* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
- * Copyright (C) 2007,2008 Øyvind Harboe *
+ * Copyright (C) 2007,2008 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* Copyright (C) 2008 by Spencer Oliver *
#define _DEBUG_GDB_IO_
#endif
+static gdb_connection_t *current_gdb_connection;
+
static int gdb_breakpoint_override;
static enum breakpoint_type gdb_breakpoint_override_type;
break;
if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
return retval;
- if (reply == '$' ){
+ if (reply == '$') {
/* fix a problem with some IAR tools */
- gdb_putback_char(connection, reply );
+ gdb_putback_char(connection, reply);
LOG_DEBUG("Unexpected start of new packet");
break;
}
log_remove_callback(gdb_log_callback, connection);
LOG_WARNING("negative reply, retrying");
}
- else if (reply == '$' ){
+ else if (reply == '$') {
LOG_ERROR("GDB missing ack(1) - assumed good");
- gdb_putback_char(connection, reply );
+ gdb_putback_char(connection, reply);
return ERROR_OK;
} else {
return ERROR_SERVER_REMOTE_CLOSED;
}
}
- else if (reply == '$' ){
+ else if (reply == '$') {
LOG_ERROR("GDB missing ack(2) - assumed good");
- gdb_putback_char(connection, reply );
+ gdb_putback_char(connection, reply);
return ERROR_OK;
}
else
{
gdb_connection_t *gdb_connection = connection->priv;
- /* In the GDB protocol when we are stepping or coninuing execution,
+ /* In the GDB protocol when we are stepping or continuing execution,
* we have a lingering reply. Upon receiving a halted event
* when we have that lingering packet, we reply to the original
* step or continue packet.
int retval;
connection_t *connection = priv;
- target_handle_event(target, event );
+ target_handle_event(target, event);
switch (event)
{
- case TARGET_EVENT_EARLY_HALTED:
+ case TARGET_EVENT_GDB_HALT:
gdb_frontend_halted(target, connection);
break;
case TARGET_EVENT_HALTED:
target_call_event_callbacks(target, TARGET_EVENT_GDB_END);
break;
case TARGET_EVENT_GDB_FLASH_ERASE_START:
- target_handle_event(target, TARGET_EVENT_OLD_gdb_program_config );
+ target_handle_event(target, TARGET_EVENT_OLD_gdb_program_config);
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
return retval;
gdb_connection->closed = 0;
gdb_connection->busy = 0;
gdb_connection->noack_mode = 0;
+ gdb_connection->sync = true;
/* send ACK to GDB for debug request */
gdb_write(connection, "+", 1);
/* register callback to be informed about target events */
target_register_event_callback(gdb_target_callback_event_handler, connection);
- /* a gdb session just attached, try to put the target in halt mode.
- *
- * DANGER!!!!
- *
- * If the halt fails(e.g. target needs a reset, JTAG communication not
- * working, etc.), then the GDB connect will succeed as
- * the get_gdb_reg_list() will lie and return a register list with
- * dummy values.
- *
- * This allows GDB monitor commands to be run from a GDB init script to
- * initialize the target
- *
- * Also, since the halt() is asynchronous target connect will be
- * instantaneous and thus avoiding annoying timeout problems during
- * connect.
- */
- target_halt(gdb_service->target);
- /* FIX!!!! could extended-remote work better here?
- *
- * wait a tiny bit for halted state or we just continue. The
- * GDB register packet will then contain garbage
- */
- target_wait_state(gdb_service->target, TARGET_HALTED, 500);
-
/* remove the initial ACK from the incoming buffer */
if ((retval = gdb_get_char(connection, &initial_ack)) != ERROR_OK)
return retval;
*/
if (initial_ack != '+')
gdb_putback_char(connection, initial_ack);
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_ATTACH );
+ target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_ATTACH);
gdb_actual_connections++;
+ LOG_DEBUG("New GDB Connection: %d, Target %s, state: %s",
+ gdb_actual_connections,
+ gdb_service->target->cmd_name,
+ target_state_name(gdb_service->target));
return ERROR_OK;
}
gdb_service_t *gdb_service = connection->service->priv;
gdb_connection_t *gdb_connection = connection->priv;
+ /* we're done forwarding messages. Tear down callback before
+ * cleaning up connection.
