* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
****************************************************************************/
-/***************************************************************************************************************************************************************************************
+/***************************************************************************
*
* New flash setup command:
*
-* flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
+* flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_id>
+* [<chip_type> <banks>
+* <sectors_per_bank> <pages_per_sector>
+* <page_size> <num_nvmbits>
+* <ext_freq_khz>]
*
* <ext_freq_khz> - MUST be used if clock is from external source,
-* CAN be used if main oscillator frequency is known (recomended)
+* CAN be used if main oscillator frequency is known (recommended)
* Examples:
-* flash bank at91sam7 0x00100000 0 0 4 0 0 AT91SAM7XC256 1 16 64 256 3 25000 ==== RECOMENDED ============
-* flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 25000 (auto-detection, except for clock) ==== RECOMENDED ============
-* flash bank at91sam7 0x00100000 0 0 4 0 0 AT91SAM7XC256 1 16 64 256 3 0 ==== NOT RECOMENDED !!! ====
-* flash bank at91sam7 0 0 0 0 0 (old style, full auto-detection) ==== NOT RECOMENDED !!! ====
-****************************************************************************************************************************************************************************************/
+* ==== RECOMMENDED (covers clock speed) ============
+* flash bank at91sam7 0x00100000 0 0 4 $_TARGETNAME AT91SAM7XC256 1 16 64 256 3 25000
+* (if auto-detect fails; provides clock spec)
+* flash bank at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 25000
+* (auto-detect everything except the clock)
+* ==== NOT RECOMMENDED !!! (clock speed is not configured) ====
+* flash bank at91sam7 0x00100000 0 0 4 $_TARGETNAME AT91SAM7XC256 1 16 64 256 3 0
+* (if auto-detect fails)
+* flash bank at91sam7 0 0 0 0 $_TARGETNAME
+* (old style, auto-detect everything)
+****************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#include "at91sam7.h"
#include "binarybuffer.h"
-
-static int at91sam7_register_commands(struct command_context_s *cmd_ctx);
-static int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-static int at91sam7_erase(struct flash_bank_s *bank, int first, int last);
-static int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last);
-static int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-static int at91sam7_probe(struct flash_bank_s *bank);
-//static int at91sam7_auto_probe(struct flash_bank_s *bank);
-static int at91sam7_erase_check(struct flash_bank_s *bank);
static int at91sam7_protect_check(struct flash_bank_s *bank);
-static int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size);
+static int at91sam7_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count);
-static u32 at91sam7_get_flash_status(target_t *target, int bank_number);
+static uint32_t at91sam7_get_flash_status(target_t *target, int bank_number);
static void at91sam7_set_flash_mode(flash_bank_t *bank, int mode);
-static u32 at91sam7_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout);
-static int at91sam7_flash_command(struct flash_bank_s *bank, u8 cmd, u16 pagen);
-static int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+static uint32_t at91sam7_wait_status_busy(flash_bank_t *bank, uint32_t waitbits, int timeout);
+static int at91sam7_flash_command(struct flash_bank_s *bank, uint8_t cmd, uint16_t pagen);
