Fix make maintainer-clean for out-of-tree builds.
[openocd.git] / src / flash / mflash.c
index 08aad9f1d2f9c5ddc7d89c5a9a8239369774488c..2587b6b5f931f42fcd49ccaf68457a5b1912f37a 100644 (file)
 #include "config.h"
 #endif
 
-#include <ctype.h>
-#include <string.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <errno.h>
-#include <inttypes.h>
-
-#include "command.h"
-#include "log.h"
-#include "target.h"
+#include "mflash.h"
 #include "time_support.h"
 #include "fileio.h"
-#include "mflash.h"
+#include "log.h"
+
 
 static int s3c2440_set_gpio_to_output (mflash_gpio_num_t gpio);
 static int s3c2440_set_gpio_output_val (mflash_gpio_num_t gpio, u8 val);
@@ -201,28 +191,18 @@ static int s3c2440_set_gpio_output_val (mflash_gpio_num_t gpio, u8 val)
        return ret;
 }
 
-static int mflash_rst(u8 level)
+static int mg_hdrst(u8 level)
 {
        return mflash_bank->gpio_drv->set_gpio_output_val(mflash_bank->rst_pin, level);
 }
 
-static int mflash_init_gpio (void)
+static int mg_init_gpio (void)
 {
        mflash_gpio_drv_t *gpio_drv = mflash_bank->gpio_drv;
 
        gpio_drv->set_gpio_to_output(mflash_bank->rst_pin);
        gpio_drv->set_gpio_output_val(mflash_bank->rst_pin, 1);
 
-       if (mflash_bank->wp_pin.num != -1) {
-               gpio_drv->set_gpio_to_output(mflash_bank->wp_pin);
-               gpio_drv->set_gpio_output_val(mflash_bank->wp_pin, 1);
-       }
-
-       if (mflash_bank->dpd_pin.num != -1) {
-               gpio_drv->set_gpio_to_output(mflash_bank->dpd_pin);
-               gpio_drv->set_gpio_output_val(mflash_bank->dpd_pin, 1);
-       }
-
        return ERROR_OK;
 }
 
@@ -365,7 +345,7 @@ static int mg_dsk_drv_info(void)
        if (! mflash_bank->drv_info)
                mflash_bank->drv_info = malloc(sizeof(mg_drv_info_t));
 
-       target->type->read_memory(target, mg_buff, 2, sizeof(mg_io_type_drv_info) >> 1,
+       target_read_memory(target, mg_buff, 2, sizeof(mg_io_type_drv_info) >> 1,
                        (u8 *)&mflash_bank->drv_info->drv_id);
 
        mflash_bank->drv_info->tot_sects = (u32)(mflash_bank->drv_info->drv_id.total_user_addressable_sectors_hi << 16)
@@ -376,20 +356,16 @@ static int mg_dsk_drv_info(void)
        return ERROR_OK;
 }
 
-static int mg_mflash_probe(void)
+static int mg_mflash_rst(void)
 {
-       mflash_bank->proved = 0;
-
-       mflash_init_gpio();
+       mg_init_gpio();
 
-       LOG_INFO("reset mflash");
-
-       mflash_rst(0);
+       mg_hdrst(0);
 
        if (mg_dsk_wait(mg_io_wait_bsy, MG_OEM_DISK_WAIT_TIME_LONG) != ERROR_OK)
                return ERROR_FAIL;
 
-       mflash_rst(1);
+       mg_hdrst(1);
 
        if (mg_dsk_wait(mg_io_wait_not_bsy, MG_OEM_DISK_WAIT_TIME_LONG) != ERROR_OK)
                return ERROR_FAIL;
@@ -404,15 +380,23 @@ static int mg_mflash_probe(void)
        if (mg_dsk_wait(mg_io_wait_not_bsy, MG_OEM_DISK_WAIT_TIME_LONG) != ERROR_OK)
                return ERROR_FAIL;
 
-       if (mg_dsk_drv_info() != ERROR_OK)
+       LOG_INFO("mflash: reset ok");
+
+       return ERROR_OK;
+}
+
+static int mg_mflash_probe(void)
+{
+       if (mg_mflash_rst() != ERROR_OK)
                return ERROR_FAIL;
 
-       mflash_bank->proved = 1;
+       if (mg_dsk_drv_info() != ERROR_OK)
+               return ERROR_FAIL;
 
        return ERROR_OK;
 }
 
-static int mflash_probe_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+static int mg_probe_cmd(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 {
        int ret;
 
