There are still few adapter_khz, ftdi_location, jtag_nsrst_delay
and xds110_serial strolling around ...
Change-Id: I3e8503dcc3875e3c92e6536f3d455a5e448d51ff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6270
Tested-by: jenkins
# https://raw.githubusercontent.com/dergraaf/busblaster_v4/master/ktlink/ktlink.svf
#
# To reprogram the on-board CPLD do:
# https://raw.githubusercontent.com/dergraaf/busblaster_v4/master/ktlink/ktlink.svf
#
# To reprogram the on-board CPLD do:
-# openocd -f board/dp_busblaster_v4.cfg -c "adapter_khz 1000; init; svf <path_to_svf>; shutdown"
+# openocd -f board/dp_busblaster_v4.cfg -c "adapter speed 1000; init; svf <path_to_svf>; shutdown"
#
source [find interface/ftdi/dp_busblaster.cfg]
#
source [find interface/ftdi/dp_busblaster.cfg]
jtag_rclk 1000
$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
jtag_rclk 1000
$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
#jtag_ntrst_delay 200
$_TARGETNAME configure -event "reset-assert" {
#jtag_ntrst_delay 200
$_TARGETNAME configure -event "reset-assert" {
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi_layout_init 0x0008 0x000b
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi_layout_init 0x0008 0x000b
+# adapter usb location 1:8
reset_config none
transport select jtag
reset_config none
transport select jtag
# ADP-Corvette-F1 R2.0
# http://www.andestech.com/en/products-solutions/andeshape-platforms/corvette-f1-r2/
# ADP-Corvette-F1 R2.0
# http://www.andestech.com/en/products-solutions/andeshape-platforms/corvette-f1-r2/
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
adapter driver ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
# Use this to distinguish multiple boards by topology
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
# Use this to distinguish multiple boards by topology
+#adapter usb location 5:1
# sampling on falling edge generally seems to work and accelerates things but
# is not fully tested
#ftdi_tdo_sample_edge falling
# sampling on falling edge generally seems to work and accelerates things but
# is not fully tested
#ftdi_tdo_sample_edge falling
#
source [find interface/ftdi/snps_sdp.cfg]
#
source [find interface/ftdi/snps_sdp.cfg]
# ARCs supports only JTAG.
transport select jtag
# ARCs supports only JTAG.
transport select jtag
# Use serial number option to use a specific XDS110
# when more than one are connected to the host.
# Use serial number option to use a specific XDS110
# when more than one are connected to the host.
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)