Dick Hollenbeck <dick@softplc.com> moved stuff into openocd.c - should never have...

[openocd.git] / src / target / target / str710.cfg

diff --git a/src/target/target/str710.cfg b/src/target/target/str710.cfg
index ebf6b9b2341d3763a2f1e7191c74ed80ebf40153..2d9d2fc4b052dfb99ec6a40ea119d67e8f902e99 100644 (file)
--- a/src/target/target/str710.cfg
+++ b/src/target/target/str710.cfg
@@ -1,21 +1,45 @@
+#start slow, speed up after reset
+jtag_khz 10
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME str710
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {        
+   set  _CPUTAPID $CPUTAPID    
+} else {        
+   set  _CPUTAPID 0x3f0f0f0f
+}
+
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
 
 #jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
 
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi
-run_and_halt_time 0 30
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
-target_script 0 gdb_program_config event/str710_program.script
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+$_TARGETNAME configure -event reset-start { jtag_khz 10 }
+$_TARGETNAME configure -event reset-init { jtag_khz 6000 }
+$_TARGETNAME configure -event gdb-flash-erase-start {
+       flash protect 0 0 7 off
+       flash protect 1 0 1 off
+}
 
-working_area 0 0x2000C000 0x4000 nobackup
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0
 
 #flash bank str7x <base> <size> 0 0 <target#> <variant>
 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
+flash bank str7x 0x400C0000 0x00004000 0 0 0 STR71x
 
 # For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+# openocd.texi