* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
- * Copyright (C) 2007,2008 Øyvind Harboe *
+ * Copyright (C) 2007-2010 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
+ * Copyright (C) 2008 by Hongtao Zheng *
+ * hontor@126.com *
+ * *
+ * Copyright (C) 2009 by David Brownell *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
+
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
-#include "replacements.h"
-
+#include "breakpoints.h"
#include "embeddedice.h"
-#include "target.h"
#include "target_request.h"
+#include "etm.h"
+#include <helper/time_support.h>
+#include "arm_simulator.h"
+#include "arm_semihosting.h"
+#include "algorithm.h"
+#include "register.h"
#include "armv4_5.h"
-#include "arm_jtag.h"
-#include "jtag.h"
-#include "log.h"
-#include "arm7_9_common.h"
-#include "breakpoints.h"
-#include "time_support.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/time.h>
-#include <errno.h>
-
-int arm7_9_debug_entry(target_t *target);
-int arm7_9_enable_sw_bkpts(struct target_s *target);
-
-/* command handler forward declarations */
-int handle_arm7_9_write_xpsr_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_arm7_9_write_xpsr_im8_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_arm7_9_read_core_reg_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_arm7_9_write_core_reg_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_arm7_9_dbgrq_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_arm7_9_fast_memory_access_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_arm7_9_dcc_downloads_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_arm7_9_etm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+/**
+ * @file
+ * Hold common code supporting the ARM7 and ARM9 core generations.
+ *
+ * While the ARM core implementations evolved substantially during these
+ * two generations, they look quite similar from the JTAG perspective.
+ * Both have similar debug facilities, based on the same two scan chains
+ * providing access to the core and to an EmbeddedICE module. Both can
+ * support similar ETM and ETB modules, for tracing. And both expose
+ * what could be viewed as "ARM Classic", with multiple processor modes,
+ * shadowed registers, and support for the Thumb instruction set.
+ *
+ * Processor differences include things like presence or absence of MMU
+ * and cache, pipeline sizes, use of a modified Harvard Architecure
+ * (with separate instruction and data busses from the CPU), support
+ * for cpu clock gating during idle, and more.
+ */
+static int arm7_9_debug_entry(struct target *target);
-static int arm7_9_clear_watchpoints(arm7_9_common_t *arm7_9)
+/**
+ * Clear watchpoints for an ARM7/9 target.
+ *
+ * @param arm7_9 Pointer to the common struct for an ARM7/9 target
+ * @return JTAG error status after executing queue
+ */
+static int arm7_9_clear_watchpoints(struct arm7_9_common *arm7_9)
{
+ LOG_DEBUG("-");
embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
+ arm7_9->sw_breakpoint_count = 0;
arm7_9->sw_breakpoints_added = 0;
arm7_9->wp0_used = 0;
arm7_9->wp1_used = arm7_9->wp1_used_default;
return jtag_execute_queue();
}
-/* set up embedded ice registers */
-static int arm7_9_set_software_breakpoints(arm7_9_common_t *arm7_9)
+/**
+ * Assign a watchpoint to one of the two available hardware comparators in an
+ * ARM7 or ARM9 target.
+ *
+ * @param arm7_9 Pointer to the common struct for an ARM7/9 target
+ * @param breakpoint Pointer to the breakpoint to be used as a watchpoint
+ */
+static void arm7_9_assign_wp(struct arm7_9_common *arm7_9, struct breakpoint *breakpoint)
+{
+ if (!arm7_9->wp0_used) {
+ arm7_9->wp0_used = 1;
+ breakpoint->set = 1;
+ arm7_9->wp_available--;
+ } else if (!arm7_9->wp1_used) {
+ arm7_9->wp1_used = 1;
+ breakpoint->set = 2;
+ arm7_9->wp_available--;
+ } else
+ LOG_ERROR("BUG: no hardware comparator available");
+
+ LOG_DEBUG("BPID: %" PRId32 " (0x%08" TARGET_PRIxADDR ") using hw wp: %d",
+ breakpoint->unique_id,
+ breakpoint->address,
+ breakpoint->set);
+}
+
+/**
+ * Setup an ARM7/9 target's embedded ICE registers for software breakpoints.
+ *
+ * @param arm7_9 Pointer to common struct for ARM7/9 targets
+ * @return Error codes if there is a problem finding a watchpoint or the result
+ * of executing the JTAG queue
+ */
+static int arm7_9_set_software_breakpoints(struct arm7_9_common *arm7_9)
{
if (arm7_9->sw_breakpoints_added)
- {
return ERROR_OK;
- }
- if (arm7_9->wp_available < 1)
- {
+ if (arm7_9->wp_available < 1) {
LOG_WARNING("can't enable sw breakpoints with no watchpoint unit available");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
arm7_9->wp_available--;
/* pick a breakpoint unit */
- if (!arm7_9->wp0_used)
- {
- arm7_9->sw_breakpoints_added=1;
+ if (!arm7_9->wp0_used) {
+ arm7_9->sw_breakpoints_added = 1;
arm7_9->wp0_used = 3;
- } else if (!arm7_9->wp1_used)
- {
- arm7_9->sw_breakpoints_added=2;
+ } else if (!arm7_9->wp1_used) {
+ arm7_9->sw_breakpoints_added = 2;
arm7_9->wp1_used = 3;
- }
- else
- {
+ } else {
LOG_ERROR("BUG: both watchpoints used, but wp_available >= 1");
return ERROR_FAIL;
}
- if (arm7_9->sw_breakpoints_added==1)
- {
+ if (arm7_9->sw_breakpoints_added == 1) {
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_VALUE], arm7_9->arm_bkpt);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0x0);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffffu);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
- }
- else if (arm7_9->sw_breakpoints_added==2)
- {
+ } else if (arm7_9->sw_breakpoints_added == 2) {
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_VALUE], arm7_9->arm_bkpt);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0x0);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], 0xffffffffu);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
- }
- else
- {
+ } else {
LOG_ERROR("BUG: both watchpoints used, but wp_available >= 1");
return ERROR_FAIL;
}
+ LOG_DEBUG("SW BP using hw wp: %d",
+ arm7_9->sw_breakpoints_added);
return jtag_execute_queue();
}
-/* set things up after a reset / on startup */
-int arm7_9_setup(target_t *target)
+/**
+ * Setup the common pieces for an ARM7/9 target after reset or on startup.
+ *
+ * @param target Pointer to an ARM7/9 target to setup
+ * @return Result of clearing the watchpoints on the target
+ */
+static int arm7_9_setup(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
return arm7_9_clear_watchpoints(arm7_9);
}
-
-int arm7_9_get_arch_pointers(target_t *target, armv4_5_common_t **armv4_5_p, arm7_9_common_t **arm7_9_p)
-{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
- {
- return -1;
- }
-
- if (arm7_9->common_magic != ARM7_9_COMMON_MAGIC)
- {
- return -1;
- }
-
- *armv4_5_p = armv4_5;
- *arm7_9_p = arm7_9;
-
- return ERROR_OK;
-}
-
-/* we set up the breakpoint even if it is already set. Some action, e.g. reset
- * might have erased the values in embedded ice
+/**
+ * Set either a hardware or software breakpoint on an ARM7/9 target. The
+ * breakpoint is set up even if it is already set. Some actions, e.g. reset,
+ * might have erased the values in Embedded ICE.
+ *
+ * @param target Pointer to the target device to set the breakpoints on
+ * @param breakpoint Pointer to the breakpoint to be set
+ * @return For hardware breakpoints, this is the result of executing the JTAG
+ * queue. For software breakpoints, this will be the status of the
+ * required memory reads and writes
*/
-int arm7_9_set_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
+static int arm7_9_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- int retval=ERROR_OK;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ int retval = ERROR_OK;
- if (target->state != TARGET_HALTED)
- {
+ LOG_DEBUG("BPID: %" PRId32 ", Address: 0x%08" TARGET_PRIxADDR ", Type: %d",
+ breakpoint->unique_id,
+ breakpoint->address,
+ breakpoint->type);
+
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (breakpoint->type == BKPT_HARD)
- {
+ if (breakpoint->type == BKPT_HARD) {
/* either an ARM (4 byte) or Thumb (2 byte) breakpoint */
- u32 mask = (breakpoint->length == 4) ? 0x3u : 0x1u;
- if (breakpoint->set==1)
- {
+ uint32_t mask = (breakpoint->length == 4) ? 0x3u : 0x1u;
+
+ /* reassign a hw breakpoint */
+ if (breakpoint->set == 0)
+ arm7_9_assign_wp(arm7_9, breakpoint);
+
+ if (breakpoint->set == 1) {
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_VALUE], breakpoint->address);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], mask);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffffu);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
- }
- else if (breakpoint->set==2)
- {
+ } else if (breakpoint->set == 2) {
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE], breakpoint->address);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], mask);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0xffffffffu);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
- }
- else
- {
+ } else {
LOG_ERROR("BUG: no hardware comparator available");
return ERROR_OK;
}
- retval=jtag_execute_queue();
- }
- else if (breakpoint->type == BKPT_SOFT)
- {
- if ((retval=arm7_9_set_software_breakpoints(arm7_9))!=ERROR_OK)
- return retval;
-
+ retval = jtag_execute_queue();
+ } else if (breakpoint->type == BKPT_SOFT) {
/* did we already set this breakpoint? */
if (breakpoint->set)
return ERROR_OK;
- if (breakpoint->length == 4)
- {
- u32 verify = 0xffffffff;
+ if (breakpoint->length == 4) {
+ uint32_t verify = 0xffffffff;
/* keep the original instruction in target endianness */
- target->type->read_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr);
- /* write the breakpoint instruction in target endianness (arm7_9->arm_bkpt is host endian) */
- target_write_u32(target, breakpoint->address, arm7_9->arm_bkpt);
-
- target->type->read_memory(target, breakpoint->address, 4, 1, (u8 *)&verify);
- if (verify != arm7_9->arm_bkpt)
- {
- LOG_ERROR("Unable to set 32 bit software breakpoint at address %08x - check that memory is read/writable", breakpoint->address);
+ retval = target_read_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr);
+ if (retval != ERROR_OK)
+ return retval;
+ /* write the breakpoint instruction in target
+ * endianness (arm7_9->arm_bkpt is host endian) */
+ retval = target_write_u32(target, breakpoint->address, arm7_9->arm_bkpt);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_read_u32(target, breakpoint->address, &verify);
+ if (retval != ERROR_OK)
+ return retval;
+ if (verify != arm7_9->arm_bkpt) {
+ LOG_ERROR("Unable to set 32 bit software breakpoint at address %08" TARGET_PRIxADDR
+ " - check that memory is read/writable", breakpoint->address);
return ERROR_OK;
}
- }
- else
- {
- u16 verify = 0xffff;
+ } else {
+ uint16_t verify = 0xffff;
/* keep the original instruction in target endianness */
- target->type->read_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr);
- /* write the breakpoint instruction in target endianness (arm7_9->thumb_bkpt is host endian) */
- target_write_u16(target, breakpoint->address, arm7_9->thumb_bkpt);
-
- target->type->read_memory(target, breakpoint->address, 2, 1, (u8 *)&verify);
- if (verify != arm7_9->thumb_bkpt)
- {
- LOG_ERROR("Unable to set thumb software breakpoint at address %08x - check that memory is read/writable", breakpoint->address);
+ retval = target_read_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr);
+ if (retval != ERROR_OK)
+ return retval;
+ /* write the breakpoint instruction in target
+ * endianness (arm7_9->thumb_bkpt is host endian) */
+ retval = target_write_u16(target, breakpoint->address, arm7_9->thumb_bkpt);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_read_u16(target, breakpoint->address, &verify);
+ if (retval != ERROR_OK)
+ return retval;
+ if (verify != arm7_9->thumb_bkpt) {
+ LOG_ERROR("Unable to set thumb software breakpoint at address %08" TARGET_PRIxADDR
+ " - check that memory is read/writable", breakpoint->address);
return ERROR_OK;
}
}
+
+ retval = arm7_9_set_software_breakpoints(arm7_9);
+ if (retval != ERROR_OK)
+ return retval;
+
+ arm7_9->sw_breakpoint_count++;
+
breakpoint->set = 1;
}
return retval;
-
}
-int arm7_9_unset_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
+/**
+ * Unsets an existing breakpoint on an ARM7/9 target. If it is a hardware
+ * breakpoint, the watchpoint used will be freed and the Embedded ICE registers
+ * will be updated. Otherwise, the software breakpoint will be restored to its
+ * original instruction if it hasn't already been modified.
+ *
+ * @param target Pointer to ARM7/9 target to unset the breakpoint from
+ * @param breakpoint Pointer to breakpoint to be unset
+ * @return For hardware breakpoints, this is the result of executing the JTAG
+ * queue. For software breakpoints, this will be the status of the
+ * required memory reads and writes
+ */
+static int arm7_9_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ int retval = ERROR_OK;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- if (!breakpoint->set)
- {
+ LOG_DEBUG("BPID: %" PRId32 ", Address: 0x%08" TARGET_PRIxADDR,
+ breakpoint->unique_id,
+ breakpoint->address);
+
+ if (!breakpoint->set) {
LOG_WARNING("breakpoint not set");
return ERROR_OK;
}
- if (breakpoint->type == BKPT_HARD)
- {
- if (breakpoint->set == 1)
- {
+ if (breakpoint->type == BKPT_HARD) {
+ LOG_DEBUG("BPID: %" PRId32 " Releasing hw wp: %d",
+ breakpoint->unique_id,
+ breakpoint->set);
+ if (breakpoint->set == 1) {
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
arm7_9->wp0_used = 0;
- }
- else if (breakpoint->set == 2)
- {
+ arm7_9->wp_available++;
+ } else if (breakpoint->set == 2) {
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
arm7_9->wp1_used = 0;
+ arm7_9->wp_available++;
}
- jtag_execute_queue();
+ retval = jtag_execute_queue();
breakpoint->set = 0;
- }
- else
- {
+ } else {
/* restore original instruction (kept in target endianness) */
- if (breakpoint->length == 4)
- {
- u32 current_instr;
+ if (breakpoint->length == 4) {
+ uint32_t current_instr;
/* check that user program as not modified breakpoint instruction */
- target->type->read_memory(target, breakpoint->address, 4, 1, (u8*)¤t_instr);
- if (current_instr==arm7_9->arm_bkpt)
- target->type->write_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr);
- }
- else
- {
- u16 current_instr;
+ retval = target_read_memory(target,
+ breakpoint->address, 4, 1, (uint8_t *)¤t_instr);
+ if (retval != ERROR_OK)
+ return retval;
+ current_instr = target_buffer_get_u32(target, (uint8_t *)¤t_instr);
+ if (current_instr == arm7_9->arm_bkpt) {
+ retval = target_write_memory(target,
+ breakpoint->address, 4, 1, breakpoint->orig_instr);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ } else {
+ uint16_t current_instr;
/* check that user program as not modified breakpoint instruction */
- target->type->read_memory(target, breakpoint->address, 2, 1, (u8*)¤t_instr);
- if (current_instr==arm7_9->thumb_bkpt)
- target->type->write_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr);
+ retval = target_read_memory(target,
+ breakpoint->address, 2, 1, (uint8_t *)¤t_instr);
+ if (retval != ERROR_OK)
+ return retval;
+ current_instr = target_buffer_get_u16(target, (uint8_t *)¤t_instr);
+ if (current_instr == arm7_9->thumb_bkpt) {
+ retval = target_write_memory(target,
+ breakpoint->address, 2, 1, breakpoint->orig_instr);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+ }
+
+ if (--arm7_9->sw_breakpoint_count == 0) {
+ /* We have removed the last sw breakpoint, clear the hw breakpoint we used
+ *to implement it */
+ if (arm7_9->sw_breakpoints_added == 1)
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[
+ EICE_W0_CONTROL_VALUE], 0);
+ else if (arm7_9->sw_breakpoints_added == 2)
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[
+ EICE_W1_CONTROL_VALUE], 0);
}
+
breakpoint->set = 0;
}
- return ERROR_OK;
+ return retval;
}
-int arm7_9_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
+/**
+ * Add a breakpoint to an ARM7/9 target. This makes sure that there are no
+ * dangling breakpoints and that the desired breakpoint can be added.