@@ -444,7 +428,7 @@ static int mg_mflash_do_read_sects(void *buff, u32 sect_num, u32 sect_cnt)
        for (i = 0; i < sect_cnt; i++) {
                mg_dsk_wait(mg_io_wait_drq, MG_OEM_DISK_WAIT_TIME_NORMAL);
 
-               target->type->read_memory(target, address, 2, MG_MFLASH_SECTOR_SIZE / 2, buff_ptr);
+               target_read_memory(target, address, 2, MG_MFLASH_SECTOR_SIZE / 2, buff_ptr);
                buff_ptr += MG_MFLASH_SECTOR_SIZE;
 
                target_write_u8(target, mflash_bank->base + MG_REG_OFFSET + MG_REG_COMMAND, mg_io_cmd_confirm_read);
@@ -489,7 +473,8 @@ static int mg_mflash_read_sects(void *buff, u32 sect_num, u32 sect_cnt)
        return ERROR_OK;
 }
 
-static int mg_mflash_do_write_sects(void *buff, u32 sect_num, u32 sect_cnt)
+static int mg_mflash_do_write_sects(void *buff, u32 sect_num, u32 sect_cnt,
+               mg_io_type_cmd cmd)
 {
        u32 i, address;
        int ret;
@@ -497,10 +482,8 @@ static int mg_mflash_do_write_sects(void *buff, u32 sect_num, u32 sect_cnt)
        u8 *buff_ptr = buff;
        duration_t duration;
 
-       if ( mg_dsk_io_cmd(sect_num, sect_cnt, mg_io_cmd_write) != ERROR_OK ) {
-               LOG_ERROR("mg_io_cmd_write fail");
+       if ( mg_dsk_io_cmd(sect_num, sect_cnt, cmd) != ERROR_OK )
                return ERROR_FAIL;
-       }
 
        address = mflash_bank->base + MG_BUFFER_OFFSET;
 
@@ -511,7 +494,7 @@ static int mg_mflash_do_write_sects(void *buff, u32 sect_num, u32 sect_cnt)
                if (ret != ERROR_OK)
                        LOG_ERROR("mg_io_wait_drq time out");
 
-               ret = target->type->write_memory(target, address, 2, MG_MFLASH_SECTOR_SIZE / 2, buff_ptr);
+               ret = target_write_memory(target, address, 2, MG_MFLASH_SECTOR_SIZE / 2, buff_ptr);
                if (ret != ERROR_OK)
                        LOG_ERROR("mem write error");
                buff_ptr += MG_MFLASH_SECTOR_SIZE;
@@ -530,7 +513,10 @@ static int mg_mflash_do_write_sects(void *buff, u32 sect_num, u32 sect_cnt)
                }
        }
 
-       ret = mg_dsk_wait(mg_io_wait_rdy, MG_OEM_DISK_WAIT_TIME_NORMAL);
+       if (cmd == mg_io_cmd_write)
+               ret = mg_dsk_wait(mg_io_wait_rdy, MG_OEM_DISK_WAIT_TIME_NORMAL);
+       else
+               ret = mg_dsk_wait(mg_io_wait_rdy, MG_OEM_DISK_WAIT_TIME_LONG);
 
        return ret;
 }
@@ -546,7 +532,7 @@ static int mg_mflash_write_sects(void *buff, u32 sect_num, u32 sect_cnt)
        for (i = 0; i < quotient; i++) {
                LOG_DEBUG("sect num : %u buff : %0lx", sect_num, 
                        (unsigned long)buff_ptr);
-               mg_mflash_do_write_sects(buff_ptr, sect_num, 256);
+               mg_mflash_do_write_sects(buff_ptr, sect_num, 256, mg_io_cmd_write);
                sect_num += 256;
                buff_ptr += 256 * MG_MFLASH_SECTOR_SIZE;
        }
@@ -554,7 +540,7 @@ static int mg_mflash_write_sects(void *buff, u32 sect_num, u32 sect_cnt)
        if (residue) {
                LOG_DEBUG("sect num : %u buff : %0lx", sect_num, 
                        (unsigned long)buff_ptr);
-               mg_mflash_do_write_sects(buff_ptr, sect_num, residue);
+               mg_mflash_do_write_sects(buff_ptr, sect_num, residue, mg_io_cmd_write);
        }
 
        return ERROR_OK;
@@ -682,15 +668,13 @@ static int mg_mflash_write(u32 addr, u8 *buff, u32 len)
        return ERROR_OK;
 }
 
