/* parallel port cable description
*/
-typedef struct cable_s
-{
+struct cable {
char* name;
uint8_t TDO_MASK; /* status port bit containing current TDO value */
uint8_t TRST_MASK; /* data port bit for TRST */
uint8_t PORT_INIT; /* initialize data port with this value */
uint8_t PORT_EXIT; /* de-initialize data port with this value */
uint8_t LED_MASK; /* data port bit for LED */
-} cable_t;
+};
-static cable_t cables[] =
+static struct cable cables[] =
{
/* name tdo trst tms tck tdi srst o_inv i_inv init exit led */
{ "wiggler", 0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x01, 0x80, 0x80, 0x80, 0x00 },
/* configuration */
static char* parport_cable = NULL;
-static u16 parport_port;
-static int parport_exit = 0;
+static uint16_t parport_port;
+static bool parport_exit = 0;
+static uint32_t parport_toggling_time_ns = 1000;
+static int wait_states;
/* interface variables
*/
-static cable_t* cable;
+static struct cable* cable;
static uint8_t dataport_value = 0x0;
#if PARPORT_USE_PPDEV == 1
static unsigned long statusport;
#endif
-/* low level command set
- */
-static int parport_read(void);
-static void parport_write(int tck, int tms, int tdi);
-static void parport_reset(int trst, int srst);
-static void parport_led(int on);
-
-static int parport_speed(int speed);
-static int parport_register_commands(struct command_context_s *cmd_ctx);
-static int parport_init(void);
-static int parport_quit(void);
-
-/* interface commands */
-static int parport_handle_parport_port_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-static int parport_handle_parport_cable_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-static int parport_handle_write_on_exit_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-jtag_interface_t parport_interface =
-{
- .name = "parport",
-
- .execute_queue = bitbang_execute_queue,
-
- .speed = parport_speed,
- .register_commands = parport_register_commands,
- .init = parport_init,
- .quit = parport_quit,
-};
-
-static bitbang_interface_t parport_bitbang =
-{
- .read = parport_read,
- .write = parport_write,
- .reset = parport_reset,
- .blink = parport_led
-};
-
static int parport_read(void)
{
int data = 0;
static void parport_write(int tck, int tms, int tdi)
{
- int i = jtag_get_speed() + 1;
+ int i = wait_states + 1;
if (tck)
dataport_value |= cable->TCK_MASK;
static int parport_speed(int speed)
{
+ wait_states = speed;
return ERROR_OK;
}
-static int parport_register_commands(struct command_context_s *cmd_ctx)
+static int parport_khz(int khz, int* jtag_speed)
{
- register_command(cmd_ctx, NULL, "parport_port", parport_handle_parport_port_command,
- COMMAND_CONFIG, "either the address of the I/O port or the number of the \91/dev/parport\92 device");
- register_command(cmd_ctx, NULL, "parport_cable", parport_handle_parport_cable_command,
- COMMAND_CONFIG, "the layout of the parallel port cable used to connect to the target");
- register_command(cmd_ctx, NULL, "parport_write_on_exit", parport_handle_write_on_exit_command,
- COMMAND_CONFIG, "configure the parallel driver to write a known value to the parallel interface");
+ if (khz == 0) {
+ LOG_DEBUG("RCLK not supported");
+ return ERROR_FAIL;
+ }
+
+ *jtag_speed = 499999 / (khz * parport_toggling_time_ns);
+ return ERROR_OK;
+}
+
+static int parport_speed_div(int speed, int* khz)
+{
+ uint32_t denominator = (speed + 1) * parport_toggling_time_ns;
+ *khz = (499999 + denominator) / denominator;
return ERROR_OK;
}
OSVERSIONINFO version;
version.dwOSVersionInfoSize = sizeof version;
- if (!GetVersionEx( &version )) {
+ if (!GetVersionEx(&version)) {
errno = EINVAL;
return -1;