+ *
+ * @param target Pointer to the target ARM7/9 device to add a breakpoint to
+ * @param breakpoint Pointer to the breakpoint to be added
+ * @return An error status if there is a problem adding the breakpoint or the
+ * result of setting the breakpoint
+ */
+int arm7_9_add_breakpoint(struct target *target, struct breakpoint *breakpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (arm7_9->breakpoint_count==0)
- {
+ if (arm7_9->breakpoint_count == 0) {
/* make sure we don't have any dangling breakpoints. This is vital upon
* GDB connect/disconnect
*/
arm7_9_clear_watchpoints(arm7_9);
}
- if ((breakpoint->type == BKPT_HARD) && (arm7_9->wp_available < 1))
- {
+ if ((breakpoint->type == BKPT_HARD) && (arm7_9->wp_available < 1)) {
LOG_INFO("no watchpoint unit available for hardware breakpoint");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- if ((breakpoint->length != 2) && (breakpoint->length != 4))
- {
+ if ((breakpoint->length != 2) && (breakpoint->length != 4)) {
LOG_INFO("only breakpoints of two (Thumb) or four (ARM) bytes length supported");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
if (breakpoint->type == BKPT_HARD)
- {
- arm7_9->wp_available--;
-
- if (!arm7_9->wp0_used)
- {
- arm7_9->wp0_used = 1;
- breakpoint->set = 1;
- }
- else if (!arm7_9->wp1_used)
- {
- arm7_9->wp1_used = 1;
- breakpoint->set = 2;
- }
- else
- {
- LOG_ERROR("BUG: no hardware comparator available");
- }
- }
-
+ arm7_9_assign_wp(arm7_9, breakpoint);
arm7_9->breakpoint_count++;
return arm7_9_set_breakpoint(target, breakpoint);
}
-int arm7_9_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
+/**
+ * Removes a breakpoint from an ARM7/9 target. This will make sure there are no
+ * dangling breakpoints and updates available watchpoints if it is a hardware
+ * breakpoint.
+ *
+ * @param target Pointer to the target to have a breakpoint removed
+ * @param breakpoint Pointer to the breakpoint to be removed
+ * @return Error status if there was a problem unsetting the breakpoint or the
+ * watchpoints could not be cleared
+ */
+int arm7_9_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ int retval = ERROR_OK;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- arm7_9_unset_breakpoint(target, breakpoint);
+ retval = arm7_9_unset_breakpoint(target, breakpoint);
+ if (retval != ERROR_OK)
+ return retval;
if (breakpoint->type == BKPT_HARD)
arm7_9->wp_available++;
arm7_9->breakpoint_count--;
- if (arm7_9->breakpoint_count==0)
- {
+ if (arm7_9->breakpoint_count == 0) {
/* make sure we don't have any dangling breakpoints */
- arm7_9_clear_watchpoints(arm7_9);
+ retval = arm7_9_clear_watchpoints(arm7_9);
+ if (retval != ERROR_OK)
+ return retval;
}
return ERROR_OK;
}
-int arm7_9_set_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+/**
+ * Sets a watchpoint for an ARM7/9 target in one of the watchpoint units. It is
+ * considered a bug to call this function when there are no available watchpoint
+ * units.
+ *
+ * @param target Pointer to an ARM7/9 target to set a watchpoint on
+ * @param watchpoint Pointer to the watchpoint to be set
+ * @return Error status if watchpoint set fails or the result of executing the
+ * JTAG queue
+ */
+static int arm7_9_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ int retval = ERROR_OK;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
int rw_mask = 1;
- u32 mask;
+ uint32_t mask;
mask = watchpoint->length - 1;
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
else
rw_mask = 1;
- if (!arm7_9->wp0_used)
- {
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_VALUE], watchpoint->address);
+ if (!arm7_9->wp0_used) {
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_VALUE],
+ watchpoint->address);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], mask);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], watchpoint->mask);
- if( watchpoint->mask != 0xffffffffu )
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_VALUE], watchpoint->value);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], 0xff & ~EICE_W_CTRL_nOPC & ~rw_mask);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE | EICE_W_CTRL_nOPC | (watchpoint->rw & 1));
-
- jtag_execute_queue();
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK],
+ watchpoint->mask);
+ if (watchpoint->mask != 0xffffffffu)
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_VALUE],
+ watchpoint->value);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK],
+ 0xff & ~EICE_W_CTRL_nOPC & ~rw_mask);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE],
+ EICE_W_CTRL_ENABLE | EICE_W_CTRL_nOPC | (watchpoint->rw & 1));
+
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
+ return retval;
watchpoint->set = 1;
arm7_9->wp0_used = 2;
- }
- else if (!arm7_9->wp1_used)
- {
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE], watchpoint->address);
+ } else if (!arm7_9->wp1_used) {
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE],
+ watchpoint->address);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], mask);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], watchpoint->mask);
- if( watchpoint->mask != 0xffffffffu )
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_VALUE], watchpoint->value);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], 0xff & ~EICE_W_CTRL_nOPC & ~rw_mask);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], EICE_W_CTRL_ENABLE | EICE_W_CTRL_nOPC | (watchpoint->rw & 1));
-
- jtag_execute_queue();
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK],
+ watchpoint->mask);
+ if (watchpoint->mask != 0xffffffffu)
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_VALUE],
+ watchpoint->value);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK],
+ 0xff & ~EICE_W_CTRL_nOPC & ~rw_mask);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE],
+ EICE_W_CTRL_ENABLE | EICE_W_CTRL_nOPC | (watchpoint->rw & 1));
+
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
+ return retval;
watchpoint->set = 2;
arm7_9->wp1_used = 2;
- }
- else
- {
+ } else {
LOG_ERROR("BUG: no hardware comparator available");
return ERROR_OK;
}
return ERROR_OK;
}
-int arm7_9_unset_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+/**
+ * Unset an existing watchpoint and clear the used watchpoint unit.
+ *
+ * @param target Pointer to the target to have the watchpoint removed
+ * @param watchpoint Pointer to the watchpoint to be removed
+ * @return Error status while trying to unset the watchpoint or the result of
+ * executing the JTAG queue
+ */
+static int arm7_9_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ int retval = ERROR_OK;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (!watchpoint->set)
- {
+ if (!watchpoint->set) {
LOG_WARNING("breakpoint not set");
return ERROR_OK;
}
- if (watchpoint->set == 1)
- {
+ if (watchpoint->set == 1) {
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
- jtag_execute_queue();
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
+ return retval;
arm7_9->wp0_used = 0;
- }
- else if (watchpoint->set == 2)
- {
+ } else if (watchpoint->set == 2) {
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
- jtag_execute_queue();
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
+ return retval;
arm7_9->wp1_used = 0;
}
watchpoint->set = 0;
return ERROR_OK;
}
-int arm7_9_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+/**
+ * Add a watchpoint to an ARM7/9 target. If there are no watchpoint units
+ * available, an error response is returned.
+ *
+ * @param target Pointer to the ARM7/9 target to add a watchpoint to
+ * @param watchpoint Pointer to the watchpoint to be added
+ * @return Error status while trying to add the watchpoint
+ */
+int arm7_9_add_watchpoint(struct target *target, struct watchpoint *watchpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
if (arm7_9->wp_available < 1)
- {
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
if ((watchpoint->length != 1) && (watchpoint->length != 2) && (watchpoint->length != 4))
- {
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
arm7_9->wp_available--;
return ERROR_OK;
}
-int arm7_9_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+/**
+ * Remove a watchpoint from an ARM7/9 target. The watchpoint will be unset and
+ * the used watchpoint unit will be reopened.
+ *
+ * @param target Pointer to the target to remove a watchpoint from
+ * @param watchpoint Pointer to the watchpoint to be removed
+ * @return Result of trying to unset the watchpoint
+ */
+int arm7_9_remove_watchpoint(struct target *target, struct watchpoint *watchpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ int retval = ERROR_OK;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- if (watchpoint->set)
- {
- arm7_9_unset_watchpoint(target, watchpoint);
+ if (watchpoint->set) {
+ retval = arm7_9_unset_watchpoint(target, watchpoint);
+ if (retval != ERROR_OK)
+ return retval;
}
arm7_9->wp_available++;
return ERROR_OK;
}
-
-
-
-int arm7_9_execute_sys_speed(struct target_s *target)
+/**
+ * Restarts the target by sending a RESTART instruction and moving the JTAG
+ * state to IDLE. This includes a timeout waiting for DBGACK and SYSCOMP to be
+ * asserted by the processor.
+ *
+ * @param target Pointer to target to issue commands to
+ * @return Error status if there is a timeout or a problem while executing the
+ * JTAG queue
+ */
+int arm7_9_execute_sys_speed(struct target *target)
{
int retval;
-
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- arm_jtag_t *jtag_info = &arm7_9->jtag_info;
- reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm_jtag *jtag_info = &arm7_9->jtag_info;
+ struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
/* set RESTART instruction */
- jtag_add_end_state(TAP_RTI);
if (arm7_9->need_bypass_before_restart) {
arm7_9->need_bypass_before_restart = 0;
- arm_jtag_set_instr(jtag_info, 0xf, NULL);
+ retval = arm_jtag_set_instr(jtag_info->tap, 0xf, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
}
- arm_jtag_set_instr(jtag_info, 0x4, NULL);
+ retval = arm_jtag_set_instr(jtag_info->tap, 0x4, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
- long long then=timeval_ms();
- int timeout;
- while (!(timeout=((timeval_ms()-then)>1000)))
- {
+ int64_t then = timeval_ms();
+ bool timeout;
+ while (!(timeout = ((timeval_ms()-then) > 1000))) {
/* read debug status register */
embeddedice_read_reg(dbg_stat);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
if ((buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1))
- && (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_SYSCOMP, 1)))
+ && (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_SYSCOMP, 1)))
break;
- if (debug_level>=3)
- {
+ if (debug_level >= 3)
alive_sleep(100);
- } else
- {
+ else
keep_alive();
- }
}
- if (timeout)
- {
- LOG_ERROR("timeout waiting for SYSCOMP & DBGACK, last DBG_STATUS: %x", buf_get_u32(dbg_stat->value, 0, dbg_stat->size));
+ if (timeout) {
+ LOG_ERROR("timeout waiting for SYSCOMP & DBGACK, last DBG_STATUS: %" PRIx32 "",
+ buf_get_u32(dbg_stat->value, 0, dbg_stat->size));
return ERROR_TARGET_TIMEOUT;
}
return ERROR_OK;
}
-int arm7_9_execute_fast_sys_speed(struct target_s *target)
+/**
+ * Restarts the target by sending a RESTART instruction and moving the JTAG
+ * state to IDLE. This validates that DBGACK and SYSCOMP are set without
+ * waiting until they are.
+ *
+ * @param target Pointer to the target to issue commands to
+ * @return Always ERROR_OK
+ */
+static int arm7_9_execute_fast_sys_speed(struct target *target)
{
- static int set=0;
- static u8 check_value[4], check_mask[4];
+ static int set;
+ static uint8_t check_value[4], check_mask[4];
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- arm_jtag_t *jtag_info = &arm7_9->jtag_info;
- reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm_jtag *jtag_info = &arm7_9->jtag_info;
+ struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+ int retval;
/* set RESTART instruction */
- jtag_add_end_state(TAP_RTI);
if (arm7_9->need_bypass_before_restart) {
arm7_9->need_bypass_before_restart = 0;
- arm_jtag_set_instr(jtag_info, 0xf, NULL);
+ retval = arm_jtag_set_instr(jtag_info->tap, 0xf, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
}
- arm_jtag_set_instr(jtag_info, 0x4, NULL);
+ retval = arm_jtag_set_instr(jtag_info->tap, 0x4, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
- if (!set)
- {
+ if (!set) {
/* check for DBGACK and SYSCOMP set (others don't care) */
/* NB! These are constants that must be available until after next jtag_execute() and
- we evaluate the values upon first execution in lieu of setting up these constants
- during early setup.
- */
+ * we evaluate the values upon first execution in lieu of setting up these constants
+ * during early setup.
+ * */
buf_set_u32(check_value, 0, 32, 0x9);
buf_set_u32(check_mask, 0, 32, 0x9);
- set=1;
+ set = 1;
}
/* read debug status register */
- embeddedice_read_reg_w_check(dbg_stat, check_value, check_value);
+ embeddedice_read_reg_w_check(dbg_stat, check_value, check_mask);
return ERROR_OK;
}
-int arm7_9_target_request_data(target_t *target, u32 size, u8 *buffer)
+/**
+ * Get some data from the ARM7/9 target.
+ *
+ * @param target Pointer to the ARM7/9 target to read data from
+ * @param size The number of 32bit words to be read
+ * @param buffer Pointer to the buffer that will hold the data
+ * @return The result of receiving data from the Embedded ICE unit
+ */
+int arm7_9_target_request_data(struct target *target, uint32_t size, uint8_t *buffer)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- arm_jtag_t *jtag_info = &arm7_9->jtag_info;
- u32 *data;
- int i;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm_jtag *jtag_info = &arm7_9->jtag_info;
+ uint32_t *data;
+ int retval = ERROR_OK;
+ uint32_t i;
- data = malloc(size * (sizeof(u32)));
+ data = malloc(size * (sizeof(uint32_t)));
- embeddedice_receive(jtag_info, data, size);
+ retval = embeddedice_receive(jtag_info, data, size);
+ /* return the 32-bit ints in the 8-bit array */
for (i = 0; i < size; i++)
- {
h_u32_to_le(buffer + (i * 4), data[i]);
- }
free(data);
- return ERROR_OK;
+ return retval;
}
-int arm7_9_handle_target_request(void *priv)
+/**
+ * Handles requests to an ARM7/9 target. If debug messaging is enabled, the
+ * target is running and the DCC control register has the W bit high, this will
+ * execute the request on the target.
+ *
+ * @param priv Void pointer expected to be a struct target pointer
+ * @return ERROR_OK unless there are issues with the JTAG queue or when reading
+ * from the Embedded ICE unit
+ */
+static int arm7_9_handle_target_request(void *priv)
{
- target_t *target = priv;
- if (!target->type->examined)
+ int retval = ERROR_OK;
+ struct target *target = priv;
+ if (!target_was_examined(target))
return ERROR_OK;
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- arm_jtag_t *jtag_info = &arm7_9->jtag_info;
- reg_t *dcc_control = &arm7_9->eice_cache->reg_list[EICE_COMMS_CTRL];
-
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm_jtag *jtag_info = &arm7_9->jtag_info;
+ struct reg *dcc_control = &arm7_9->eice_cache->reg_list[EICE_COMMS_CTRL];
if (!target->dbg_msg_enabled)
return ERROR_OK;
- if (target->state == TARGET_RUNNING)
- {
+ if (target->state == TARGET_RUNNING) {
/* read DCC control register */
embeddedice_read_reg(dcc_control);
- jtag_execute_queue();
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
+ return retval;
/* check W bit */
- if (buf_get_u32(dcc_control->value, 1, 1) == 1)
- {
- u32 request;
+ if (buf_get_u32(dcc_control->value, 1, 1) == 1) {
+ uint32_t request;
- embeddedice_receive(jtag_info, &request, 1);
- target_request(target, request);
+ retval = embeddedice_receive(jtag_info, &request, 1);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_request(target, request);
+ if (retval != ERROR_OK)
+ return retval;
}
}
return ERROR_OK;
}
-int arm7_9_poll(target_t *target)
+/**
+ * Polls an ARM7/9 target for its current status. If DBGACK is set, the target
+ * is manipulated to the right halted state based on its current state. This is
+ * what happens:
+ *
+ * <table>
+ * <tr><th > State</th><th > Action</th></tr>
+ * <tr><td > TARGET_RUNNING | TARGET_RESET</td>
+ * <td > Enters debug mode. If TARGET_RESET, pc may be checked</td></tr>
+ * <tr><td > TARGET_UNKNOWN</td><td > Warning is logged</td></tr>
+ * <tr><td > TARGET_DEBUG_RUNNING</td><td > Enters debug mode</td></tr>
+ * <tr><td > TARGET_HALTED</td><td > Nothing</td></tr>
+ * </table>
+ *
+ * If the target does not end up in the halted state, a warning is produced. If
+ * DBGACK is cleared, then the target is expected to either be running or
+ * running in debug.
