update IXP42x target / XBA board config

[openocd.git] / tcl / target / lpc2294.cfg

diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg
index 8ed6352cda52a1f9a2698b2b811b3539493a77c7..ecf0599884ad1dc9ade5bfd3fe8e15ca804ded3b 100644 (file)
--- a/tcl/target/lpc2294.cfg
+++ b/tcl/target/lpc2294.cfg
@@ -14,8 +14,7 @@ if { [info exists CPUTAPID ] } {
 adapter_nsrst_delay 200
 jtag_ntrst_delay 200
 
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst
 
 #jtag scan chain
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
@@ -28,6 +27,3 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-a
 # flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum
-
-# For more information about the configuration files, take a look at:
-# openocd.texi