-flash_driver_t at91sam7_flash =
-{
- .name = "at91sam7",
- .register_commands = at91sam7_register_commands,
- .flash_bank_command = at91sam7_flash_bank_command,
- .erase = at91sam7_erase,
- .protect = at91sam7_protect,
- .write = at91sam7_write,
- .probe = at91sam7_probe,
- .auto_probe = at91sam7_probe,
- .erase_check = at91sam7_erase_check,
- .protect_check = at91sam7_protect_check,
- .info = at91sam7_info
-};
-
-static u32 MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };
-static u32 MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };
-static u32 MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };
+static uint32_t MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };
+static uint32_t MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };
+static uint32_t MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };
static char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"};
static long SRAMSIZ[16] = {
-1,
0x0400, /* 1K */
- 0x0800, /* 2K */
- -1,
+ 0x0800, /* 2K */
+ -1,
0x1c000, /* 112K */
0x1000, /* 4K */
0x14000, /* 80K */
};
#endif
-static int at91sam7_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC,
- "at91sam7 gpnvm <bit> set|clear, set or clear one gpnvm bit");
- return ERROR_OK;
-}
-
-static u32 at91sam7_get_flash_status(target_t *target, int bank_number)
+static uint32_t at91sam7_get_flash_status(target_t *target, int bank_number)
{
- u32 fsr;
+ uint32_t fsr;
target_read_u32(target, MC_FSR[bank_number], &fsr);
return fsr;
{
at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
target_t *target = bank->target;
- u32 mckr, mcfr, pllr, mor;
+ uint32_t mckr, mcfr, pllr, mor;
unsigned long tmp = 0, mainfreq;
/* Read Clock Generator Main Oscillator Register */
target_read_u32(target, PMC_MCKR, &mckr);
/* Read Clock Generator PLL Register */
target_read_u32(target, CKGR_PLLR, &pllr);
-
+
at91sam7_info->mck_valid = 0;
at91sam7_info->mck_freq = 0;
- switch (mckr & PMC_MCKR_CSS)
+ switch (mckr & PMC_MCKR_CSS)
{
case 0: /* Slow Clock */
at91sam7_info->mck_valid = 1;
break;
case 1: /* Main Clock */
- if ((mcfr & CKGR_MCFR_MAINRDY) &&
+ if ((mcfr & CKGR_MCFR_MAINRDY) &&
(at91sam7_info->ext_freq == 0))
{
at91sam7_info->mck_valid = 1;
break;
case 3: /* PLL Clock */
- if ((mcfr & CKGR_MCFR_MAINRDY) &&
- (at91sam7_info->ext_freq == 0))
+ if ((mcfr & CKGR_MCFR_MAINRDY) &&
+ (at91sam7_info->ext_freq == 0))
{
target_read_u32(target, CKGR_PLLR, &pllr);
if (!(pllr & CKGR_PLLR_DIV))
}
/* Prescaler adjust */
- if ( (((mckr & PMC_MCKR_PRES) >> 2) == 7) || (tmp == 0) )
+ if ((((mckr & PMC_MCKR_PRES) >> 2) == 7) || (tmp == 0))
{
at91sam7_info->mck_valid = 0;
at91sam7_info->mck_freq = 0;
/* Setup the timimg registers for nvbits or normal flash */
static void at91sam7_set_flash_mode(flash_bank_t *bank, int mode)
{
- u32 fmr, fmcn = 0, fws = 0;
+ uint32_t fmr, fmcn = 0, fws = 0;
at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
target_t *target = bank->target;
if (at91sam7_info->cidr_arch == 0x60)
{
/* AT91SAM7A3 uses master clocks in 100 ns */
- fmcn = (at91sam7_info->mck_freq/10000000ul)+1;
+ fmcn = (at91sam7_info->mck_freq/10000000ul) + 1;
}
else
{
/* master clocks in 1uS for ARCH 0x7 types */
- fmcn = (at91sam7_info->mck_freq/1000000ul)+1;
+ fmcn = (at91sam7_info->mck_freq/1000000ul) + 1;
}
}
else if (mode == FMR_TIMING_FLASH)
{
/* main clocks in 1.5uS */
fmcn = (at91sam7_info->mck_freq/1000000ul)+
- (at91sam7_info->mck_freq/2000000ul)+1;
+ (at91sam7_info->mck_freq/2000000ul) + 1;
}
/* hard overclocking */
if (fmcn > 0xFF)