+ *
+ * @param target Pointer to the ARM7/9 target to poll
+ * @return ERROR_OK or an error status if a command fails
+ */
+int arm7_9_poll(struct target *target)
{
int retval;
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
/* read debug status register */
embeddedice_read_reg(dbg_stat);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
- }
- if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1))
- {
-/* LOG_DEBUG("DBGACK set, dbg_state->value: 0x%x", buf_get_u32(dbg_stat->value, 0, 32));*/
- if (target->state == TARGET_UNKNOWN)
- {
+ if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1)) {
+ /* LOG_DEBUG("DBGACK set, dbg_state->value: 0x%x", buf_get_u32(dbg_stat->value, 0, *32));*/
+ if (target->state == TARGET_UNKNOWN) {
+ /* Starting OpenOCD with target in debug-halt */
target->state = TARGET_RUNNING;
- LOG_WARNING("DBGACK set while target was in unknown state. Reset or initialize target.");
+ LOG_DEBUG("DBGACK already set during server startup.");
}
- if ((target->state == TARGET_RUNNING) || (target->state == TARGET_RESET))
- {
- int check_pc=0;
- if (target->state == TARGET_RESET)
- {
- if (target->reset_halt)
- {
- if ((jtag_reset_config & RESET_SRST_PULLS_TRST)==0)
- {
- check_pc = 1;
- }
- }
- }
-
+ if ((target->state == TARGET_RUNNING) || (target->state == TARGET_RESET)) {
target->state = TARGET_HALTED;
- if ((retval = arm7_9_debug_entry(target)) != ERROR_OK)
+ retval = arm7_9_debug_entry(target);
+ if (retval != ERROR_OK)
return retval;
- if (check_pc)
- {
- reg_t *reg = register_get_by_name(target->reg_cache, "pc", 1);
- u32 t=*((u32 *)reg->value);
- if (t!=0)
- {
- LOG_ERROR("PC was not 0. Does this target need srst_pulls_trst?");
- }
- }
+ if (arm_semihosting(target, &retval) != 0)
+ return retval;
- target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+ retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+ if (retval != ERROR_OK)
+ return retval;
}
- if (target->state == TARGET_DEBUG_RUNNING)
- {
+ if (target->state == TARGET_DEBUG_RUNNING) {
target->state = TARGET_HALTED;
- if ((retval = arm7_9_debug_entry(target)) != ERROR_OK)
+ retval = arm7_9_debug_entry(target);
+ if (retval != ERROR_OK)
return retval;
- target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
+ retval = target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
+ if (retval != ERROR_OK)
+ return retval;
}
if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("DBGACK set, but the target did not end up in the halted stated %d", target->state);
- }
- }
- else
- {
+ LOG_WARNING(
+ "DBGACK set, but the target did not end up in the halted state %d",
+ target->state);
+ } else {
if (target->state != TARGET_DEBUG_RUNNING)
target->state = TARGET_RUNNING;
}
return ERROR_OK;
}
-/*
- Some -S targets (ARM966E-S in the STR912 isn't affected, ARM926EJ-S
- in the LPC3180 and AT91SAM9260 is affected) completely stop the JTAG clock
- while the core is held in reset(SRST). It isn't possible to program the halt
- condition once reset was asserted, hence a hook that allows the target to set
- up its reset-halt condition prior to asserting reset.
-*/
-
-int arm7_9_assert_reset(target_t *target)
+/**
+ * Asserts the reset (SRST) on an ARM7/9 target. Some -S targets (ARM966E-S in
+ * the STR912 isn't affected, ARM926EJ-S in the LPC3180 and AT91SAM9260 is
+ * affected) completely stop the JTAG clock while the core is held in reset
+ * (SRST). It isn't possible to program the halt condition once reset is
+ * asserted, hence a hook that allows the target to set up its reset-halt
+ * condition is setup prior to asserting reset.
+ *
+ * @param target Pointer to an ARM7/9 target to assert reset on
+ * @return ERROR_FAIL if the JTAG device does not have SRST, otherwise ERROR_OK
+ */
+int arm7_9_assert_reset(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- LOG_DEBUG("target->state: %s",
- Jim_Nvp_value2name_simple( nvp_target_state,target->state)->name);
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
+ bool use_event = false;
- if (!(jtag_reset_config & RESET_HAS_SRST))
- {
- LOG_ERROR("Can't assert SRST");
+ /* TODO: apply hw reset signal in not examined state */
+ if (!(target_was_examined(target))) {
+ LOG_WARNING("Reset is not asserted because the target is not examined.");
+ LOG_WARNING("Use a reset button or power cycle the target.");
+ return ERROR_TARGET_NOT_EXAMINED;
+ }
+
+ LOG_DEBUG("target->state: %s", target_state_name(target));
+
+ if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT))
+ use_event = true;
+ else if (!(jtag_reset_config & RESET_HAS_SRST)) {
+ LOG_ERROR("%s: how to reset?", target_name(target));
return ERROR_FAIL;
}
- if (target->reset_halt)
- {
+ /* At this point trst has been asserted/deasserted once. We would
+ * like to program EmbeddedICE while SRST is asserted, instead of
+ * depending on SRST to leave that module alone. However, many CPUs
+ * gate the JTAG clock while SRST is asserted; or JTAG may need
+ * clock stability guarantees (adaptive clocking might help).
+ *
+ * So we assume JTAG access during SRST is off the menu unless it's
+ * been specifically enabled.
+ */
+ bool srst_asserted = false;
+
+ if (!use_event && !(jtag_reset_config & RESET_SRST_PULLS_TRST)
+ && (jtag_reset_config & RESET_SRST_NO_GATING)) {
+ jtag_add_reset(0, 1);
+ srst_asserted = true;
+ }
+
+ if (target->reset_halt) {
/*
- * Some targets do not support communication while SRST is asserted. We need to
- * set up the reset vector catch here.
+ * For targets that don't support communication while SRST is
+ * asserted, we need to set up the reset vector catch first.
*
- * If TRST is asserted, then these settings will be reset anyway, so setting them
- * here is harmless.
+ * When we use TRST+SRST and that's equivalent to a power-up
+ * reset, these settings may well be reset anyway; so setting
+ * them here won't matter.
*/
- if (arm7_9->has_vector_catch)
- {
- /* program vector catch register to catch reset vector */
+ if (arm7_9->has_vector_catch) {
+ /* program vector catch register to catch reset */
embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_VEC_CATCH], 0x1);
- }
- else
- {
- /* program watchpoint unit to match on reset vector address */
+
+ /* extra runtest added as issues were found with
+ * certain ARM9 cores (maybe more) - AT91SAM9260
+ * and STR9
+ */
+ jtag_add_runtest(1, TAP_IDLE);
+ } else {
+ /* program watchpoint unit to match on reset vector
+ * address
+ */
embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_VALUE], 0x0);
embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0x3);
embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffff);
}
}
- /* here we should issue a srst only, but we may have to assert trst as well */
- if (jtag_reset_config & RESET_SRST_PULLS_TRST)
- {
- jtag_add_reset(1, 1);
- } else
- {
- jtag_add_reset(0, 1);
+ if (use_event)
+ target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
+ else {
+ /* If we use SRST ... we'd like to issue just SRST, but the
+ * board or chip may be set up so we have to assert TRST as
+ * well. On some chips that combination is equivalent to a
+ * power-up reset, and generally clobbers EICE state.
+ */
+ if (jtag_reset_config & RESET_SRST_PULLS_TRST)
+ jtag_add_reset(1, 1);
+ else if (!srst_asserted)
+ jtag_add_reset(0, 1);
+ jtag_add_sleep(50000);
}
-
target->state = TARGET_RESET;
- jtag_add_sleep(50000);
-
- armv4_5_invalidate_core_regs(target);
+ register_cache_invalidate(arm7_9->arm.core_cache);
- if ((target->reset_halt)&&((jtag_reset_config & RESET_SRST_PULLS_TRST)==0))
- {
- /* debug entry was already prepared in arm7_9_assert_reset() */
+ /* REVISIT why isn't standard debug entry logic sufficient?? */
+ if (target->reset_halt && (!(jtag_reset_config & RESET_SRST_PULLS_TRST) || use_event)) {
+ /* debug entry was prepared above */
target->debug_reason = DBG_REASON_DBGRQ;
}
return ERROR_OK;
-
}
-int arm7_9_deassert_reset(target_t *target)
+/**
+ * Deassert the reset (SRST) signal on an ARM7/9 target. If SRST pulls TRST
+ * and the target is being reset into a halt, a warning will be triggered
+ * because it is not possible to reset into a halted mode in this case. The
+ * target is halted using the target's functions.
+ *
+ * @param target Pointer to the target to have the reset deasserted
+ * @return ERROR_OK or an error from polling or halting the target
+ */
+int arm7_9_deassert_reset(struct target *target)
{
- int retval=ERROR_OK;
- LOG_DEBUG("target->state: %s",
- Jim_Nvp_value2name_simple( nvp_target_state,target->state)->name);
-
+ int retval = ERROR_OK;
+ LOG_DEBUG("target->state: %s", target_state_name(target));
/* deassert reset lines */
jtag_add_reset(0, 0);
- if (target->reset_halt&&(jtag_reset_config & RESET_SRST_PULLS_TRST)!=0)
- {
- LOG_WARNING("srst pulls trst - can not reset into halted mode. Issuing halt after reset.");
- /* set up embedded ice registers again */
- if ((retval=target->type->examine(target))!=ERROR_OK)
- return retval;
+ /* In case polling is disabled, we need to examine the
+ * target and poll here for this target to work correctly.
+ *
+ * Otherwise, e.g. halt will fail afterwards with bogus
+ * error messages as halt will believe that reset is
+ * still in effect.
+ */
+ retval = target_examine_one(target);
+ if (retval != ERROR_OK)
+ return retval;
- if ((retval=target_poll(target))!=ERROR_OK)
- {
- return retval;
- }
+ retval = target_poll(target);
+ if (retval != ERROR_OK)
+ return retval;
- if ((retval=target_halt(target))!=ERROR_OK)
- {
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
+ if (target->reset_halt && (jtag_reset_config & RESET_SRST_PULLS_TRST) != 0) {
+ LOG_WARNING(
+ "srst pulls trst - can not reset into halted mode. Issuing halt after reset.");
+ retval = target_halt(target);
+ if (retval != ERROR_OK)
return retval;
- }
-
}
return retval;
}
-int arm7_9_clear_halt(target_t *target)
+/**
+ * Clears the halt condition for an ARM7/9 target. If it isn't coming out of
+ * reset and if DBGRQ is used, it is progammed to be deasserted. If the reset
+ * vector catch was used, it is restored. Otherwise, the control value is
+ * restored and the watchpoint unit is restored if it was in use.
+ *
+ * @param target Pointer to the ARM7/9 target to have halt cleared
+ * @return Always ERROR_OK
+ */
+static int arm7_9_clear_halt(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct reg *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
/* we used DBGRQ only if we didn't come out of reset */
- if (!arm7_9->debug_entry_from_reset && arm7_9->use_dbgrq)
- {
+ if (!arm7_9->debug_entry_from_reset && arm7_9->use_dbgrq) {
/* program EmbeddedICE Debug Control Register to deassert DBGRQ
*/
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 0);
embeddedice_store_reg(dbg_ctrl);
- }
- else
- {
- if (arm7_9->debug_entry_from_reset && arm7_9->has_vector_catch)
- {
+ } else {
+ if (arm7_9->debug_entry_from_reset && arm7_9->has_vector_catch) {
/* if we came out of reset, and vector catch is supported, we used
* vector catch to enter debug state
* restore the register in that case
*/
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_VEC_CATCH]);
- }
- else
- {
+ } else {
/* restore registers if watchpoint unit 0 was in use
*/
- if (arm7_9->wp0_used)
- {
+ if (arm7_9->wp0_used) {
if (arm7_9->debug_entry_from_reset)
- {
- embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_VALUE]);
- }
- embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK]);
- embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK]);
- embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK]);
+ embeddedice_store_reg(&arm7_9->eice_cache->reg_list[
+ EICE_W0_ADDR_VALUE]);
+ embeddedice_store_reg(&arm7_9->eice_cache->reg_list[
+ EICE_W0_ADDR_MASK]);
+ embeddedice_store_reg(&arm7_9->eice_cache->reg_list[
+ EICE_W0_DATA_MASK]);
+ embeddedice_store_reg(&arm7_9->eice_cache->reg_list[
+ EICE_W0_CONTROL_MASK]);
}
/* control value always has to be restored, as it was either disabled,
* or enabled with possibly different bits
return ERROR_OK;
}
-int arm7_9_soft_reset_halt(struct target_s *target)
+/**
+ * Issue a software reset and halt to an ARM7/9 target. The target is halted
+ * and then there is a wait until the processor shows the halt. This wait can
+ * timeout and results in an error being returned. The software reset involves
+ * clearing the halt, updating the debug control register, changing to ARM mode,
+ * reset of the program counter, and reset of all of the registers.
+ *
+ * @param target Pointer to the ARM7/9 target to be reset and halted by software
+ * @return Error status if any of the commands fail, otherwise ERROR_OK
+ */
+int arm7_9_soft_reset_halt(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
- reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
+ struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+ struct reg *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
int i;
int retval;
- if ((retval=target_halt(target))!=ERROR_OK)
+ /* FIX!!! replace some of this code with tcl commands
+ *
+ * halt # the halt command is synchronous
+ * armv4_5 core_state arm
+ *
+ */
+
+ retval = target_halt(target);
+ if (retval != ERROR_OK)
return retval;
- long long then=timeval_ms();
+ long long then = timeval_ms();
int timeout;
- while (!(timeout=((timeval_ms()-then)>1000)))
- {
+ while (!(timeout = ((timeval_ms()-then) > 1000))) {
if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1) != 0)
break;
embeddedice_read_reg(dbg_stat);
- if ((retval=jtag_execute_queue())!=ERROR_OK)
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
- if (debug_level>=3)
- {
+ if (debug_level >= 3)
alive_sleep(100);
- } else
- {
+ else
keep_alive();
- }
}
- if (timeout)
- {
+ if (timeout) {
LOG_ERROR("Failed to halt CPU after 1 sec");
return ERROR_TARGET_TIMEOUT;
}
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_INTDIS, 1, 1);
embeddedice_store_reg(dbg_ctrl);
- arm7_9_clear_halt(target);
+ retval = arm7_9_clear_halt(target);
+ if (retval != ERROR_OK)
+ return retval;
/* if the target is in Thumb state, change to ARM state */
- if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_ITBIT, 1))
- {
- u32 r0_thumb, pc_thumb;
+ if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_ITBIT, 1)) {
+ uint32_t r0_thumb, pc_thumb;
LOG_DEBUG("target entered debug from Thumb state, changing to ARM");
/* Entered debug from Thumb mode */
- armv4_5->core_state = ARMV4_5_STATE_THUMB;
+ arm->core_state = ARM_STATE_THUMB;
arm7_9->change_to_arm(target, &r0_thumb, &pc_thumb);
}
+ /* REVISIT likewise for bit 5 -- switch Jazelle-to-ARM */
+
/* all register content is now invalid */
- armv4_5_invalidate_core_regs(target);
+ register_cache_invalidate(arm->core_cache);
/* SVC, ARM state, IRQ and FIQ disabled */
- buf_set_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8, 0xd3);
- armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty = 1;
- armv4_5->core_cache->reg_list[ARMV4_5_CPSR].valid = 1;
+ uint32_t cpsr;
- /* start fetching from 0x0 */
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, 0x0);
- armv4_5->core_cache->reg_list[15].dirty = 1;
- armv4_5->core_cache->reg_list[15].valid = 1;
-
- armv4_5->core_mode = ARMV4_5_MODE_SVC;
- armv4_5->core_state = ARMV4_5_STATE_ARM;
+ cpsr = buf_get_u32(arm->cpsr->value, 0, 32);
+ cpsr &= ~0xff;
+ cpsr |= 0xd3;
+ arm_set_cpsr(arm, cpsr);
+ arm->cpsr->dirty = 1;
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
- return ERROR_FAIL;
+ /* start fetching from 0x0 */
+ buf_set_u32(arm->pc->value, 0, 32, 0x0);
+ arm->pc->dirty = 1;
+ arm->pc->valid = 1;
/* reset registers */
- for (i = 0; i <= 14; i++)
- {
- buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).value, 0, 32, 0xffffffff);
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).dirty = 1;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).valid = 1;
+ for (i = 0; i <= 14; i++) {
+ struct reg *r = arm_reg_current(arm, i);
+
+ buf_set_u32(r->value, 0, 32, 0xffffffff);
+ r->dirty = 1;
+ r->valid = 1;
}
- target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+ retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+ if (retval != ERROR_OK)
+ return retval;
return ERROR_OK;
}
-int arm7_9_halt(target_t *target)
+/**
+ * Halt an ARM7/9 target. This is accomplished by either asserting the DBGRQ
+ * line or by programming a watchpoint to trigger on any address. It is
+ * considered a bug to call this function while the target is in the
+ * TARGET_RESET state.
