(u8 *idcodes, unsigned count, unsigned max)
+{
+ bool triggered = false;
+ for ( ; count < max - 31; count += 32)
{
- buf_set_u32(idcode_buffer, i * 32, 32, 0x000000FF);
+ u32 idcode = buf_get_u32(idcodes, count, 32);
+ // do not trigger the warning if the data looks good
+ if (!triggered && jtag_idcode_is_final(idcode))
+ continue;
+ LOG_WARNING("Unexpected idcode after end of chain: %d 0x%08x",
+ count, idcode);
+ triggered = true;
}
+}
- jtag_add_plain_dr_scan(1, &field, TAP_RESET);
- jtag_execute_queue();
+static bool jtag_examine_chain_match_tap(const struct jtag_tap_s *tap)
+{
+ if (0 == tap->expected_ids_cnt)
+ {
+ /// @todo Enable LOG_INFO to ask for reports about unknown TAP IDs.
+#if 0
+ LOG_INFO("Uknown JTAG TAP ID: 0x%08x", tap->idcode)
+ LOG_INFO("Please report the chip name and reported ID code to the openocd project");
+#endif
+ return true;
+ }
- for (i = 0; i < JTAG_MAX_CHAIN_SIZE * 4; i++)
+ /* Loop over the expected identification codes and test for a match */
+ u8 ii;
+ for (ii = 0; ii < tap->expected_ids_cnt; ii++)
{
- zero_check |= idcode_buffer[i];
- one_check &= idcode_buffer[i];
+ if (tap->idcode == tap->expected_ids[ii])
+ break;
}
- /* if there wasn't a single non-zero bit or if all bits were one, the scan isn't valid */
- if ((zero_check == 0x00) || (one_check == 0xff))
+ /* If none of the expected ids matched, log an error */
+ if (ii != tap->expected_ids_cnt)
{
- LOG_ERROR("JTAG communication failure, check connection, JTAG interface, target power etc.");
- return ERROR_JTAG_INIT_FAILED;
+ LOG_INFO("JTAG Tap/device matched");
+ return true;
+ }
+ jtag_examine_chain_display(LOG_LVL_ERROR, "got",
+ tap->dotted_name, tap->idcode);
+ for (ii = 0; ii < tap->expected_ids_cnt; ii++)
+ {
+ char msg[32];
+ snprintf(msg, sizeof(msg), "expected %hhu of %hhu",
+ ii + 1, tap->expected_ids_cnt);
+ jtag_examine_chain_display(LOG_LVL_ERROR, msg,
+ tap->dotted_name, tap->expected_ids[ii]);
}
+ return false;
+}
+
+/* Try to examine chain layout according to IEEE 1149.1 §12
+ */
+static int jtag_examine_chain(void)
+{
+ u8 idcode_buffer[JTAG_MAX_CHAIN_SIZE * 4];
+ int device_count = 0;
+
+ jtag_examine_chain_execute(idcode_buffer, JTAG_MAX_CHAIN_SIZE);
+
+ if (!jtag_examine_chain_check(idcode_buffer, JTAG_MAX_CHAIN_SIZE))
+ return ERROR_JTAG_INIT_FAILED;
/* point at the 1st tap */
- tap = jtag_NextEnabledTap(NULL);
- if( tap == NULL ){
+ jtag_tap_t *tap = jtag_tap_next_enabled(NULL);
+ if (tap == NULL)
+ {
LOG_ERROR("JTAG: No taps enabled?");
return ERROR_JTAG_INIT_FAILED;
}
- for (bit_count = 0; bit_count < (JTAG_MAX_CHAIN_SIZE * 32) - 31;)
+ for (unsigned bit_count = 0; bit_count < (JTAG_MAX_CHAIN_SIZE * 32) - 31;)
{
u32 idcode = buf_get_u32(idcode_buffer, bit_count, 32);
if ((idcode & 1) == 0)
{
/* LSB must not be 0, this indicates a device in bypass */
LOG_WARNING("Tap/Device does not have IDCODE");
- idcode=0;
+ idcode = 0;
bit_count += 1;
}
else
{
- u32 manufacturer;
- u32 part;
- u32 version;
-
- /* some devices, such as AVR will output all 1's instead of TDI
- input value at end of chain. */
- if ((idcode == 0x000000FF)||(idcode == 0xFFFFFFFF))
+ /*
+ * End of chain (invalid manufacturer ID) some devices, such
+ * as AVR will output all 1's instead of TDI input value at
+ * end of chain.