fmcn = 0xFF;
- /* Only allow fmcn=0 if clock period is > 30 us = 33kHz. */
+ /* Only allow fmcn = 0 if clock period is > 30 us = 33kHz. */
if (at91sam7_info->mck_freq <= 33333ul)
fmcn = 0;
- /* Only allow fws=0 if clock frequency is < 30 MHz. */
+ /* Only allow fws = 0 if clock frequency is < 30 MHz. */
if (at91sam7_info->mck_freq > 30000000ul)
fws = 1;
- LOG_DEBUG("fmcn[%i]: %i", bank->bank_number, fmcn);
+ LOG_DEBUG("fmcn[%i]: %i", bank->bank_number, (int)(fmcn));
fmr = fmcn << 16 | fws << 8;
target_write_u32(target, MC_FMR[bank->bank_number], fmr);
}
at91sam7_info->flashmode = mode;
}
-static u32 at91sam7_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout)
+static uint32_t at91sam7_wait_status_busy(flash_bank_t *bank, uint32_t waitbits, int timeout)
{
- u32 status;
+ uint32_t status;
while ((!((status = at91sam7_get_flash_status(bank->target, bank->bank_number)) & waitbits)) && (timeout-- > 0))
{
- LOG_DEBUG("status[%i]: 0x%x", bank->bank_number, status);
+ LOG_DEBUG("status[%i]: 0x%" PRIx32 "", (int)bank->bank_number, status);
alive_sleep(1);
}
- LOG_DEBUG("status[%i]: 0x%x", bank->bank_number, status);
+ LOG_DEBUG("status[%i]: 0x%" PRIx32 "", bank->bank_number, status);
if (status & 0x0C)
{
- LOG_ERROR("status register: 0x%x", status);
+ LOG_ERROR("status register: 0x%" PRIx32 "", status);
if (status & 0x4)
LOG_ERROR("Lock Error Bit Detected, Operation Abort");
if (status & 0x8)
}
/* Send one command to the AT91SAM flash controller */
-static int at91sam7_flash_command(struct flash_bank_s *bank, u8 cmd, u16 pagen)
+static int at91sam7_flash_command(struct flash_bank_s *bank, uint8_t cmd, uint16_t pagen)
{
- u32 fcr;
+ uint32_t fcr;
at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
target_t *target = bank->target;
- fcr = (0x5A<<24) | ((pagen&0x3FF)<<8) | cmd;
+ fcr = (0x5A << 24) | ((pagen&0x3FF) << 8) | cmd;
target_write_u32(target, MC_FCR[bank->bank_number], fcr);
- LOG_DEBUG("Flash command: 0x%x, flash bank: %i, page number: %u", fcr, bank->bank_number+1, pagen);
+ LOG_DEBUG("Flash command: 0x%" PRIx32 ", flash bank: %i, page number: %u", fcr, bank->bank_number + 1, pagen);
- if ((at91sam7_info->cidr_arch == 0x60)&&((cmd==SLB)|(cmd==CLB)))
+ if ((at91sam7_info->cidr_arch == 0x60) && ((cmd == SLB) | (cmd == CLB)))
{
/* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
if (at91sam7_wait_status_busy(bank, MC_FSR_EOL, 10)&0x0C)
return ERROR_OK;
}
- if (at91sam7_wait_status_busy(bank, MC_FSR_FRDY, 10)&0x0C)
+ if (at91sam7_wait_status_busy(bank, MC_FSR_FRDY, 10)&0x0C)
{
return ERROR_FLASH_OPERATION_FAILED;
}
at91sam7_flash_bank_t *at91sam7_info;
target_t *target = t_bank->target;
- u16 bnk, sec;
- u16 arch;
- u32 cidr;
- u8 banks_num = 0;
- u16 num_nvmbits = 0;
- u16 sectors_num = 0;
- u16 pages_per_sector = 0;
- u16 page_size = 0;
- u32 ext_freq;
- u32 bank_size;
- u32 base_address = 0;
+ uint16_t bnk, sec;
+ uint16_t arch;
+ uint32_t cidr;
+ uint8_t banks_num = 0;
+ uint16_t num_nvmbits = 0;
+ uint16_t sectors_num = 0;
+ uint16_t pages_per_sector = 0;
+ uint16_t page_size = 0;
+ uint32_t ext_freq;
+ uint32_t bank_size;
+ uint32_t base_address = 0;
char *target_name = "Unknown";
at91sam7_info = t_bank->driver_priv;
at91sam7_info = t_bank->driver_priv;
at91sam7_info->cidr = cidr;
- at91sam7_info->cidr_ext = (cidr>>31)&0x0001;
- at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;
- at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;
- at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;
- at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;
