* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
+ * Copyright (C) 2011 by Jean-Christophe PLAGNIOL-VIILARD *
+ * plagnioj@jcrosoft.com *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
http://www.segger.com/cms/admin/uploads/productDocs/RM08001_JLinkUSBProtocol.pdf
*/
-#define VID 0x1366
-#define PID 0x0101
+/*
+ * The default pid of the segger is 0x0101
+ * But when you change the USB Address it will also
+ *
+ * pid = ( usb_address > 0x4) ? 0x0101 : (0x101 + usb_address)
+ */
+#define VID 0x1366, 0x1366, 0x1366, 0x1366
+#define PID 0x0101, 0x0102, 0x0103, 0x0104
#define JLINK_WRITE_ENDPOINT 0x02
#define JLINK_READ_ENDPOINT 0x81
#define JLINK_USB_TIMEOUT 1000
-// See Section 1.3.2 of the Segger JLink USB protocol manual
+// See Section 3.3.2 of the Segger JLink USB protocol manual
/* 2048 is the max value we can use here */
-//#define JLINK_TAP_BUFFER_SIZE 2048
-#define JLINK_TAP_BUFFER_SIZE 256
+#define JLINK_TAP_BUFFER_SIZE 2048
+//#define JLINK_TAP_BUFFER_SIZE 256
//#define JLINK_TAP_BUFFER_SIZE 384
#define JLINK_IN_BUFFER_SIZE 2048
#define EMU_CMD_HW_TRST1 0xdf
#define EMU_CMD_GET_CAPS 0xe8
#define EMU_CMD_GET_HW_VERSION 0xf0
+#define EMU_CMD_READ_CONFIG 0xf2
+#define EMU_CMD_WRITE_CONFIG 0xf3
/* bits return from EMU_CMD_GET_CAPS */
+#define EMU_CAP_RESERVED_1 0
#define EMU_CAP_GET_HW_VERSION 1
+#define EMU_CAP_WRITE_DCC 2
+#define EMU_CAP_ADAPTIVE_CLOCKING 3
+#define EMU_CAP_READ_CONFIG 4
+#define EMU_CAP_WRITE_CONFIG 5
+#define EMU_CAP_TRACE 6
+#define EMU_CAP_WRITE_MEM 7
+#define EMU_CAP_READ_MEM 8
+#define EMU_CAP_SPEED_INFO 9
+#define EMU_CAP_EXEC_CODE 10
#define EMU_CAP_GET_MAX_BLOCK_SIZE 11
+#define EMU_CAP_GET_HW_INFO 12
+#define EMU_CAP_SET_KS_POWER 13
+#define EMU_CAP_RESET_STOP_TIMED 14
+#define EMU_CAP_RESERVED_2 15
+#define EMU_CAP_MEASURE_RTCK_REACT 16
+#define EMU_CAP_SELECT_IF 17
+#define EMU_CAP_RW_MEM_ARM79 18
+#define EMU_CAP_GET_COUNTERS 19
+#define EMU_CAP_READ_DCC 20
+#define EMU_CAP_GET_CPU_CAPS 21
+#define EMU_CAP_EXEC_CPU_CMD 22
+#define EMU_CAP_SWO 23
+#define EMU_CAP_WRITE_DCC_EX 24
+#define EMU_CAP_UPDATE_FIRMWARE_EX 25
+#define EMU_CAP_FILE_IO 26
+#define EMU_CAP_REGISTER 27
+#define EMU_CAP_INDICATORS 28
+#define EMU_CAP_TEST_NET_SPEED 29
+#define EMU_CAP_RAWTRACE 30
+#define EMU_CAP_RESERVED_3 31
+
+static char *jlink_cap_str[] = {
+ "Always 1.",
+ "Supports command EMU_CMD_GET_HARDWARE_VERSION",
+ "Supports command EMU_CMD_WRITE_DCC",
+ "Supports adaptive clocking",
+ "Supports command EMU_CMD_READ_CONFIG",
+ "Supports command EMU_CMD_WRITE_CONFIG",
+ "Supports trace commands",
+ "Supports command EMU_CMD_WRITE_MEM",
+ "Supports command EMU_CMD_READ_MEM",
+ "Supports command EMU_CMD_GET_SPEED",
+ "Supports command EMU_CMD_CODE_...",
+ "Supports command EMU_CMD_GET_MAX_BLOCK_SIZE",
+ "Supports command EMU_CMD_GET_HW_INFO",
+ "Supports command EMU_CMD_SET_KS_POWER",
+ "Supports command EMU_CMD_HW_RELEASE_RESET_STOP_TIMED",
+ "Reserved",
+ "Supports command EMU_CMD_MEASURE_RTCK_REACT",
+ "Supports command EMU_CMD_HW_SELECT_IF",
+ "Supports command EMU_CMD_READ/WRITE_MEM_ARM79",
+ "Supports command EMU_CMD_GET_COUNTERS",
+ "Supports command EMU_CMD_READ_DCC",