+ */
+ log_remove_callback(gdb_log_callback, connection);
+
gdb_actual_connections--;
+ LOG_DEBUG("GDB Close, Target: %s, state: %s, gdb_actual_connections=%d",
+ gdb_service->target->cmd_name,
+ target_state_name(gdb_service->target),
+ gdb_actual_connections);
/* see if an image built with vFlash commands is left */
if (gdb_connection->vflash_image)
LOG_ERROR("BUG: connection->priv == NULL");
}
+
target_unregister_event_callback(gdb_target_callback_event_handler, connection);
+
target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_END);
- log_remove_callback(gdb_log_callback, connection);
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_DETACH );
+ target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_DETACH);
return ERROR_OK;
}
void gdb_send_error(connection_t *connection, uint8_t the_error)
{
char err[4];
- snprintf(err, 4, "E%2.2X", the_error );
+ snprintf(err, 4, "E%2.2X", the_error);
gdb_put_packet(connection, err, 3);
}
if (packet[0] == 'c')
{
LOG_DEBUG("continue");
- target_handle_event(target, TARGET_EVENT_OLD_pre_resume );
+ target_handle_event(target, TARGET_EVENT_OLD_pre_resume);
retval = target_resume(target, current, address, 0, 0); /* resume at current address, don't handle breakpoints, not debugging */
}
else if (packet[0] == 's')
/* We want to print all debug output to GDB connection */
log_add_callback(gdb_log_callback, connection);
target_call_timer_callbacks_now();
+ /* some commands need to know the GDB connection, make note of current
+ * GDB connection. */
+ current_gdb_connection = gdb_connection;
command_run_line(cmd_ctx, cmd);
+ current_gdb_connection = NULL;
target_call_timer_callbacks_now();
log_remove_callback(gdb_log_callback, connection);
free(cmd);
/* perform any target specific operations before the erase */
target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_FLASH_ERASE_START);
- result = flash_erase_address_range(gdb_service->target, addr, length );
+ result = flash_erase_address_range(gdb_service->target, addr, length);
target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_FLASH_ERASE_END);
/* perform erase */
int gdb_detach(connection_t *connection, target_t *target)
{
- switch (detach_mode )
+ switch (detach_mode)
{
case GDB_DETACH_RESUME:
- target_handle_event(target, TARGET_EVENT_OLD_pre_resume );
+ target_handle_event(target, TARGET_EVENT_OLD_pre_resume);
target_resume(target, 1, 0, 1, 0);
break;
/* terminate with zero */
packet[packet_size] = 0;
- if (LOG_LEVEL_IS(LOG_LVL_DEBUG ) ){
- if (packet[0] == 'X' ){
+ if (LOG_LEVEL_IS(LOG_LVL_DEBUG)) {
+ if (packet[0] == 'X') {
// binary packets spew junk into the debug log stream
char buf[ 50 ];
int x;
- for (x = 0 ; (x < 49) && (packet[x] != ':') ; x++ ){
+ for (x = 0 ; (x < 49) && (packet[x] != ':') ; x++) {
buf[x] = packet[x];
}
buf[x] = 0;
- LOG_DEBUG("received packet: '%s:<binary-data>'", buf );
+ LOG_DEBUG("received packet: '%s:<binary-data>'", buf);
} else {
- LOG_DEBUG("received packet: '%s'", packet );
+ LOG_DEBUG("received packet: '%s'", packet);
}
}
case 'c':
case 's':
{
- if (target->state != TARGET_HALTED)
+ int retval = ERROR_OK;
+
+ gdb_connection_t *gdb_con = connection->priv;
+ log_add_callback(gdb_log_callback, connection);
+
+ bool nostep = false;
+ if (target->state == TARGET_RUNNING)
+ {
+ LOG_WARNING("The target is already running. Halt target before stepi/continue.");
+ retval = target_halt(target);
+ if (retval == ERROR_OK)
+ retval = target_wait_state(target, TARGET_HALTED, 100);
+ } else if (target->state != TARGET_HALTED)
+ {
+ LOG_WARNING("The target is not in the halted nor running stated, stepi/continue ignored.");
+ nostep = true;
+ } else if ((packet[0] == 's') && gdb_con->sync)
{
- /* If the target isn't in the halted state, then we can't
+ /* Hmm..... when you issue a continue in GDB, then a "stepi" is
+ * sent by GDB first to OpenOCD, thus defeating the check to
+ * make only the single stepping have the sync feature...
