flash: use proper format with uint32_t
[openocd.git] / src / flash / nor / xmc1xxx.c
index eda1823f9834fa9ea855373ecc7379c80817593e..757dd952f5910d863a0d716cf09c3e4072c86e60 100644 (file)
@@ -253,7 +253,7 @@ static int xmc1xxx_write(struct flash_bank *bank, const uint8_t *buffer,
 #include "../../../contrib/loaders/flash/xmc1xxx/write.inc"
        };
 
-       LOG_DEBUG("Infineon XMC1000 write at 0x%08" PRIx32 " (%" PRId32 " bytes)",
+       LOG_DEBUG("Infineon XMC1000 write at 0x%08" PRIx32 " (%" PRIu32 " bytes)",
                offset, byte_count);
 
        if (offset & (NVM_BLOCK_SIZE - 1)) {
@@ -262,7 +262,7 @@ static int xmc1xxx_write(struct flash_bank *bank, const uint8_t *buffer,
                return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
        }
        if (byte_count & (NVM_BLOCK_SIZE - 1)) {
-               LOG_WARNING("length %" PRId32 " is not block aligned, rounding up",
+               LOG_WARNING("length %" PRIu32 " is not block aligned, rounding up",
                        byte_count);
        }
 
@@ -306,7 +306,7 @@ static int xmc1xxx_write(struct flash_bank *bank, const uint8_t *buffer,
                uint32_t blocks = MIN(block_count, data_workarea->size / NVM_BLOCK_SIZE);
                uint32_t addr = bank->base + offset;
 
-               LOG_DEBUG("copying %" PRId32 " bytes to SRAM " TARGET_ADDR_FMT,
+               LOG_DEBUG("copying %" PRIu32 " bytes to SRAM " TARGET_ADDR_FMT,
                        MIN(blocks * NVM_BLOCK_SIZE, byte_count),
                        data_workarea->address);
 
@@ -329,7 +329,7 @@ static int xmc1xxx_write(struct flash_bank *bank, const uint8_t *buffer,
                        }
                }
 
-               LOG_DEBUG("writing 0x%08" PRIx32 "-0x%08" PRIx32 " (%" PRId32 "x)",
+               LOG_DEBUG("writing 0x%08" PRIx32 "-0x%08" PRIx32 " (%" PRIu32 "x)",
                        addr, addr + blocks * NVM_BLOCK_SIZE - 1, blocks);
 
                retval = xmc1xxx_nvm_check_idle(target);
@@ -429,7 +429,7 @@ static int xmc1xxx_get_info_command(struct flash_bank *bank, char *buf, int buf_
        }
        LOG_DEBUG("ID[7] = %08" PRIX32, chipid[7]);
 
-       snprintf(buf, buf_size, "XMC%" PRIx32 "00 %X flash %uKB ROM %uKB SRAM %uKB",
+       snprintf(buf, buf_size, "XMC%" PRIx32 "00 %" PRIX32 " flash %" PRIu32 "KB ROM %" PRIu32 "KB SRAM %" PRIu32 "KB",
                        (chipid[0] >> 12) & 0xff,
                        0xAA + (chipid[7] >> 28) - 1,
                        (((chipid[6] >> 12) & 0x3f) - 1) * 4,

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)