+ "Supports command EMU_CMD_GET_CPU_CAPS",
+ "Supports command EMU_CMD_EXEC_CPU_CMD",
+ "Supports command EMU_CMD_SWO",
+ "Supports command EMU_CMD_WRITE_DCC_EX",
+ "Supports command EMU_CMD_UPDATE_FIRMWARE_EX",
+ "Supports command EMU_CMD_FILE_IO",
+ "Supports command EMU_CMD_REGISTER",
+ "Supports command EMU_CMD_INDICATORS",
+ "Supports command EMU_CMD_TEST_NET_SPEED",
+ "Supports command EMU_CMD_RAWTRACE",
+ "Reserved",
+};
/* max speed 12MHz v5.0 jlink */
#define JLINK_MAX_SPEED 12000
+/* J-Link hardware versions */
+#define JLINK_HW_TYPE_JLINK 0
+#define JLINK_HW_TYPE_JTRACE 1
+#define JLINK_HW_TYPE_FLASHER 2
+#define JLINK_HW_TYPE_JLINK_PRO 3
+#define JLINK_HW_TYPE_MAX 4
+
+static char *jlink_hw_type_str[] = {
+ "J-Link",
+ "J-Trace",
+ "Flasher",
+ "J-Link Pro",
+};
+
/* Queue command functions */
static void jlink_end_state(tap_state_t state);
static void jlink_state_move(void);
#ifdef _DEBUG_USB_COMMS_
static void jlink_debug_buffer(uint8_t *buffer, int length);
+#else
+static inline void jlink_debug_buffer(uint8_t *buffer, int length)
+{
+}
#endif
static enum tap_state jlink_last_state = TAP_RESET;
static struct jlink* jlink_handle;
+/* pid could be specified at runtime */
+static uint16_t vids[] = { VID, 0 };
+static uint16_t pids[] = { PID, 0 };
+
+static uint32_t jlink_caps;
+static uint32_t jlink_hw_type;
+
+/* 256 byte non-volatile memory */
+struct jlink_config {
+ uint8_t usb_address;
+ /* 0ffset 0x01 to 0x03 */
+ uint8_t reserved_1[3];
+ uint32_t kickstart_power_on_jtag_pin_19;
+ /* 0ffset 0x08 to 0x1f */
+ uint8_t reserved_2[24];
+ /* IP only for J-Link Pro */
+ uint8_t ip_address[4];
+ uint8_t subnet_mask[4];
+ /* 0ffset 0x28 to 0x2f */
+ uint8_t reserved_3[8];
+ uint8_t mac_address[6];
+ /* 0ffset 0x36 to 0xff */
+ uint8_t reserved_4[202];
+} __attribute__ ((packed));
+struct jlink_config jlink_cfg;
+
/***************************************************************************/
/* External interface implementation */
scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer);
DEBUG_JTAG_IO("scan input, length = %d", scan_size);
-#ifdef _DEBUG_USB_COMMS_
jlink_debug_buffer(buffer, (scan_size + 7) / 8);
-#endif
type = jtag_scan_type(cmd->cmd.scan);
jlink_scan(cmd->cmd.scan->ir_scan,
type, buffer, scan_size, cmd->cmd.scan);
if (speed > JLINK_MAX_SPEED)
{
- LOG_INFO("Ignoring speed request: %dkHz exceeds %dkHz maximum",
+ LOG_INFO("reduce speed request: %dkHz to %dkHz maximum",
speed, JLINK_MAX_SPEED);
- return ERROR_OK;
+ speed = JLINK_MAX_SPEED;
}
/* check for RTCK setting */
jlink_reset(0, 0);
jtag_sleep(3000);
jlink_tap_init();
- int jtag_speed_var;
- int retval = jtag_get_speed(&jtag_speed_var);
- if (retval != ERROR_OK)
- return retval;
- jlink_speed(jtag_speed_var);
/* v5/6 jlink seems to have an issue if the first tap move
* is not divisible by 8, so we send a TLR on first power up */
result = jlink_usb_read(jlink_handle, 8);
if (result != 8)
{
- LOG_ERROR("J-Link command EMU_CMD_GET_STATE failed (%d)\n", result);
+ LOG_ERROR("J-Link command EMU_CMD_GET_STATE failed (%d)", result);
return ERROR_JTAG_DEVICE_ERROR;
}
return ERROR_OK;
}
+#define jlink_dump_printf(context, expr ...) \