+ */
+ if (jtag_idcode_is_final(idcode))
{
- int unexpected=0;
- /* End of chain (invalid manufacturer ID)
- *
- * The JTAG examine is the very first thing that happens
- *
- * A single JTAG device requires only 64 bits to be read back correctly.
- *
- * The code below adds a check that the rest of the data scanned (640 bits)
- * are all as expected. This helps diagnose/catch problems with the JTAG chain
- *
- * earlier and gives more helpful/explicit error messages.
- */
- for (bit_count += 32; bit_count < (JTAG_MAX_CHAIN_SIZE * 32) - 31;bit_count += 32)
- {
- idcode = buf_get_u32(idcode_buffer, bit_count, 32);
- if (unexpected||((idcode != 0x000000FF)&&(idcode != 0xFFFFFFFF)))
- {
- LOG_WARNING("Unexpected idcode after end of chain! %d 0x%08x", bit_count, idcode);
- unexpected = 1;
- }
- }
-
+ jtag_examine_chain_end(idcode_buffer,
+ bit_count + 32, JTAG_MAX_CHAIN_SIZE * 32);
break;
}
-#define EXTRACT_MFG(X) (((X) & 0xffe) >> 1)
- manufacturer = EXTRACT_MFG(idcode);
-#define EXTRACT_PART(X) (((X) & 0xffff000) >> 12)
- part = EXTRACT_PART(idcode);
-#define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28)
- version = EXTRACT_VER(idcode);
-
- LOG_INFO("JTAG tap: %s tap/device found: 0x%8.8x (Manufacturer: 0x%3.3x, Part: 0x%4.4x, Version: 0x%1.1x)",
- ((tap != NULL) ? (tap->dotted_name) : "(not-named)"),
- idcode, manufacturer, part, version);
+ jtag_examine_chain_display(LOG_LVL_INFO, "tap/device found",
+ tap ? tap->dotted_name : "(not-named)",
+ idcode);
bit_count += 32;
}
- if (tap)
- {
- tap->idcode = idcode;
-
- if (tap->expected_ids_cnt > 0) {
- /* Loop over the expected identification codes and test for a match */
- u8 ii;
- for (ii = 0; ii < tap->expected_ids_cnt; ii++) {
- if( tap->idcode == tap->expected_ids[ii] ){
- break;
- }
- }
+ device_count++;
+ if (!tap)
+ continue;
- /* If none of the expected ids matched, log an error */
- if (ii == tap->expected_ids_cnt) {
- LOG_ERROR("JTAG tap: %s got: 0x%08x (mfg: 0x%3.3x, part: 0x%4.4x, ver: 0x%1.1x)",
- tap->dotted_name,
- idcode,
- EXTRACT_MFG( tap->idcode ),
- EXTRACT_PART( tap->idcode ),
- EXTRACT_VER( tap->idcode ) );
- for (ii = 0; ii < tap->expected_ids_cnt; ii++) {
- LOG_ERROR("JTAG tap: %s expected %hhu of %hhu: 0x%08x (mfg: 0x%3.3x, part: 0x%4.4x, ver: 0x%1.1x)",
- tap->dotted_name,
- ii + 1,
- tap->expected_ids_cnt,
- tap->expected_ids[ii],
- EXTRACT_MFG( tap->expected_ids[ii] ),
- EXTRACT_PART( tap->expected_ids[ii] ),
- EXTRACT_VER( tap->expected_ids[ii] ) );
- }
+ tap->idcode = idcode;
- return ERROR_JTAG_INIT_FAILED;
- } else {
- LOG_INFO("JTAG Tap/device matched");
- }
- } else {
-#if 0
- LOG_INFO("JTAG TAP ID: 0x%08x - Unknown - please report (A) chipname and (B) idcode to the openocd project",
- tap->idcode);
-#endif
- }
- tap = jtag_NextEnabledTap(tap);
- }
- device_count++;
+ // ensure the TAP ID does matches what was expected
+ if (!jtag_examine_chain_match_tap(tap))
+ return ERROR_JTAG_INIT_FAILED;
+
+ tap = jtag_tap_next_enabled(tap);
}
/* see if number of discovered devices matches configuration */
- if (device_count != jtag_NumEnabledTaps())
+ if (device_count != jtag_tap_count_enabled())
{
- LOG_ERROR("number of discovered devices in JTAG chain (%i) doesn't match (enabled) configuration (%i), total taps: %d",
- device_count, jtag_NumEnabledTaps(), jtag_NumTotalTaps());