-static int mflash_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+static int mg_write_cmd(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 {
-       u32 address, buf_cnt;
+       u32 address, buf_cnt, cnt, res, i;
        u8 *buffer;
-       /* TODO : multi-bank support, large file support */
        fileio_t fileio;
        duration_t duration;
        char *duration_text;
-       int ret;
 
        if (argc != 3) {
                return ERROR_COMMAND_SYNTAX_ERROR;
@@ -698,26 +682,36 @@ static int mflash_write_command(struct command_context_s *cmd_ctx, char *cmd, ch
 
        address = strtoul(args[2], NULL, 0);
 
-       if (! mflash_bank->proved ) {
-               mg_mflash_probe();
-       }
-
        if (fileio_open(&fileio, args[1], FILEIO_READ, FILEIO_BINARY) != ERROR_OK) {
                return ERROR_FAIL;
        }
 
-       buffer = malloc(fileio.size);
-
-       if (fileio_read(&fileio, fileio.size, buffer, &buf_cnt) != ERROR_OK)
-       {
-               free(buffer);
+       buffer = malloc(MG_FILEIO_CHUNK);
+       if (!buffer) {
                fileio_close(&fileio);
                return ERROR_FAIL;
        }
 
+       cnt = fileio.size / MG_FILEIO_CHUNK;
+       res = fileio.size % MG_FILEIO_CHUNK;
+
        duration_start_measure(&duration);
 
-       ret = mg_mflash_write(address, buffer, (u32)fileio.size);
+       for (i = 0; i < cnt; i++) {
+               if (fileio_read(&fileio, MG_FILEIO_CHUNK, buffer, &buf_cnt) !=
+                               ERROR_OK)
+                       goto mg_write_cmd_err;
+               if (mg_mflash_write(address, buffer, MG_FILEIO_CHUNK) != ERROR_OK)
+                       goto mg_write_cmd_err;
+               address += MG_FILEIO_CHUNK;
+       }
+       if (res) {
+               if (fileio_read(&fileio, res, buffer, &buf_cnt) != ERROR_OK)
+                       goto mg_write_cmd_err;                  
+               if (mg_mflash_write(address, buffer, res) != ERROR_OK)
+                       goto mg_write_cmd_err;
+       }
 
        duration_stop_measure(&duration, &duration_text);
 
@@ -726,19 +720,24 @@ static int mflash_write_command(struct command_context_s *cmd_ctx, char *cmd, ch
                (float)fileio.size / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
 
        free(duration_text);
-
-       fileio_close(&fileio);
-
        free(buffer);
+       fileio_close(&fileio);
 
        return ERROR_OK;
+
+mg_write_cmd_err:
+       duration_stop_measure(&duration, &duration_text);
+       free(duration_text);
+       free(buffer);
+       fileio_close(&fileio);
+
+       return ERROR_FAIL;
 }
 
-static int mflash_dump_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+static int mg_dump_cmd(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 {
-       u32 address, size_written, size;
+       u32 address, size_written, size, cnt, res, i;
        u8 *buffer;
-       /* TODO : multi-bank support */
        fileio_t fileio;
        duration_t duration;
        char *duration_text;
@@ -750,33 +749,481 @@ static int mflash_dump_command(struct command_context_s *cmd_ctx, char *cmd, cha
        address = strtoul(args[2], NULL, 0);
        size = strtoul(args[3], NULL, 0);
 
-       if (! mflash_bank->proved ) {
-                       mg_mflash_probe();
-       }
-
        if (fileio_open(&fileio, args[1], FILEIO_WRITE, FILEIO_BINARY) != ERROR_OK) {
                return ERROR_FAIL;
        }
+       buffer = malloc(MG_FILEIO_CHUNK);
+       if (!buffer) {
+               fileio_close(&fileio);
+               return ERROR_FAIL;
+       }
 
-       buffer = malloc(size);
-
+       cnt = size / MG_FILEIO_CHUNK;
+       res = size % MG_FILEIO_CHUNK;
        duration_start_measure(&duration);
 
-       mg_mflash_read(address, buffer, size);
+       for (i = 0; i < cnt; i++) {
+               if (mg_mflash_read(address, buffer, MG_FILEIO_CHUNK) != ERROR_OK)
+                       goto mg_dump_cmd_err;
+               if (fileio_write(&fileio, MG_FILEIO_CHUNK, buffer, &size_written)
+                               != ERROR_OK)
+                       goto mg_dump_cmd_err;
+               address += MG_FILEIO_CHUNK;
+       }
+       if (res) {
+               if (mg_mflash_read(address, buffer, res) != ERROR_OK)
+                       goto mg_dump_cmd_err;
+               if (fileio_write(&fileio, res, buffer, &size_written) != ERROR_OK)
+                       goto mg_dump_cmd_err;
+       }
 
        duration_stop_measure(&duration, &duration_text);
 