- at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;
- at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;
+ at91sam7_info->cidr_ext = (cidr >> 31)&0x0001;
+ at91sam7_info->cidr_nvptyp = (cidr >> 28)&0x0007;
+ at91sam7_info->cidr_arch = (cidr >> 20)&0x00FF;
+ at91sam7_info->cidr_sramsiz = (cidr >> 16)&0x000F;
+ at91sam7_info->cidr_nvpsiz2 = (cidr >> 12)&0x000F;
+ at91sam7_info->cidr_nvpsiz = (cidr >> 8)&0x000F;
+ at91sam7_info->cidr_eproc = (cidr >> 5)&0x0007;
at91sam7_info->cidr_version = cidr&0x001F;
/* calculate master clock frequency */
return ERROR_OK;
}
- arch = (cidr>>20)&0x00FF;
+ arch = (cidr >> 20)&0x00FF;
/* check flash size */
- switch ((cidr>>8)&0x000F)
+ switch ((cidr >> 8)&0x000F)
{
case FLASH_SIZE_8KB:
break;
/* calculate bank size */
bank_size = sectors_num * pages_per_sector * page_size;
- for (bnk=0; bnk<banks_num; bnk++)
+ for (bnk = 0; bnk < banks_num; bnk++)
{
if (bnk > 0)
{
/* create a new flash bank element */
flash_bank_t *fb = malloc(sizeof(flash_bank_t));
fb->target = target;
- fb->driver = &at91sam7_flash;
+ fb->driver = bank->driver;
fb->driver_priv = malloc(sizeof(at91sam7_flash_bank_t));
fb->next = NULL;
/* allocate sectors */
t_bank->sectors = malloc(sectors_num * sizeof(flash_sector_t));
- for (sec=0; sec<sectors_num; sec++)
+ for (sec = 0; sec < sectors_num; sec++)
{
t_bank->sectors[sec].offset = sec * pages_per_sector * page_size;
t_bank->sectors[sec].size = pages_per_sector * page_size;
at91sam7_info = t_bank->driver_priv;
at91sam7_info->cidr = cidr;
- at91sam7_info->cidr_ext = (cidr>>31)&0x0001;
- at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;
- at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;
- at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;
- at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;
- at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;
- at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;
+ at91sam7_info->cidr_ext = (cidr >> 31)&0x0001;
+ at91sam7_info->cidr_nvptyp = (cidr >> 28)&0x0007;
+ at91sam7_info->cidr_arch = (cidr >> 20)&0x00FF;
+ at91sam7_info->cidr_sramsiz = (cidr >> 16)&0x000F;
+ at91sam7_info->cidr_nvpsiz2 = (cidr >> 12)&0x000F;
+ at91sam7_info->cidr_nvpsiz = (cidr >> 8)&0x000F;
+ at91sam7_info->cidr_eproc = (cidr >> 5)&0x0007;
at91sam7_info->cidr_version = cidr&0x001F;
at91sam7_info->target_name = target_name;
at91sam7_protect_check(t_bank);
}
- LOG_DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch );
+ LOG_DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch);
return ERROR_OK;
}
static int at91sam7_erase_check(struct flash_bank_s *bank)
{
target_t *target = bank->target;
- u16 retval;
- u32 blank;
- u16 fast_check;
- u8 *buffer;
- u16 nSector;
- u16 nByte;
+ uint16_t retval;
+ uint32_t blank;
+ uint16_t fast_check;
+ uint8_t *buffer;
+ uint16_t nSector;
+ uint16_t nByte;
if (bank->target->state != TARGET_HALTED)
{
}
/* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
+ at91sam7_read_clock_info(bank);
at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
fast_check = 1;
- for (nSector=0; nSector<bank->num_sectors; nSector++)
+ for (nSector = 0; nSector < bank->num_sectors; nSector++)
{
- retval = target_blank_check_memory(target, bank->base+bank->sectors[nSector].offset,
+ retval = target_blank_check_memory(target, bank->base + bank->sectors[nSector].offset,
bank->sectors[nSector].size, &blank);
if (retval != ERROR_OK)
{
LOG_USER("Running slow fallback erase check - add working memory");
buffer = malloc(bank->sectors[0].size);
