rlink: fix reply counter to enable sending full buffers

[openocd.git] / configure.in

diff --git a/configure.in b/configure.in
index cb62c8590f482b66306ea0061f9bdac7039e2103..dfa1e8ffaf0a88614c306ffccfeb1ca3c1a393f9 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -1,5 +1,5 @@
 AC_PREREQ(2.60)
-AC_INIT([openocd], [0.5.0-dev],
+AC_INIT([openocd], [0.6.0-dev],
   [OpenOCD Mailing List <openocd-development@lists.berlios.de>])
 AC_CONFIG_SRCDIR([src/openocd.c])
 
@@ -472,6 +472,10 @@ AC_ARG_ENABLE(rlink,
   AS_HELP_STRING([--enable-rlink], [Enable building support for the Raisonance RLink JTAG Programmer]),
   [build_rlink=$enableval], [build_rlink=no])
 
+AC_ARG_ENABLE(ulink,
+  AS_HELP_STRING([--enable-ulink], [Enable building support for the Keil ULINK JTAG Programmer]),
+  [build_ulink=$enableval], [build_ulink=no])
+
 AC_ARG_ENABLE(arm-jtag-ew,
   AS_HELP_STRING([--enable-arm-jtag-ew], [Enable building support for the Olimex ARM-JTAG-EW Programmer]),
   [build_armjtagew=$enableval], [build_armjtagew=no])
@@ -750,6 +754,12 @@ else
   AC_DEFINE(BUILD_RLINK, 0, [0 if you don't want the RLink JTAG driver.])
 fi
 
+if test $build_ulink = yes; then
+  AC_DEFINE(BUILD_ULINK, 1, [1 if you want the ULINK JTAG driver.])
+else
+  AC_DEFINE(BUILD_ULINK, 0, [0 if you don't want the ULINK JTAG driver.])
+fi
+
 if test $build_armjtagew = yes; then
   AC_DEFINE(BUILD_ARMJTAGEW, 1, [1 if you want the ARM-JTAG-EW JTAG driver.])
 else
@@ -764,7 +774,7 @@ fi
 
 if test "$use_internal_jimtcl" = yes; then
   if test -f "$srcdir/jimtcl/configure.ac"; then
-    AX_CONFIG_SUBDIR_OPTION([jimtcl], [--with-jim-ext=nvp --disable-lineedit])
+    AX_CONFIG_SUBDIR_OPTION([jimtcl], [--with-jim-ext=nvp --disable-lineedit --disable-install-jim])
   else
     AC_MSG_ERROR([jimtcl not found, run git submodule init and git submodule update.])
   fi
@@ -863,14 +873,23 @@ if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes ; then
     AC_MSG_ERROR([Option: --with-ftd2xx-linux-tardir appears wrong, cannot find: ${FTD2XX_H}])
     fi
     CFLAGS="$CFLAGS -I$with_ftd2xx_linux_tardir"
-    FTD2XX_LDFLAGS="-L$with_ftd2xx_linux_tardir"
-    FTD2XX_LIB="-lftd2xx"
-    if test $with_ftd2xx_lib != shared; then
-      # Test #1 - Future proof - if/when ftdichip fixes their distro.
-      # Try it with the simple ".a" suffix.
-      FTD2XX_LIB="$with_ftd2xx_linux_tardir/static_lib/libftd2xx.a"
-      if test -f "${FTD2XX_LIB}"; then
-        FTD2XX_LDFLAGS="${FTD2XX_LDFLAGS}/static_lib"
+    if test $with_ftd2xx_lib = shared; then
+       FTD2XX_LDFLAGS="-L$with_ftd2xx_linux_tardir"
+       FTD2XX_LIB="-lftd2xx"
+    else
+      # Test #1 - v1.0.x
+      case "$host_cpu" in
+      i?86|x86_32)
+              dir=build/i386;;
+      amd64|x86_64)
+              dir=build/x86_64;;
+      *)
+              dir=none;;
+      esac
+      if test -f "$with_ftd2xx_linux_tardir/$dir/libftd2xx.a"; then
+          FTD2XX_LDFLAGS="-L$with_ftd2xx_linux_tardir/$dir"
+          # Also needs -lrt
+          FTD2XX_LIB="-lftd2xx -lrt"
       else
         # Test Number2.
         # Grr.. perhaps it exists as a version number?
@@ -1025,7 +1044,7 @@ fi
 # check for usb.h when a driver will require it
 build_usb=no
 if test $build_jlink = yes -o $build_vsllink = yes -o $build_usbprog = yes -o \
-  $build_rlink = yes -o $build_armjtagew = yes
+  $build_rlink = yes -o $build_ulink = yes -o $build_armjtagew = yes
 then
   AC_CHECK_HEADERS([usb.h],[],
   [AC_MSG_ERROR([usb.h is required to build some OpenOCD driver(s)])])
@@ -1056,6 +1075,7 @@ AM_CONDITIONAL(OOCD_TRACE, test $build_oocd_trace = yes)
 AM_CONDITIONAL(JLINK, test $build_jlink = yes)
 AM_CONDITIONAL(VSLLINK, test $build_vsllink = yes)
 AM_CONDITIONAL(RLINK, test $build_rlink = yes)
+AM_CONDITIONAL(ULINK, test $build_ulink = yes)
 AM_CONDITIONAL(ARMJTAGEW, test $build_armjtagew = yes)
 AM_CONDITIONAL(BUSPIRATE, test $build_buspirate = yes)
 AM_CONDITIONAL(USB, test $build_usb = yes)