* *
* Copyright (C) 2009 by David N. Claffey <dnclaffey@gmail.com> *
* *
+ * Copyright (C) 2011 by Drasko DRASKOVIC *
+ * drasko.draskovic@gmail.com *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
/* read ejtag control reg */
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL);
- mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
+ retval = mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
+ if (retval != ERROR_OK)
+ return retval;
/* clear this bit before handling polling
* as after reset registers will read zero */
ejtag_ctrl = ejtag_info->ejtag_ctrl & ~EJTAG_CTRL_ROCC;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL);
- mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
+ retval = mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
+ if (retval != ERROR_OK)
+ return retval;
LOG_DEBUG("Reset Detected");
}
uint32_t ejtag_ctrl = ejtag_info->ejtag_ctrl | EJTAG_CTRL_PRRST | EJTAG_CTRL_PERRST;
LOG_DEBUG("Using EJTAG reset (PRRST) to reset processor...");
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL);
- mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
+ mips_ejtag_drscan_32_out(ejtag_info, ejtag_ctrl);
}
}
{
return retval;
}
+
+ /**
+ * target_read_memory() gets us data in _target_ endianess.
+ * If we want to use this data on the host for comparisons with some macros
+ * we must first transform it to _host_ endianess using target_buffer_get_u32().
+ */
+ current_instr = target_buffer_get_u32(target, (uint8_t *)¤t_instr);
+
if (current_instr == MIPS32_SDBBP)
{
if ((retval = target_write_memory(target, breakpoint->address, 4, 1,
{
return retval;
}
-
+ current_instr = target_buffer_get_u16(target, (uint8_t *)¤t_instr);
if (current_instr == MIPS16_SDBBP)
{
if ((retval = target_write_memory(target, breakpoint->address, 2, 1,
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
+ /* since we don't know if buffer is aligned, we allocate new mem that is always aligned */
+ void *t = NULL;
+
+ if (size > 1)
+ {
+ t = malloc(count * size * sizeof(uint8_t));
+ if (t == NULL)
+ {
+ LOG_ERROR("Out of memory");
+ return ERROR_FAIL;
+ }
+ }
+ else
+ {
+ t = buffer;
+ }
+
/* if noDMA off, use DMAACC mode for memory read */
int retval;
if (ejtag_info->impcode & EJTAG_IMP_NODMA)
- retval = mips32_pracc_read_mem(ejtag_info, address, size, count, (void *)buffer);
+ retval = mips32_pracc_read_mem(ejtag_info, address, size, count, t);
else
- retval = mips32_dmaacc_read_mem(ejtag_info, address, size, count, (void *)buffer);
- if (ERROR_OK != retval)
- return retval;
+ retval = mips32_dmaacc_read_mem(ejtag_info, address, size, count, t);
- return ERROR_OK;
+ /* mips32_..._read_mem with size 4/2 returns uint32_t/uint16_t in host */
+ /* endianness, but byte array should represent target endianness */
+ if (ERROR_OK == retval)
+ {
+ switch(size)
+ {
+ case 4:
+ target_buffer_set_u32_array(target,buffer,count,t);
+ break;
+ case 2:
+ target_buffer_set_u16_array(target,buffer,count,t);
+ break;
+ }
+ }
+
+ if ((size > 1) && (t != NULL))
+ free(t);
+
+ return retval;
}
static int mips_m4k_write_memory(struct target *target, uint32_t address,
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
+ /** correct endianess if we have word or hword access */
+ void *t = NULL;
+ if (size > 1)
+ {
+ /* mips32_..._write_mem with size 4/2 requires uint32_t/uint16_t in host */
+ /* endianness, but byte array represents target endianness */
+ t = malloc(count * size * sizeof(uint8_t));
+ if (t == NULL)
+ {
+ LOG_ERROR("Out of memory");
+ return ERROR_FAIL;
+ }
+
+ switch(size)
+ {
+ case 4:
+ target_buffer_get_u32_array(target,buffer,count,(uint32_t*)t);
+ break;
+ case 2:
+ target_buffer_get_u16_array(target,buffer,count,(uint16_t*)t);
+ break;
+ }
+ buffer = t;
+ }
+
/* if noDMA off, use DMAACC mode for memory write */
+ int retval;
if (ejtag_info->impcode & EJTAG_IMP_NODMA)
- return mips32_pracc_write_mem(ejtag_info, address, size, count, (void *)buffer);
+ retval = mips32_pracc_write_mem(ejtag_info, address, size, count, (void *)buffer);
else
- return mips32_dmaacc_write_mem(ejtag_info, address, size, count, (void *)buffer);