-       fileio_write(&fileio, size, buffer, &size_written);
-
        command_print(cmd_ctx, "dump image (address 0x%8.8x size %u) to file %s in %s (%f kB/s)",
                                address, size, args[1], duration_text,
                                (float)size / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
 
        free(duration_text);
+       free(buffer);
+       fileio_close(&fileio);
 
+       return ERROR_OK;
+
+mg_dump_cmd_err:
+       duration_stop_measure(&duration, &duration_text);
+       free(duration_text);
+       free(buffer);
        fileio_close(&fileio);
+       return ERROR_FAIL;      
+}
 
-       free(buffer);
+static int mg_set_feature(mg_feature_id feature, mg_feature_val config)
+{
+       target_t *target = mflash_bank->target;
+       u32 mg_task_reg = mflash_bank->base + MG_REG_OFFSET;
+
+       if (mg_dsk_wait(mg_io_wait_rdy_noerr, MG_OEM_DISK_WAIT_TIME_NORMAL)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       target_write_u8(target, mg_task_reg + MG_REG_FEATURE, feature);
+       target_write_u8(target, mg_task_reg + MG_REG_SECT_CNT, config);
+       target_write_u8(target, mg_task_reg + MG_REG_COMMAND,
+                       mg_io_cmd_set_feature);
+
+       return ERROR_OK;
+}
+
+static int mg_is_valid_pll(double XIN, int N, double CLK_OUT, int NO)
+{
+       double v1 = XIN / N;
+       double v2 = CLK_OUT * NO;
+
+       if (v1 <1000000 || v1 > 15000000 || v2 < 100000000 || v2 > 500000000)
+               return ERROR_FAIL;
+
+       return ERROR_OK;
+}
+
+static int mg_pll_get_M(unsigned short feedback_div)
+{
+       int i, M;
+
+       for (i = 1, M=0; i < 512; i <<= 1, feedback_div >>= 1)
+               M += (feedback_div & 1) * i;
+
+       return M + 2;
+}
+
+static int mg_pll_get_N(unsigned char input_div)
+{
+       int i, N;
+
+       for (i = 1, N = 0; i < 32; i <<= 1, input_div >>= 1)
+               N += (input_div & 1) * i;
+
+       return N + 2;
+}
+
+static int mg_pll_get_NO(unsigned char  output_div)
+{
+       int i, NO;
+
+       for (i = 0, NO = 1; i < 2; ++i, output_div >>= 1)
+               if(output_div & 1)
+                       NO = NO << 1;
+
+       return NO;
+}
+
+static double mg_do_calc_pll(double XIN, mg_pll_t * p_pll_val, int is_approximate)
+{
+       unsigned short i;
+       unsigned char  j, k;
+       int            M, N, NO;
+       double CLK_OUT;
+       double DIV = 1;
+       double ROUND = 0;
+
+       if (is_approximate) {
+               DIV   = 1000000;
+               ROUND = 500000;
+       }
+
+       for (i = 0; i < MG_PLL_MAX_FEEDBACKDIV_VAL ; ++i) {
+               M  = mg_pll_get_M(i);
+
+               for (j = 0; j < MG_PLL_MAX_INPUTDIV_VAL ; ++j) {
+                       N  = mg_pll_get_N(j);
+
+                       for (k = 0; k < MG_PLL_MAX_OUTPUTDIV_VAL ; ++k) {
+                               NO = mg_pll_get_NO(k);
+
+                               CLK_OUT = XIN * ((double)M / N) / NO;
+
+                               if ((int)((CLK_OUT+ROUND) / DIV)
+                                               == (int)(MG_PLL_CLK_OUT / DIV)) {
+                                       if (mg_is_valid_pll(XIN, N, CLK_OUT, NO) == ERROR_OK)
+                                       {
+                                               p_pll_val->lock_cyc = (int)(XIN * MG_PLL_STD_LOCKCYCLE / MG_PLL_STD_INPUTCLK);
+                                               p_pll_val->feedback_div = i;
+                                               p_pll_val->input_div = j;
+                                               p_pll_val->output_div = k;
+
+                                               return CLK_OUT;
+                                       }
+                               }
+                       }
+               }
+       }
+
+       return 0;
+}
+
+static double mg_calc_pll(double XIN, mg_pll_t *p_pll_val)
+{
+       double CLK_OUT;
+
+       CLK_OUT = mg_do_calc_pll(XIN, p_pll_val, 0);
+
+       if (!CLK_OUT)
+               return mg_do_calc_pll(XIN, p_pll_val, 1);
+       else
+               return CLK_OUT;
+}
+
+static int mg_verify_interface(void)
+{
+       u16 buff[MG_MFLASH_SECTOR_SIZE >> 1];
+       u16 i, j;