+ do { \
+ if (context) \
+ command_print(context, expr); \
+ else \
+ LOG_INFO(expr); \
+ } while(0);
+
+
+static void jlink_caps_dump(struct command_context *ctx)
+{
+ int i;
+
+ jlink_dump_printf(ctx, "J-Link Capabilities");
+
+ for (i = 1; i < 31; i++)
+ if (jlink_caps & (1 << i))
+ jlink_dump_printf(ctx, "%s", jlink_cap_str[i]);
+}
+
+static void jlink_config_usb_address_dump(struct command_context *ctx, struct jlink_config *cfg)
+{
+ if (!cfg)
+ return;
+
+ jlink_dump_printf(ctx, "USB-Address: 0x%x", cfg->usb_address);
+}
+
+static void jlink_config_kickstart_dump(struct command_context *ctx, struct jlink_config *cfg)
+{
+ if (!cfg)
+ return;
+
+ jlink_dump_printf(ctx, "Kickstart power on JTAG-pin 19: 0x%x",
+ cfg->kickstart_power_on_jtag_pin_19);
+}
+
+static void jlink_config_mac_address_dump(struct command_context *ctx, struct jlink_config *cfg)
+{
+ if (!cfg)
+ return;
+
+ jlink_dump_printf(ctx, "MAC Address: %.02x:%.02x:%.02x:%.02x:%.02x:%.02x",
+ cfg->mac_address[5], cfg->mac_address[4],
+ cfg->mac_address[3], cfg->mac_address[2],
+ cfg->mac_address[1], cfg->mac_address[0]);
+}
+
+static void jlink_config_ip_dump(struct command_context *ctx, struct jlink_config *cfg)
+{
+ if (!cfg)
+ return;
+
+ jlink_dump_printf(ctx, "IP Address: %d.%d.%d.%d",
+ cfg->ip_address[3], cfg->ip_address[2],
+ cfg->ip_address[1], cfg->ip_address[0]);
+ jlink_dump_printf(ctx, "Subnet Mask: %d.%d.%d.%d",
+ cfg->subnet_mask[3], cfg->subnet_mask[2],
+ cfg->subnet_mask[1], cfg->subnet_mask[0]);
+}
+
+static void jlink_config_dump(struct command_context *ctx, struct jlink_config *cfg)
+{
+ if (!cfg)
+ return;
+
+ jlink_dump_printf(ctx, "J-Link configuration");
+ jlink_config_usb_address_dump(ctx, cfg);
+ jlink_config_kickstart_dump(ctx, cfg);
+
+ if (jlink_hw_type == JLINK_HW_TYPE_JLINK_PRO)
+ {
+ jlink_config_ip_dump(ctx, cfg);
+ jlink_config_mac_address_dump(ctx, cfg);
+ }
+}
+
+static int jlink_get_config(struct jlink_config *cfg)
+{
+ int result;
+ int size = sizeof(struct jlink_config);
+
+ jlink_simple_command(EMU_CMD_READ_CONFIG);
+
+ result = jlink_usb_read(jlink_handle, size);
+ if (size != result)
+ {
+ LOG_ERROR("jlink_usb_read failed (requested=%d, result=%d)", size, result);
+ return ERROR_FAIL;
+ }
+
+ memcpy(cfg, usb_in_buffer, size);
+
+ /*
+ * Section 4.2.4 IN-transaction
+ * read dummy 0-byte packet
+ */
+ jlink_usb_read(jlink_handle, 1);
+
+ return ERROR_OK;
+}
+
+static int jlink_set_config(struct jlink_config *cfg)
+{
+ int result;
+ int size = sizeof(struct jlink_config);
+
+ jlink_simple_command(EMU_CMD_WRITE_CONFIG);
+
+ memcpy(usb_out_buffer, cfg, size);
+
+ result = jlink_usb_write(jlink_handle, size);
+ if (result != size)
+ {
+ LOG_ERROR("jlink_usb_write failed (requested=%d, result=%d)", 256, result);
+ return ERROR_FAIL;
+ }
+
+ return ERROR_OK;
+}
+
static int jlink_get_version_info(void)
{
int result;
int len;
- uint32_t jlink_caps, jlink_max_size;
+ uint32_t jlink_max_size;
/* query hardware version */
jlink_simple_command(EMU_CMD_VERSION);
}
jlink_caps = buf_get_u32(usb_in_buffer, 0, 32);
- LOG_INFO("JLink caps 0x%x", (unsigned)jlink_caps);
