ioutil: drop the code, deprecated in v0.10.0

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 34168fdaa846ea67a6f27fd92b08fcc781b5cb5c..f52cfa7d923d8b109ff905b6df4f792b146f1770 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -8285,66 +8285,6 @@ with handlers for that event.
 @end quotation
 @end deffn
 
-@section I/O Utilities
-
-These commands are available when
-OpenOCD is built with @option{--enable-ioutil}.
-They are mainly useful on embedded targets,
-notably the ZY1000.
-Hosts with operating systems have complementary tools.
-
-@emph{Note:} there are several more such commands.
-
-@deffn Command append_file filename [string]*
-Appends the @var{string} parameters to
-the text file @file{filename}.
-Each string except the last one is followed by one space.
-The last string is followed by a newline.
-@end deffn
-
-@deffn Command cat filename
-Reads and displays the text file @file{filename}.
-@end deffn
-
-@deffn Command cp src_filename dest_filename
-Copies contents from the file @file{src_filename}
-into @file{dest_filename}.
-@end deffn
-
-@deffn Command ip
-@emph{No description provided.}
-@end deffn
-
-@deffn Command ls
-@emph{No description provided.}
-@end deffn
-
-@deffn Command mac
-@emph{No description provided.}
-@end deffn
-
-@deffn Command meminfo
-Display available RAM memory on OpenOCD host.
-Used in OpenOCD regression testing scripts.
-@end deffn
-
-@deffn Command peek
-@emph{No description provided.}
-@end deffn
-
-@deffn Command poke
-@emph{No description provided.}
-@end deffn
-
-@deffn Command rm filename
-@c "rm" has both normal and Jim-level versions??
-Unlinks the file @file{filename}.
-@end deffn
-
-@deffn Command trunc filename
-Removes all data in the file @file{filename}.
-@end deffn
-
 @anchor{memoryaccess}
 @section Memory access commands
 @cindex memory access
@@ -8866,29 +8806,6 @@ how the event caused trouble.
 
 @end deffn
 
-@deffn {Trace Port Driver} oocd_trace
-This driver isn't available unless OpenOCD was explicitly configured
-with the @option{--enable-oocd_trace} option. You probably don't want
-to configure it unless you've built the appropriate prototype hardware;
-it's @emph{proof-of-concept} software.
-
-Use the @option{oocd_trace} driver if you are configuring an ETM that's
-connected to an off-chip trace connector.
-
-@deffn {Config Command} {oocd_trace config} target tty
-Associates the ETM for @var{target} with a trace driver which
-collects data through the serial port @var{tty}.
-@end deffn
-
-@deffn Command {oocd_trace resync}
-Re-synchronizes with the capture clock.
-@end deffn
-
-@deffn Command {oocd_trace status}
-Reports whether the capture clock is locked or not.
-@end deffn
-@end deffn
-
 @anchor{armcrosstrigger}
 @section ARM Cross-Trigger Interface
 @cindex CTI