+       u32 address = mflash_bank->base + MG_BUFFER_OFFSET;
+       target_t *target = mflash_bank->target;
+
+       for (j = 0; j < 10; j++) {
+               for (i = 0; i < MG_MFLASH_SECTOR_SIZE >> 1; i++)
+                       buff[i] = i;
+
+               target_write_memory(target, address, 2,
+                               MG_MFLASH_SECTOR_SIZE / 2, (u8 *)buff);
+
+               memset(buff, 0xff, MG_MFLASH_SECTOR_SIZE);
+
+               target_read_memory(target, address, 2,
+                               MG_MFLASH_SECTOR_SIZE / 2, (u8 *)buff);
+
+               for (i = 0; i < MG_MFLASH_SECTOR_SIZE >> 1; i++) {
+                       if (buff[i] != i) {
+                               LOG_ERROR("mflash: verify interface fail");
+                               return ERROR_FAIL;
+                       }
+               }
+       }
+
+       LOG_INFO("mflash: verify interface ok");
+       return ERROR_OK;
+}
+
+static const char g_strSEG_SerialNum[20] = {
+       'G','m','n','i','-','e','e','S','g','a','e','l',
+       0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20
+};
+
+static const char g_strSEG_FWRev[8] = {
+       'F','X','L','T','2','v','0','.'
+};
+
+static const char g_strSEG_ModelNum[40] = {
+       'F','X','A','L','H','S','2',0x20,'0','0','s','7',
+       0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,
+       0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,
+       0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20
+};
+
+static void mg_gen_ataid(mg_io_type_drv_info *pSegIdDrvInfo)
+{
+       /* b15 is ATA device(0) , b7 is Removable Media Device */
+       pSegIdDrvInfo->general_configuration            = 0x045A;
+       /* 128MB :   Cylinder=> 977 , Heads=> 8 ,  Sectors=> 32
+        * 256MB :   Cylinder=> 980 , Heads=> 16 , Sectors=> 32
+        * 384MB :   Cylinder=> 745 , Heads=> 16 , Sectors=> 63
+        */
+       pSegIdDrvInfo->number_of_cylinders              = 0x02E9;
+       pSegIdDrvInfo->reserved1                        = 0x0;
+       pSegIdDrvInfo->number_of_heads                  = 0x10;
+       pSegIdDrvInfo->unformatted_bytes_per_track      = 0x0;
+       pSegIdDrvInfo->unformatted_bytes_per_sector     = 0x0;
+       pSegIdDrvInfo->sectors_per_track                = 0x3F;
+       pSegIdDrvInfo->vendor_unique1[0]                = 0x000B;
+       pSegIdDrvInfo->vendor_unique1[1]                = 0x7570;
+       pSegIdDrvInfo->vendor_unique1[2]                = 0x8888;
+
+       memcpy(pSegIdDrvInfo->serial_number, (void *)g_strSEG_SerialNum,20);
+       /* 0x2 : dual buffer */
+       pSegIdDrvInfo->buffer_type                      = 0x2;
+       /* buffer size : 2KB */
+       pSegIdDrvInfo->buffer_sector_size               = 0x800;
+       pSegIdDrvInfo->number_of_ecc_bytes              = 0;
+
+       memcpy(pSegIdDrvInfo->firmware_revision, (void *)g_strSEG_FWRev,8);
+
+       memcpy(pSegIdDrvInfo->model_number, (void *)g_strSEG_ModelNum,40);
+
+       pSegIdDrvInfo->maximum_block_transfer           = 0x4;
+       pSegIdDrvInfo->vendor_unique2                   = 0x0;
+       pSegIdDrvInfo->dword_io                         = 0x00;
+       /* b11 : IORDY support(PIO Mode 4), b10 : Disable/Enbale IORDY
+        * b9  : LBA support, b8 : DMA mode support
+        */
+       pSegIdDrvInfo->capabilities                     = 0x1 << 9;
+
+       pSegIdDrvInfo->reserved2                        = 0x4000;
+       pSegIdDrvInfo->vendor_unique3                   = 0x00;
+       /* PIOMode-2 support */
+       pSegIdDrvInfo->pio_cycle_timing_mode            = 0x02;
+       pSegIdDrvInfo->vendor_unique4                   = 0x00;
+       /* MultiWord-2 support */
+       pSegIdDrvInfo->dma_cycle_timing_mode            = 0x00;
+       /* b1 : word64~70 is valid
+        * b0 : word54~58 are valid and reflect the current numofcyls,heads,sectors
+        * b2 : If device supports Ultra DMA , set to one to vaildate word88
+        */
+       pSegIdDrvInfo->translation_fields_valid         = (0x1 << 1) | (0x1 << 0);
+       pSegIdDrvInfo->number_of_current_cylinders      = 0x02E9;
+       pSegIdDrvInfo->number_of_current_heads          = 0x10;
+       pSegIdDrvInfo->current_sectors_per_track        = 0x3F;