+ LOG_INFO("J-Link caps 0x%x", (unsigned)jlink_caps);
if (jlink_caps & (1 << EMU_CAP_GET_HW_VERSION))
{
uint32_t jlink_hw_version = buf_get_u32(usb_in_buffer, 0, 32);
uint32_t major_revision = (jlink_hw_version / 10000) % 100;
+ jlink_hw_type = (jlink_hw_version / 1000000) % 100;
if (major_revision >= 5)
jlink_hw_jtag_version = 3;
- LOG_INFO("JLink hw version %i", (int)jlink_hw_version);
+ LOG_INFO("J-Link hw version %i", (int)jlink_hw_version);
+
+ if (jlink_hw_type >= JLINK_HW_TYPE_MAX)
+ LOG_INFO("J-Link hw type uknown 0x%x", jlink_hw_type);
+ else
+ LOG_INFO("J-Link hw type %s", jlink_hw_type_str[jlink_hw_type]);
}
if (jlink_caps & (1 << EMU_CAP_GET_MAX_BLOCK_SIZE))
}
jlink_max_size = buf_get_u32(usb_in_buffer, 0, 32);
- LOG_INFO("JLink max mem block %i", (int)jlink_max_size);
+ LOG_INFO("J-Link max mem block %i", (int)jlink_max_size);
+ }
+
+ if (jlink_caps & (1 << EMU_CAP_READ_CONFIG))
+ {
+ if (jlink_get_config(&jlink_cfg) != ERROR_OK)
+ return ERROR_JTAG_DEVICE_ERROR;
+
+ jlink_config_dump(NULL, &jlink_cfg);
}
return ERROR_OK;
}
+COMMAND_HANDLER(jlink_pid_command)
+{
+ if (CMD_ARGC != 1)
+ {
+ LOG_ERROR("Need exactly one argument to jlink_pid");
+ return ERROR_FAIL;
+ }
+
+ pids[0] = strtoul(CMD_ARGV[0], NULL, 16);
+ pids[1] = 0;
+ vids[1] = 0;
+
+ return ERROR_OK;
+}
+
COMMAND_HANDLER(jlink_handle_jlink_info_command)
{
if (jlink_get_version_info() == ERROR_OK)
return ERROR_OK;
}
+COMMAND_HANDLER(jlink_handle_jlink_caps_command)
+{
+ jlink_caps_dump(CMD_CTX);
+
+ return ERROR_OK;
+}
+
COMMAND_HANDLER(jlink_handle_jlink_hw_jtag_command)
{
switch (CMD_ARGC) {
case 0:
- command_print(CMD_CTX, "jlink hw jtag %i", jlink_hw_jtag_version);
+ command_print(CMD_CTX, "J-Link hw jtag %i", jlink_hw_jtag_version);
break;
case 1: {
int request_version = atoi(CMD_ARGV[0]);
return ERROR_OK;
}
-static const struct command_registration jlink_command_handlers[] = {
+COMMAND_HANDLER(jlink_handle_jlink_kickstart_command)
+{
+ uint32_t kickstart;
+
+ if (CMD_ARGC < 1)
+ {
+ jlink_config_kickstart_dump(CMD_CTX, &jlink_cfg);
+ return ERROR_OK;
+ }
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], kickstart);
+
+ jlink_cfg.kickstart_power_on_jtag_pin_19 = kickstart;
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(jlink_handle_jlink_mac_address_command)
+{
+ uint8_t addr[6];
+ int i;
+ char *e;
+ const char *str;
+
+ if (CMD_ARGC < 1)
+ {
+ jlink_config_mac_address_dump(CMD_CTX, &jlink_cfg);
+ return ERROR_OK;
+ }
+
+ str = CMD_ARGV[0];
+
+ if ((strlen(str) != 17) || (str[2] != ':' || str[5] != ':' || str[8] != ':' ||
+ str[11] != ':' || str[14] != ':'))
+ {
+ command_print(CMD_CTX, "ethaddr miss format ff:ff:ff:ff:ff:ff");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ for (i = 5; i >= 0; i--)
+ {
+ addr[i] = strtoul(str, &e, 16);
+ str = e + 1;
+ }
+
+ if (!(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]))
+ {
+ command_print(CMD_CTX, "invalid it's zero mac_address");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if (!(0x01 & addr[0]))
+ {
+ command_print(CMD_CTX, "invalid it's a multicat mac_address");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ memcpy(jlink_cfg.mac_address, addr, sizeof(addr));
