stm32: add stm32 xl family flash support

[openocd.git] / tcl / target / stm32.cfg

diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg
index 86e6ebb89437559bea0edf8551046822a262492d..eef12699218962045fd2b71c1ad24a647fce9a37 100644 (file)
--- a/tcl/target/stm32.cfg
+++ b/tcl/target/stm32.cfg
@@ -52,18 +52,22 @@ if { [info exists BSTAPID ] } {
   set _BSTAPID4 0x06414041
   # Connectivity line devices, Rev A and Rev Z
   set _BSTAPID5 0x06418041
+  # XL line devices, Rev A
+  set _BSTAPID6 0x06430041
 }
 jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \
        -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 \
-       -expected-id $_BSTAPID4 -expected-id $_BSTAPID5
+       -expected-id $_BSTAPID4 -expected-id $_BSTAPID5 \
+       -expected-id $_BSTAPID6
 
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
+# flash size will be probed
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32x 0 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME stm32x 0x08000000 0 0 0 $_TARGETNAME
 
 # if srst is not fitted use SYSRESETREQ to
 # perform a soft reset