lm3s3748 config file
[openocd.git] / src / target / cortex_m3.c
index b330fee3c5304945c68834b0f36cb66a1379e03a..12574c66af757f8ab0f4fbd57f9d872cba5ef891 100644 (file)
@@ -47,11 +47,16 @@ void cortex_m3_enable_breakpoints(struct target_s *target);
 void cortex_m3_enable_watchpoints(struct target_s *target);
 int cortex_m3_target_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct target_s *target);
 int cortex_m3_init_target(struct command_context_s *cmd_ctx, struct target_s *target);
-int cortex_m3_quit();
+int cortex_m3_quit(void);
 int cortex_m3_load_core_reg_u32(target_t *target, enum armv7m_regtype type, u32 num, u32 *value);
 int cortex_m3_store_core_reg_u32(target_t *target, enum armv7m_regtype type, u32 num, u32 value);
 int cortex_m3_target_request_data(target_t *target, u32 size, u8 *buffer);
-int cortex_m3_examine(struct command_context_s *cmd_ctx, struct target_s *target);
+int cortex_m3_examine(struct target_s *target);
+
+#ifdef ARMV7_GDB_HACKS
+extern u8 armv7m_gdb_dummy_cpsr_value[];
+extern reg_t armv7m_gdb_dummy_cpsr_reg;
+#endif
 
 target_type_t cortexm3_target =
 {
@@ -76,6 +81,7 @@ target_type_t cortexm3_target =
        .write_memory = cortex_m3_write_memory,
        .bulk_write_memory = cortex_m3_bulk_write_memory,
        .checksum_memory = armv7m_checksum_memory,
+       .blank_check_memory = armv7m_blank_check_memory,
        
        .run_algorithm = armv7m_run_algorithm,
        
@@ -313,7 +319,15 @@ int cortex_m3_debug_entry(target_t *target)
        }
 
        xPSR = buf_get_u32(armv7m->core_cache->reg_list[ARMV7M_xPSR].value, 0, 32);
-       
+
+#ifdef ARMV7_GDB_HACKS
+       /* copy real xpsr reg for gdb, setting thumb bit */
+       buf_set_u32(armv7m_gdb_dummy_cpsr_value, 0, 32, xPSR);
+       buf_set_u32(armv7m_gdb_dummy_cpsr_value, 5, 1, 1);
+       armv7m_gdb_dummy_cpsr_reg.valid = armv7m->core_cache->reg_list[ARMV7M_xPSR].valid;
+       armv7m_gdb_dummy_cpsr_reg.dirty = armv7m->core_cache->reg_list[ARMV7M_xPSR].dirty;
+#endif
+
        /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
        if (xPSR & 0xf00)
        {
@@ -509,7 +523,7 @@ int cortex_m3_soft_reset_halt(struct target_s *target)
                                LOG_DEBUG("waiting for system reset-halt, dcb_dhcsr 0x%x, %i ms", dcb_dhcsr, timeout);
                }
                timeout++;
-               usleep(1000);
+               alive_sleep(1);
        }
                
        return ERROR_OK;
@@ -660,6 +674,7 @@ int cortex_m3_assert_reset(target_t *target)
        armv7m_common_t *armv7m = target->arch_info;
        cortex_m3_common_t *cortex_m3 = armv7m->arch_info;
        swjdp_common_t *swjdp = &cortex_m3->swjdp_info;
+       int assert_srst = 1;
        
        LOG_DEBUG("target->state: %s", target_state_strings[target->state]);
        
@@ -676,7 +691,7 @@ int cortex_m3_assert_reset(target_t *target)
                
        ahbap_write_system_u32(swjdp, DCB_DCRDR, 0 );
        
-       if (target->reset_mode == RESET_RUN)
+       if (!target->reset_halt)
        {
                /* Set/Clear C_MASKINTS in a separate operation */
                if (cortex_m3->dcb_dhcsr & C_MASKINTS)
@@ -693,13 +708,53 @@ int cortex_m3_assert_reset(target_t *target)
                ahbap_write_system_atomic_u32(swjdp, DCB_DEMCR, TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET );
        }
        
-       if (jtag_reset_config & RESET_SRST_PULLS_TRST)
+       /* following hack is to handle luminary reset
+        * when srst is asserted the luminary device seesm to also clear the debug registers
+        * which does not match the armv7 debug TRM */
+               
+       if (strcmp(cortex_m3->variant, "lm3s") == 0)
        {
-               jtag_add_reset(1, 1);
+               /* get revision of lm3s target, only early silicon has this issue
+                * Fury Rev B, DustDevil Rev B, Tempest all ok */
+               
+               u32 did0;
+               
+               if (target_read_u32(target, 0x400fe000, &did0) == ERROR_OK)
+               {
+                       switch ((did0 >> 16) & 0xff)
+                       {
+                               case 0:
+                                       /* all Sandstorm suffer issue */
+                                       assert_srst = 0;
+                                       break;
+                               
+                               case 1:
+                               case 3:
+                                       /* only Fury/DustDevil rev A suffer reset problems */
+                                       if (((did0 >> 8) & 0xff) == 0)
+                                               assert_srst = 0;
+                                       break;
+                       }
+               }
+       }
+       
+       if (assert_srst)
+       {
+               /* default to asserting srst */
+               if (jtag_reset_config & RESET_SRST_PULLS_TRST)
+               {
+                       jtag_add_reset(1, 1);
+               }
+               else
+               {
+                       jtag_add_reset(0, 1);
+               }
        }
        else
        {
-               jtag_add_reset(0, 1);
+               /* this causes the luminary device to reset using the watchdog */
+               ahbap_write_system_atomic_u32(swjdp, NVIC_AIRCR, AIRCR_VECTKEY | AIRCR_SYSRESETREQ );
+               LOG_DEBUG("Using Luminary Reset: SYSRESETREQ");
        }
        
