AC_PREREQ(2.64)
-AC_INIT([openocd], [0.10.0-dev],
+AC_INIT([openocd], [0.10.0+dev],
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
AC_CONFIG_SRCDIR([src/openocd.c])
#include <helper/replacements.h>
])
-AC_LANG_C
+AC_LANG([C])
AC_PROG_CC
AC_PROG_CC_C99
AM_PROG_CC_C_O
m4_defun([_LT_AC_LANG_F77_CONFIG], [:])
m4_defun([_LT_AC_LANG_GCJ_CONFIG], [:])
AC_DISABLE_SHARED
-AC_PROG_LIBTOOL
+LT_INIT
AC_SUBST([LIBTOOL_DEPS])
dnl configure checks required for Jim files (these are obsolete w/ C99)
AC_SEARCH_LIBS([dlopen], [dl])
AC_CHECK_HEADERS([sys/socket.h])
-AC_CHECK_HEADERS([arpa/inet.h], [], [], [dnl
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-])
AC_CHECK_HEADERS([elf.h])
AC_CHECK_HEADERS([dirent.h])
AC_CHECK_HEADERS([fcntl.h])
-AC_CHECK_HEADERS([ifaddrs.h], [], [], [dnl
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-])
AC_CHECK_HEADERS([malloc.h])
AC_CHECK_HEADERS([netdb.h])
-AC_CHECK_HEADERS([netinet/in.h], [], [], [dnl
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-])
-AC_CHECK_HEADERS([netinet/tcp.h], [], [], [dnl
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-])
AC_CHECK_HEADERS([poll.h])
AC_CHECK_HEADERS([pthread.h])
AC_CHECK_HEADERS([strings.h])
AC_CHECK_HEADERS([sys/param.h])
AC_CHECK_HEADERS([sys/select.h])
AC_CHECK_HEADERS([sys/stat.h])
+AC_CHECK_HEADERS([sys/sysctl.h])
AC_CHECK_HEADERS([sys/time.h])
AC_CHECK_HEADERS([sys/types.h])
AC_CHECK_HEADERS([unistd.h])
-AC_CHECK_HEADERS([net/if.h], [], [], [dnl
+AC_CHECK_HEADERS([arpa/inet.h ifaddrs.h netinet/in.h netinet/tcp.h net/if.h], [], [], [dnl
#include <stdio.h>
#ifdef STDC_HEADERS
# include <stdlib.h>
AC_CHECK_FUNCS([gettimeofday])
AC_CHECK_FUNCS([usleep])
AC_CHECK_FUNCS([vasprintf])
+AC_CHECK_FUNCS([realpath])
# guess-rev.sh only exists in the repository, not in the released archives
AC_MSG_CHECKING([whether to build a release])
m4_define([USB1_ADAPTERS],
[[[ftdi], [MPSSE mode of FTDI based devices], [FTDI]],
- [[stlink], [ST-Link JTAG Programmer], [HLADAPTER_STLINK]],
+ [[stlink], [ST-Link Programmer], [HLADAPTER_STLINK]],
[[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]],
[[ulink], [Keil ULINK JTAG Programmer], [ULINK]],
[[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
- [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]]])
-
-m4_define([USB_ADAPTERS],
- [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
+ [[ft232r], [Bitbang mode of FT232R based devices], [FT232R]],
+ [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
+ [[xds110], [TI XDS110 Debug Probe], [XDS110]],
+ [[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
[[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]],
[[aice], [Andes JTAG Programmer], [AICE]]])
[[armjtagew], [Olimex ARM-JTAG-EW Programmer], [ARMJTAGEW]]])
m4_define([HIDAPI_ADAPTERS],
- [[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP]]])
+ [[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP]],
+ [[nulink], [Nu-Link Programmer], [HLADAPTER_NULINK]]])
+
+m4_define([HIDAPI_USB1_ADAPTERS],
+ [[[kitprog], [Cypress KitProg Programmer], [KITPROG]]])
m4_define([LIBFTDI_ADAPTERS],
[[[usb_blaster], [Altera USB-Blaster Compatible], [USB_BLASTER]],
