- renamed x7926 driver to aduc702x to match other flash drivers

[openocd.git] / src / target / target / lpc2148.cfg

diff --git a/src/target/target/lpc2148.cfg b/src/target/target/lpc2148.cfg
index 68652b18be8600c21963ab581f10e8a14eb7004c..79ec9ecb1a983458cc6250821e3d090bb9f32fd8 100644 (file)
--- a/src/target/target/lpc2148.cfg
+++ b/src/target/target/lpc2148.cfg
@@ -2,26 +2,27 @@
 jtag_nsrst_delay 200
 jtag_ntrst_delay 200
 
+# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate 
+# JTAG, power-on reset is not enough, i.e. you need to perform a
+# reset before being able to talk to the LPC2148, attach is not
+# possible.
+
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
 
-#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
-jtag_reset 1 1
-jtag_reset 0 0
-
 #jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag_device 4 0x1 0xf 0xe
 
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
+target arm7tdmi little 0 arm7tdmi-s_r4
+[new_target_name] configure -event old-post_reset {} {
+       # Force target into ARM state
+       soft_reset_halt
+       #do not remap 0x0000-0x0020 to anything but the flash
+       mwb 0xE01FC040 0x01 
+       
+}
 
 working_area 0 0x40000000 0x4000 nobackup
 
 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger