Added the faux flash driver and target. Used for testing.
[openocd.git] / src / flash / str9xpec.c
index e679d42d5461cf0f8cd42009028b603d973c936a..33471e6b3a67c4d054701833d8d173f7e1636920 100644 (file)
@@ -101,7 +101,7 @@ static int str9xpec_register_commands(struct command_context_s *cmd_ctx)
 
 int str9xpec_set_instr(jtag_tap_t *tap, uint32_t new_instr, tap_state_t end_state)
 {
-       if (tap == NULL ){
+       if (tap == NULL{
                return ERROR_TARGET_INVALID;
        }
 
@@ -318,14 +318,14 @@ static int str9xpec_flash_bank_command(struct command_context_s *cmd_ctx, char *
        str9xpec_info = malloc(sizeof(str9xpec_flash_controller_t));
        bank->driver_priv = str9xpec_info;
 
-       /* find out jtag position of flash controller
-        * it is always after the arm966 core */
-
+       /* REVISIT verify that the jtag position of flash controller is
+        * right after *THIS* core, which must be a STR9xx core ...
+        */
        armv4_5 = bank->target->arch_info;
        arm7_9 = armv4_5->arch_info;
        jtag_info = &arm7_9->jtag_info;
 
-       str9xpec_info->tap = jtag_tap_by_position(jtag_info->tap->abs_chain_position - 1);
+       str9xpec_info->tap = bank->target->tap;
        str9xpec_info->isc_enable = 0;
 
        str9xpec_build_block_list(bank);
@@ -349,7 +349,7 @@ static int str9xpec_blank_check(struct flash_bank_s *bank, int first, int last)
        tap = str9xpec_info->tap;
 
        if (!str9xpec_info->isc_enable) {
-               str9xpec_isc_enable(bank );
+               str9xpec_isc_enable(bank);
        }
 
        if (!str9xpec_info->isc_enable) {
@@ -438,7 +438,7 @@ static int str9xpec_erase_area(struct flash_bank_s *bank, int first, int last)
        tap = str9xpec_info->tap;
 
        if (!str9xpec_info->isc_enable) {
-               str9xpec_isc_enable(bank );
+               str9xpec_isc_enable(bank);
        }
 
        if (!str9xpec_info->isc_enable) {
@@ -518,7 +518,7 @@ static int str9xpec_lock_device(struct flash_bank_s *bank)
        tap = str9xpec_info->tap;
 
        if (!str9xpec_info->isc_enable) {
-               str9xpec_isc_enable(bank );
+               str9xpec_isc_enable(bank);
        }
 
        if (!str9xpec_info->isc_enable) {
@@ -575,7 +575,7 @@ static int str9xpec_protect(struct flash_bank_s *bank, int set, int first, int l
        /* last bank: 0xFF signals a full device protect */
        if (last == 0xFF)
        {
-               if (set )
+               if (set)
                {
                        status = str9xpec_lock_device(bank);
                }
@@ -589,7 +589,7 @@ static int str9xpec_protect(struct flash_bank_s *bank, int set, int first, int l
        {
                for (i = first; i <= last; i++)
                {
-                       if (set )
+                       if (set)
                                buf_set_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1, 1);
                        else
                                buf_set_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1, 0);
@@ -671,11 +671,11 @@ static int str9xpec_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t o
                                check_address = sec_end;
                }
 
-               if ((offset >= sec_start) && (offset < sec_end)){
+               if ((offset >= sec_start) && (offset < sec_end)) {
                        first_sector = i;
                }
 
-               if ((offset + count >= sec_start) && (offset + count < sec_end)){
+               if ((offset + count >= sec_start) && (offset + count < sec_end)) {
                        last_sector = i;
                }
        }
@@ -845,7 +845,7 @@ static int str9xpec_erase_check(struct flash_bank_s *bank)
 
 static int str9xpec_info(struct flash_bank_s *bank, char *buf, int buf_size)
 {
-       snprintf(buf, buf_size, "str9xpec flash driver info" );
+       snprintf(buf, buf_size, "str9xpec flash driver info");
        return ERROR_OK;
 }
 
@@ -919,13 +919,13 @@ static int str9xpec_write_options(struct flash_bank_s *bank)
        tap = str9xpec_info->tap;
 
        /* erase config options first */
-       status = str9xpec_erase_area(bank, 0xFE, 0xFE );
+       status = str9xpec_erase_area(bank, 0xFE, 0xFE);
 
        if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
                return status;
 
        if (!str9xpec_info->isc_enable) {
-               str9xpec_isc_enable(bank );
+               str9xpec_isc_enable(bank);
        }
 
        if (!str9xpec_info->isc_enable) {
@@ -1254,7 +1254,8 @@ static int str9xpec_handle_flash_disable_turbo_command(struct command_context_s
                return ERROR_FAIL;
 
        /* exit turbo mode via RESET */
-       str9xpec_set_instr(tap, ISC_NOOP, TAP_RESET);
+       str9xpec_set_instr(tap, ISC_NOOP, TAP_IDLE);
+       jtag_add_tlr();
        jtag_execute_queue();
 
        /* restore previous scan chain */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)