[[presto], [ASIX Presto Adapter], [PRESTO]],
[[openjtag], [OpenJTAG Adapter], [OPENJTAG]]])
+m4_define([LIBGPIOD_ADAPTERS],
+ [[[linuxgpiod], [Linux GPIO bitbang through libgpiod], [LINUXGPIOD]]])
+
m4_define([LIBJAYLINK_ADAPTERS],
[[[jlink], [SEGGER J-Link Programmer], [JLINK]]])
+m4_define([PCIE_ADAPTERS],
+ [[[xlnx_pcie_xvc], [Xilinx XVC/PCIe], [XLNX_PCIE_XVC]]])
+
AC_ARG_ENABLE([doxygen-html],
AS_HELP_STRING([--disable-doxygen-html],
[gcc_werror=$enableval], [gcc_werror=$gcc_warnings])
# set default verbose options, overridden by following options
-debug_jtag_io=no
debug_usb_io=no
debug_usb_comms=no
AS_HELP_STRING([--enable-verbose],
[Enable verbose JTAG I/O messages (for debugging).]),
[
- debug_jtag_io=$enableval
debug_usb_io=$enableval
debug_usb_comms=$enableval
], [])
-AC_ARG_ENABLE([verbose_jtag_io],
- AS_HELP_STRING([--enable-verbose-jtag-io],
- [Enable verbose JTAG I/O messages (for debugging).]),
- [debug_jtag_io=$enableval], [])
-
AC_ARG_ENABLE([verbose_usb_io],
AS_HELP_STRING([--enable-verbose-usb-io],
[Enable verbose USB I/O messages (for debugging)]),
[Enable verbose USB communication messages (for debugging)]),
[debug_usb_comms=$enableval], [])
-AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]);
-AC_MSG_RESULT([$debug_jtag_io])
-AS_IF([test "x$debug_jtag_io" = "xyes"], [
- AC_DEFINE([_DEBUG_JTAG_IO_],[1], [Print verbose JTAG I/O messages])
-])
-
AC_MSG_CHECKING([whether to enable verbose USB I/O messages]);
AC_MSG_RESULT([$debug_usb_io])
AS_IF([test "x$debug_usb_io" = "xyes"], [
AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
[build_dummy=$enableval], [build_dummy=no])
+AC_ARG_ENABLE([rshim],
+ AS_HELP_STRING([--enable-rshim], [Enable building the rshim driver]),
+ [build_rshim=$enableval], [build_rshim=no])
+
m4_define([AC_ARG_ADAPTERS], [
m4_foreach([adapter], [$1],
[AC_ARG_ENABLE(ADAPTER_OPT([adapter]),
AC_ARG_ADAPTERS([
USB1_ADAPTERS,
- USB_ADAPTERS,
USB0_ADAPTERS,
HIDAPI_ADAPTERS,
+ HIDAPI_USB1_ADAPTERS,
LIBFTDI_ADAPTERS,
+ LIBGPIOD_ADAPTERS,
LIBJAYLINK_ADAPTERS
],[auto])
AS_HELP_STRING([--enable-jtag_vpi], [Enable building support for JTAG VPI]),
[build_jtag_vpi=$enableval], [build_jtag_vpi=no])
+AC_ARG_ENABLE([jtag_dpi],
+ AS_HELP_STRING([--enable-jtag_dpi], [Enable building support for JTAG DPI]),
+ [build_jtag_dpi=$enableval], [build_jtag_dpi=no])
+
AC_ARG_ENABLE([amtjtagaccel],
AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
[build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
[build_ioutil=$enableval], [build_ioutil=no])
+AS_CASE(["${host_cpu}"],
+ [arm*|aarch64], [
+ AC_ARG_ENABLE([bcm2835gpio],
+ AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
+ [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
+ AC_ARG_ENABLE([imx_gpio],
+ AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
+ [build_imx_gpio=$enableval], [build_imx_gpio=no])
+ ],
+ [
+ build_bcm2835gpio=no
+ build_imx_gpio=no
+])
+
AS_CASE(["${host_cpu}"],
[arm*], [
AC_ARG_ENABLE([ep93xx],
AC_ARG_ENABLE([at91rm9200],
AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
[build_at91rm9200=$enableval], [build_at91rm9200=no])
-
- AC_ARG_ENABLE([bcm2835gpio],
- AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