- LOG_ERROR("check the config file and ensure proper JTAG communication (connections, speed, ...)");
+ LOG_ERROR("number of discovered devices in JTAG chain (%i) "
+ "does not match (enabled) configuration (%i), total taps: %d",
+ device_count, jtag_tap_count_enabled(), jtag_tap_count());
+ LOG_ERROR("check the config file and ensure proper JTAG communication"
+ " (connections, speed, ...)");
return ERROR_JTAG_INIT_FAILED;
}
return ERROR_OK;
}
-int jtag_validate_chain(void)
+static int jtag_validate_chain(void)
{
jtag_tap_t *tap;
int total_ir_length = 0;
tap = NULL;
total_ir_length = 0;
for(;;){
- tap = jtag_NextEnabledTap(tap);
+ tap = jtag_tap_next_enabled(tap);
if( tap == NULL ){
break;
}
chain_pos = 0;
int val;
for(;;){
- tap = jtag_NextEnabledTap(tap);
+ tap = jtag_tap_next_enabled(tap);
if( tap == NULL ){
break;
}
return JIM_OK;
}
+
+static void jtag_tap_init(jtag_tap_t *tap)
+{
+ assert(0 != tap->ir_length);
+
+ tap->expected = malloc(tap->ir_length);
+ tap->expected_mask = malloc(tap->ir_length);
+ tap->cur_instr = malloc(tap->ir_length);
+
+ buf_set_u32(tap->expected, 0, tap->ir_length, tap->ir_capture_value);
+ buf_set_u32(tap->expected_mask, 0, tap->ir_length, tap->ir_capture_mask);
+ buf_set_ones(tap->cur_instr, tap->ir_length);
+
+ // place TAP in bypass mode
+ tap->bypass = 1;
+ // register the reset callback for the TAP
+ jtag_register_event_callback(&jtag_reset_callback, tap);
+
+ LOG_DEBUG("Created Tap: %s @ abs position %d, "
+ "irlen %d, capture: 0x%x mask: 0x%x", tap->dotted_name,
+ tap->abs_chain_position, tap->ir_length,
+ tap->ir_capture_value, tap->ir_capture_mask);
+ jtag_tap_add(tap);
+}
+
+static void jtag_tap_free(jtag_tap_t *tap)
+{
+ /// @todo is anything missing? no memory leaks please
+ free((void *)tap->expected_ids);
+ free((void *)tap->chip);
+ free((void *)tap->tapname);
+ free((void *)tap->dotted_name);
+ free(tap);
+}
+
static int jim_newtap_cmd( Jim_GetOptInfo *goi )
{
jtag_tap_t *pTap;
- jtag_tap_t **ppTap;
jim_wide w;
int x;
int e;
} /* switch(n->value) */
} /* while( goi->argc ) */
- /* Did we get all the options? */
- if( reqbits ){
- // no
- Jim_SetResult_sprintf( goi->interp,
- "newtap: %s missing required parameters",
- pTap->dotted_name);
- /* TODO: Tell user what is missing :-( */
- /* no memory leaks pelase */
- free(((void *)(pTap->expected_ids)));
- free(((void *)(pTap->chip)));
- free(((void *)(pTap->tapname)));
- free(((void *)(pTap->dotted_name)));
- free(((void *)(pTap)));
- return JIM_ERR;
- }
-
- pTap->expected = malloc( pTap->ir_length );
- pTap->expected_mask = malloc( pTap->ir_length );
- pTap->cur_instr = malloc( pTap->ir_length );
-
- buf_set_u32( pTap->expected,
- 0,
- pTap->ir_length,
- pTap->ir_capture_value );
- buf_set_u32( pTap->expected_mask,
- 0,
- pTap->ir_length,
- pTap->ir_capture_mask );
- buf_set_ones( pTap->cur_instr,
- pTap->ir_length );
-
- pTap->bypass = 1;
-
- jtag_register_event_callback(jtag_reset_callback, pTap );
-
- ppTap = &(jtag_all_taps);
- while( (*ppTap) != NULL ){
- ppTap = &((*ppTap)->next_tap);
- }
- *ppTap = pTap;
+ /* Did all the required option bits get cleared? */
+ if (0 == reqbits)
{
- static int n_taps = 0;
- pTap->abs_chain_position = n_taps++;
+ jtag_tap_init(pTap);
+ return ERROR_OK;
}
- LOG_DEBUG( "Created Tap: %s @ abs position %d, irlen %d, capture: 0x%x mask: 0x%x",
- (*ppTap)->dotted_name,
