arm_adi_v5: Split CSW bits into AHB/APB/AXI
[openocd.git] / src / target / arm720t.c
index bcbfa9dff035934a356792abce4e0205ae04daef..abe5f1cea0bf03e9e6108dbfaf4bed3176b087bb 100644 (file)
@@ -233,11 +233,11 @@ static void arm720t_pre_restore_context(struct target *target)
        arm720t_write_cp15(target, 0xee060f10, arm720t->far_reg);
 }
 
-static int arm720t_verify_pointer(struct command_context *cmd_ctx,
+static int arm720t_verify_pointer(struct command_invocation *cmd,
                struct arm720t_common *arm720t)
 {
        if (arm720t->common_magic != ARM720T_COMMON_MAGIC) {
-               command_print(cmd_ctx, "target is not an ARM720");
+               command_print(cmd, "target is not an ARM720");
                return ERROR_TARGET_INVALID;
        }
        return ERROR_OK;
@@ -365,12 +365,12 @@ static int arm720t_soft_reset_halt(struct target *target)
        cpsr &= ~0xff;
        cpsr |= 0xd3;
        arm_set_cpsr(arm, cpsr);
-       arm->cpsr->dirty = 1;
+       arm->cpsr->dirty = true;
 
        /* start fetching from 0x0 */
        buf_set_u32(arm->pc->value, 0, 32, 0x0);
-       arm->pc->dirty = 1;
-       arm->pc->valid = 1;
+       arm->pc->dirty = true;
+       arm->pc->valid = true;
 
        retval = arm720t_disable_mmu_caches(target, 1, 1, 1);
        if (retval != ERROR_OK)
@@ -442,12 +442,12 @@ COMMAND_HANDLER(arm720t_handle_cp15_command)
        struct target *target = get_current_target(CMD_CTX);
        struct arm720t_common *arm720t = target_to_arm720(target);
 
-       retval = arm720t_verify_pointer(CMD_CTX, arm720t);
+       retval = arm720t_verify_pointer(CMD, arm720t);
        if (retval != ERROR_OK)
                return retval;
 
        if (target->state != TARGET_HALTED) {
-               command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
+               command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME);
                return ERROR_OK;
        }
 
@@ -460,7 +460,7 @@ COMMAND_HANDLER(arm720t_handle_cp15_command)
                        uint32_t value;
                        retval = arm720t_read_cp15(target, opcode, &value);
                        if (retval != ERROR_OK) {
-                               command_print(CMD_CTX, "couldn't access cp15 with opcode 0x%8.8" PRIx32 "", opcode);
+                               command_print(CMD, "couldn't access cp15 with opcode 0x%8.8" PRIx32 "", opcode);
                                return ERROR_OK;
                        }
 
@@ -468,17 +468,17 @@ COMMAND_HANDLER(arm720t_handle_cp15_command)
                        if (retval != ERROR_OK)
                                return retval;
 
-                       command_print(CMD_CTX, "0x%8.8" PRIx32 ": 0x%8.8" PRIx32 "", opcode, value);
+                       command_print(CMD, "0x%8.8" PRIx32 ": 0x%8.8" PRIx32 "", opcode, value);
                } else if (CMD_ARGC == 2) {
                        uint32_t value;
                        COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
 
                        retval = arm720t_write_cp15(target, opcode, value);
                        if (retval != ERROR_OK) {
-                               command_print(CMD_CTX, "couldn't access cp15 with opcode 0x%8.8" PRIx32 "", opcode);
+                               command_print(CMD, "couldn't access cp15 with opcode 0x%8.8" PRIx32 "", opcode);
                                return ERROR_OK;
                        }
-                       command_print(CMD_CTX, "0x%8.8" PRIx32 ": 0x%8.8" PRIx32 "", opcode, value);
+                       command_print(CMD, "0x%8.8" PRIx32 ": 0x%8.8" PRIx32 "", opcode, value);
                }
        }
 
@@ -560,6 +560,7 @@ struct target_type arm720t_target = {
        .deassert_reset = arm7_9_deassert_reset,
        .soft_reset_halt = arm720t_soft_reset_halt,
 
+       .get_gdb_arch = arm_get_gdb_arch,
        .get_gdb_reg_list = arm_get_gdb_reg_list,
 
        .read_memory = arm720t_read_memory,

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)