- [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
],
[
build_ep93xx=no
build_at91rm9200=no
- build_bcm2835gpio=no
])
AC_ARG_ENABLE([gw16012],
AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]),
[build_sysfsgpio=$enableval], [build_sysfsgpio=no])
+AC_ARG_ENABLE([xlnx_pcie_xvc],
+ AS_HELP_STRING([--enable-xlnx-pcie-xvc], [Enable building support for Xilinx XVC/PCIe.]),
+ [build_xlnx_pcie_xvc=$enableval], [build_xlnx_pcie_xvc=no])
+
+AS_CASE([$host_os],
+ [linux*], [],
+ [
+ AS_IF([test "x$build_sysfsgpio" = "xyes"], [
+ AC_MSG_ERROR([sysfsgpio is only available on linux])
+ ])
+
+ AS_IF([test "x$enable_linuxgpiod" = "xyes"], [
+ AC_MSG_ERROR([linuxgpiod is only available on linux])
+ ])
+
+ AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
+ AC_MSG_ERROR([xlnx_pcie_xvc is only available on linux])
+ ])
+
+ AS_CASE([$host_os], [freebsd*], [],
+ [
+ AS_IF([test "x$build_rshim" = "xyes"], [
+ AC_MSG_ERROR([build_rshim is only available on linux or freebsd])
+ ])
+ ])
+])
+
AC_ARG_ENABLE([minidriver_dummy],
AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]),
[build_minidriver_dummy=$enableval], [build_minidriver_dummy=no])
AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.])
])
+AS_IF([test "x$build_rshim" = "xyes"], [
+ AC_DEFINE([BUILD_RSHIM], [1], [1 if you want to debug BlueField SoC via rshim.])
+], [
+ AC_DEFINE([BUILD_RSHIM], [0], [0 if you don't want to debug BlueField SoC via rshim.])
+])
+
AS_IF([test "x$build_dummy" = "xyes"], [
build_bitbang=yes
AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.])
AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.])
])
+AS_IF([test "x$build_imx_gpio" = "xyes"], [
+ build_bitbang=yes
+ AC_DEFINE([BUILD_IMX_GPIO], [1], [1 if you want imx_gpio.])
+], [
+ AC_DEFINE([BUILD_IMX_GPIO], [0], [0 if you don't want imx_gpio.])
+])
+
AS_IF([test "x$parport_use_ppdev" = "xyes"], [
AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
], [
AC_DEFINE([BUILD_JTAG_VPI], [0], [0 if you don't want JTAG VPI.])
])
+AS_IF([test "x$build_jtag_dpi" = "xyes"], [
+ AC_DEFINE([BUILD_JTAG_DPI], [1], [1 if you want JTAG DPI.])
+], [
+ AC_DEFINE([BUILD_JTAG_DPI], [0], [0 if you don't want JTAG DPI.])
+])
+
+
AS_IF([test "x$build_amtjtagaccel" = "xyes"], [
AC_DEFINE([BUILD_AMTJTAGACCEL], [1], [1 if you want the Amontec JTAG-Accelerator driver.])
], [
AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
])
+AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
+ build_xlnx_pcie_xvc=yes
+ AC_DEFINE([BUILD_XLNX_PCIE_XVC], [1], [1 if you want the Xilinx XVC/PCIe driver.])
+], [
+ AC_DEFINE([BUILD_XLNX_PCIE_XVC], [0], [0 if you don't want Xilinx XVC/PCIe driver.])
+])
+
PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
use_libusb1=yes
AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
PKG_CHECK_MODULES([LIBUSB0], [libusb], [use_libusb0=yes], [use_libusb0=no])
+PKG_CHECK_MODULES([CAPSTONE], [capstone], [have_capstone=yes],
+ [have_capstone=no])
+
+AS_IF([test "x$have_capstone" = "xyes"], [
+ AC_DEFINE([HAVE_CAPSTONE], [1], [1 if you have captone disassembly framework.])
+], [
+ AC_DEFINE([HAVE_CAPSTONE], [0], [0 if you don't have captone disassembly framework.])