+ *
+ * @param target Pointer to the ARM7/9 target to be halted
+ * @return Always ERROR_OK
+ */
+int arm7_9_halt(struct target *target)
{
- if (target->state==TARGET_RESET)
- {
- LOG_ERROR("BUG: arm7/9 does not support halt during reset. This is handled in arm7_9_assert_reset()");
+ if (target->state == TARGET_RESET) {
+ LOG_ERROR(
+ "BUG: arm7/9 does not support halt during reset. This is handled in arm7_9_assert_reset()");
return ERROR_OK;
}
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct reg *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
LOG_DEBUG("target->state: %s",
- Jim_Nvp_value2name_simple( nvp_target_state,target->state)->name);
+ target_state_name(target));
- if (target->state == TARGET_HALTED)
- {
+ if (target->state == TARGET_HALTED) {
LOG_DEBUG("target was already halted");
return ERROR_OK;
}
if (target->state == TARGET_UNKNOWN)
- {
LOG_WARNING("target was in unknown state when halt was requested");
- }
- if (arm7_9->use_dbgrq)
- {
+ if (arm7_9->use_dbgrq) {
/* program EmbeddedICE Debug Control Register to assert DBGRQ
*/
- if (arm7_9->set_special_dbgrq) {
+ if (arm7_9->set_special_dbgrq)
arm7_9->set_special_dbgrq(target);
- } else {
+ else {
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 1);
embeddedice_store_reg(dbg_ctrl);
}
- }
- else
- {
+ } else {
/* program watchpoint unit to match on any address
*/
embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffff);
embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffff);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE],
+ EICE_W_CTRL_ENABLE);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK],
+ ~EICE_W_CTRL_nOPC & 0xff);
}
target->debug_reason = DBG_REASON_DBGRQ;
return ERROR_OK;
}
-int arm7_9_debug_entry(target_t *target)
+/**
+ * Handle an ARM7/9 target's entry into debug mode. The halt is cleared on the
+ * ARM. The JTAG queue is then executed and the reason for debug entry is
+ * examined. Once done, the target is verified to be halted and the processor
+ * is forced into ARM mode. The core registers are saved for the current core
+ * mode and the program counter (register 15) is updated as needed. The core
+ * registers and CPSR and SPSR are saved for restoration later.
+ *
+ * @param target Pointer to target that is entering debug mode
+ * @return Error code if anything fails, otherwise ERROR_OK
+ */
+static int arm7_9_debug_entry(struct target *target)
{
int i;
- u32 context[16];
- u32* context_p[16];
- u32 r0_thumb, pc_thumb;
- u32 cpsr;
+ uint32_t context[16];
+ uint32_t *context_p[16];
+ uint32_t r0_thumb, pc_thumb;
+ uint32_t cpsr, cpsr_mask = 0;
int retval;
- /* get pointers to arch-specific information */
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
- reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
+ struct reg *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
+ struct reg *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
#ifdef _DEBUG_ARM7_9_
LOG_DEBUG("-");
#endif
- if (arm7_9->pre_debug_entry)
- arm7_9->pre_debug_entry(target);
-
/* program EmbeddedICE Debug Control Register to assert DBGACK and INTDIS
* ensure that DBGRQ is cleared
*/
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_INTDIS, 1, 1);
embeddedice_store_reg(dbg_ctrl);
- arm7_9_clear_halt(target);
-
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = arm7_9_clear_halt(target);
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = arm7_9->examine_debug_reason(target)) != ERROR_OK)
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
+ retval = arm7_9->examine_debug_reason(target);
+ if (retval != ERROR_OK)
+ return retval;
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* if the target is in Thumb state, change to ARM state */
- if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_ITBIT, 1))
- {
+ if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_ITBIT, 1)) {
LOG_DEBUG("target entered debug from Thumb state");
/* Entered debug from Thumb mode */
- armv4_5->core_state = ARMV4_5_STATE_THUMB;
+ arm->core_state = ARM_STATE_THUMB;
+ cpsr_mask = 1 << 5;
arm7_9->change_to_arm(target, &r0_thumb, &pc_thumb);
- LOG_DEBUG("r0_thumb: 0x%8.8x, pc_thumb: 0x%8.8x", r0_thumb, pc_thumb);
- }
- else
- {
+ LOG_DEBUG("r0_thumb: 0x%8.8" PRIx32
+ ", pc_thumb: 0x%8.8" PRIx32, r0_thumb, pc_thumb);
+ } else if (buf_get_u32(dbg_stat->value, 5, 1)) {
+ /* \todo Get some vaguely correct handling of Jazelle, if
+ * anyone ever uses it and full info becomes available.
+ * See ARM9EJS TRM B.7.1 for how to switch J->ARM; and
+ * B.7.3 for the reverse. That'd be the bare minimum...
+ */
+ LOG_DEBUG("target entered debug from Jazelle state");
+ arm->core_state = ARM_STATE_JAZELLE;
+ cpsr_mask = 1 << 24;
+ LOG_ERROR("Jazelle debug entry -- BROKEN!");
+ } else {
LOG_DEBUG("target entered debug from ARM state");
/* Entered debug from ARM mode */
- armv4_5->core_state = ARMV4_5_STATE_ARM;
+ arm->core_state = ARM_STATE_ARM;
}
for (i = 0; i < 16; i++)
arm7_9->read_xpsr(target, &cpsr, 0);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
- /* if the core has been executing in Thumb state, set the T bit */
- if (armv4_5->core_state == ARMV4_5_STATE_THUMB)
- cpsr |= 0x20;
-
- buf_set_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32, cpsr);
- armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty = 0;
- armv4_5->core_cache->reg_list[ARMV4_5_CPSR].valid = 1;
-
- armv4_5->core_mode = cpsr & 0x1f;
+ /* Sync our CPSR copy with J or T bits EICE reported, but
+ * which we then erased by putting the core into ARM mode.
+ */
+ arm_set_cpsr(arm, cpsr | cpsr_mask);
- if (armv4_5_mode_to_number(armv4_5->core_mode) == -1)
- {
+ if (!is_arm_mode(arm->core_mode)) {
target->state = TARGET_UNKNOWN;
LOG_ERROR("cpsr contains invalid mode value - communication failure");
return ERROR_TARGET_FAILURE;
}
- LOG_DEBUG("target entered debug state in %s mode", armv4_5_mode_strings[armv4_5_mode_to_number(armv4_5->core_mode)]);
+ LOG_DEBUG("target entered debug state in %s mode",
+ arm_mode_name(arm->core_mode));
- if (armv4_5->core_state == ARMV4_5_STATE_THUMB)
- {
+ if (arm->core_state == ARM_STATE_THUMB) {
LOG_DEBUG("thumb state, applying fixups");
context[0] = r0_thumb;
context[15] = pc_thumb;
- } else if (armv4_5->core_state == ARMV4_5_STATE_ARM)
- {
+ } else if (arm->core_state == ARM_STATE_ARM) {
/* adjust value stored by STM */
context[15] -= 3 * 4;
}
- if ((target->debug_reason == DBG_REASON_BREAKPOINT)
- || (target->debug_reason == DBG_REASON_SINGLESTEP)
- || (target->debug_reason == DBG_REASON_WATCHPOINT)
- || (target->debug_reason == DBG_REASON_WPTANDBKPT)
- || ((target->debug_reason == DBG_REASON_DBGRQ) && (arm7_9->use_dbgrq == 0)))
- context[15] -= 3 * ((armv4_5->core_state == ARMV4_5_STATE_ARM) ? 4 : 2);
- else if (target->debug_reason == DBG_REASON_DBGRQ)
- context[15] -= arm7_9->dbgreq_adjust_pc * ((armv4_5->core_state == ARMV4_5_STATE_ARM) ? 4 : 2);
+ if ((target->debug_reason != DBG_REASON_DBGRQ) || (!arm7_9->use_dbgrq))
+ context[15] -= 3 * ((arm->core_state == ARM_STATE_ARM) ? 4 : 2);
else
- {
- LOG_ERROR("unknown debug reason: %i", target->debug_reason);
- }
+ context[15] -= arm7_9->dbgreq_adjust_pc *
+ ((arm->core_state == ARM_STATE_ARM) ? 4 : 2);
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
- return ERROR_FAIL;
+ for (i = 0; i <= 15; i++) {
+ struct reg *r = arm_reg_current(arm, i);
- for (i=0; i<=15; i++)
- {
- LOG_DEBUG("r%i: 0x%8.8x", i, context[i]);
- buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).value, 0, 32, context[i]);
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).dirty = 0;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).valid = 1;
+ LOG_DEBUG("r%i: 0x%8.8" PRIx32 "", i, context[i]);
+
+ buf_set_u32(r->value, 0, 32, context[i]);
+ /* r0 and r15 (pc) have to be restored later */
+ r->dirty = (i == 0) || (i == 15);
+ r->valid = 1;
}
- LOG_DEBUG("entered debug state at PC 0x%x", context[15]);
-
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
- return ERROR_FAIL;
+ LOG_DEBUG("entered debug state at PC 0x%" PRIx32 "", context[15]);
/* exceptions other than USR & SYS have a saved program status register */
- if ((armv4_5->core_mode != ARMV4_5_MODE_USR) && (armv4_5->core_mode != ARMV4_5_MODE_SYS))
- {
- u32 spsr;
+ if (arm->spsr) {
+ uint32_t spsr;
arm7_9->read_xpsr(target, &spsr, 1);
- jtag_execute_queue();
- buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).value, 0, 32, spsr);
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).dirty = 0;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).valid = 1;
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
+ return retval;
+ buf_set_u32(arm->spsr->value, 0, 32, spsr);
+ arm->spsr->dirty = 0;
+ arm->spsr->valid = 1;
}
- /* r0 and r15 (pc) have to be restored later */
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 0).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 0).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 15).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 15).valid;
-
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
- if (arm7_9->post_debug_entry)
- arm7_9->post_debug_entry(target);
+ if (arm7_9->post_debug_entry) {
+ retval = arm7_9->post_debug_entry(target);
+ if (retval != ERROR_OK)
+ return retval;
+ }
return ERROR_OK;
}
-int arm7_9_full_context(target_t *target)
+/**
+ * Validate the full context for an ARM7/9 target in all processor modes. If
+ * there are any invalid registers for the target, they will all be read. This
+ * includes the PSR.
+ *
+ * @param target Pointer to the ARM7/9 target to capture the full context from
+ * @return Error if the target is not halted, has an invalid core mode, or if
+ * the JTAG queue fails to execute
+ */
+static int arm7_9_full_context(struct target *target)
{
int i;
int retval;
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
LOG_DEBUG("-");
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
+ if (!is_arm_mode(arm->core_mode)) {
+ LOG_ERROR("not a valid arm core mode - communication failure?");
return ERROR_FAIL;
+ }
/* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
* SYS shares registers with User, so we don't touch SYS
*/
- for(i = 0; i < 6; i++)
- {
- u32 mask = 0;
- u32* reg_p[16];
+ for (i = 0; i < 6; i++) {
+ uint32_t mask = 0;
+ uint32_t *reg_p[16];
int j;
int valid = 1;
/* check if there are invalid registers in the current mode
*/
- for (j = 0; j <= 16; j++)
- {
- if (ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).valid == 0)
+ for (j = 0; j <= 16; j++) {
+ if (ARMV4_5_CORE_REG_MODE(arm->core_cache, armv4_5_number_to_mode(i), j).valid == 0)
valid = 0;
}
- if (!valid)
- {
- u32 tmp_cpsr;
+ if (!valid) {
+ uint32_t tmp_cpsr;
/* change processor mode (and mask T bit) */
- tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
+ tmp_cpsr = buf_get_u32(arm->cpsr->value, 0, 8)
+ & 0xe0;
tmp_cpsr |= armv4_5_number_to_mode(i);
tmp_cpsr &= ~0x20;
arm7_9->write_xpsr_im8(target, tmp_cpsr & 0xff, 0, 0);
- for (j = 0; j < 15; j++)
- {
- if (ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).valid == 0)
- {
- reg_p[j] = (u32*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).value;
+ for (j = 0; j < 15; j++) {
+ if (ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ armv4_5_number_to_mode(i), j).valid == 0) {
+ reg_p[j] = (uint32_t *)ARMV4_5_CORE_REG_MODE(
+ arm->core_cache,
+ armv4_5_number_to_mode(i),
+ j).value;
mask |= 1 << j;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).valid = 1;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).dirty = 0;
+ ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ armv4_5_number_to_mode(i),
+ j).valid = 1;
+ ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ armv4_5_number_to_mode(i),
+ j).dirty = 0;
}
}
arm7_9->read_core_regs(target, mask, reg_p);
/* check if the PSR has to be read */
- if (ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).valid == 0)
- {
- arm7_9->read_xpsr(target, (u32*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).value, 1);
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).valid = 1;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).dirty = 0;
+ if (ARMV4_5_CORE_REG_MODE(arm->core_cache, armv4_5_number_to_mode(i),
+ 16).valid == 0) {
+ arm7_9->read_xpsr(target,
+ (uint32_t *)ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ armv4_5_number_to_mode(i), 16).value, 1);
+ ARMV4_5_CORE_REG_MODE(arm->core_cache, armv4_5_number_to_mode(i),
+ 16).valid = 1;
+ ARMV4_5_CORE_REG_MODE(arm->core_cache, armv4_5_number_to_mode(i),
+ 16).dirty = 0;
}
}
}
/* restore processor mode (mask T bit) */
- arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
+ arm7_9->write_xpsr_im8(target,
+ buf_get_u32(arm->cpsr->value, 0, 8) & ~0x20, 0, 0);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
- }
return ERROR_OK;
}
-int arm7_9_restore_context(target_t *target)
+/**
+ * Restore the processor context on an ARM7/9 target. The full processor
+ * context is analyzed to see if any of the registers are dirty on this end, but
+ * have a valid new value. If this is the case, the processor is changed to the
+ * appropriate mode and the new register values are written out to the
+ * processor. If there happens to be a dirty register with an invalid value, an
+ * error will be logged.
+ *
+ * @param target Pointer to the ARM7/9 target to have its context restored
+ * @return Error status if the target is not halted or the core mode in the
+ * armv4_5 struct is invalid.