+
+ return ERROR_OK;
+}
+
+static int string_to_ip(const char *s, uint8_t *ip, int *pos)
+{
+ uint8_t lip[4];
+ char *e;
+ const char *s_save = s;
+ int i;
+
+ if (!s)
+ return -EINVAL;
+
+ for (i = 0; i < 4; i++) {
+ lip[i] = strtoul(s, &e, 10);
+
+ if (*e != '.' && i != 3)
+ return -EINVAL;
+
+ s = e + 1;
+ }
+
+ *pos = e - s_save;
+
+ memcpy(ip, lip, sizeof(lip));
+ return ERROR_OK;
+}
+
+static void cpy_ip(uint8_t *dst, uint8_t *src)
+{
+ int i, j;
+
+ for (i = 0, j = 3; i < 4; i++, j--)
+ dst[i] = src[j];
+}
+
+COMMAND_HANDLER(jlink_handle_jlink_ip_command)
+{
+ uint32_t ip_address;
+ uint32_t subnet_mask = 0;
+ int i, len;
+ int ret;
+ uint8_t subnet_bits = 24;
+
+ if (CMD_ARGC < 1)
+ {
+ jlink_config_ip_dump(CMD_CTX, &jlink_cfg);
+ return ERROR_OK;
+ }
+
+ ret = string_to_ip(CMD_ARGV[0], (uint8_t*)&ip_address, &i);
+ if (ret != ERROR_OK)
+ return ret;
+
+ len = strlen(CMD_ARGV[0]);
+
+ /* check for this format A.B.C.D/E */
+
+ if (i < len)
+ {
+ if (CMD_ARGV[0][i] != '/')
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ COMMAND_PARSE_NUMBER(u8, CMD_ARGV[0] + i + 1, subnet_bits);
+ }
+ else
+ {
+ if (CMD_ARGC > 1)
+ {
+ ret = string_to_ip(CMD_ARGV[1], (uint8_t*)&subnet_mask, &i);
+ if (ret != ERROR_OK)
+ return ret;
+ }
+ }
+
+ if (!subnet_mask)
+ subnet_mask = (uint32_t)(subnet_bits < 32 ?
+ ((1ULL << subnet_bits) -1) : 0xffffffff);
+
+ cpy_ip(jlink_cfg.ip_address, (uint8_t*)&ip_address);
+ cpy_ip(jlink_cfg.subnet_mask, (uint8_t*)&subnet_mask);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(jlink_handle_jlink_reset_command)
+{
+ memset(&jlink_cfg, 0xff, sizeof(jlink_cfg));
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(jlink_handle_jlink_save_command)
+{
+ if (!(jlink_caps & (1 << EMU_CAP_WRITE_CONFIG)))
+ {
+ command_print(CMD_CTX, "J-Link write emulator configuration not supported");
+ return ERROR_OK;
+ }
+
+ command_print(CMD_CTX, "The J-Link need to be unpluged and repluged ta have the config effective");
+ return jlink_set_config(&jlink_cfg);
+}
+
+COMMAND_HANDLER(jlink_handle_jlink_usb_address_command)
+{
+ uint32_t address;
+
+ if (CMD_ARGC < 1)
+ {
+ jlink_config_usb_address_dump(CMD_CTX, &jlink_cfg);
+ return ERROR_OK;
+ }
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address);
+
+ if (address > 0x3 && address != 0xff)
+ {
+ command_print(CMD_CTX, "USB Address must be between 0x00 and 0x03 or 0xff");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ jlink_cfg.usb_address = address;
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(jlink_handle_jlink_config_command)
+{
+ struct jlink_config cfg;
+ int ret = ERROR_OK;
+
+ if (CMD_ARGC == 0)
{
- .name = "jlink_info",
+ if (!(jlink_caps & (1 << EMU_CAP_READ_CONFIG)))
+ {
+ command_print(CMD_CTX, "J-Link read emulator configuration not supported");
+ goto exit;
+ }
+
+ ret = jlink_get_config(&cfg);
+
+ if ( ret != ERROR_OK)
+ command_print(CMD_CTX, "J-Link read emulator configuration failled");
+ else
+ jlink_config_dump(CMD_CTX, &jlink_cfg);
+ }
+
+exit:
+ return ret;
+}
+
+static const struct command_registration jlink_config_subcommand_handlers[] = {
+ {
+ .name = "kickstart",
