flash/nor/nrf5: unify size of HWID

[openocd.git] / src / flash / nor / at91sam7.c

diff --git a/src/flash/nor/at91sam7.c b/src/flash/nor/at91sam7.c
index 7dfdf0d29b60fafc8e842b65200896420374dde7..3d8fee1afe0ab7a591aad667fd3c29b163844d73 100644 (file)
--- a/src/flash/nor/at91sam7.c
+++ b/src/flash/nor/at91sam7.c
@@ -254,7 +254,7 @@ static void at91sam7_read_clock_info(struct flash_bank *bank)
                at91sam7_info->mck_freq = tmp;
 }
 
-/* Setup the timimg registers for nvbits or normal flash */
+/* Setup the timing registers for nvbits or normal flash */
 static void at91sam7_set_flash_mode(struct flash_bank *bank, int mode)
 {
        uint32_t fmr, fmcn = 0, fws = 0;
@@ -377,7 +377,7 @@ static int at91sam7_read_part_info(struct flash_bank *bank)
                        /* re-calculate master clock frequency */
                        at91sam7_read_clock_info(t_bank);
 
-                       /* no timming */
+                       /* no timing */
                        at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
 
                        /* check protect state */
@@ -415,7 +415,7 @@ static int at91sam7_read_part_info(struct flash_bank *bank)
                        /* calculate master clock frequency */
                        at91sam7_read_clock_info(t_bank);
 
-                       /* no timming */
+                       /* no timing */
                        at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
 
                        /* check protect state */
@@ -623,7 +623,7 @@ static int at91sam7_read_part_info(struct flash_bank *bank)
                /* calculate master clock frequency */
                at91sam7_read_clock_info(t_bank);
 
-               /* no timming */
+               /* no timing */
                at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
 
                /* check protect state */
@@ -954,7 +954,7 @@ static int at91sam7_write(struct flash_bank *bank, const uint8_t *buffer, uint32
                /* Send Write Page command to Flash Controller */
                if (at91sam7_flash_command(bank, WP, pagen) != ERROR_OK)
                        return ERROR_FLASH_OPERATION_FAILED;
-               LOG_DEBUG("Write flash bank:%u page number:%" PRIi32 "", bank->bank_number, pagen);
+               LOG_DEBUG("Write flash bank:%u page number:%" PRIu32, bank->bank_number, pagen);
        }
 
        return ERROR_OK;