@cindex dongles
@cindex FTDI
@cindex wiggler
-@cindex zy1000
@cindex printer port
@cindex USB Adapter
@cindex RTCK
an adapter .... [snip]
In the OpenOCD case, this generally refers to @b{a small adapter} that
-attaches to your computer via USB or the parallel port. One
-exception is the Ultimate Solutions ZY1000, packaged as a small box you
-attach via an ethernet cable. The ZY1000 has the advantage that it does not
-require any drivers to be installed on the developer PC. It also has
-a built in web interface. It supports RTCK/RCLK or adaptive clocking
-and has a built-in relay to power cycle targets remotely.
+attaches to your computer via USB or the parallel port.
@section Choosing a Dongle
RTCK support (also known as ``adaptive clocking'')?
@end enumerate
-@section Stand-alone JTAG Probe
-
-The ZY1000 from Ultimate Solutions is technically not a dongle but a
-stand-alone JTAG probe that, unlike most dongles, doesn't require any drivers
-running on the developer's host computer.
-Once installed on a network using DHCP or a static IP assignment, users can
-access the ZY1000 probe locally or remotely from any host with access to the
-IP address assigned to the probe.
-The ZY1000 provides an intuitive web interface with direct access to the
-OpenOCD debugger.
-Users may also run a GDBSERVER directly on the ZY1000 to take full advantage
-of GCC & GDB to debug any distribution of embedded Linux or NetBSD running on
-the target.
-The ZY1000 supports RTCK & RCLK or adaptive clocking and has a built-in relay
-to power cycle the target remotely.
-
-For more information, visit:
-
-@b{ZY1000} See: @url{http://www.ultsol.com/index.php/component/content/article/8/210-zylin-zy1000-main}
-
@section USB FT2232 Based
There are many USB JTAG dongles on the market, many of them based
@end deffn
@end deffn
-@deffn {Interface Driver} {ZY1000}
-This is the Zylin ZY1000 JTAG debugger.
-@end deffn
-
-@quotation Note
-This defines some driver-specific commands,
-which are not currently documented here.
-@end quotation
-
-@deffn Command power [@option{on}|@option{off}]
-Turn power switch to target on/off.
-No arguments: print status.
-@end deffn
-
@deffn {Interface Driver} {bcm2835gpio}
This SoC is present in Raspberry Pi which is a cheap single-board computer
exposing some GPIOs on its expansion header.
@end quotation
@end deffn
-@section I/O Utilities
-
-These commands are available when
-OpenOCD is built with @option{--enable-ioutil}.
-They are mainly useful on embedded targets,
-notably the ZY1000.
-Hosts with operating systems have complementary tools.
-
-@emph{Note:} there are several more such commands.
-
-@deffn Command append_file filename [string]*
-Appends the @var{string} parameters to
-the text file @file{filename}.
-Each string except the last one is followed by one space.
-The last string is followed by a newline.
-@end deffn
-
-@deffn Command cat filename
-Reads and displays the text file @file{filename}.
-@end deffn
-
-@deffn Command cp src_filename dest_filename
-Copies contents from the file @file{src_filename}
-into @file{dest_filename}.
-@end deffn
-
-@deffn Command ip
-@emph{No description provided.}
-@end deffn
-
-@deffn Command ls
-@emph{No description provided.}
-@end deffn
-
-@deffn Command mac
-@emph{No description provided.}
-@end deffn
-
-@deffn Command meminfo
-Display available RAM memory on OpenOCD host.
-Used in OpenOCD regression testing scripts.
-@end deffn
-
-@deffn Command peek
-@emph{No description provided.}
-@end deffn
-
-@deffn Command poke
-@emph{No description provided.}
-@end deffn
-
-@deffn Command rm filename
-@c "rm" has both normal and Jim-level versions??
-Unlinks the file @file{filename}.
-@end deffn
-
-@deffn Command trunc filename
-Removes all data in the file @file{filename}.
-@end deffn
-
@anchor{memoryaccess}
@section Memory access commands
@cindex memory access
Code Review / openocd.git / blobdiff