@example
# jlink interface
-interface jlink
+adapter driver jlink
@end example
Most adapters need a bit more configuration than that.
something like:
@example
-interface remote_bitbang
+adapter driver remote_bitbang
remote_bitbang_port 3335
remote_bitbang_host foobar
@end example
named mysocket:
@example
-interface remote_bitbang
+adapter driver remote_bitbang
remote_bitbang_port 0
remote_bitbang_host mysocket
@end example
classic ``Wiggler'' cable on LPT2 might look something like this:
@example
-interface parport
+adapter driver parport
parport_port 0x278
parport_cable wiggler
@end example
before erase starts.
@end deffn
-@deffn Command {flash fillw} address word length
+@deffn Command {flash filld} address double-word length
+@deffnx Command {flash fillw} address word length
@deffnx Command {flash fillh} address halfword length
@deffnx Command {flash fillb} address byte length
-Fills flash memory with the specified @var{word} (32 bits),
+Fills flash memory with the specified @var{double-word} (64 bits), @var{word} (32 bits),
@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
starting at @var{address} and continuing
for @var{length} units (word/halfword/byte).
@end deffn
@deffn {Flash Driver} stm32lx
-All members of the STM32L microcontroller families from STMicroelectronics
+All members of the STM32L0 and STM32L1 microcontroller families from STMicroelectronics
include internal flash and use ARM Cortex-M3 and Cortex-M0+ cores.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.