- for (nSector=0; nSector<bank->num_sectors; nSector++)
+ for (nSector = 0; nSector < bank->num_sectors; nSector++)
{
bank->sectors[nSector].is_erased = 1;
- retval = target_read_memory(target, bank->base+bank->sectors[nSector].offset, 4,
+ retval = target_read_memory(target, bank->base + bank->sectors[nSector].offset, 4,
bank->sectors[nSector].size/4, buffer);
if (retval != ERROR_OK)
return retval;
- for (nByte=0; nByte<bank->sectors[nSector].size; nByte++)
+ for (nByte = 0; nByte < bank->sectors[nSector].size; nByte++)
{
if (buffer[nByte] != 0xFF)
{
static int at91sam7_protect_check(struct flash_bank_s *bank)
{
- u8 lock_pos, gpnvm_pos;
- u32 status;
+ uint8_t lock_pos, gpnvm_pos;
+ uint32_t status;
at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
}
status = at91sam7_get_flash_status(bank->target, bank->bank_number);
- at91sam7_info->lockbits = (status>>16);
+ at91sam7_info->lockbits = (status >> 16);
at91sam7_info->num_lockbits_on = 0;
- for (lock_pos=0; lock_pos<bank->num_sectors; lock_pos++)
+ for (lock_pos = 0; lock_pos < bank->num_sectors; lock_pos++)
{
- if ( ((status>>(16+lock_pos))&(0x0001)) == 1)
+ if (((status >> (16 + lock_pos))&(0x0001)) == 1)
{
at91sam7_info->num_lockbits_on++;
bank->sectors[lock_pos].is_protected = 1;
/* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */
status = at91sam7_get_flash_status(bank->target, 0);
- at91sam7_info->securitybit = (status>>4)&0x01;
- at91sam7_info->nvmbits = (status>>8)&0xFF;
+ at91sam7_info->securitybit = (status >> 4)&0x01;
+ at91sam7_info->nvmbits = (status >> 8)&0xFF;
at91sam7_info->num_nvmbits_on = 0;
- for (gpnvm_pos=0; gpnvm_pos<at91sam7_info->num_nvmbits; gpnvm_pos++)
+ for (gpnvm_pos = 0; gpnvm_pos < at91sam7_info->num_nvmbits; gpnvm_pos++)
{
- if ( ((status>>(8+gpnvm_pos))&(0x01)) == 1)
+ if (((status >> (8 + gpnvm_pos))&(0x01)) == 1)
{
at91sam7_info->num_nvmbits_on++;
}
return ERROR_OK;
}
-/***************************************************************************************************************************************************************************************
-# flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
-# <ext_freq_khz> - MUST be used if clock is from external source
-# CAN be used if main oscillator frequency is known
-# Examples:
-# flash bank at91sam7 0x00100000 0 0 4 0 0 AT91SAM7XC256 1 16 64 256 3 25000 ==== RECOMENDED ============
-# flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 25000 (auto-detection, except for clock) ==== RECOMENDED ============
-# flash bank at91sam7 0x00100000 0 0 4 0 0 AT91SAM7XC256 1 16 64 256 3 0 ==== NOT RECOMENDED !!! ====
-# flash bank at91sam7 0 0 0 0 0 (old style, full auto-detection) ==== NOT RECOMENDED !!! ====
-****************************************************************************************************************************************************************************************/
-static int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+FLASH_BANK_COMMAND_HANDLER(at91sam7_flash_bank_command)
{
flash_bank_t *t_bank = bank;
at91sam7_flash_bank_t *at91sam7_info;
target_t *target = t_bank->target;
- u32 base_address;
- u32 bank_size;
- u32 ext_freq;
+ uint32_t base_address;
+ uint32_t bank_size;
+ uint32_t ext_freq = 0;
int chip_width;
int bus_width;
int banks_num;
int num_sectors;
- u16 pages_per_sector;
- u16 page_size;
- u16 num_nvmbits;
+ uint16_t pages_per_sector;
+ uint16_t page_size;
+ uint16_t num_nvmbits;
char *target_name;
at91sam7_info->ext_freq = 0;
at91sam7_info->flash_autodetection = 0;
- if (argc == 14)