- (*ppTap)->abs_chain_position,
- (*ppTap)->ir_length,
- (*ppTap)->ir_capture_value,
- (*ppTap)->ir_capture_mask );
- return ERROR_OK;
+ Jim_SetResult_sprintf(goi->interp,
+ "newtap: %s missing required parameters",
+ pTap->dotted_name);
+ jtag_tap_free(pTap);
+ return JIM_ERR;
}
static int jim_jtag_command( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
{
jtag_tap_t *t;
- t = jtag_TapByJimObj( goi.interp, goi.argv[0] );
+ t = jtag_tap_by_jim_obj( goi.interp, goi.argv[0] );
if( t == NULL ){
return JIM_ERR;
}
jtag_tap_t *t;
Jim_GetOpt_Obj(&goi, &o);
- t = jtag_TapByJimObj( goi.interp, o );
+ t = jtag_tap_by_jim_obj( goi.interp, o );
if( t == NULL ){
return JIM_ERR;
}
jtag_tap_t *t;
Jim_GetOpt_Obj(&goi, &o);
- t = jtag_TapByJimObj( goi.interp, o );
+ t = jtag_tap_by_jim_obj( goi.interp, o );
if( t == NULL ){
return JIM_ERR;
}
}
if(hasKHz)
{
- jtag_interface->khz(speed_khz, &jtag_speed);
- hasKHz = 0;
+ jtag_interface->khz(jtag_get_speed_khz(), &jtag_speed);
+ hasKHz = false;
}
if (jtag_interface->init() != ERROR_OK)
LOG_DEBUG("Init JTAG chain");
- tap = jtag_NextEnabledTap(NULL);
+ tap = jtag_tap_next_enabled(NULL);
if( tap == NULL ){
LOG_ERROR("There are no enabled taps?");
return ERROR_JTAG_INIT_FAILED;
return jtag_init_reset(cmd_ctx);
}
+void jtag_set_speed_khz(unsigned khz)
+{
+ speed_khz = khz;
+}
+unsigned jtag_get_speed_khz(void)
+{
+ return speed_khz;
+}
+
static int default_khz(int khz, int *jtag_speed)
{
LOG_ERROR("Translation from khz to jtag_speed not implemented");
newargs[0] = Jim_NewStringObj( interp, "jtag", -1 );
newargs[1] = Jim_NewStringObj( interp, "newtap", -1 );
- sprintf( buf, "chip%d", jtag_NumTotalTaps() );
+ sprintf( buf, "chip%d", jtag_tap_count() );
newargs[2] = Jim_NewStringObj( interp, buf, -1 );
- sprintf( buf, "tap%d", jtag_NumTotalTaps() );
+ sprintf( buf, "tap%d", jtag_tap_count() );
newargs[3] = Jim_NewStringObj( interp, buf, -1 );
newargs[4] = Jim_NewStringObj( interp, "-irlen", -1 );
newargs[5] = Jim_NewStringObj( interp, args[0], -1 );
{
jtag_tap_t *tap;
- tap = jtag_all_taps;
+ tap = jtag_all_taps();
command_print(cmd_ctx, " TapName | Enabled | IdCode Expected IrLen IrCap IrMask Instr ");
command_print(cmd_ctx, "---|--------------------|---------|------------|------------|------|------|------|---------");
}
else
{
- jtag_nsrst_delay = strtoul(args[0], NULL, 0);
+ jtag_set_nsrst_delay(strtoul(args[0], NULL, 0));
}
return ERROR_OK;
}
else
{
- jtag_ntrst_delay = strtoul(args[0], NULL, 0);
+ jtag_set_ntrst_delay(strtoul(args[0], NULL, 0));
}
return ERROR_OK;
}
+
static int handle_jtag_speed_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
int retval=ERROR_OK;
int retval=ERROR_OK;
LOG_DEBUG("handle jtag khz");
+ int cur_speed = 0;
if(argc == 1)
{
- speed_khz = strtoul(args[0], NULL, 0);
+ jtag_set_speed_khz(strtoul(args[0], NULL, 0));
if (jtag != NULL)
{
- int cur_speed = 0;
LOG_DEBUG("have interface set up");
int speed_div1;
- if ((retval=jtag->khz(speed_khz, &speed_div1))!=ERROR_OK)
+ if ((retval=jtag->khz(jtag_get_speed_khz(), &speed_div1))!=ERROR_OK)
{
- speed_khz = 0;
+ jtag_set_speed_khz(0);
return retval;
}
retval=jtag->speed(cur_speed);
} else
{
- hasKHz = 1;
+ hasKHz = true;
}
} else if (argc==0)
{
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
+ cur_speed = jtag_get_speed_khz();
if (jtag!=NULL)
{
