tcl/target: add SPDX tag

[openocd.git] / tcl / target / fm3.cfg

diff --git a/tcl/target/fm3.cfg b/tcl/target/fm3.cfg
index a0610ce17724e5d7c924757c16519776c3ef6276..0caf629da4a061e39c8d21d5d28c6cb3a0ab937d 100644 (file)
--- a/tcl/target/fm3.cfg
+++ b/tcl/target/fm3.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # MB9BF506
 # Fujitsu Cortex-M3 with 512kB Flash and 64kB RAM
 
@@ -22,7 +24,7 @@ if { [info exists CPUTAPID] } {
 }
 
 # delays on reset lines
-adapter_nsrst_delay 100
+adapter srst delay 100
 if {[using_jtag]} {
    jtag_ntrst_delay 100
 }
@@ -36,16 +38,16 @@ dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
-# MB9BF506 has 64kB of SRAM on its main system bus 
+# MB9BF506 has 64kB of SRAM on its main system bus
 $_TARGETNAME configure -work-area-phys 0x1FFF8000 -work-area-size 0x10000 -work-area-backup 0
 
-# MB9BF506 has 512kB internal FLASH 
+# MB9BF506 has 512kB internal FLASH
 
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
 
 # 4MHz / 6 = 666kHz, so use 500
-adapter_khz 500
+adapter speed 500
 
 if {![using_hla]} {
    # if srst is not fitted use SYSRESETREQ to