+ if (argc < 13)
{
- ext_freq = atol(args[13]) * 1000;
+ at91sam7_info->flash_autodetection = 1;
+ return ERROR_OK;
+ }
+
+ COMMAND_PARSE_NUMBER(u32, args[1], base_address);
+
+ COMMAND_PARSE_NUMBER(int, args[3], chip_width);
+ COMMAND_PARSE_NUMBER(int, args[4], bus_width);
+
+ COMMAND_PARSE_NUMBER(int, args[8], banks_num);
+ COMMAND_PARSE_NUMBER(int, args[9], num_sectors);
+ COMMAND_PARSE_NUMBER(u16, args[10], pages_per_sector);
+ COMMAND_PARSE_NUMBER(u16, args[11], page_size);
+ COMMAND_PARSE_NUMBER(u16, args[12], num_nvmbits);
+
+ if (argc == 14) {
+ unsigned long freq;
+ COMMAND_PARSE_NUMBER(ulong, args[13], freq);
+ ext_freq = freq * 1000;
at91sam7_info->ext_freq = ext_freq;
}
- if ((argc != 14) ||
- (atoi(args[4]) == 0) || /* bus width */
- (atoi(args[8]) == 0) || /* banks number */
- (atoi(args[9]) == 0) || /* sectors per bank */
- (atoi(args[10]) == 0) || /* pages per sector */
- (atoi(args[11]) == 0) || /* page size */
- (atoi(args[12]) == 0)) /* nvmbits number */
+ if ((bus_width == 0) || (banks_num == 0) || (num_sectors == 0) ||
+ (pages_per_sector == 0) || (page_size == 0) || (num_nvmbits == 0))
{
at91sam7_info->flash_autodetection = 1;
return ERROR_OK;
}
- base_address = strtoul(args[1], NULL, 0);
- chip_width = atoi(args[3]);
- bus_width = atoi(args[4]);
- banks_num = atoi(args[8]);
- num_sectors = atoi(args[9]);
- pages_per_sector = atoi(args[10]);
- page_size = atoi(args[11]);
- num_nvmbits = atoi(args[12]);
-
- target_name = calloc(strlen(args[7])+1, sizeof(char));
+ target_name = calloc(strlen(args[7]) + 1, sizeof(char));
strcpy(target_name, args[7]);
/* calculate bank size */
bank_size = num_sectors * pages_per_sector * page_size;
- for (bnk=0; bnk<banks_num; bnk++)
+ for (bnk = 0; bnk < banks_num; bnk++)
{
if (bnk > 0)
{
/* create a new bank element */
flash_bank_t *fb = malloc(sizeof(flash_bank_t));
fb->target = target;
- fb->driver = &at91sam7_flash;
+ fb->driver = bank->driver;
fb->driver_priv = malloc(sizeof(at91sam7_flash_bank_t));
fb->next = NULL;
/* allocate sectors */
t_bank->sectors = malloc(num_sectors * sizeof(flash_sector_t));
- for (sec=0; sec<num_sectors; sec++)
+ for (sec = 0; sec < num_sectors; sec++)
{
t_bank->sectors[sec].offset = sec * pages_per_sector * page_size;
t_bank->sectors[sec].size = pages_per_sector * page_size;
{
at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
int sec;
- u32 nbytes, pos;
- u8 *buffer;
- u8 erase_all;
+ uint32_t nbytes, pos;
+ uint8_t *buffer;
+ uint8_t erase_all;
if (at91sam7_info->cidr == 0)
{
at91sam7_read_clock_info(bank);
at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
- if(erase_all)
+ if (erase_all)
{
- if (at91sam7_flash_command(bank, EA, 0) != ERROR_OK)
+ if (at91sam7_flash_command(bank, EA, 0) != ERROR_OK)
{
return ERROR_FLASH_OPERATION_FAILED;
}
{
/* allocate and clean buffer */
nbytes = (last - first + 1) * bank->sectors[first].size;
- buffer = malloc(nbytes * sizeof(u8));
- for (pos=0; pos<nbytes; pos++)
+ buffer = malloc(nbytes * sizeof(uint8_t));
+ for (pos = 0; pos < nbytes; pos++)
{
buffer[pos] = 0xFF;
}
- if ( at91sam7_write(bank, buffer, bank->sectors[first].offset, nbytes) != ERROR_OK)
+ if (at91sam7_write(bank, buffer, bank->sectors[first].offset, nbytes) != ERROR_OK)
{
return ERROR_FLASH_OPERATION_FAILED;
}
}
/* mark erased sectors */
- for (sec=first; sec<=last; sec++)
+ for (sec = first; sec <= last; sec++)
{
bank->sectors[sec].is_erased = 1;
}
static int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last)
{
- u32 cmd;
+ uint32_t cmd;
int sector;
- u32 pagen;
+ uint32_t pagen;
at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
at91sam7_read_clock_info(bank);
at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS);
- for (sector=first; sector<=last; sector++)
+ for (sector = first; sector <= last; sector++)
{
if (set)
cmd = SLB;
return ERROR_OK;
}
-static int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+static int at91sam7_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
{
int retval;
at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
target_t *target = bank->target;
- u32 dst_min_alignment, wcount, bytes_remaining = count;
- u32 first_page, last_page, pagen, buffer_pos;
+ uint32_t dst_min_alignment, wcount, bytes_remaining = count;
+ uint32_t first_page, last_page, pagen, buffer_pos;
if (at91sam7_info->cidr == 0)
{
if (offset % dst_min_alignment)
{
- LOG_WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
+ LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "", offset, dst_min_alignment);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
first_page = offset/dst_min_alignment;
last_page = CEIL(offset + count, dst_min_alignment);
- LOG_DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count);
+ LOG_DEBUG("first_page: %i, last_page: %i, count %i", (int)first_page, (int)last_page, (int)count);
/* Configure the flash controller timing */
at91sam7_read_clock_info(bank);
at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
- for (pagen=first_page; pagen<last_page; pagen++)
+ for (pagen = first_page; pagen < last_page; pagen++)
{
- if (bytes_remaining<dst_min_alignment)
+ if (bytes_remaining < dst_min_alignment)
count = bytes_remaining;
else
count = dst_min_alignment;
/* Write one block to the PageWriteBuffer */
buffer_pos = (pagen-first_page)*dst_min_alignment;
wcount = CEIL(count,4);
- if((retval = target->type->write_memory(target, bank->base+pagen*dst_min_alignment, 4, wcount, buffer+buffer_pos)) != ERROR_OK)
+ if ((retval = target_write_memory(target, bank->base + pagen*dst_min_alignment, 4, wcount, buffer + buffer_pos)) != ERROR_OK)
{
return retval;
}
{
return ERROR_FLASH_OPERATION_FAILED;
}
- LOG_DEBUG("Write flash bank:%i page number:%i", bank->bank_number, pagen);
+ LOG_DEBUG("Write flash bank:%i page number:%" PRIi32 "", bank->bank_number, pagen);
}
return ERROR_OK;
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size,
- " Cidr: 0x%8.8x | Arch: 0x%4.4x | Eproc: %s | Version: 0x%3.3x | Flashsize: 0x%8.8x\n",
- at91sam7_info->cidr, at91sam7_info->cidr_arch, EPROC[at91sam7_info->cidr_eproc],
- at91sam7_info->cidr_version, bank->size);
+ printed = snprintf(buf,
+ buf_size,
+ " Cidr: 0x%8.8" PRIx32 " | Arch: 0x%4.4x | Eproc: %s | Version: 0x%3.3x | Flashsize: 0x%8.8" PRIx32 "\n",
+ at91sam7_info->cidr,
+ at91sam7_info->cidr_arch,
+ EPROC[at91sam7_info->cidr_eproc],
+ at91sam7_info->cidr_version,
+ bank->size);
buf += printed;
buf_size -= printed;
printed = snprintf(buf, buf_size,
" Master clock (estimated): %u KHz | External clock: %u KHz\n",
- at91sam7_info->mck_freq / 1000, at91sam7_info->ext_freq / 1000);
+ (unsigned)(at91sam7_info->mck_freq / 1000), (unsigned)(at91sam7_info->ext_freq / 1000));
buf += printed;
buf_size -= printed;
return ERROR_OK;
}
-/*
-* On AT91SAM7S: When the gpnvm bits are set with
+/*
+* On AT91SAM7S: When the gpnvm bits are set with
* > at91sam7 gpnvm bitnr set
-* the changes are not visible in the flash controller status register MC_FSR
+* the changes are not visible in the flash controller status register MC_FSR
* until the processor has been reset.