+ */
+static int arm7_9_restore_context(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- reg_t *reg;
- armv4_5_core_reg_t *reg_arch_info;
- enum armv4_5_mode current_mode = armv4_5->core_mode;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
+ struct reg *reg;
+ enum arm_mode current_mode = arm->core_mode;
int i, j;
int dirty;
int mode_change;
LOG_DEBUG("-");
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (arm7_9->pre_restore_context)
arm7_9->pre_restore_context(target);
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
+ if (!is_arm_mode(arm->core_mode)) {
+ LOG_ERROR("not a valid arm core mode - communication failure?");
return ERROR_FAIL;
+ }
/* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
* SYS shares registers with User, so we don't touch SYS
*/
- for (i = 0; i < 6; i++)
- {
- LOG_DEBUG("examining %s mode", armv4_5_mode_strings[i]);
+ for (i = 0; i < 6; i++) {
+ LOG_DEBUG("examining %s mode",
+ arm_mode_name(arm->core_mode));
dirty = 0;
mode_change = 0;
/* check if there are dirty registers in the current mode
*/
- for (j = 0; j <= 16; j++)
- {
- reg = &ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j);
- reg_arch_info = reg->arch_info;
- if (reg->dirty == 1)
- {
- if (reg->valid == 1)
- {
+ for (j = 0; j <= 16; j++) {
+ reg = &ARMV4_5_CORE_REG_MODE(arm->core_cache, armv4_5_number_to_mode(i), j);
+ if (reg->dirty == 1) {
+ if (reg->valid == 1) {
dirty = 1;
LOG_DEBUG("examining dirty reg: %s", reg->name);
- if ((reg_arch_info->mode != ARMV4_5_MODE_ANY)
- && (reg_arch_info->mode != current_mode)
- && !((reg_arch_info->mode == ARMV4_5_MODE_USR) && (armv4_5->core_mode == ARMV4_5_MODE_SYS))
- && !((reg_arch_info->mode == ARMV4_5_MODE_SYS) && (armv4_5->core_mode == ARMV4_5_MODE_USR)))
- {
+ struct arm_reg *reg_arch_info;
+ reg_arch_info = reg->arch_info;
+ if ((reg_arch_info->mode != ARM_MODE_ANY)
+ && (reg_arch_info->mode != current_mode)
+ && !((reg_arch_info->mode == ARM_MODE_USR)
+ && (arm->core_mode == ARM_MODE_SYS))
+ && !((reg_arch_info->mode == ARM_MODE_SYS)
+ && (arm->core_mode == ARM_MODE_USR))) {
mode_change = 1;
LOG_DEBUG("require mode change");
}
- }
- else
- {
- LOG_ERROR("BUG: dirty register '%s', but no valid data", reg->name);
- }
+ } else
+ LOG_ERROR("BUG: dirty register '%s', but no valid data",
+ reg->name);
}
}
- if (dirty)
- {
- u32 mask = 0x0;
+ if (dirty) {
+ uint32_t mask = 0x0;
int num_regs = 0;
- u32 regs[16];
+ uint32_t regs[16];
- if (mode_change)
- {
- u32 tmp_cpsr;
+ if (mode_change) {
+ uint32_t tmp_cpsr;
/* change processor mode (mask T bit) */
- tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
+ tmp_cpsr = buf_get_u32(arm->cpsr->value,
+ 0, 8) & 0xe0;
tmp_cpsr |= armv4_5_number_to_mode(i);
tmp_cpsr &= ~0x20;
arm7_9->write_xpsr_im8(target, tmp_cpsr & 0xff, 0, 0);
current_mode = armv4_5_number_to_mode(i);
}
- for (j = 0; j <= 14; j++)
- {
- reg = &ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j);
- reg_arch_info = reg->arch_info;
-
+ for (j = 0; j <= 14; j++) {
+ reg = &ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ armv4_5_number_to_mode(i),
+ j);
- if (reg->dirty == 1)
- {
+ if (reg->dirty == 1) {
regs[j] = buf_get_u32(reg->value, 0, 32);
mask |= 1 << j;
num_regs++;
reg->dirty = 0;
reg->valid = 1;
- LOG_DEBUG("writing register %i of mode %s with value 0x%8.8x", j, armv4_5_mode_strings[i], regs[j]);
+ LOG_DEBUG("writing register %i mode %s "
+ "with value 0x%8.8" PRIx32, j,
+ arm_mode_name(arm->core_mode),
+ regs[j]);
}
}
if (mask)
- {
arm7_9->write_core_regs(target, mask, regs);
- }
- reg = &ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16);
+ reg =
+ &ARMV4_5_CORE_REG_MODE(arm->core_cache, armv4_5_number_to_mode(
+ i), 16);
+ struct arm_reg *reg_arch_info;
reg_arch_info = reg->arch_info;
- if ((reg->dirty) && (reg_arch_info->mode != ARMV4_5_MODE_ANY))
- {
- LOG_DEBUG("writing SPSR of mode %i with value 0x%8.8x", i, buf_get_u32(reg->value, 0, 32));
+ if ((reg->dirty) && (reg_arch_info->mode != ARM_MODE_ANY)) {
+ LOG_DEBUG("writing SPSR of mode %i with value 0x%8.8" PRIx32 "",
+ i,
+ buf_get_u32(reg->value, 0, 32));
arm7_9->write_xpsr(target, buf_get_u32(reg->value, 0, 32), 1);
}
}
}
- if ((armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty == 0) && (armv4_5->core_mode != current_mode))
- {
+ if (!arm->cpsr->dirty && (arm->core_mode != current_mode)) {
/* restore processor mode (mask T bit) */
- u32 tmp_cpsr;
+ uint32_t tmp_cpsr;
- tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
+ tmp_cpsr = buf_get_u32(arm->cpsr->value, 0, 8) & 0xE0;
tmp_cpsr |= armv4_5_number_to_mode(i);
tmp_cpsr &= ~0x20;
- LOG_DEBUG("writing lower 8 bit of cpsr with value 0x%2.2x", tmp_cpsr);
+ LOG_DEBUG("writing lower 8 bit of cpsr with value 0x%2.2x", (unsigned)(tmp_cpsr));
arm7_9->write_xpsr_im8(target, tmp_cpsr & 0xff, 0, 0);
- }
- else if (armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty == 1)
- {
+
+ } else if (arm->cpsr->dirty) {
/* CPSR has been changed, full restore necessary (mask T bit) */
- LOG_DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
- arm7_9->write_xpsr(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32) & ~0x20, 0);
- armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty = 0;
- armv4_5->core_cache->reg_list[ARMV4_5_CPSR].valid = 1;
+ LOG_DEBUG("writing cpsr with value 0x%8.8" PRIx32,
+ buf_get_u32(arm->cpsr->value, 0, 32));
+ arm7_9->write_xpsr(target,
+ buf_get_u32(arm->cpsr->value, 0, 32)
+ & ~0x20, 0);
+ arm->cpsr->dirty = 0;
+ arm->cpsr->valid = 1;
}
/* restore PC */
- LOG_DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- arm7_9->write_pc(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- armv4_5->core_cache->reg_list[15].dirty = 0;
-
- if (arm7_9->post_restore_context)
- arm7_9->post_restore_context(target);
+ LOG_DEBUG("writing PC with value 0x%8.8" PRIx32,
+ buf_get_u32(arm->pc->value, 0, 32));
+ arm7_9->write_pc(target, buf_get_u32(arm->pc->value, 0, 32));
+ arm->pc->dirty = 0;
return ERROR_OK;
}
-int arm7_9_restart_core(struct target_s *target)
+/**
+ * Restart the core of an ARM7/9 target. A RESTART command is sent to the
+ * instruction register and the JTAG state is set to TAP_IDLE causing a core
+ * restart.
+ *
+ * @param target Pointer to the ARM7/9 target to be restarted
+ * @return Result of executing the JTAG queue
+ */
+static int arm7_9_restart_core(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- arm_jtag_t *jtag_info = &arm7_9->jtag_info;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm_jtag *jtag_info = &arm7_9->jtag_info;
+ int retval;
/* set RESTART instruction */
- jtag_add_end_state(TAP_RTI);
if (arm7_9->need_bypass_before_restart) {
arm7_9->need_bypass_before_restart = 0;
- arm_jtag_set_instr(jtag_info, 0xf, NULL);
+
+ retval = arm_jtag_set_instr(jtag_info->tap, 0xf, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
}
- arm_jtag_set_instr(jtag_info, 0x4, NULL);
+ retval = arm_jtag_set_instr(jtag_info->tap, 0x4, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
- jtag_add_runtest(1, TAP_RTI);
+ jtag_add_runtest(1, TAP_IDLE);
return jtag_execute_queue();
}
-void arm7_9_enable_watchpoints(struct target_s *target)
+/**
+ * Enable the watchpoints on an ARM7/9 target. The target's watchpoints are
+ * iterated through and are set on the target if they aren't already set.
+ *
+ * @param target Pointer to the ARM7/9 target to enable watchpoints on
+ */
+static void arm7_9_enable_watchpoints(struct target *target)
{
- watchpoint_t *watchpoint = target->watchpoints;
+ struct watchpoint *watchpoint = target->watchpoints;
- while (watchpoint)
- {
+ while (watchpoint) {
if (watchpoint->set == 0)
arm7_9_set_watchpoint(target, watchpoint);
watchpoint = watchpoint->next;
}
}
-void arm7_9_enable_breakpoints(struct target_s *target)
+/**
+ * Enable the breakpoints on an ARM7/9 target. The target's breakpoints are
+ * iterated through and are set on the target.
+ *
+ * @param target Pointer to the ARM7/9 target to enable breakpoints on
+ */
+static void arm7_9_enable_breakpoints(struct target *target)
{
- breakpoint_t *breakpoint = target->breakpoints;
+ struct breakpoint *breakpoint = target->breakpoints;
/* set any pending breakpoints */
- while (breakpoint)
- {
+ while (breakpoint) {
arm7_9_set_breakpoint(target, breakpoint);
breakpoint = breakpoint->next;
}
}
-
-int arm7_9_resume(struct target_s *target, int current, u32 address, int handle_breakpoints, int debug_execution)
+int arm7_9_resume(struct target *target,
+ int current,
+ target_addr_t address,
+ int handle_breakpoints,
+ int debug_execution)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- breakpoint_t *breakpoint = target->breakpoints;
- reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
- int err;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
+ struct reg *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
+ int err, retval = ERROR_OK;
LOG_DEBUG("-");
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (!debug_execution)
- {
target_free_all_working_areas(target);
- }
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
+ buf_set_u32(arm->pc->value, 0, 32, address);
+
+ uint32_t current_pc;
+ current_pc = buf_get_u32(arm->pc->value, 0, 32);
/* the front-end may request us not to handle breakpoints */
- if (handle_breakpoints)
- {
- if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
- {
- LOG_DEBUG("unset breakpoint at 0x%8.8x", breakpoint->address);
- arm7_9_unset_breakpoint(target, breakpoint);
+ if (handle_breakpoints) {
+ struct breakpoint *breakpoint;
+ breakpoint = breakpoint_find(target,
+ buf_get_u32(arm->pc->value, 0, 32));
+ if (breakpoint != NULL) {
+ LOG_DEBUG("unset breakpoint at 0x%8.8" TARGET_PRIxADDR " (id: %" PRId32,
+ breakpoint->address,
+ breakpoint->unique_id);
+ retval = arm7_9_unset_breakpoint(target, breakpoint);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* calculate PC of next instruction */
+ uint32_t next_pc;
+ retval = arm_simulate_step(target, &next_pc);
+ if (retval != ERROR_OK) {
+ uint32_t current_opcode;
+ target_read_u32(target, current_pc, ¤t_opcode);
+ LOG_ERROR(
+ "Couldn't calculate PC of next instruction, current opcode was 0x%8.8" PRIx32 "",
+ current_opcode);
+ return retval;
+ }
LOG_DEBUG("enable single-step");
- arm7_9->enable_single_step(target);
+ arm7_9->enable_single_step(target, next_pc);
target->debug_reason = DBG_REASON_SINGLESTEP;
- arm7_9_restore_context(target);
+ retval = arm7_9_restore_context(target);
+ if (retval != ERROR_OK)
+ return retval;
- if (armv4_5->core_state == ARMV4_5_STATE_ARM)
+ if (arm->core_state == ARM_STATE_ARM)
arm7_9->branch_resume(target);
- else if (armv4_5->core_state == ARMV4_5_STATE_THUMB)
- {
+ else if (arm->core_state == ARM_STATE_THUMB)
arm7_9->branch_resume_thumb(target);
- }
- else
- {
+ else {
LOG_ERROR("unhandled core state");
return ERROR_FAIL;
}
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGACK, 1, 0);
- embeddedice_write_reg(dbg_ctrl, buf_get_u32(dbg_ctrl->value, 0, dbg_ctrl->size));
+ embeddedice_write_reg(dbg_ctrl,
+ buf_get_u32(dbg_ctrl->value, 0, dbg_ctrl->size));
err = arm7_9_execute_sys_speed(target);
LOG_DEBUG("disable single-step");
arm7_9->disable_single_step(target);
- if (err != ERROR_OK)
- {
- arm7_9_set_breakpoint(target, breakpoint);
+ if (err != ERROR_OK) {
+ retval = arm7_9_set_breakpoint(target, breakpoint);
+ if (retval != ERROR_OK)
+ return retval;
target->state = TARGET_UNKNOWN;
return err;
}
- arm7_9_debug_entry(target);
- LOG_DEBUG("new PC after step: 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ retval = arm7_9_debug_entry(target);
+ if (retval != ERROR_OK)
+ return retval;
+ LOG_DEBUG("new PC after step: 0x%8.8" PRIx32,
+ buf_get_u32(arm->pc->value, 0, 32));
- LOG_DEBUG("set breakpoint at 0x%8.8x", breakpoint->address);
- arm7_9_set_breakpoint(target, breakpoint);
+ LOG_DEBUG("set breakpoint at 0x%8.8" TARGET_PRIxADDR "", breakpoint->address);
+ retval = arm7_9_set_breakpoint(target, breakpoint);
+ if (retval != ERROR_OK)
+ return retval;
}
}
arm7_9_enable_breakpoints(target);
arm7_9_enable_watchpoints(target);
- arm7_9_restore_context(target);
+ retval = arm7_9_restore_context(target);
+ if (retval != ERROR_OK)
+ return retval;
- if (armv4_5->core_state == ARMV4_5_STATE_ARM)
- {
+ if (arm->core_state == ARM_STATE_ARM)
arm7_9->branch_resume(target);
- }
- else if (armv4_5->core_state == ARMV4_5_STATE_THUMB)
- {
+ else if (arm->core_state == ARM_STATE_THUMB)
arm7_9->branch_resume_thumb(target);
- }
- else
- {
+ else {
LOG_ERROR("unhandled core state");
return ERROR_FAIL;
}
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_INTDIS, 1, 0);
embeddedice_write_reg(dbg_ctrl, buf_get_u32(dbg_ctrl->value, 0, dbg_ctrl->size));
- arm7_9_restart_core(target);
+ retval = arm7_9_restart_core(target);
+ if (retval != ERROR_OK)
+ return retval;
target->debug_reason = DBG_REASON_NOTHALTED;
- if (!debug_execution)
- {
+ if (!debug_execution) {
/* registers are now invalid */
- armv4_5_invalidate_core_regs(target);
+ register_cache_invalidate(arm->core_cache);
target->state = TARGET_RUNNING;
- target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
- }
- else
- {
+ retval = target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
+ if (retval != ERROR_OK)
+ return retval;
+ } else {
target->state = TARGET_DEBUG_RUNNING;
- target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
+ retval = target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
+ if (retval != ERROR_OK)
+ return retval;
}
LOG_DEBUG("target resumed");
return ERROR_OK;
}
-void arm7_9_enable_eice_step(target_t *target)
+void arm7_9_enable_eice_step(struct target *target, uint32_t next_pc)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- /* setup an inverse breakpoint on the current PC
- * - comparator 1 matches the current address
- * - rangeout from comparator 1 is connected to comparator 0 rangein
- * - comparator 0 matches any address, as long as rangein is low */
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffff);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffff);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], ~(EICE_W_CTRL_RANGE|EICE_W_CTRL_nOPC) & 0xff);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE], buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], 0);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0xffffffff);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
+ uint32_t current_pc;
+ current_pc = buf_get_u32(arm->pc->value, 0, 32);
+
+ if (next_pc != current_pc) {
+ /* setup an inverse breakpoint on the current PC
+ * - comparator 1 matches the current address
+ * - rangeout from comparator 1 is connected to comparator 0 rangein
+ * - comparator 0 matches any address, as long as rangein is low */
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE],
+ EICE_W_CTRL_ENABLE);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK],
+ ~(EICE_W_CTRL_RANGE | EICE_W_CTRL_nOPC) & 0xff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE],
+ current_pc);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], 0);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK],
+ ~EICE_W_CTRL_nOPC & 0xff);
+ } else {
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], 0xff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE], next_pc);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], 0);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE],
+ EICE_W_CTRL_ENABLE);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK],
+ ~EICE_W_CTRL_nOPC & 0xff);