+ retval = mips32_dmaacc_write_mem(ejtag_info, address, size, count, (void *)buffer);
+
+ if (t != NULL)
+ free(t);
+
+ if (ERROR_OK != retval)
+ return retval;
+
+ return ERROR_OK;
}
static int mips_m4k_init_target(struct command_context *cmd_ctx,
ejtag_info->fast_access_save = -1;
}
- uint8_t * t = NULL;
-
- /* TAP data register is loaded LSB first (little endian) */
- if (target->endianness == TARGET_BIG_ENDIAN)
+ /* mips32_pracc_fastdata_xfer requires uint32_t in host endianness, */
+ /* but byte array represents target endianness */
+ uint32_t *t = NULL;
+ t = malloc(count * sizeof(uint32_t));
+ if (t == NULL)
{
- t = malloc(count * sizeof(uint32_t));
- if (t == NULL)
- {
- LOG_ERROR("Out of memory");
- return ERROR_FAIL;
- }
-
- uint32_t i, t32;
- for(i = 0; i < (count * 4); i += 4)
- {
- t32 = be_to_h_u32((uint8_t *) &buffer[i]);
- h_u32_to_le(&t[i], t32);
- }
-
- buffer = t;
+ LOG_ERROR("Out of memory");
+ return ERROR_FAIL;
}
+ target_buffer_get_u32_array(target,buffer,count,t);
+
retval = mips32_pracc_fastdata_xfer(ejtag_info, mips32->fast_data_area, write_t, address,
- count, (uint32_t*) (void *)buffer);
+ count, t);
if (t != NULL)
free(t);
return retval;
}
+static int mips_m4k_verify_pointer(struct command_context *cmd_ctx,
+ struct mips_m4k_common *mips_m4k)
+{
+ if (mips_m4k->common_magic != MIPSM4K_COMMON_MAGIC) {
+ command_print(cmd_ctx, "target is not an MIPS_M4K");
+ return ERROR_TARGET_INVALID;
+ }
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(mips_m4k_handle_cp0_command)
+{
+ int retval;
+ struct target *target = get_current_target(CMD_CTX);
+ struct mips_m4k_common *mips_m4k = target_to_m4k(target);
+ struct mips_ejtag *ejtag_info = &mips_m4k->mips32.ejtag_info;
+
+ retval = mips_m4k_verify_pointer(CMD_CTX, mips_m4k);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (target->state != TARGET_HALTED)
+ {
+ command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
+ return ERROR_OK;
+ }
+
+ /* two or more argument, access a single register/select (write if third argument is given) */
+ if (CMD_ARGC < 2)
+ {
+ command_print(CMD_CTX, "command requires more arguments.");
+ }
+ else
+ {
+ uint32_t cp0_reg, cp0_sel;
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], cp0_reg);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], cp0_sel);
+
+ if (CMD_ARGC == 2)
+ {
+ uint32_t value;
+
+ if ((retval = mips32_cp0_read(ejtag_info, &value, cp0_reg, cp0_sel)) != ERROR_OK)
+ {
+ command_print(CMD_CTX,
+ "couldn't access reg %" PRIi32,
+ cp0_reg);
+ return ERROR_OK;
+ }
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ command_print(CMD_CTX, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32,
+ cp0_reg, cp0_sel, value);
+ }
+ else if (CMD_ARGC == 3)
+ {
+ uint32_t value;
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], value);
+ if ((retval = mips32_cp0_write(ejtag_info, value, cp0_reg, cp0_sel)) != ERROR_OK)
+ {
+ command_print(CMD_CTX,
+ "couldn't access cp0 reg %" PRIi32 ", select %" PRIi32,
+ cp0_reg, cp0_sel);
+ return ERROR_OK;
+ }
+ command_print(CMD_CTX, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32,
+ cp0_reg, cp0_sel, value);
+ }
+ }
+
+ return ERROR_OK;
+}
+
+static const struct command_registration mips_m4k_exec_command_handlers[] = {
+ {
+ .name = "cp0",
+ .handler = mips_m4k_handle_cp0_command,
+ .mode = COMMAND_EXEC,
+ .usage = "regnum [value]",
+ .help = "display/modify cp0 register",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+const struct command_registration mips_m4k_command_handlers[] = {
+ {
+ .chain = mips32_command_handlers,
+ },
+ {
+ .name = "mips_m4k",
+ .mode = COMMAND_ANY,
+ .help = "mips_m4k command group",
+ .chain = mips_m4k_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
struct target_type mips_m4k_target =
{
.name = "mips_m4k",
.add_watchpoint = mips_m4k_add_watchpoint,
.remove_watchpoint = mips_m4k_remove_watchpoint,
+ .commands = mips_m4k_command_handlers,
.target_create = mips_m4k_target_create,
.init_target = mips_m4k_init_target,
.examine = mips_m4k_examine,