+       pSegIdDrvInfo->current_sector_capacity_lo       = 0x7570;
+       pSegIdDrvInfo->current_sector_capacity_hi       = 0x000B;
+
+       pSegIdDrvInfo->multi_sector_count                       = 0x04;
+       /* b8 : Multiple secotr setting valid , b[7:0] num of secotrs per block */
+       pSegIdDrvInfo->multi_sector_setting_valid               = 0x01;
+       pSegIdDrvInfo->total_user_addressable_sectors_lo        = 0x7570;
+       pSegIdDrvInfo->total_user_addressable_sectors_hi        = 0x000B;
+       pSegIdDrvInfo->single_dma_modes_supported               = 0x00;
+       pSegIdDrvInfo->single_dma_transfer_active               = 0x00;
+       /* b2 :Multi-word DMA mode 2, b1 : Multi-word DMA mode 1 */
+       pSegIdDrvInfo->multi_dma_modes_supported                = (0x1 << 0);
+       /* b2 :Multi-word DMA mode 2, b1 : Multi-word DMA mode 1 */
+       pSegIdDrvInfo->multi_dma_transfer_active                = (0x1 << 0);
+       /* b0 : PIO Mode-3 support, b1 : PIO Mode-4 support */
+       pSegIdDrvInfo->adv_pio_mode                             = 0x00;
+       /* 480(0x1E0)nsec for Multi-word DMA mode0
+        * 150(0x96) nsec for Multi-word DMA mode1
+        * 120(0x78) nsec for Multi-word DMA mode2
+        */
+       pSegIdDrvInfo->min_dma_cyc                      = 0x1E0;
+       pSegIdDrvInfo->recommend_dma_cyc                = 0x1E0;
+       pSegIdDrvInfo->min_pio_cyc_no_iordy             = 0x1E0;
+       pSegIdDrvInfo->min_pio_cyc_with_iordy           = 0x1E0;
+       memset((void *)pSegIdDrvInfo->reserved3, 0x00, 22);
+       /* b7 : ATA/ATAPI-7 ,b6 : ATA/ATAPI-6 ,b5 : ATA/ATAPI-5,b4 : ATA/ATAPI-4 */
+       pSegIdDrvInfo->major_ver_num                    = 0x7E;
+       /* 0x1C : ATA/ATAPI-6 T13 1532D revision1 */
+       pSegIdDrvInfo->minor_ver_num                    = 0x19;
+       /* NOP/READ BUFFER/WRITE BUFFER/Power management feature set support */
+       pSegIdDrvInfo->feature_cmd_set_suprt0           = 0x7068;
+       /* Features/command set is valid/Advanced Pwr management/CFA feature set
+        * not support
+        */
+       pSegIdDrvInfo->feature_cmd_set_suprt1           = 0x400C;
+       pSegIdDrvInfo->feature_cmd_set_suprt2           = 0x4000;
+       /* READ/WRITE BUFFER/PWR Management enable */
+       pSegIdDrvInfo->feature_cmd_set_en0              = 0x7000;
+       /* CFA feature is disabled / Advancde power management disable */
+       pSegIdDrvInfo->feature_cmd_set_en1              = 0x0;
+       pSegIdDrvInfo->feature_cmd_set_en2              = 0x4000;
+       pSegIdDrvInfo->reserved4                        = 0x0;
+       /* 0x1 * 2minutes */
+       pSegIdDrvInfo->req_time_for_security_er_done    = 0x19;
+       pSegIdDrvInfo->req_time_for_enhan_security_er_done      = 0x19;
+       /* Advanced power management level 1 */
+       pSegIdDrvInfo->adv_pwr_mgm_lvl_val                      = 0x0;
+       pSegIdDrvInfo->reserved5                        = 0x0;
+       memset((void *)pSegIdDrvInfo->reserved6, 0x00, 68);
+       /* Security mode feature is disabled */
+       pSegIdDrvInfo->security_stas                    = 0x0;
+       memset((void *)pSegIdDrvInfo->vendor_uniq_bytes, 0x00, 62);
+       /* CFA power mode 1 support in maximum 200mA */
+       pSegIdDrvInfo->cfa_pwr_mode                     = 0x0100;
+       memset((void *)pSegIdDrvInfo->reserved7, 0x00, 190);
+}
+
+static int mg_storage_config(void)
+{
+       u8 buff[512];
+
+       if (mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_vcmd)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       mg_gen_ataid((mg_io_type_drv_info *)buff);
+
+       if (mg_mflash_do_write_sects(buff, 0, 1, mg_vcmd_update_stgdrvinfo)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       if (mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_default)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       LOG_INFO("mflash: storage config ok");
+       return ERROR_OK;
+}
+
+static int mg_boot_config(void)
+{
+       u8 buff[512];
+
+       if (mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_vcmd)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       memset(buff, 0xff, 512);
+
+       buff[0] = mg_op_mode_snd;               /* operation mode */
+       buff[1] = MG_UNLOCK_OTP_AREA;
+       buff[2] = 4;                            /* boot size */
+       *((u32 *)(buff + 4)) = 0;               /* XIP size */
+
+       if (mg_mflash_do_write_sects(buff, 0, 1, mg_vcmd_update_xipinfo)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       if (mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_default)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       LOG_INFO("mflash: boot config ok");
+       return ERROR_OK;
+}
+
+static int mg_set_pll(mg_pll_t *pll)
+{
+       u8 buff[512];
+
+       memset(buff, 0xff, 512);
+       /* PLL Lock cycle and Feedback 9bit Divider */
+       memcpy(buff, &pll->lock_cyc, sizeof(u32));
+       memcpy(buff + 4, &pll->feedback_div, sizeof(u16));
+       buff[6] = pll->input_div;               /* PLL Input 5bit Divider */
+       buff[7] = pll->output_div;              /* PLL Output Divider */
+
+       if (mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_vcmd)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       if (mg_mflash_do_write_sects(buff, 0, 1, mg_vcmd_wr_pll)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       if (mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_default)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       LOG_INFO("mflash: set pll ok");
+       return ERROR_OK;
+}
+
+static int mg_erase_nand(void)
+{
+       if (mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_vcmd)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       if (mg_mflash_do_write_sects(NULL, 0, 0, mg_vcmd_purge_nand)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       if (mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_default)
+                       != ERROR_OK)
+               return ERROR_FAIL;
+
+       LOG_INFO("mflash: erase nand ok");
+       return ERROR_OK;
+}
+
+int mg_config_cmd(struct command_context_s *cmd_ctx, char *cmd,
+               char **args, int argc)
+{
+       double fin, fout;
+       mg_pll_t pll;
+
+       if (mg_verify_interface() != ERROR_OK)
+               return ERROR_FAIL;
+
+       if (mg_mflash_rst() != ERROR_OK)
+               return ERROR_FAIL;
+
+       switch (argc) {
+               case 2:
+                       if (!strcmp(args[1], "boot")) {
+                               if (mg_boot_config() != ERROR_OK)
+                                       return ERROR_FAIL;
+
+                               return ERROR_OK;
+                       } else if (!strcmp(args[1], "storage")) {
+                               if (mg_storage_config() != ERROR_OK)
+                                       return ERROR_FAIL;
+
+                               return ERROR_OK;
+                       } else
+                               return ERROR_COMMAND_NOTFOUND;
+                       break;
+               case 3:
+                       if (!strcmp(args[1], "pll")) {
+                               fin = strtoul(args[2], NULL, 0);
+
+                               if (fin > MG_PLL_CLK_OUT)
+                                       return ERROR_FAIL;
+
+                               fout = mg_calc_pll(fin, &pll);
+
+                               if (!fout)
+                                       return ERROR_FAIL;
+
+                               LOG_INFO("mflash: Fout=%u Hz, feedback=%u," 
+                                               "indiv=%u, outdiv=%u, lock=%u",
+                                               (u32)fout, pll.feedback_div,
+                                               pll.input_div, pll.output_div,
+                                               pll.lock_cyc);
+
+                               if (mg_erase_nand() != ERROR_OK)
+                                       return ERROR_FAIL;
+
+                               if (mg_set_pll(&pll) != ERROR_OK)
+                                       return ERROR_FAIL;
+
+                               return ERROR_OK;
+                       } else
+                               return ERROR_COMMAND_NOTFOUND;
+                       break;
+               default:
+                       return ERROR_COMMAND_SYNTAX_ERROR;
+       }
 