+ */
+ nostep = true;
+ LOG_WARNING("stepi ignored. GDB will now fetch the register state from the target.");
+ }
+ gdb_con->sync = false;
+
+ if ((retval!=ERROR_OK) || nostep)
+ {
+ /* Either the target isn't in the halted state, then we can't
* step/continue. This might be early setup, etc.
+ *
+ * Or we want to allow GDB to pick up a fresh set of
+ * register values without modifying the target state.
+ *
*/
gdb_sig_halted(connection);
+
+ /* stop forwarding log packets! */
+ log_remove_callback(gdb_log_callback, connection);
} else
{
/* We're running/stepping, in which case we can
* forward log output until the target is halted
*/
- gdb_connection_t *gdb_con = connection->priv;
gdb_con->frontend_state = TARGET_RUNNING;
- log_add_callback(gdb_log_callback, connection);
target_call_event_callbacks(target, TARGET_EVENT_GDB_START);
int retval = gdb_step_continue_packet(connection, target, packet, packet_size);
if (retval != ERROR_OK)
/* handle extended restart packet */
breakpoint_clear_target(gdb_service->target);
watchpoint_clear_target(gdb_service->target);
- command_run_linef(connection->cmd_ctx, "ocd_gdb_restart %d", get_num_by_target(target));
+ command_run_linef(connection->cmd_ctx,
+ "ocd_gdb_restart %s",
+ target->cmd_name);
break;
default:
/* ignore unkown packets */
}
else
{
+ unsigned short port = gdb_port;
+
while (target)
{
gdb_service = malloc(sizeof(gdb_service_t));
gdb_service->target = target;
- add_service("gdb", CONNECTION_TCP, gdb_port + target->target_number, 1, gdb_new_connection, gdb_input, gdb_connection_closed, gdb_service);
+ add_service("gdb", CONNECTION_TCP,
+ port, 1,
+ gdb_new_connection, gdb_input,
+ gdb_connection_closed, gdb_service);
- LOG_DEBUG("gdb service for target %s at port %i",
+ LOG_DEBUG("gdb service for target %s at TCP port %i",
target_get_name(target),
- gdb_port + target->target_number);
+ port);
target = target->next;
+ port++;
}
}
return ERROR_OK;
}
+int handle_gdb_sync_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc != 0)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if (current_gdb_connection == NULL)
+ {
+ command_print(cmd_ctx,
+ "gdb_sync command can only be run from within gdb using \"monitor gdb_sync\"");
+ return ERROR_FAIL;
+ }
+
+ current_gdb_connection->sync = true;
+
+ return ERROR_OK;
+}
+
/* daemon configuration command gdb_port */
int handle_gdb_port_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
return ERROR_OK;
}
- /* only if the port wasn't overwritten by cmdline */
- if (gdb_port == 0)
- gdb_port = strtoul(args[0], NULL, 0);
+ gdb_port = strtoul(args[0], NULL, 0);
return ERROR_OK;
}
int gdb_register_commands(command_context_t *command_context)
{
+ register_command(command_context, NULL, "gdb_sync", handle_gdb_sync_command,
+ COMMAND_ANY, "next stepi will return immediately allowing GDB fetch register state without affecting target state");
register_command(command_context, NULL, "gdb_port", handle_gdb_port_command,
COMMAND_ANY, "daemon configuration command gdb_port");
register_command(command_context, NULL, "gdb_detach", handle_gdb_detach_command,
Code Review / openocd.git / blobdiff