- if ((retval=jtag->speed_div(jtag_speed, &speed_khz))!=ERROR_OK)
+ if ((retval=jtag->speed_div(jtag_speed, &cur_speed))!=ERROR_OK)
return retval;
}
- if (speed_khz==0)
- {
+ if (cur_speed)
+ command_print(cmd_ctx, "%d kHz", cur_speed);
+ else
command_print(cmd_ctx, "RCLK - adaptive");
- } else
- {
- command_print(cmd_ctx, "%d kHz", speed_khz);
- }
return retval;
}
static int handle_endstate_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
- tap_state_t state;
-
if (argc < 1)
- {
return ERROR_COMMAND_SYNTAX_ERROR;
- }
- else
+
+ tap_state_t state = tap_state_by_name(args[0]);
+ if (state < 0)
{
- state = tap_state_by_name( args[0] );
- if( state < 0 ){
- command_print( cmd_ctx, "Invalid state name: %s\n", args[0] );
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
- jtag_add_end_state(state);
- jtag_execute_queue();
+ command_print( cmd_ctx, "Invalid state name: %s\n", args[0] );
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
- command_print(cmd_ctx, "current endstate: %s", tap_state_name(cmd_queue_end_state));
+ jtag_set_end_state(state);
+ jtag_execute_queue();
+
+ command_print(cmd_ctx, "current endstate: %s",
+ tap_state_name(cmd_queue_end_state));
return ERROR_OK;
}
return ERROR_COMMAND_SYNTAX_ERROR;
}
- jtag_add_runtest(strtol(args[0], NULL, 0), TAP_INVALID);
+ jtag_add_runtest(strtol(args[0], NULL, 0), jtag_get_end_state());
jtag_execute_queue();
return ERROR_OK;
for (i = 0; i < num_fields; i++)
{
- tap = jtag_TapByString( args[i*2] );
+ tap = jtag_tap_by_string( args[i*2] );
if (tap==NULL)
{
command_print( cmd_ctx, "Tap: %s unknown", args[i*2] );
}
} /* validate args */
- tap = jtag_TapByJimObj( interp, args[1] );
+ tap = jtag_tap_by_jim_obj( interp, args[1] );
if( tap == NULL ){
return JIM_ERR;
}
static int Jim_Command_flush_count(Jim_Interp *interp, int argc, Jim_Obj *const *args)
{
- Jim_SetResult(interp, Jim_NewIntObj(interp, jtag_flush_queue_count));
+ Jim_SetResult(interp, Jim_NewIntObj(interp, jtag_get_flush_queue_count()));
return JIM_OK;
}
return ERROR_OK;
}
+void jtag_set_verify(bool enable)
+{
+ jtag_verify = enable;
+}
+
+bool jtag_will_verify()
+{
+ return jtag_verify;
+}
+
static int handle_verify_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
+ if (argc > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
if (argc == 1)
{
if (strcmp(args[0], "enable") == 0)
- {
- jtag_verify = 1;
- }
+ jtag_set_verify(true);
else if (strcmp(args[0], "disable") == 0)
- {
- jtag_verify = 0;
- } else
- {
+ jtag_set_verify(false);
+ else
return ERROR_COMMAND_SYNTAX_ERROR;
- }
- } else if (argc != 0)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
}
- command_print(cmd_ctx, "verify jtag capture is %s", (jtag_verify) ? "enabled": "disabled");
+ const char *status = jtag_will_verify() ? "enabled": "disabled";
+ command_print(cmd_ctx, "verify jtag capture is %s", status);
return ERROR_OK;
}
jtag_add_pathmove(tms_count, moves);
}
- /* else state must be immediately reachable in one clock cycle, and does not
+ /* else state must be immediately reachable in one clock cycle, and does not
need to be a stable state.
*/
else if( tap_state_transition(cur_state, true) == goal_state
return retval;
}
+void jtag_set_nsrst_delay(unsigned delay)
+{
+ jtag_nsrst_delay = delay;
+}
+void jtag_set_ntrst_delay(unsigned delay)
+{
+ jtag_ntrst_delay = delay;
+}
+
+
Code Review / openocd.git / blobdiff