David Brownell
[openocd.git] / src / flash / orion_nand.c
index dc9d78c53791fe500d7761afd9bc90a4da8333e6..94df17ba7210dc8ead1d84a9e9dc6e0621d21204 100644 (file)
 #include "config.h"
 #endif
 
-#include "nand.h"
+#include "arm_nandio.h"
 #include "armv4_5.h"
-#include "binarybuffer.h"
 
 
 typedef struct orion_nand_controller_s
 {
        struct target_s *target;
-       working_area_t *copy_area;
+
+       struct arm_nand_data    io;
 
        uint32_t                cmd;
        uint32_t                addr;
@@ -99,78 +99,14 @@ static int orion_nand_slow_block_write(struct nand_device_s *device, uint8_t *da
 static int orion_nand_fast_block_write(struct nand_device_s *device, uint8_t *data, int size)
 {
        orion_nand_controller_t *hw = device->controller_priv;
-       target_t *target = hw->target;
-       armv4_5_algorithm_t algo;
-       reg_param_t reg_params[3];
-       uint32_t target_buf;
        int retval;
 
-       static const uint32_t code[] = {
-               0xe4d13001,     /* ldrb r3, [r1], #1    */
-               0xe5c03000,     /* strb r3, [r0]        */
-               0xe2522001,     /* subs r2, r2, #1      */
-               0x1afffffb,     /* bne  0               */
-               0xeafffffe,     /* b    .               */
-       };
-       int code_size = sizeof(code);
-
-       if (!hw->copy_area) {
-               uint8_t code_buf[code_size];
-               int i;
-
-               /* make sure we have a working area */
-               if (target_alloc_working_area(target,
-                                             code_size + device->page_size,
-                                             &hw->copy_area) != ERROR_OK)
-               {
-                       return orion_nand_slow_block_write(device, data, size);
-               }
-
-               /* copy target instructions to target endianness */
-               for (i = 0; i < code_size/4; i++)
-                       target_buffer_set_u32(target, code_buf + i*4, code[i]);
-
-               /* write code to working area */
-                retval = target_write_memory(target,
-                                       hw->copy_area->address,
-                                       4, code_size/4, code_buf);
-               if (retval != ERROR_OK)
-                       return retval;
-       }
+       hw->io.chunk_size = device->page_size;
+
+       retval = arm_nandwrite(&hw->io, data, size);
+       if (retval == ERROR_NAND_NO_BUFFER)
+               retval = orion_nand_slow_block_write(device, data, size);
 
-       /* copy data to target's memory */
-       target_buf = hw->copy_area->address + code_size;
-       retval = target_bulk_write_memory(target, target_buf, size/4, data);
-       if (retval == ERROR_OK && size & 3) {
-               retval = target_write_memory(target,
-                                       target_buf + (size & ~3),
-                                       1, size & 3, data + (size & ~3));
-       }
-       if (retval != ERROR_OK)
-               return retval;
-
-       algo.common_magic = ARMV4_5_COMMON_MAGIC;
-       algo.core_mode = ARMV4_5_MODE_SVC;
-       algo.core_state = ARMV4_5_STATE_ARM;
-
-       init_reg_param(&reg_params[0], "r0", 32, PARAM_IN);
-       init_reg_param(&reg_params[1], "r1", 32, PARAM_IN);
-       init_reg_param(&reg_params[2], "r2", 32, PARAM_IN);
-
-       buf_set_u32(reg_params[0].value, 0, 32, hw->data);
-       buf_set_u32(reg_params[1].value, 0, 32, target_buf);
-       buf_set_u32(reg_params[2].value, 0, 32, size);
-
-       retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
-                                       hw->copy_area->address,
-                                       hw->copy_area->address + code_size - 4,
-                                       1000, &algo);
-       if (retval != ERROR_OK)
-               LOG_ERROR("error executing hosted NAND write");
-
-       destroy_reg_param(&reg_params[0]);
-       destroy_reg_param(&reg_params[1]);
-       destroy_reg_param(&reg_params[2]);
        return retval;
 }
 
@@ -224,6 +160,9 @@ int orion_nand_device_command(struct command_context_s *cmd_ctx, char *cmd,
        hw->cmd = base + (1 << cle);
        hw->addr = base + (1 << ale);
 
+       hw->io.target = hw->target;
+       hw->io.data = hw->data;
+
        return ERROR_OK;
 }
 

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)