* On the Olimex board this requires a power cycle.
* Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3):
* The maximum number of write/erase cycles for Non volatile Memory bits is 100. this includes
* Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit.
*/
-static int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(at91sam7_handle_gpnvm_command)
{
flash_bank_t *bank;
int bit;
- u8 flashcmd;
- u32 status;
+ uint8_t flashcmd;
+ uint32_t status;
at91sam7_flash_bank_t *at91sam7_info;
int retval;
if (argc != 2)
{
- command_print(cmd_ctx, "at91sam7 gpnvm <bit> <set|clear>");
+ command_print(cmd_ctx, "at91sam7 gpnvm <bit> <set | clear>");
return ERROR_OK;
}
{
return ERROR_FLASH_BANK_INVALID;
}
- if (bank->driver != &at91sam7_flash)
+ if (strcmp(bank->driver->name, "at91sam7"))
{
command_print(cmd_ctx, "not an at91sam7 flash bank '%s'", args[0]);
return ERROR_FLASH_BANK_INVALID;
}
}
- bit = atoi(args[0]);
+ COMMAND_PARSE_NUMBER(int, args[0], bit);
if ((bit < 0) || (bit >= at91sam7_info->num_nvmbits))
{
command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[0], at91sam7_info->target_name);
/* Configure the flash controller timing */
at91sam7_read_clock_info(bank);
at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS);
-
+
if (at91sam7_flash_command(bank, flashcmd, bit) != ERROR_OK)
{
return ERROR_FLASH_OPERATION_FAILED;
/* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */
status = at91sam7_get_flash_status(bank->target, 0);
- LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n", flashcmd, bit, status);
+ LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value %d, status 0x%" PRIx32 " \n", flashcmd, bit, status);
/* check protect state */
at91sam7_protect_check(bank);
-
+
return ERROR_OK;
}
+
+static int at91sam7_register_commands(struct command_context_s *cmd_ctx)
+{
+ command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7",
+ NULL, COMMAND_ANY, NULL);
+
+ register_command(cmd_ctx, at91sam7_cmd, "gpnvm",
+ at91sam7_handle_gpnvm_command, COMMAND_EXEC,
+ "at91sam7 gpnvm <bit> set | clear, "
+ "set or clear one gpnvm bit");
+
+ return ERROR_OK;
+}
+
+flash_driver_t at91sam7_flash = {
+ .name = "at91sam7",
+ .register_commands = &at91sam7_register_commands,
+ .flash_bank_command = &at91sam7_flash_bank_command,
+ .erase = &at91sam7_erase,
+ .protect = &at91sam7_protect,
+ .write = &at91sam7_write,
+ .probe = &at91sam7_probe,
+ .auto_probe = &at91sam7_probe,
+ .erase_check = &at91sam7_erase_check,
+ .protect_check = &at91sam7_protect_check,
+ .info = &at91sam7_info,
+ };
Code Review / openocd.git / blobdiff