static bool allow_fcf_writes;
static uint8_t fcf_fopt = 0xff;
-static bool fcf_fopt_configured;
static bool create_banks;
uint32_t offset, uint32_t wcount)
{
struct target *target = bank->target;
- uint32_t buffer_size = 2048; /* Default minimum value */
+ uint32_t buffer_size;
struct working_area *write_algorithm;
struct working_area *source;
struct kinetis_flash_bank *k_bank = bank->driver_priv;
int retval;
uint8_t fstat;
- /* Increase buffer_size if needed */
- if (buffer_size < (target->working_area_size/2))
- buffer_size = (target->working_area_size/2);
-
/* allocate working area with flash programming code */
if (target_alloc_working_area(target, sizeof(kinetis_flash_write_code),
&write_algorithm) != ERROR_OK) {
if (retval != ERROR_OK)
return retval;
- /* memory buffer */
- while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK) {
- buffer_size /= 4;
- if (buffer_size <= 256) {
- /* free working area, write algorithm already allocated */
- target_free_working_area(target, write_algorithm);
+ /* memory buffer, size *must* be multiple of word */
+ buffer_size = target_get_working_area_avail(target) & ~(sizeof(uint32_t) - 1);
+ if (buffer_size < 256) {
+ LOG_WARNING("large enough working area not available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ } else if (buffer_size > 16384) {
+ /* probably won't benefit from more than 16k ... */
+ buffer_size = 16384;
+ }
- LOG_WARNING("No large enough working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
+ if (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK) {
+ LOG_ERROR("allocating working area failed");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
return ERROR_FLASH_OPERATION_FAILED;
}
- bank->sectors[i].is_erased = 1;
-
if (k_bank->prog_base == 0
&& bank->sectors[i].offset <= FCF_ADDRESS
&& bank->sectors[i].offset + bank->sectors[i].size > FCF_ADDRESS + FCF_SIZE) {
result = kinetis_write_inner(bank, fcf_buffer, FCF_ADDRESS, FCF_SIZE);
if (result != ERROR_OK)
LOG_WARNING("Flash Configuration Field write failed");
- bank->sectors[i].is_erased = 0;
+ else
+ LOG_DEBUG("Generated FCF written");
}
}
}
int result;
bool set_fcf = false;
bool fcf_in_data_valid = false;
+ bool fcf_differs = false;
int sect = 0;
struct kinetis_flash_bank *k_bank = bank->driver_priv;
struct kinetis_chip *k_chip = k_bank->k_chip;
&& offset + count >= FCF_ADDRESS + FCF_SIZE;
if (fcf_in_data_valid) {
memcpy(fcf_in_data, buffer + FCF_ADDRESS - offset, FCF_SIZE);
- if (memcmp(fcf_in_data + FCF_FPROT, fcf_buffer, 4)) {
- fcf_in_data_valid = false;
- LOG_INFO("Flash protection requested in programmed file differs from current setting.");
+ if (memcmp(fcf_in_data, fcf_buffer, 8)) {
+ fcf_differs = true;
+ LOG_INFO("Setting of backdoor key is not supported in mode 'kinetis fcf_source protection'.");
+ }
+ if (memcmp(fcf_in_data + FCF_FPROT, fcf_buffer + FCF_FPROT, 4)) {
+ fcf_differs = true;
+ LOG_INFO("Flash protection requested in the programmed file differs from current setting.");
}
if (fcf_in_data[FCF_FDPROT] != fcf_buffer[FCF_FDPROT]) {
- fcf_in_data_valid = false;
- LOG_INFO("Data flash protection requested in programmed file differs from current setting.");
+ fcf_differs = true;
+ LOG_INFO("Data flash protection requested in the programmed file differs from current setting.");
}
if ((fcf_in_data[FCF_FSEC] & 3) != 2) {
fcf_in_data_valid = false;
- LOG_INFO("Device security requested in programmed file!");
- } else if (k_chip->flash_support & FS_ECC
- && fcf_in_data[FCF_FSEC] != fcf_buffer[FCF_FSEC]) {
- fcf_in_data_valid = false;
+ LOG_INFO("Device security requested in the programmed file! Write denied.");
+ } else if (fcf_in_data[FCF_FSEC] != fcf_buffer[FCF_FSEC]) {
+ fcf_differs = true;
LOG_INFO("Strange unsecure mode 0x%02" PRIx8
- "requested in programmed file!",
- fcf_in_data[FCF_FSEC]);
+ " requested in the programmed file, set FSEC = 0x%02" PRIx8
+ " in the startup code!",
+ fcf_in_data[FCF_FSEC], fcf_buffer[FCF_FSEC]);
}
- if ((k_chip->flash_support & FS_ECC || fcf_fopt_configured)
- && fcf_in_data[FCF_FOPT] != fcf_fopt) {
- fcf_in_data_valid = false;
- LOG_INFO("FOPT requested in programmed file differs from current setting.");
+ if (fcf_in_data[FCF_FOPT] != fcf_buffer[FCF_FOPT]) {
+ fcf_differs = true;
+ LOG_INFO("FOPT requested in the programmed file differs from current setting, set 'kinetis fopt 0x%02"
+ PRIx8 "'.", fcf_in_data[FCF_FOPT]);
+ }
+
+ /* If the device has ECC flash, then we cannot re-program FCF */
+ if (fcf_differs) {
+ if (k_chip->flash_support & FS_ECC) {
+ fcf_in_data_valid = false;
+ LOG_INFO("Cannot re-program FCF. Expect verify errors at FCF (0x400-0x40f).");
+ } else {
+ LOG_INFO("Trying to re-program FCF.");
+ if (!(k_chip->flash_support & FS_PROGRAM_LONGWORD))
+ LOG_INFO("Flash re-programming may fail on this device!");
+ }
}
- if (!fcf_in_data_valid)
- LOG_INFO("Expect verify errors at FCF (0x408-0x40f).");
}
}
if (CMD_ARGC == 1) {
fcf_fopt = (uint8_t)strtoul(CMD_ARGV[0], NULL, 0);
- fcf_fopt_configured = true;
} else {
command_print(CMD, "FCF_FOPT 0x%02" PRIx8, fcf_fopt);
}