+])
+
for hidapi_lib in hidapi hidapi-hidraw hidapi-libusb; do
PKG_CHECK_MODULES([HIDAPI],[$hidapi_lib],[
use_hidapi=yes
PKG_CHECK_MODULES([LIBFTDI], [libftdi], [use_libftdi=yes], [use_libftdi=no])
])
-PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.1],
+PKG_CHECK_MODULES([LIBGPIOD], [libgpiod], [use_libgpiod=yes], [use_libgpiod=no])
+
+PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.2],
[use_libjaylink=yes], [use_libjaylink=no])
m4_define([PROCESS_ADAPTERS], [
m4_foreach([adapter], [$1], [
+ AS_IF([test "x$build_zy1000" = "xyes"], [
+ ADAPTER_VAR([adapter])=no
+ ])
AS_IF([test $2], [
AS_IF([test "x$ADAPTER_VAR([adapter])" != "xno"], [
AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [1], [1 if you want the ]ADAPTER_DESC([adapter]).)
])
PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
-PROCESS_ADAPTERS([USB_ADAPTERS], ["x$use_libusb1" = "xyes" -o "x$use_libusb0" = "xyes"], [libusb-1.x or libusb-0.1])
PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1])
PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
+PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
PROCESS_ADAPTERS([LIBFTDI_ADAPTERS], ["x$use_libftdi" = "xyes"], [libftdi])
-PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_libusb1" = "xyes" -a "x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libusb-1.x or libjaylink-0.1])
+PROCESS_ADAPTERS([LIBGPIOD_ADAPTERS], ["x$use_libgpiod" = "xyes"], [libgpiod])
+PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libjaylink-0.2])
AS_IF([test "x$build_openjtag" = "xyes"], [
AS_IF([test "x$use_libusb1" != "xyes" -a "x$use_libusb0" != "xyes"], [
])
])
-AS_IF([test "x$enable_stlink" != "xno" -o "x$enable_ti_icdi" != "xno"], [
+AS_IF([test "x$enable_linuxgpiod" != "xno"], [
+ build_bitbang=yes
+])
+
+AS_IF([test "x$enable_stlink" != "xno" -o "x$enable_ti_icdi" != "xno" -o "x$enable_nulink" != "xno"], [
AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.])
+ AM_CONDITIONAL([HLADAPTER], [true])
], [
AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you want the High Level JTAG driver.])
+ AM_CONDITIONAL([HLADAPTER], [false])
])
-AM_CONDITIONAL([HLADAPTER], [test "x$enable_stlink" != "xno" -o "x$enable_ti_icdi" != "xno"])
+AM_CONDITIONAL([HLADAPTER_STLINK], [test "x$enable_stlink" != "xno"])
+AM_CONDITIONAL([HLADAPTER_ICDI], [test "x$enable_ti_icdi" != "xno"])
+AM_CONDITIONAL([HLADAPTER_NULINK], [test "x$enable_nulink" != "xno"])
AS_IF([test "x$enable_jlink" != "xno"], [
AS_IF([test "x$use_internal_libjaylink" = "xyes"], [
AM_CONDITIONAL([IOUTIL], [test "x$build_ioutil" = "xyes"])
AM_CONDITIONAL([AT91RM9200], [test "x$build_at91rm9200" = "xyes"])
AM_CONDITIONAL([BCM2835GPIO], [test "x$build_bcm2835gpio" = "xyes"])
+AM_CONDITIONAL([IMX_GPIO], [test "x$build_imx_gpio" = "xyes"])
AM_CONDITIONAL([BITBANG], [test "x$build_bitbang" = "xyes"])
AM_CONDITIONAL([JTAG_VPI], [test "x$build_jtag_vpi" = "xyes" -o "x$build_jtag_vpi" = "xyes"])
+AM_CONDITIONAL([JTAG_DPI], [test "x$build_jtag_dpi" = "xyes" -o "x$build_jtag_dpi" = "xyes"])
AM_CONDITIONAL([USB_BLASTER_DRIVER], [test "x$enable_usb_blaster" != "xno" -o "x$enable_usb_blaster_2" != "xno"])
AM_CONDITIONAL([AMTJTAGACCEL], [test "x$build_amtjtagaccel" = "xyes"])
AM_CONDITIONAL([GW16012], [test "x$build_gw16012" = "xyes"])
