* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
- * Copyright (C) 2007,2008 Øyvind Harboe *
+ * Copyright (C) 2007,2008 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* Copyright (C) 2008 by Spencer Oliver *
/* flash drivers
*/
extern flash_driver_t lpc2000_flash;
+extern flash_driver_t lpc288x_flash;
+extern flash_driver_t lpc2900_flash;
extern flash_driver_t cfi_flash;
+extern flash_driver_t at91sam3_flash;
extern flash_driver_t at91sam7_flash;
extern flash_driver_t str7x_flash;
extern flash_driver_t str9x_flash;
extern flash_driver_t stm32x_flash;
extern flash_driver_t tms470_flash;
extern flash_driver_t ecosflash_flash;
-extern flash_driver_t lpc288x_flash;
extern flash_driver_t ocl_flash;
extern flash_driver_t pic32mx_flash;
extern flash_driver_t avr_flash;
flash_driver_t *flash_drivers[] = {
&lpc2000_flash,
+ &lpc288x_flash,
+ &lpc2900_flash,
&cfi_flash,
&at91sam7_flash,
+ &at91sam3_flash,
&str7x_flash,
&str9x_flash,
&aduc702x_flash,
&stm32x_flash,
&tms470_flash,
&ecosflash_flash,
- &lpc288x_flash,
&ocl_flash,
&pic32mx_flash,
&avr_flash,
retval = bank->driver->write(bank, buffer, offset, count);
if (retval != ERROR_OK)
{
- LOG_ERROR("error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32 " (%d)",
+ LOG_ERROR("error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32 " (%d)",
bank->base, offset, retval);
}
if ((retval = p->driver->auto_probe(p)) != ERROR_OK)
return retval;
- command_print(cmd_ctx,
+ command_print(cmd_ctx,
"#%" PRIi32 " : %s at 0x%8.8" PRIx32 ", size 0x%8.8" PRIx32 ", buswidth %i, chipwidth %i",
i,
- p->driver->name,
- p->base,
- p->size,
- p->bus_width,
+ p->driver->name,
+ p->base,
+ p->size,
+ p->bus_width,
p->chip_width);
for (j = 0; j < p->num_sectors; j++)
{
else
protect_state = "protection state unknown";
- command_print(cmd_ctx,
+ command_print(cmd_ctx,
"\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s",
j,
- p->sectors[j].offset,
- p->sectors[j].size,
+ p->sectors[j].offset,
+ p->sectors[j].size,
p->sectors[j].size >> 10,
protect_state);
}
command_print(cmd_ctx,
"\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s",
- j,
- p->sectors[j].offset,
- p->sectors[j].size,
+ j,
+ p->sectors[j].offset,
+ p->sectors[j].size,
p->sectors[j].size >> 10,
erase_state);
}
return ERROR_OK;
}
-static int handle_flash_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+static int flash_check_sector_parameters(struct command_context_s *cmd_ctx,
+ uint32_t first, uint32_t last, uint32_t num_sectors)
+{
+ if (!(first <= last)) {
+ command_print(cmd_ctx, "ERROR: "
+ "first sector must be <= last sector");
+ return ERROR_FAIL;
+ }
+
+ if (!(last <= (num_sectors - 1))) {
+ command_print(cmd_ctx, "ERROR: last sector must be <= %d",
+ (int) num_sectors - 1);
+ return ERROR_FAIL;
+ }
+
+ return ERROR_OK;
+}
+
+static int handle_flash_erase_command(struct command_context_s *cmd_ctx,
+ char *cmd, char **args, int argc)
{
if (argc > 2)
{
- int first = strtoul(args[1], NULL, 0);
- int last = strtoul(args[2], NULL, 0);
+ uint32_t bank_nr;
+ uint32_t first;
+ uint32_t last;
int retval;
- flash_bank_t *p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- duration_t duration;
- char *duration_text;
- duration_start_measure(&duration);
+ if ((retval = parse_u32(args[0], &bank_nr)) != ERROR_OK)
+ return retval;
+ flash_bank_t *p = get_flash_bank_by_num(bank_nr);
if (!p)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
+ return ERROR_OK;
- if ((retval = flash_driver_erase(p, first, last)) == ERROR_OK)
- {
- if ((retval = duration_stop_measure(&duration, &duration_text)) != ERROR_OK)
- {
+ if ((retval = parse_u32(args[1], &first)) != ERROR_OK)
+ return retval;
+ if (strcmp(args[2], "last") == 0)
+ last = p->num_sectors - 1;
+ else
+ if ((retval = parse_u32(args[2], &last)) != ERROR_OK)
return retval;
- }
- command_print(cmd_ctx, "erased sectors %i through %i on flash bank %li in %s",
- first, last, strtoul(args[0], 0, 0), duration_text);
+ if ((retval = flash_check_sector_parameters(cmd_ctx,
+ first, last, p->num_sectors)) != ERROR_OK)
+ return retval;
+
+ duration_t duration;
+ char *duration_text;
+ duration_start_measure(&duration);
+
+ if ((retval = flash_driver_erase(p, first, last)) == ERROR_OK) {
+ if ((retval = duration_stop_measure(&duration,
+ &duration_text)) != ERROR_OK)
+ return retval;
+ command_print(cmd_ctx, "erased sectors %i through %i "
+ "on flash bank %i in %s",
+ (int) first, (int) last, (int) bank_nr,
+ duration_text);
free(duration_text);
}
}
else
- {
return ERROR_COMMAND_SYNTAX_ERROR;
- }
return ERROR_OK;
}