        return ERROR_OK;
 }
@@ -784,46 +1231,40 @@ static int mflash_dump_command(struct command_context_s *cmd_ctx, char *cmd, cha
 int mflash_init_drivers(struct command_context_s *cmd_ctx)
 {
        if (mflash_bank) {
-               register_command(cmd_ctx, mflash_cmd, "probe", mflash_probe_command, COMMAND_EXEC, NULL);
-               register_command(cmd_ctx, mflash_cmd, "write", mflash_write_command, COMMAND_EXEC,
+               register_command(cmd_ctx, mflash_cmd, "probe", mg_probe_cmd, COMMAND_EXEC, NULL);
+               register_command(cmd_ctx, mflash_cmd, "write", mg_write_cmd, COMMAND_EXEC,
                                "mflash write <num> <file> <address>");
-               register_command(cmd_ctx, mflash_cmd, "dump", mflash_dump_command, COMMAND_EXEC,
+               register_command(cmd_ctx, mflash_cmd, "dump", mg_dump_cmd, COMMAND_EXEC,
                                                "mflash dump <num> <file> <address> <size>");
+               register_command(cmd_ctx, mflash_cmd, "config", mg_config_cmd,
+                               COMMAND_EXEC, "mflash config <num> <stage>");
        }
 
        return ERROR_OK;
 }
 
-static int mflash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+static int mg_bank_cmd(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 {
        target_t *target;
        char *str;
        int i;
 
-       if (argc < 8)
+       if (argc < 4)
        {
                return ERROR_COMMAND_SYNTAX_ERROR;
        }
 
-       if ((target = get_target_by_num(strtoul(args[7], NULL, 0))) == NULL)
+       if ((target = get_target(args[3])) == NULL)
        {
-               LOG_ERROR("target %lu not defined", strtoul(args[7], NULL, 0));
+               LOG_ERROR("target '%s' not defined", args[3]);
                return ERROR_FAIL;
        }
 
        mflash_bank = calloc(sizeof(mflash_bank_t), 1);
        mflash_bank->base = strtoul(args[1], NULL, 0);
-       mflash_bank->chip_width = strtoul(args[2], NULL, 0);
-       mflash_bank->bus_width = strtoul(args[3], NULL, 0);
-       mflash_bank->rst_pin.num = strtoul(args[4], &str, 0);
+       mflash_bank->rst_pin.num = strtoul(args[2], &str, 0);
        if (*str)
                mflash_bank->rst_pin.port[0] = (u16)tolower(str[0]);
-       mflash_bank->wp_pin.num = strtol(args[5], &str, 0);
-       if (*str)
-               mflash_bank->wp_pin.port[0] = (u16)tolower(str[0]);
-       mflash_bank->dpd_pin.num = strtol(args[6], &str, 0);
-       if (*str)
-               mflash_bank->dpd_pin.port[0] = (u16)tolower(str[0]);
 
        mflash_bank->target = target;
 
@@ -844,7 +1285,7 @@ static int mflash_bank_command(struct command_context_s *cmd_ctx, char *cmd, cha
 int mflash_register_commands(struct command_context_s *cmd_ctx)
 {
        mflash_cmd = register_command(cmd_ctx, NULL, "mflash", NULL, COMMAND_ANY, NULL);
-       register_command(cmd_ctx, mflash_cmd, "bank", mflash_bank_command, COMMAND_CONFIG,
-                       "mflash bank <soc> <base> <chip_width> <bus_width> <RST pin> <WP pin> <DPD pin> <target #>");
+       register_command(cmd_ctx, mflash_cmd, "bank", mg_bank_cmd, COMMAND_CONFIG,
+                       "mflash bank <soc> <base> <RST pin> <target #>");
        return ERROR_OK;
 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)