+ }
}
-void arm7_9_disable_eice_step(target_t *target)
+void arm7_9_disable_eice_step(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK]);
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK]);
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE]);
}
-int arm7_9_step(struct target_s *target, int current, u32 address, int handle_breakpoints)
+int arm7_9_step(struct target *target, int current, target_addr_t address, int handle_breakpoints)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- breakpoint_t *breakpoint = NULL;
- int err;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
+ struct breakpoint *breakpoint = NULL;
+ int err, retval;
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
+ buf_set_u32(arm->pc->value, 0, 32, address);
+
+ uint32_t current_pc = buf_get_u32(arm->pc->value, 0, 32);
/* the front-end may request us not to handle breakpoints */
if (handle_breakpoints)
- if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
- arm7_9_unset_breakpoint(target, breakpoint);
+ breakpoint = breakpoint_find(target, current_pc);
+ if (breakpoint != NULL) {
+ retval = arm7_9_unset_breakpoint(target, breakpoint);
+ if (retval != ERROR_OK)
+ return retval;
+ }
target->debug_reason = DBG_REASON_SINGLESTEP;
- arm7_9_restore_context(target);
+ /* calculate PC of next instruction */
+ uint32_t next_pc;
+ retval = arm_simulate_step(target, &next_pc);
+ if (retval != ERROR_OK) {
+ uint32_t current_opcode;
+ target_read_u32(target, current_pc, ¤t_opcode);
+ LOG_ERROR(
+ "Couldn't calculate PC of next instruction, current opcode was 0x%8.8" PRIx32 "",
+ current_opcode);
+ return retval;
+ }
+
+ retval = arm7_9_restore_context(target);
+ if (retval != ERROR_OK)
+ return retval;
- arm7_9->enable_single_step(target);
+ arm7_9->enable_single_step(target, next_pc);
- if (armv4_5->core_state == ARMV4_5_STATE_ARM)
- {
+ if (arm->core_state == ARM_STATE_ARM)
arm7_9->branch_resume(target);
- }
- else if (armv4_5->core_state == ARMV4_5_STATE_THUMB)
- {
+ else if (arm->core_state == ARM_STATE_THUMB)
arm7_9->branch_resume_thumb(target);
- }
- else
- {
+ else {
LOG_ERROR("unhandled core state");
return ERROR_FAIL;
}
- target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
+ retval = target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
+ if (retval != ERROR_OK)
+ return retval;
err = arm7_9_execute_sys_speed(target);
arm7_9->disable_single_step(target);
/* registers are now invalid */
- armv4_5_invalidate_core_regs(target);
+ register_cache_invalidate(arm->core_cache);
if (err != ERROR_OK)
- {
target->state = TARGET_UNKNOWN;
- } else {
- arm7_9_debug_entry(target);
- target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+ else {
+ retval = arm7_9_debug_entry(target);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+ if (retval != ERROR_OK)
+ return retval;
LOG_DEBUG("target stepped");
}
- if (breakpoint)
- arm7_9_set_breakpoint(target, breakpoint);
+ if (breakpoint) {
+ retval = arm7_9_set_breakpoint(target, breakpoint);
+ if (retval != ERROR_OK)
+ return retval;
+ }
return err;
-
}
-int arm7_9_read_core_reg(struct target_s *target, int num, enum armv4_5_mode mode)
+static int arm7_9_read_core_reg(struct target *target, struct reg *r,
+ int num, enum arm_mode mode)
{
- u32* reg_p[16];
- u32 value;
+ uint32_t *reg_p[16];
int retval;
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ struct arm_reg *areg = r->arch_info;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
+ if (!is_arm_mode(arm->core_mode))
return ERROR_FAIL;
-
- enum armv4_5_mode reg_mode = ((armv4_5_core_reg_t*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).arch_info)->mode;
-
if ((num < 0) || (num > 16))
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
- if ((mode != ARMV4_5_MODE_ANY)
- && (mode != armv4_5->core_mode)
- && (reg_mode != ARMV4_5_MODE_ANY))
- {
- u32 tmp_cpsr;
+ if ((mode != ARM_MODE_ANY) && (mode != arm->core_mode)
+ && (areg->mode != ARM_MODE_ANY)) {
+ uint32_t tmp_cpsr;
/* change processor mode (mask T bit) */
- tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
+ tmp_cpsr = buf_get_u32(arm->cpsr->value, 0, 8) & 0xE0;
tmp_cpsr |= mode;
tmp_cpsr &= ~0x20;
arm7_9->write_xpsr_im8(target, tmp_cpsr & 0xff, 0, 0);
}
- if ((num >= 0) && (num <= 15))
- {
+ uint32_t value = 0;
+ if ((num >= 0) && (num <= 15)) {
/* read a normal core register */
reg_p[num] = &value;
arm7_9->read_core_regs(target, 1 << num, reg_p);
- }
- else
- {
+ } else {
/* read a program status register
* if the register mode is MODE_ANY, we read the cpsr, otherwise a spsr
*/
- armv4_5_core_reg_t *arch_info = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).arch_info;
- int spsr = (arch_info->mode == ARMV4_5_MODE_ANY) ? 0 : 1;
-
- arm7_9->read_xpsr(target, &value, spsr);
+ arm7_9->read_xpsr(target, &value, areg->mode != ARM_MODE_ANY);
}
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
- }
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).valid = 1;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).dirty = 0;
- buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).value, 0, 32, value);
+ r->valid = 1;
+ r->dirty = 0;
+ buf_set_u32(r->value, 0, 32, value);
- if ((mode != ARMV4_5_MODE_ANY)
- && (mode != armv4_5->core_mode)
- && (reg_mode != ARMV4_5_MODE_ANY)) {
+ if ((mode != ARM_MODE_ANY) && (mode != arm->core_mode)
+ && (areg->mode != ARM_MODE_ANY)) {
/* restore processor mode (mask T bit) */
- arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
+ arm7_9->write_xpsr_im8(target,
+ buf_get_u32(arm->cpsr->value, 0, 8) & ~0x20, 0, 0);
}
return ERROR_OK;
-
}
-int arm7_9_write_core_reg(struct target_s *target, int num, enum armv4_5_mode mode, u32 value)
+static int arm7_9_write_core_reg(struct target *target, struct reg *r,
+ int num, enum arm_mode mode, uint8_t *value)
{
- u32 reg[16];
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ uint32_t reg[16];
+ struct arm_reg *areg = r->arch_info;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
+ if (!is_arm_mode(arm->core_mode))
return ERROR_FAIL;
-
- enum armv4_5_mode reg_mode = ((armv4_5_core_reg_t*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).arch_info)->mode;
-
if ((num < 0) || (num > 16))
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
- if ((mode != ARMV4_5_MODE_ANY)
- && (mode != armv4_5->core_mode)
- && (reg_mode != ARMV4_5_MODE_ANY)) {
- u32 tmp_cpsr;
+ if ((mode != ARM_MODE_ANY) && (mode != arm->core_mode)
+ && (areg->mode != ARM_MODE_ANY)) {
+ uint32_t tmp_cpsr;
/* change processor mode (mask T bit) */
- tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
+ tmp_cpsr = buf_get_u32(arm->cpsr->value, 0, 8) & 0xE0;
tmp_cpsr |= mode;
tmp_cpsr &= ~0x20;
arm7_9->write_xpsr_im8(target, tmp_cpsr & 0xff, 0, 0);
}
- if ((num >= 0) && (num <= 15))
- {
+ if ((num >= 0) && (num <= 15)) {
/* write a normal core register */
- reg[num] = value;
+ reg[num] = buf_get_u32(value, 0, 32);
arm7_9->write_core_regs(target, 1 << num, reg);
- }
- else
- {
+ } else {
/* write a program status register
* if the register mode is MODE_ANY, we write the cpsr, otherwise a spsr
*/
- armv4_5_core_reg_t *arch_info = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).arch_info;
- int spsr = (arch_info->mode == ARMV4_5_MODE_ANY) ? 0 : 1;
+ int spsr = (areg->mode != ARM_MODE_ANY);
+ uint32_t t = buf_get_u32(value, 0, 32);
/* if we're writing the CPSR, mask the T bit */
if (!spsr)
- value &= ~0x20;
+ t &= ~0x20;
- arm7_9->write_xpsr(target, value, spsr);
+ arm7_9->write_xpsr(target, t, spsr);
}
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).valid = 1;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).dirty = 0;
+ r->valid = 1;
+ r->dirty = 0;
- if ((mode != ARMV4_5_MODE_ANY)
- && (mode != armv4_5->core_mode)
- && (reg_mode != ARMV4_5_MODE_ANY)) {
+ if ((mode != ARM_MODE_ANY) && (mode != arm->core_mode)
+ && (areg->mode != ARM_MODE_ANY)) {
/* restore processor mode (mask T bit) */
- arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
+ arm7_9->write_xpsr_im8(target,
+ buf_get_u32(arm->cpsr->value, 0, 8) & ~0x20, 0, 0);
}
return jtag_execute_queue();
}
-int arm7_9_read_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
+int arm7_9_read_memory(struct target *target,
+ target_addr_t address,
+ uint32_t size,
+ uint32_t count,
+ uint8_t *buffer)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- u32 reg[16];
- int num_accesses = 0;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
+ uint32_t reg[16];
+ uint32_t num_accesses = 0;
int thisrun_accesses;
int i;
- u32 cpsr;
+ uint32_t cpsr;
int retval;
int last_reg = 0;
- LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
+ LOG_DEBUG("address: 0x%8.8" TARGET_PRIxADDR ", size: 0x%8.8" PRIx32 ", count: 0x%8.8" PRIx32 "",
+ address, size, count);
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* sanitize arguments */
if (((size != 4) && (size != 2) && (size != 1)) || (count == 0) || !(buffer))
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
reg[0] = address;
arm7_9->write_core_regs(target, 0x1, reg);
- int j=0;
+ int j = 0;
- switch (size)
- {
+ switch (size) {
case 4:
- while (num_accesses < count)
- {
- u32 reg_list;
- thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
+ while (num_accesses < count) {
+ uint32_t reg_list;
+ thisrun_accesses =
+ ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
if (last_reg <= thisrun_accesses)
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_sys_speed(target);
+ if (retval != ERROR_OK)
+ return retval;
arm7_9->read_core_regs_target_buffer(target, reg_list, buffer, 4);
buffer += thisrun_accesses * 4;
num_accesses += thisrun_accesses;
- if ((j++%1024)==0)
- {
+ if ((j++%1024) == 0)
keep_alive();
- }
}
break;
case 2:
- while (num_accesses < count)
- {
- u32 reg_list;
- thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
+ while (num_accesses < count) {
+ uint32_t reg_list;
+ thisrun_accesses =
+ ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
- for (i = 1; i <= thisrun_accesses; i++)
- {
+ for (i = 1; i <= thisrun_accesses; i++) {
if (i > last_reg)
- last_reg = i;
+ last_reg = i;
arm7_9->load_hword_reg(target, i);
/* fast memory reads are only safe when the target is running
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_sys_speed(target);
+ if (retval != ERROR_OK)
+ return retval;
+
}
arm7_9->read_core_regs_target_buffer(target, reg_list, buffer, 2);
buffer += thisrun_accesses * 2;
num_accesses += thisrun_accesses;
- if ((j++%1024)==0)
- {
+ if ((j++%1024) == 0)
keep_alive();
- }
}
break;
case 1:
- while (num_accesses < count)
- {
- u32 reg_list;
- thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
+ while (num_accesses < count) {
+ uint32_t reg_list;
+ thisrun_accesses =
+ ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
- for (i = 1; i <= thisrun_accesses; i++)
- {
+ for (i = 1; i <= thisrun_accesses; i++) {
if (i > last_reg)
last_reg = i;
arm7_9->load_byte_reg(target, i);
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_sys_speed(target);
+ if (retval != ERROR_OK)
+ return retval;
}
arm7_9->read_core_regs_target_buffer(target, reg_list, buffer, 1);
buffer += thisrun_accesses * 1;
num_accesses += thisrun_accesses;
- if ((j++%1024)==0)
- {
+ if ((j++%1024) == 0)
keep_alive();
- }
}
break;
- default:
- LOG_ERROR("BUG: we shouldn't get here");
- exit(-1);
- break;
}
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
+ if (!is_arm_mode(arm->core_mode))
return ERROR_FAIL;
- for (i=0; i<=last_reg; i++)
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).valid;
+ for (i = 0; i <= last_reg; i++) {
+ struct reg *r = arm_reg_current(arm, i);
+ r->dirty = r->valid;
+ }
arm7_9->read_xpsr(target, &cpsr, 0);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK) {
LOG_ERROR("JTAG error while reading cpsr");
return ERROR_TARGET_DATA_ABORT;
}
- if (((cpsr & 0x1f) == ARMV4_5_MODE_ABT) && (armv4_5->core_mode != ARMV4_5_MODE_ABT))
- {
- LOG_WARNING("memory read caused data abort (address: 0x%8.8x, size: 0x%x, count: 0x%x)", address, size, count);
+ if (((cpsr & 0x1f) == ARM_MODE_ABT) && (arm->core_mode != ARM_MODE_ABT)) {
+ LOG_WARNING(
+ "memory read caused data abort "
+ "(address: 0x%8.8" TARGET_PRIxADDR ", size: 0x%" PRIx32 ", count: 0x%" PRIx32 ")",
+ address,
+ size,
+ count);
- arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
+ arm7_9->write_xpsr_im8(target,
+ buf_get_u32(arm->cpsr->value, 0, 8)
+ & ~0x20, 0, 0);
return ERROR_TARGET_DATA_ABORT;
}
return ERROR_OK;
}
-int arm7_9_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
+int arm7_9_write_memory(struct target *target,
+ target_addr_t address,
+ uint32_t size,
+ uint32_t count,
+ const uint8_t *buffer)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ struct arm *arm = &arm7_9->arm;
+ struct reg *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
- u32 reg[16];
- int num_accesses = 0;
+ uint32_t reg[16];
+ uint32_t num_accesses = 0;
int thisrun_accesses;
int i;
- u32 cpsr;
+ uint32_t cpsr;
int retval;
int last_reg = 0;
LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
#endif
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* sanitize arguments */
if (((size != 4) && (size != 2) && (size != 1)) || (count == 0) || !(buffer))
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGACK, 1, 0);
embeddedice_store_reg(dbg_ctrl);
- switch (size)
- {
+ switch (size) {
case 4:
- while (num_accesses < count)
- {
- u32 reg_list;
- thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
+ while (num_accesses < count) {
+ uint32_t reg_list;
+ thisrun_accesses =
+ ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
- for (i = 1; i <= thisrun_accesses; i++)
- {
+ for (i = 1; i <= thisrun_accesses; i++) {
if (i > last_reg)
last_reg = i;
reg[i] = target_buffer_get_u32(target, buffer);
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
- else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
+ else {
+ retval = arm7_9_execute_sys_speed(target);
+
+ /*
+ * if memory writes are made when the clock is running slow
+ * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
+ * processor operations after a "reset halt" or "reset init",
+ * need to immediately stroke the keep alive or will end up with
+ * gdb "keep alive not sent error message" problem.
+ */
+
+ keep_alive();
+ }
+
+ if (retval != ERROR_OK)
+ return retval;
num_accesses += thisrun_accesses;
}
break;
case 2:
- while (num_accesses < count)
- {
- u32 reg_list;
- thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
+ while (num_accesses < count) {
+ uint32_t reg_list;
+ thisrun_accesses =
+ ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
- for (i = 1; i <= thisrun_accesses; i++)
- {
+ for (i = 1; i <= thisrun_accesses; i++) {
if (i > last_reg)
last_reg = i;
reg[i] = target_buffer_get_u16(target, buffer) & 0xffff;
arm7_9->write_core_regs(target, reg_list, reg);
- for (i = 1; i <= thisrun_accesses; i++)
- {
+ for (i = 1; i <= thisrun_accesses; i++) {
arm7_9->store_hword_reg(target, i);
/* fast memory writes are only safe when the target is running
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
- else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
+ else {
+ retval = arm7_9_execute_sys_speed(target);
+
+ /*
+ * if memory writes are made when the clock is running slow
+ * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
+ * processor operations after a "reset halt" or "reset init",
+ * need to immediately stroke the keep alive or will end up with
+ * gdb "keep alive not sent error message" problem.
+ */
+
+ keep_alive();
+ }
+
+ if (retval != ERROR_OK)
+ return retval;
}
num_accesses += thisrun_accesses;
}
break;
case 1:
- while (num_accesses < count)
- {
- u32 reg_list;
- thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
+ while (num_accesses < count) {
+ uint32_t reg_list;
+ thisrun_accesses =
+ ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
- for (i = 1; i <= thisrun_accesses; i++)
- {
+ for (i = 1; i <= thisrun_accesses; i++) {
if (i > last_reg)
last_reg = i;
reg[i] = *buffer++ & 0xff;
arm7_9->write_core_regs(target, reg_list, reg);
- for (i = 1; i <= thisrun_accesses; i++)
- {
+ for (i = 1; i <= thisrun_accesses; i++) {
arm7_9->store_byte_reg(target, i);
/* fast memory writes are only safe when the target is running
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
- else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
+ else {
+ retval = arm7_9_execute_sys_speed(target);
+
+ /*
+ * if memory writes are made when the clock is running slow
+ * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
+ * processor operations after a "reset halt" or "reset init",
+ * need to immediately stroke the keep alive or will end up with
+ * gdb "keep alive not sent error message" problem.
+ */
+
+ keep_alive();
+ }
+
+ if (retval != ERROR_OK)
+ return retval;
+
}
num_accesses += thisrun_accesses;
}
break;
- default:
- LOG_ERROR("BUG: we shouldn't get here");
- exit(-1);
- break;
}
/* Re-Set DBGACK */
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGACK, 1, 1);
embeddedice_store_reg(dbg_ctrl);
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
+ if (!is_arm_mode(arm->core_mode))
return ERROR_FAIL;
- for (i=0; i<=last_reg; i++)
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).valid;
+ for (i = 0; i <= last_reg; i++) {
+ struct reg *r = arm_reg_current(arm, i);
+ r->dirty = r->valid;
+ }
arm7_9->read_xpsr(target, &cpsr, 0);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK) {
LOG_ERROR("JTAG error while reading cpsr");
return ERROR_TARGET_DATA_ABORT;
}
- if (((cpsr & 0x1f) == ARMV4_5_MODE_ABT) && (armv4_5->core_mode != ARMV4_5_MODE_ABT))
- {
- LOG_WARNING("memory write caused data abort (address: 0x%8.8x, size: 0x%x, count: 0x%x)", address, size, count);
+ if (((cpsr & 0x1f) == ARM_MODE_ABT) && (arm->core_mode != ARM_MODE_ABT)) {
+ LOG_WARNING(
+ "memory write caused data abort "
+ "(address: 0x%8.8" TARGET_PRIxADDR ", size: 0x%" PRIx32 ", count: 0x%" PRIx32 ")",
+ address,
+ size,
+ count);
- arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
+ arm7_9->write_xpsr_im8(target,
+ buf_get_u32(arm->cpsr->value, 0, 8)
+ & ~0x20, 0, 0);
return ERROR_TARGET_DATA_ABORT;
}
return ERROR_OK;
}
-static const u32 dcc_code[] =
+int arm7_9_write_memory_opt(struct target *target,
+ target_addr_t address,
+ uint32_t size,
+ uint32_t count,
+ const uint8_t *buffer)
{
- /* MRC TST BNE MRC STR B */
- 0xee101e10, 0xe3110001, 0x0afffffc, 0xee111e10, 0xe4801004, 0xeafffff9
-};
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+ int retval;
-int arm7_9_bulk_write_memory(target_t *target, u32 address, u32 count, u8 *buffer)
-{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- enum armv4_5_state core_state = armv4_5->core_state;
- u32 r0 = buf_get_u32(armv4_5->core_cache->reg_list[0].value, 0, 32);
- u32 r1 = buf_get_u32(armv4_5->core_cache->reg_list[1].value, 0, 32);
- u32 pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
- int i;
+ if (size == 4 && count > 32 && arm7_9->bulk_write_memory) {
+ /* Attempt to do a bulk write */
+ retval = arm7_9->bulk_write_memory(target, address, count, buffer);
- if (!arm7_9->dcc_downloads)
- return target->type->write_memory(target, address, 4, count, buffer);
+ if (retval == ERROR_OK)
+ return ERROR_OK;
+ }
- /* regrab previously allocated working_area, or allocate a new one */
- if (!arm7_9->dcc_working_area)
- {
- u8 dcc_code_buf[6 * 4];
+ return arm7_9->write_memory(target, address, size, count, buffer);
+}
- /* make sure we have a working area */
- if (target_alloc_working_area(target, 24, &arm7_9->dcc_working_area) != ERROR_OK)
- {
- LOG_INFO("no working area available, falling back to memory writes");
- return target->type->write_memory(target, address, 4, count, buffer);
- }
+int arm7_9_write_memory_no_opt(struct target *target,
+ uint32_t address,
+ uint32_t size,
+ uint32_t count,
+ const uint8_t *buffer)
+{
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- /* copy target instructions to target endianness */
- for (i = 0; i < 6; i++)
- {
- target_buffer_set_u32(target, dcc_code_buf + i*4, dcc_code[i]);
- }
+ return arm7_9->write_memory(target, address, size, count, buffer);
+}
- /* write DCC code to working area */
- target->type->write_memory(target, arm7_9->dcc_working_area->address, 4, 6, dcc_code_buf);
- }
+static int dcc_count;
+static const uint8_t *dcc_buffer;
- buf_set_u32(armv4_5->core_cache->reg_list[0].value, 0, 32, address);
- armv4_5->core_cache->reg_list[0].valid = 1;
- armv4_5->core_cache->reg_list[0].dirty = 1;
- armv4_5->core_state = ARMV4_5_STATE_ARM;
+static int arm7_9_dcc_completion(struct target *target,
+ uint32_t exit_point,
+ int timeout_ms,
+ void *arch_info)
+{
+ int retval = ERROR_OK;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- arm7_9_resume(target, 0, arm7_9->dcc_working_area->address, 1, 1);
+ retval = target_wait_state(target, TARGET_DEBUG_RUNNING, 500);
+ if (retval != ERROR_OK)
+ return retval;
- int little=target->endianness==TARGET_LITTLE_ENDIAN;
- if (count>2)
- {
+ int little = target->endianness == TARGET_LITTLE_ENDIAN;
+ int count = dcc_count;
+ const uint8_t *buffer = dcc_buffer;
+ if (count > 2) {
/* Handle first & last using standard embeddedice_write_reg and the middle ones w/the
- core function repeated.
- */
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA], fast_target_buffer_get_u32(buffer, little));
- buffer+=4;
-
- embeddedice_reg_t *ice_reg = arm7_9->eice_cache->reg_list[EICE_COMMS_DATA].arch_info;
- u8 reg_addr = ice_reg->addr & 0x1f;
- int chain_pos = ice_reg->jtag_info->chain_pos;
-
- embeddedice_write_dcc(chain_pos, reg_addr, buffer, little, count-2);
+ * core function repeated. */
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA],
+ fast_target_buffer_get_u32(buffer, little));
+ buffer += 4;
+
+ struct embeddedice_reg *ice_reg =
+ arm7_9->eice_cache->reg_list[EICE_COMMS_DATA].arch_info;
+ uint8_t reg_addr = ice_reg->addr & 0x1f;
+ struct jtag_tap *tap;
+ tap = ice_reg->jtag_info->tap;
+
+ embeddedice_write_dcc(tap, reg_addr, buffer, little, count-2);
buffer += (count-2)*4;
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA], fast_target_buffer_get_u32(buffer, little));
- } else
- {
- for (i = 0; i < count; i++)
- {
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA], fast_target_buffer_get_u32(buffer, little));
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA],
+ fast_target_buffer_get_u32(buffer, little));
+ } else {
+ int i;
+ for (i = 0; i < count; i++) {
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA],
+ fast_target_buffer_get_u32(buffer, little));
buffer += 4;
}
}
- target_halt(target);
+ retval = target_halt(target);
+ if (retval != ERROR_OK)
+ return retval;
+ return target_wait_state(target, TARGET_HALTED, 500);
+}
- long long then=timeval_ms();
- int timeout;
- while (!(timeout=((timeval_ms()-then)>100)))
- {
- target_poll(target);
- if (target->state == TARGET_HALTED)
- break;
- if (debug_level>=3)
- {
- alive_sleep(100);
- } else
- {
- keep_alive();
- }
- }
- if (timeout)
- {
- LOG_ERROR("bulk write timed out, target not halted");
- return ERROR_TARGET_TIMEOUT;
- }
+static const uint32_t dcc_code[] = {
+ /* r0 == input, points to memory buffer
+ * r1 == scratch
+ */
- /* restore target state */
- buf_set_u32(armv4_5->core_cache->reg_list[0].value, 0, 32, r0);
- armv4_5->core_cache->reg_list[0].valid = 1;
- armv4_5->core_cache->reg_list[0].dirty = 1;
- buf_set_u32(armv4_5->core_cache->reg_list[1].value, 0, 32, r1);
- armv4_5->core_cache->reg_list[1].valid = 1;
- armv4_5->core_cache->reg_list[1].dirty = 1;
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, pc);
- armv4_5->core_cache->reg_list[15].valid = 1;
- armv4_5->core_cache->reg_list[15].dirty = 1;
- armv4_5->core_state = core_state;
+ /* spin until DCC control (c0) reports data arrived */
+ 0xee101e10, /* w: mrc p14, #0, r1, c0, c0 */
+ 0xe3110001, /* tst r1, #1 */
+ 0x0afffffc, /* bne w */
- return ERROR_OK;
-}
+ /* read word from DCC (c1), write to memory */
+ 0xee111e10, /* mrc p14, #0, r1, c1, c0 */
+ 0xe4801004, /* str r1, [r0], #4 */
+
+ /* repeat */
+ 0xeafffff9 /* b w */
+};
-int arm7_9_checksum_memory(struct target_s *target, u32 address, u32 count, u32* checksum)
+int arm7_9_bulk_write_memory(struct target *target,
+ target_addr_t address,
+ uint32_t count,
+ const uint8_t *buffer)
{
- working_area_t *crc_algorithm;
- armv4_5_algorithm_t armv4_5_info;
- reg_param_t reg_params[2];
int retval;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- u32 arm7_9_crc_code[] = {
- 0xE1A02000, /* mov r2, r0 */
- 0xE3E00000, /* mov r0, #0xffffffff */
- 0xE1A03001, /* mov r3, r1 */
- 0xE3A04000, /* mov r4, #0 */
- 0xEA00000B, /* b ncomp */
- /* nbyte: */
- 0xE7D21004, /* ldrb r1, [r2, r4] */
- 0xE59F7030, /* ldr r7, CRC32XOR */
- 0xE0200C01, /* eor r0, r0, r1, asl 24 */
- 0xE3A05000, /* mov r5, #0 */
- /* loop: */
- 0xE3500000, /* cmp r0, #0 */
- 0xE1A06080, /* mov r6, r0, asl #1 */
- 0xE2855001, /* add r5, r5, #1 */
- 0xE1A00006, /* mov r0, r6 */
- 0xB0260007, /* eorlt r0, r6, r7 */
- 0xE3550008, /* cmp r5, #8 */
- 0x1AFFFFF8, /* bne loop */
- 0xE2844001, /* add r4, r4, #1 */
- /* ncomp: */
- 0xE1540003, /* cmp r4, r3 */
- 0x1AFFFFF1, /* bne nbyte */
- /* end: */
- 0xEAFFFFFE, /* b end */
- 0x04C11DB7 /* CRC32XOR: .word 0x04C11DB7 */
- };
-
- int i;
+ if (address % 4 != 0)
+ return ERROR_TARGET_UNALIGNED_ACCESS;
- if (target_alloc_working_area(target, sizeof(arm7_9_crc_code), &crc_algorithm) != ERROR_OK)
- {
+ if (!arm7_9->dcc_downloads)
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- /* convert flash writing code into a buffer in target endianness */
- for (i = 0; i < (sizeof(arm7_9_crc_code)/sizeof(u32)); i++)
- {
- if ((retval=target_write_u32(target, crc_algorithm->address + i*sizeof(u32), arm7_9_crc_code[i]))!=ERROR_OK)
- {
- return retval;
+ /* regrab previously allocated working_area, or allocate a new one */
+ if (!arm7_9->dcc_working_area) {
+ uint8_t dcc_code_buf[6 * 4];
+
+ /* make sure we have a working area */
+ if (target_alloc_working_area(target, 24, &arm7_9->dcc_working_area) != ERROR_OK) {
+ LOG_INFO("no working area available, falling back to memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
+
+ /* copy target instructions to target endianness */
+ target_buffer_set_u32_array(target, dcc_code_buf, ARRAY_SIZE(dcc_code), dcc_code);
+
+ /* write DCC code to working area, using the non-optimized
+ * memory write to avoid ending up here again */
+ retval = arm7_9_write_memory_no_opt(target,
+ arm7_9->dcc_working_area->address, 4, 6, dcc_code_buf);
+ if (retval != ERROR_OK)
+ return retval;
}
- armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
- armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
- armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+ struct arm_algorithm arm_algo;
+ struct reg_param reg_params[1];
+
+ arm_algo.common_magic = ARM_COMMON_MAGIC;
+ arm_algo.core_mode = ARM_MODE_SVC;
+ arm_algo.core_state = ARM_STATE_ARM;
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);
- init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
- buf_set_u32(reg_params[1].value, 0, 32, count);
- if ((retval = target->type->run_algorithm(target, 0, NULL, 2, reg_params,
- crc_algorithm->address, crc_algorithm->address + (sizeof(arm7_9_crc_code) - 8), 20000, &armv4_5_info)) != ERROR_OK)
- {
- LOG_ERROR("error executing arm7_9 crc algorithm");
- destroy_reg_param(®_params[0]);
- destroy_reg_param(®_params[1]);
- target_free_working_area(target, crc_algorithm);
- return retval;
+ dcc_count = count;
+ dcc_buffer = buffer;
+ retval = armv4_5_run_algorithm_inner(target, 0, NULL, 1, reg_params,
+ arm7_9->dcc_working_area->address,
+ arm7_9->dcc_working_area->address + 6*4,
+ 20*1000, &arm_algo, arm7_9_dcc_completion);
+
+ if (retval == ERROR_OK) {
+ uint32_t endaddress = buf_get_u32(reg_params[0].value, 0, 32);
+ if (endaddress != (address + count*4)) {
+ LOG_ERROR(
+ "DCC write failed, expected end address 0x%08" TARGET_PRIxADDR " got 0x%0" PRIx32 "",
+ (address + count*4),
+ endaddress);
+ retval = ERROR_FAIL;
+ }
}
- *checksum = buf_get_u32(reg_params[0].value, 0, 32);
-
destroy_reg_param(®_params[0]);
- destroy_reg_param(®_params[1]);
-
- target_free_working_area(target, crc_algorithm);
- return ERROR_OK;
+ return retval;
}
-int arm7_9_blank_check_memory(struct target_s *target, u32 address, u32 count, u32* blank)
+/**
+ * Perform per-target setup that requires JTAG access.