+ .handler = &jlink_handle_jlink_kickstart_command,
+ .mode = COMMAND_EXEC,
+ .help = "set Kickstart power on JTAG-pin 19.",
+ .usage = "[val]",
+ },
+ {
+ .name = "mac_address",
+ .handler = &jlink_handle_jlink_mac_address_command,
+ .mode = COMMAND_EXEC,
+ .help = "set the MAC Address",
+ .usage = "[ff:ff:ff:ff:ff:ff]",
+ },
+ {
+ .name = "ip",
+ .handler = &jlink_handle_jlink_ip_command,
+ .mode = COMMAND_EXEC,
+ .help = "set the ip address of the J-Link Pro, "
+ "where A.B.C.D is the ip, "
+ "E the bit of the subnet mask, "
+ "F.G.H.I the subnet mask",
+ .usage = "[A.B.C.D[/E] [F.G.H.I]]",
+ },
+ {
+ .name = "reset",
+ .handler = &jlink_handle_jlink_reset_command,
+ .mode = COMMAND_EXEC,
+ .help = "reset the current config",
+ },
+ {
+ .name = "save",
+ .handler = &jlink_handle_jlink_save_command,
+ .mode = COMMAND_EXEC,
+ .help = "save the current config",
+ },
+ {
+ .name = "usb_address",
+ .handler = &jlink_handle_jlink_usb_address_command,
+ .mode = COMMAND_EXEC,
+ .help = "set the USB-Address, "
+ "This will change the product id",
+ .usage = "[0x00 to 0x03 or 0xff]",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration jlink_subcommand_handlers[] = {
+ {
+ .name = "caps",
+ .handler = &jlink_handle_jlink_caps_command,
+ .mode = COMMAND_EXEC,
+ .help = "show jlink capabilities",
+ },
+ {
+ .name = "info",
.handler = &jlink_handle_jlink_info_command,
.mode = COMMAND_EXEC,
.help = "show jlink info",
},
{
- .name = "jlink_hw_jtag",
+ .name = "hw_jtag",
.handler = &jlink_handle_jlink_hw_jtag_command,
.mode = COMMAND_EXEC,
.help = "access J-Link HW JTAG command version",
.usage = "[2|3]",
},
+ {
+ .name = "config",
+ .handler = &jlink_handle_jlink_config_command,
+ .mode = COMMAND_EXEC,
+ .help = "access J-Link configuration, "
+ "if no argument this will dump the config",
+ .chain = jlink_config_subcommand_handlers,
+ },
+ {
+ .name = "pid",
+ .handler = &jlink_pid_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set the pid of the interface we want to use",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration jlink_command_handlers[] = {
+ {
+ .name = "jlink",
+ .mode = COMMAND_ANY,
+ .help = "perform jlink management",
+ .chain = jlink_subcommand_handlers,
+ },
COMMAND_REGISTRATION_DONE
};
DEBUG_JTAG_IO("pending scan result, length = %d", length);
-#ifdef _DEBUG_USB_COMMS_
jlink_debug_buffer(buffer, DIV_ROUND_UP(length, 8));
-#endif
if (jtag_read_buffer(buffer, command) != ERROR_OK)
{
{
usb_init();
- const uint16_t vids[] = { VID, 0 };
- const uint16_t pids[] = { PID, 0 };
struct usb_dev_handle *dev;
if (jtag_usb_open(vids, pids, &dev) != ERROR_OK)
return NULL;
DEBUG_JTAG_IO("jlink_usb_write, out_length = %d, result = %d",
out_length, result);
-#ifdef _DEBUG_USB_COMMS_
jlink_debug_buffer(usb_out_buffer, out_length);
-#endif
return result;
}
DEBUG_JTAG_IO("jlink_usb_read, result = %d", result);
-#ifdef _DEBUG_USB_COMMS_
jlink_debug_buffer(usb_in_buffer, result);
-#endif
return result;
}
DEBUG_JTAG_IO("jlink_usb_read_result, result = %d", result);
-#ifdef _DEBUG_USB_COMMS_
jlink_debug_buffer(usb_emu_result_buffer, result);
-#endif
return result;
}
Code Review / openocd.git / blobdiff