-static int handle_flash_protect_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+static int handle_flash_protect_command(struct command_context_s *cmd_ctx,
+ char *cmd, char **args, int argc)
{
if (argc > 3)
{
- int first = strtoul(args[1], NULL, 0);
- int last = strtoul(args[2], NULL, 0);
- int set;
+ uint32_t bank_nr;
+ uint32_t first;
+ uint32_t last;
int retval;
- flash_bank_t *p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ int set;
+
+ if ((retval = parse_u32(args[0], &bank_nr)) != ERROR_OK)
+ return retval;
+
+ flash_bank_t *p = get_flash_bank_by_num(bank_nr);
if (!p)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
- }
+
+ if ((retval = parse_u32(args[1], &first)) != ERROR_OK)
+ return retval;
+ if (strcmp(args[2], "last") == 0)
+ last = p->num_sectors - 1;
+ else
+ if ((retval = parse_u32(args[2], &last)) != ERROR_OK)
+ return retval;
if (strcmp(args[3], "on") == 0)
set = 1;
else if (strcmp(args[3], "off") == 0)
set = 0;
else
- {
return ERROR_COMMAND_SYNTAX_ERROR;
- }
+
+ if ((retval = flash_check_sector_parameters(cmd_ctx,
+ first, last, p->num_sectors)) != ERROR_OK)
+ return retval;
retval = flash_driver_protect(p, set, first, last);
- if (retval == ERROR_OK)
- {
- command_print(cmd_ctx, "%s protection for sectors %i through %i on flash bank %li",
- (set) ? "set" : "cleared", first,
- last, strtoul(args[0], 0, 0));
+ if (retval == ERROR_OK) {
+ command_print(cmd_ctx, "%s protection for sectors %i "
+ "through %i on flash bank %i",
+ (set) ? "set" : "cleared", (int) first,
+ (int) last, (int) bank_nr);
}
}
else
- {
return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
return ERROR_OK;
}
image_close(&image);
return retvaltemp;
}
- if (retval == ERROR_OK)
- {
- command_print(cmd_ctx,
- "wrote %" PRIu32 " byte from file %s in %s (%f kb/s)",
- written,
- args[0],
- duration_text,
- (float)written / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
- }
+
+ float speed;
+
+ speed = written / 1024.0;
+ speed /= ((float)duration.duration.tv_sec
+ + ((float)duration.duration.tv_usec / 1000000.0));
+ command_print(cmd_ctx,
+ "wrote %" PRIu32 " byte from file %s in %s (%f kb/s)",
+ written, args[0], duration_text, speed);
+
free(duration_text);
image_close(&image);
duration_start_measure(&duration);
- for (wrote = 0; wrote<(count*wordsize); wrote += cur_size)
+ for (wrote = 0; wrote < (count*wordsize); wrote += cur_size)
{
- cur_size = MIN( (count*wordsize - wrote), sizeof(chunk) );
+ cur_size = MIN((count*wordsize - wrote), sizeof(chunk));
flash_bank_t *bank;
bank = get_flash_bank_by_addr(target, address);
if (bank == NULL)
return err;
unsigned i;
- for (i = 0; i<cur_size; i++)
+ for (i = 0; i < cur_size; i++)
{
if (readback[i]!=chunk[i])
{
- LOG_ERROR("Verfication error address 0x%08" PRIx32 ", read back 0x%02x, expected 0x%02x",
+ LOG_ERROR("Verfication error address 0x%08" PRIx32 ", read back 0x%02x, expected 0x%02x",
address + wrote + i, readback[i], chunk[i]);
return ERROR_FAIL;
}
return retval;
}
- if (err == ERROR_OK)
- {
- float speed;
- speed = wrote / 1024.0;
- speed/=((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0));
- command_print(cmd_ctx,
- "wrote %" PRId32 " bytes to 0x%8.8" PRIx32 " in %s (%f kb/s)",
- count*wordsize,
- address,
- duration_text,
- speed);
- }
+ float speed;
+
+ speed = wrote / 1024.0;
+ speed /= ((float)duration.duration.tv_sec
+ + ((float)duration.duration.tv_usec / 1000000.0));
+ command_print(cmd_ctx,
+ "wrote %" PRIu32 " bytes to 0x%8.8" PRIx32 " in %s (%f kb/s)",
+ wrote, address, duration_text, speed);
+
free(duration_text);
return ERROR_OK;
}
}
if (retval == ERROR_OK)
{
- command_print(cmd_ctx,
+ command_print(cmd_ctx,
"wrote %lld byte from file %s to flash bank %li at offset 0x%8.8" PRIx32 " in %s (%f kb/s)",
- fileio.size,
- args[1],
- strtoul(args[0], NULL, 0),
- offset,
+ fileio.size,
+ args[1],
+ strtoul(args[0], NULL, 0),
+ offset,
duration_text,
(float)fileio.size / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
}
}
}
- if ( first == -1 || last == -1 )
+ if (first == -1 || last == -1)
return ERROR_OK;
return flash_driver_erase(c, first, last);
run_size += pad_bytes;
padding[section_last] = 0;
- LOG_INFO("Padding image section %d with %d bytes", section_last-1, pad_bytes );
+ LOG_INFO("Padding image section %d with %d bytes", section_last-1, pad_bytes);
}
/* fit the run into bank constraints */
if (erase)
{
/* calculate and erase sectors */
- retval = flash_erase_address_range( target, run_address, run_size );
+ retval = flash_erase_address_range(target, run_address, run_size);
}
if (retval == ERROR_OK)