AM_CONDITIONAL([REMOTE_BITBANG], [test "x$build_remote_bitbang" = "xyes"])
AM_CONDITIONAL([BUSPIRATE], [test "x$build_buspirate" = "xyes"])
AM_CONDITIONAL([SYSFSGPIO], [test "x$build_sysfsgpio" = "xyes"])
+AM_CONDITIONAL([XLNX_PCIE_XVC], [test "x$build_xlnx_pcie_xvc" = "xyes"])
AM_CONDITIONAL([USE_LIBUSB0], [test "x$use_libusb0" = "xyes"])
AM_CONDITIONAL([USE_LIBUSB1], [test "x$use_libusb1" = "xyes"])
AM_CONDITIONAL([IS_CYGWIN], [test "x$is_cygwin" = "xyes"])
AM_CONDITIONAL([IS_DARWIN], [test "x$is_darwin" = "xyes"])
AM_CONDITIONAL([BITQ], [test "x$build_bitq" = "xyes"])
AM_CONDITIONAL([USE_LIBFTDI], [test "x$use_libftdi" = "xyes"])
+AM_CONDITIONAL([USE_LIBGPIOD], [test "x$use_libgpiod" = "xyes"])
AM_CONDITIONAL([USE_HIDAPI], [test "x$use_hidapi" = "xyes"])
AM_CONDITIONAL([USE_LIBJAYLINK], [test "x$use_libjaylink" = "xyes"])
+AM_CONDITIONAL([RSHIM], [test "x$build_rshim" = "xyes"])
+AM_CONDITIONAL([HAVE_CAPSTONE], [test "x$have_capstone" = "xyes"])
AM_CONDITIONAL([MINIDRIVER], [test "x$build_minidriver" = "xyes"])
AM_CONDITIONAL([MINIDRIVER_DUMMY], [test "x$build_minidriver_dummy" = "xyes"])
GCC_WARNINGS="${GCC_WARNINGS} -Werror"
])
-# overide default gcc cflags
+# override default gcc cflags
AS_IF([test "x$gcc_warnings" = "xyes"], [
AC_SUBST([GCC_WARNINGS], [$GCC_WARNINGS])
])
AC_CONFIG_FILES([
Makefile
- src/Makefile
- src/helper/Makefile
- src/jtag/Makefile
- src/jtag/drivers/Makefile
- src/jtag/drivers/usb_blaster/Makefile
- src/jtag/hla/Makefile
- src/jtag/aice/Makefile
- src/transport/Makefile
- src/target/openrisc/Makefile
- src/xsvf/Makefile
- src/svf/Makefile
- src/target/Makefile
- src/rtos/Makefile
- src/server/Makefile
- src/flash/Makefile
- src/flash/nor/Makefile
- src/flash/nand/Makefile
- src/pld/Makefile
- doc/Makefile
])
AC_OUTPUT
echo
echo OpenOCD configuration summary
echo --------------------------------------------------
-m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
- HIDAPI_ADAPTERS, LIBFTDI_ADAPTERS, LIBJAYLINK_ADAPTERS],
+m4_foreach([adapter], [USB1_ADAPTERS, USB0_ADAPTERS,
+ HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
+ LIBGPIOD_ADAPTERS,
+ LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS],
[s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))
AS_CASE([$ADAPTER_VAR([adapter])],
[auto], [
])
])
echo
+
+AS_IF([test "x$build_oocd_trace" = "xyes"], [
+ echo 'WARNING! Deprecated configure option (--enable-oocd_trace)'
+ echo 'The oocd_trace driver is deprecated and will be removed in the next release.'
+ echo 'If you regularly use this driver, please report to the OpenOCD Mailing List.'
+ echo
+])
+
+AS_IF([test "x$build_zy1000" = "xyes" -o "x$build_zy1000_master" = "xyes"], [
+ echo 'WARNING! Deprecated configure option (--enable-zy1000, --enable-zy1000-master)'
+ echo 'Support for the ZY1000 platform is deprecated and will be removed in the next'
+ echo 'release. If you regularly use this platform, please report to the OpenOCD'
+ echo 'Mailing List.'
+ echo
+])
+
+AS_IF([test "x$build_ioutil" = "xyes"], [
+ echo 'WARNING! Deprecated configure option (--enable-ioutil)'
+ echo 'Support for the ioutil functions is deprecated and will be removed in the next'
+ echo 'release. If you regularly depend on this functionality, please report to the'
+ echo 'OpenOCD Mailing List.'
+ echo
+])
Code Review / openocd.git / blobdiff