        target->state = TARGET_RESET;
@@ -707,6 +762,13 @@ int cortex_m3_assert_reset(target_t *target)
        
        armv7m_invalidate_core_regs(target);
 
+    if (target->reset_halt)
+    {
+       int retval;
+               if ((retval = target_halt(target))!=ERROR_OK)
+                       return retval;
+    }
+       
        return ERROR_OK;
 }
 
@@ -749,7 +811,7 @@ int cortex_m3_set_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
                LOG_WARNING("breakpoint already set");
                return ERROR_OK;
        }
-
+    
        if (cortex_m3->auto_bp_type)
        {
                breakpoint->type = (breakpoint->address < 0x20000000) ? BKPT_HARD : BKPT_SOFT;
@@ -831,10 +893,18 @@ int cortex_m3_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
        /* get pointers to arch-specific information */
        armv7m_common_t *armv7m = target->arch_info;
        cortex_m3_common_t *cortex_m3 = armv7m->arch_info;
-       
+
        if (cortex_m3->auto_bp_type)
        {
                breakpoint->type = (breakpoint->address < 0x20000000) ? BKPT_HARD : BKPT_SOFT;
+#ifdef ARMV7_GDB_HACKS
+               if (breakpoint->length != 2) {
+                       /* XXX Hack: Replace all breakpoints with length != 2 with
+                        * a hardware breakpoint. */ 
+                       breakpoint->type = BKPT_HARD;
+                       breakpoint->length = 2;
+               }
+#endif
        }
 
        if ((breakpoint->type == BKPT_HARD) && (breakpoint->address >= 0x20000000))
@@ -1105,6 +1175,17 @@ int cortex_m3_store_core_reg_u32(struct target_s *target, enum armv7m_regtype ty
        cortex_m3_common_t *cortex_m3 = armv7m->arch_info;
        swjdp_common_t *swjdp = &cortex_m3->swjdp_info;
 
+#ifdef ARMV7_GDB_HACKS
+       /* If the LR register is being modified, make sure it will put us
+        * in "thumb" mode, or an INVSTATE exception will occur. This is a
+        * hack to deal with the fact that gdb will sometimes "forge"
+        * return addresses, and doesn't set the LSB correctly (i.e., when
+        * printing expressions containing function calls, it sets LR=0.) */
+       
+       if (num == 14)
+               value |= 0x01;
+#endif
+        
        if ((type == ARMV7M_REGISTER_CORE_GP) && (num <= ARMV7M_PSP))
        {
                retval = ahbap_write_coreregister_u32(swjdp, value, num);
@@ -1233,7 +1314,7 @@ int cortex_m3_init_target(struct command_context_s *cmd_ctx, struct target_s *ta
        return ERROR_OK;
 }
 
-int cortex_m3_examine(struct command_context_s *cmd_ctx, struct target_s *target)
+int cortex_m3_examine(struct target_s *target)
 {
        int retval;
        u32 cpuid, fpcr, dwtcr, ictr;
@@ -1293,8 +1374,7 @@ int cortex_m3_examine(struct command_context_s *cmd_ctx, struct target_s *target
        return ERROR_OK;
 }
 
-
-int cortex_m3_quit()
+int cortex_m3_quit(void)
 {
        
        return ERROR_OK;
@@ -1406,6 +1486,15 @@ int cortex_m3_init_arch_info(target_t *target, cortex_m3_common_t *cortex_m3, in
        armv7m->pre_restore_context = NULL;
        armv7m->post_restore_context = NULL;
        
+       if (variant)
+       {
+               cortex_m3->variant = strdup(variant);
+       }
+       else
+       {
+               cortex_m3->variant = strdup("");
+       }
+       
        armv7m_init_arch_info(target, armv7m);  
        armv7m->arch_info = cortex_m3;
        armv7m->load_core_reg_u32 = cortex_m3_load_core_reg_u32;
@@ -1436,7 +1525,6 @@ int cortex_m3_target_command(struct command_context_s *cmd_ctx, char *cmd, char
                variant = args[4];
        
        cortex_m3_init_arch_info(target, cortex_m3, chain_pos, variant);
-       cortex_m3_register_commands(cmd_ctx);
        
        return ERROR_OK;
 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)