+ */
+int arm7_9_examine(struct target *target)
{
- working_area_t *erase_check_algorithm;
- reg_param_t reg_params[3];
- armv4_5_algorithm_t armv4_5_info;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
int retval;
- int i;
-
- u32 erase_check_code[] =
- {
- /* loop: */
- 0xe4d03001, /* ldrb r3, [r0], #1 */
- 0xe0022003, /* and r2, r2, r3 */
- 0xe2511001, /* subs r1, r1, #1 */
- 0x1afffffb, /* bne loop */
- /* end: */
- 0xeafffffe /* b end */
- };
-
- /* make sure we have a working area */
- if (target_alloc_working_area(target, sizeof(erase_check_code), &erase_check_algorithm) != ERROR_OK)
- {
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- /* convert flash writing code into a buffer in target endianness */
- for (i = 0; i < (sizeof(erase_check_code)/sizeof(u32)); i++)
- target_write_u32(target, erase_check_algorithm->address + i*sizeof(u32), erase_check_code[i]);
- armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
- armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
- armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+ if (!target_was_examined(target)) {
+ struct reg_cache *t, **cache_p;
- init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
- buf_set_u32(reg_params[0].value, 0, 32, address);
+ t = embeddedice_build_reg_cache(target, arm7_9);
+ if (t == NULL)
+ return ERROR_FAIL;
- init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
- buf_set_u32(reg_params[1].value, 0, 32, count);
+ cache_p = register_get_last_cache_p(&target->reg_cache);
+ (*cache_p) = t;
+ arm7_9->eice_cache = (*cache_p);
- init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
- buf_set_u32(reg_params[2].value, 0, 32, 0xff);
+ if (arm7_9->arm.etm)
+ (*cache_p)->next = etm_build_reg_cache(target,
+ &arm7_9->jtag_info,
+ arm7_9->arm.etm);
- if ((retval = target->type->run_algorithm(target, 0, NULL, 3, reg_params,
- erase_check_algorithm->address, erase_check_algorithm->address + (sizeof(erase_check_code) - 4), 10000, &armv4_5_info)) != ERROR_OK)
- {
- destroy_reg_param(®_params[0]);
- destroy_reg_param(®_params[1]);
- destroy_reg_param(®_params[2]);
- target_free_working_area(target, erase_check_algorithm);
- return 0;
+ target_set_examined(target);
}
- *blank = buf_get_u32(reg_params[2].value, 0, 32);
-
- destroy_reg_param(®_params[0]);
- destroy_reg_param(®_params[1]);
- destroy_reg_param(®_params[2]);
-
- target_free_working_area(target, erase_check_algorithm);
-
- return ERROR_OK;
+ retval = embeddedice_setup(target);
+ if (retval == ERROR_OK)
+ retval = arm7_9_setup(target);
+ if (retval == ERROR_OK && arm7_9->arm.etm)
+ retval = etm_setup(target);
+ return retval;
}
-int arm7_9_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *arm7_9_cmd;
-
- arm7_9_cmd = register_command(cmd_ctx, NULL, "arm7_9", NULL, COMMAND_ANY, "arm7/9 specific commands");
-
- register_command(cmd_ctx, arm7_9_cmd, "write_xpsr", handle_arm7_9_write_xpsr_command, COMMAND_EXEC, "write program status register <value> <not cpsr|spsr>");
- register_command(cmd_ctx, arm7_9_cmd, "write_xpsr_im8", handle_arm7_9_write_xpsr_im8_command, COMMAND_EXEC, "write program status register <8bit immediate> <rotate> <not cpsr|spsr>");
-
- register_command(cmd_ctx, arm7_9_cmd, "write_core_reg", handle_arm7_9_write_core_reg_command, COMMAND_EXEC, "write core register <num> <mode> <value>");
-
- register_command(cmd_ctx, arm7_9_cmd, "dbgrq", handle_arm7_9_dbgrq_command,
- COMMAND_ANY, "use EmbeddedICE dbgrq instead of breakpoint for target halt requests <enable|disable>");
- register_command(cmd_ctx, arm7_9_cmd, "fast_writes", handle_arm7_9_fast_memory_access_command,
- COMMAND_ANY, "(deprecated, see: arm7_9 fast_memory_access)");
- register_command(cmd_ctx, arm7_9_cmd, "fast_memory_access", handle_arm7_9_fast_memory_access_command,
- COMMAND_ANY, "use fast memory accesses instead of slower but potentially unsafe slow accesses <enable|disable>");
- register_command(cmd_ctx, arm7_9_cmd, "dcc_downloads", handle_arm7_9_dcc_downloads_command,
- COMMAND_ANY, "use DCC downloads for larger memory writes <enable|disable>");
-
- armv4_5_register_commands(cmd_ctx);
-
- etm_register_commands(cmd_ctx);
-
- return ERROR_OK;
-}
-int handle_arm7_9_write_xpsr_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+int arm7_9_check_reset(struct target *target)
{
- u32 value;
- int spsr;
- int retval;
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- arm7_9_common_t *arm7_9;
-
- if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
- {
- command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
- return ERROR_OK;
- }
-
- if (target->state != TARGET_HALTED)
- {
- command_print(cmd_ctx, "can't write registers while running");
- return ERROR_OK;
- }
-
- if (argc < 2)
- {
- command_print(cmd_ctx, "usage: write_xpsr <value> <not cpsr|spsr>");
- return ERROR_OK;
- }
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- value = strtoul(args[0], NULL, 0);
- spsr = strtol(args[1], NULL, 0);
+ if (get_target_reset_nag() && !arm7_9->dcc_downloads)
+ LOG_WARNING(
+ "NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.");
- /* if we're writing the CPSR, mask the T bit */
- if (!spsr)
- value &= ~0x20;
+ if (get_target_reset_nag() && (target->working_area_size == 0))
+ LOG_WARNING("NOTE! Severe performance degradation without working memory enabled.");
- arm7_9->write_xpsr(target, value, spsr);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
- LOG_ERROR("JTAG error while writing to xpsr");
- return retval;
- }
+ if (get_target_reset_nag() && !arm7_9->fast_memory_access)
+ LOG_WARNING(
+ "NOTE! Severe performance degradation without fast memory access enabled. Type 'help fast'.");
return ERROR_OK;
}
-int handle_arm7_9_write_xpsr_im8_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+int arm7_9_endianness_callback(jtag_callback_data_t pu8_in,
+ jtag_callback_data_t i_size, jtag_callback_data_t i_be,
+ jtag_callback_data_t i_flip)
{
- u32 value;
- int rotate;
- int spsr;
- int retval;
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- arm7_9_common_t *arm7_9;
-
- if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
- {
- command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
- return ERROR_OK;
- }
-
- if (target->state != TARGET_HALTED)
- {
- command_print(cmd_ctx, "can't write registers while running");
- return ERROR_OK;
- }
-
- if (argc < 3)
- {
- command_print(cmd_ctx, "usage: write_xpsr_im8 <im8> <rotate> <not cpsr|spsr>");
- return ERROR_OK;
- }
-
- value = strtoul(args[0], NULL, 0);
- rotate = strtol(args[1], NULL, 0);
- spsr = strtol(args[2], NULL, 0);
-
- arm7_9->write_xpsr_im8(target, value, rotate, spsr);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
- LOG_ERROR("JTAG error while writing 8-bit immediate to xpsr");
- return retval;
+ uint8_t *in = (uint8_t *)pu8_in;
+ int size = (int)i_size;
+ int be = (int)i_be;
+ int flip = (int)i_flip;
+ uint32_t readback;
+
+ switch (size) {
+ case 4:
+ readback = le_to_h_u32(in);
+ if (flip)
+ readback = flip_u32(readback, 32);
+ if (be)
+ h_u32_to_be(in, readback);
+ else
+ h_u32_to_le(in, readback);
+ break;
+ case 2:
+ readback = le_to_h_u16(in);
+ if (flip)
+ readback = flip_u32(readback, 16);
+ if (be)
+ h_u16_to_be(in, readback & 0xffff);
+ else
+ h_u16_to_le(in, readback & 0xffff);
+ break;
+ case 1:
+ readback = *in;
+ if (flip)
+ readback = flip_u32(readback, 8);
+ *in = readback & 0xff;
+ break;
}
return ERROR_OK;
}
-int handle_arm7_9_write_core_reg_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(handle_arm7_9_dbgrq_command)
{
- u32 value;
- u32 mode;
- int num;
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- arm7_9_common_t *arm7_9;
-
- if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
- {
- command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
- return ERROR_OK;
- }
+ struct target *target = get_current_target(CMD_CTX);
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- if (target->state != TARGET_HALTED)
- {
- command_print(cmd_ctx, "can't write registers while running");
- return ERROR_OK;
- }
-
- if (argc < 3)
- {
- command_print(cmd_ctx, "usage: write_core_reg <num> <mode> <value>");
- return ERROR_OK;
+ if (!is_arm7_9(arm7_9)) {
+ command_print(CMD_CTX, "current target isn't an ARM7/ARM9 target");
+ return ERROR_TARGET_INVALID;
}
- num = strtol(args[0], NULL, 0);
- mode = strtoul(args[1], NULL, 0);
- value = strtoul(args[2], NULL, 0);
+ if (CMD_ARGC > 0)
+ COMMAND_PARSE_ENABLE(CMD_ARGV[0], arm7_9->use_dbgrq);
- arm7_9_write_core_reg(target, num, mode, value);
+ command_print(CMD_CTX,
+ "use of EmbeddedICE dbgrq instead of breakpoint for target halt %s",
+ (arm7_9->use_dbgrq) ? "enabled" : "disabled");
return ERROR_OK;
}
-
-int handle_arm7_9_dbgrq_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(handle_arm7_9_fast_memory_access_command)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- arm7_9_common_t *arm7_9;
+ struct target *target = get_current_target(CMD_CTX);
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
- {
- command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
- return ERROR_OK;
+ if (!is_arm7_9(arm7_9)) {
+ command_print(CMD_CTX, "current target isn't an ARM7/ARM9 target");
+ return ERROR_TARGET_INVALID;
}
- if (argc > 0)
- {
- if (strcmp("enable", args[0]) == 0)
- {
- arm7_9->use_dbgrq = 1;
- }
- else if (strcmp("disable", args[0]) == 0)
- {
- arm7_9->use_dbgrq = 0;
- }
- else
- {
- command_print(cmd_ctx, "usage: arm7_9 dbgrq <enable|disable>");
- }
- }
+ if (CMD_ARGC > 0)
+ COMMAND_PARSE_ENABLE(CMD_ARGV[0], arm7_9->fast_memory_access);
- command_print(cmd_ctx, "use of EmbeddedICE dbgrq instead of breakpoint for target halt %s", (arm7_9->use_dbgrq) ? "enabled" : "disabled");
+ command_print(CMD_CTX,
+ "fast memory access is %s",
+ (arm7_9->fast_memory_access) ? "enabled" : "disabled");
return ERROR_OK;
}
-int handle_arm7_9_fast_memory_access_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(handle_arm7_9_dcc_downloads_command)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- arm7_9_common_t *arm7_9;
+ struct target *target = get_current_target(CMD_CTX);
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
- {
- command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
- return ERROR_OK;
+ if (!is_arm7_9(arm7_9)) {
+ command_print(CMD_CTX, "current target isn't an ARM7/ARM9 target");
+ return ERROR_TARGET_INVALID;
}
- if (argc > 0)
- {
- if (strcmp("enable", args[0]) == 0)
- {
- arm7_9->fast_memory_access = 1;
- }
- else if (strcmp("disable", args[0]) == 0)
- {
- arm7_9->fast_memory_access = 0;
- }
- else
- {
- command_print(cmd_ctx, "usage: arm7_9 fast_memory_access <enable|disable>");
- }
- }
+ if (CMD_ARGC > 0)
+ COMMAND_PARSE_ENABLE(CMD_ARGV[0], arm7_9->dcc_downloads);
- command_print(cmd_ctx, "fast memory access is %s", (arm7_9->fast_memory_access) ? "enabled" : "disabled");
+ command_print(CMD_CTX,
+ "dcc downloads are %s",
+ (arm7_9->dcc_downloads) ? "enabled" : "disabled");
return ERROR_OK;
}
-int handle_arm7_9_dcc_downloads_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+static int arm7_9_setup_semihosting(struct target *target, int enable)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- arm7_9_common_t *arm7_9;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
- {
- command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
- return ERROR_OK;
+ if (!is_arm7_9(arm7_9)) {
+ LOG_USER("current target isn't an ARM7/ARM9 target");
+ return ERROR_TARGET_INVALID;
}
- if (argc > 0)
- {
- if (strcmp("enable", args[0]) == 0)
- {
- arm7_9->dcc_downloads = 1;
- }
- else if (strcmp("disable", args[0]) == 0)
- {
- arm7_9->dcc_downloads = 0;
- }
+ if (arm7_9->has_vector_catch) {
+ struct reg *vector_catch = &arm7_9->eice_cache
+ ->reg_list[EICE_VEC_CATCH];
+
+ if (!vector_catch->valid)
+ embeddedice_read_reg(vector_catch);
+ buf_set_u32(vector_catch->value, 2, 1, enable);
+ embeddedice_store_reg(vector_catch);
+ } else {
+ /* TODO: allow optional high vectors and/or BKPT_HARD */
+ if (enable)
+ breakpoint_add(target, 8, 4, BKPT_SOFT);
else
- {
- command_print(cmd_ctx, "usage: arm7_9 dcc_downloads <enable|disable>");
- }
+ breakpoint_remove(target, 8);
}
- command_print(cmd_ctx, "dcc downloads are %s", (arm7_9->dcc_downloads) ? "enabled" : "disabled");
-
return ERROR_OK;
}
-int arm7_9_init_arch_info(target_t *target, arm7_9_common_t *arm7_9)
+int arm7_9_init_arch_info(struct target *target, struct arm7_9_common *arm7_9)
{
- armv4_5_common_t *armv4_5 = &arm7_9->armv4_5_common;
+ int retval = ERROR_OK;
+ struct arm *arm = &arm7_9->arm;
arm7_9->common_magic = ARM7_9_COMMON_MAGIC;
- arm_jtag_setup_connection(&arm7_9->jtag_info);
- arm7_9->wp_available = 0; /* this is set up in arm7_9_clear_watchpoints() */
- arm7_9->wp_available_max = 2;
- arm7_9->sw_breakpoints_added = 0;
- arm7_9->breakpoint_count = 0;
- arm7_9->wp0_used = 0;
- arm7_9->wp1_used = 0;
- arm7_9->wp1_used_default = 0;
- arm7_9->use_dbgrq = 0;
-
- arm7_9->etm_ctx = NULL;
- arm7_9->has_single_step = 0;
- arm7_9->has_monitor_mode = 0;
- arm7_9->has_vector_catch = 0;
-
- arm7_9->debug_entry_from_reset = 0;
-
- arm7_9->dcc_working_area = NULL;
+ retval = arm_jtag_setup_connection(&arm7_9->jtag_info);
+ if (retval != ERROR_OK)
+ return retval;
- arm7_9->fast_memory_access = fast_and_dangerous;
- arm7_9->dcc_downloads = fast_and_dangerous;
+ /* caller must have allocated via calloc(), so everything's zeroed */
- arm7_9->need_bypass_before_restart = 0;
+ arm7_9->wp_available_max = 2;
- armv4_5->arch_info = arm7_9;
- armv4_5->read_core_reg = arm7_9_read_core_reg;
- armv4_5->write_core_reg = arm7_9_write_core_reg;
- armv4_5->full_context = arm7_9_full_context;
+ arm7_9->fast_memory_access = false;
+ arm7_9->dcc_downloads = false;
- armv4_5_init_arch_info(target, armv4_5);
+ arm->arch_info = arm7_9;
+ arm->core_type = ARM_MODE_ANY;
+ arm->read_core_reg = arm7_9_read_core_reg;
+ arm->write_core_reg = arm7_9_write_core_reg;
+ arm->full_context = arm7_9_full_context;
+ arm->setup_semihosting = arm7_9_setup_semihosting;
- target_register_timer_callback(arm7_9_handle_target_request, 1, 1, target);
+ retval = arm_init_arch_info(target, arm);
+ if (retval != ERROR_OK)
+ return retval;
- return ERROR_OK;
+ return target_register_timer_callback(arm7_9_handle_target_request,
+ 1, 1, target);
}
+
+static const struct command_registration arm7_9_any_command_handlers[] = {
+ {
+ "dbgrq",
+ .handler = handle_arm7_9_dbgrq_command,
+ .mode = COMMAND_ANY,
+ .usage = "['enable'|'disable']",
+ .help = "use EmbeddedICE dbgrq instead of breakpoint "
+ "for target halt requests",
+ },
+ {
+ "fast_memory_access",
+ .handler = handle_arm7_9_fast_memory_access_command,
+ .mode = COMMAND_ANY,
+ .usage = "['enable'|'disable']",
+ .help = "use fast memory accesses instead of slower "
+ "but potentially safer accesses",
+ },
+ {
+ "dcc_downloads",
+ .handler = handle_arm7_9_dcc_downloads_command,
+ .mode = COMMAND_ANY,
+ .usage = "['enable'|'disable']",
+ .help = "use DCC downloads for larger memory writes",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+const struct command_registration arm7_9_command_handlers[] = {
+ {
+ .chain = arm_command_handlers,
+ },
+ {
+ .chain = etm_command_handlers,
+ },
+ {
+ .name = "arm7_9",
+ .mode = COMMAND_ANY,
+ .help = "arm7/9 specific commands",
+ .usage = "",
+ .chain = arm7_9_any_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};