}
if (version.dwPlatformId != VER_PLATFORM_WIN32_NT)
return 0;
- h = CreateFile( "\\\\.\\giveio", GENERIC_READ, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL );
+ h = CreateFile("\\\\.\\giveio", GENERIC_READ, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
if (h == INVALID_HANDLE_VALUE) {
errno = ENODEV;
return -1;
}
- CloseHandle( h );
+ CloseHandle(h);
return 0;
}
#endif
+static struct bitbang_interface parport_bitbang = {
+ .read = &parport_read,
+ .write = &parport_write,
+ .reset = &parport_reset,
+ .blink = &parport_led,
+ };
+
static int parport_init(void)
{
- cable_t *cur_cable;
+ struct cable *cur_cable;
#if PARPORT_USE_PPDEV == 1
char buffer[256];
int i = 0;
if (device_handle < 0)
{
- LOG_ERROR("cannot open device. check it exists and that user read and write rights are set");
+ int err = errno;
+ LOG_ERROR("cannot open device. check it exists and that user read and write rights are set. errno=%d", err);
return ERROR_JTAG_INIT_FAILED;
}
LOG_DEBUG("...open");
#if !defined(__FreeBSD__) && !defined(__FreeBSD_kernel__)
- i=ioctl(device_handle, PPCLAIM);
- if (i<0)
+ i = ioctl(device_handle, PPCLAIM);
+ if (i < 0)
{
LOG_ERROR("cannot claim device");
return ERROR_JTAG_INIT_FAILED;
i = PARPORT_MODE_COMPAT;
i= ioctl(device_handle, PPSETMODE, & i);
- if (i<0)
+ if (i < 0)
{
LOG_ERROR(" cannot set compatible mode to device");
return ERROR_JTAG_INIT_FAILED;
i = IEEE1284_MODE_COMPAT;
i = ioctl(device_handle, PPNEGOT, & i);
- if (i<0)
+ if (i < 0)
{
LOG_ERROR("cannot set compatible 1284 mode to device");
return ERROR_JTAG_INIT_FAILED;
bitbang_interface = &parport_bitbang;
+ wait_states = jtag_get_speed();
+
return ERROR_OK;
}
return ERROR_OK;
}
-static int parport_handle_parport_port_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(parport_handle_parport_port_command)
{
- if (argc == 1)
+ if (CMD_ARGC == 1)
{
/* only if the port wasn't overwritten by cmdline */
if (parport_port == 0)
{
- int retval = parse_u16(args[0], &parport_port);
- if (ERROR_OK != retval)
- return retval;
+ COMMAND_PARSE_NUMBER(u16, CMD_ARGV[0], parport_port);
}
else
{
}
}
- command_print(cmd_ctx, "parport port = %u", parport_port);
+ command_print(CMD_CTX, "parport port = %u", parport_port);
return ERROR_OK;
}
-static int parport_handle_parport_cable_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(parport_handle_parport_cable_command)
{
- if (argc == 0)
+ if (CMD_ARGC == 0)
return ERROR_OK;
/* only if the cable name wasn't overwritten by cmdline */
if (parport_cable == 0)
{
- parport_cable = malloc(strlen(args[0]) + sizeof(char));
- strcpy(parport_cable, args[0]);
+ parport_cable = malloc(strlen(CMD_ARGV[0]) + sizeof(char));
+ strcpy(parport_cable, CMD_ARGV[0]);
}
return ERROR_OK;
}
-static int parport_handle_write_on_exit_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(parport_handle_write_on_exit_command)
{
- if (argc != 1)
+ if (CMD_ARGC != 1)
{
- command_print(cmd_ctx, "usage: parport_write_on_exit <on|off>");
+ command_print(CMD_CTX, "usage: parport_write_on_exit <on | off>");
return ERROR_OK;
}
- if (strcmp(args[0], "on") == 0)
- parport_exit = 1;
- else if (strcmp(args[0], "off") == 0)
- parport_exit = 0;
+ COMMAND_PARSE_ON_OFF(CMD_ARGV[0], parport_exit);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(parport_handle_parport_toggling_time_command)
+{
+ if (CMD_ARGC == 1) {
+ uint32_t ns;
+ int retval = parse_u32(CMD_ARGV[0], &ns);
+
+ if (ERROR_OK != retval)
+ return retval;
+
+ if (ns == 0) {
+ LOG_ERROR("0 ns is not a valid parport toggling time");
+ return ERROR_FAIL;
+ }
+
+ parport_toggling_time_ns = ns;
+ wait_states = jtag_get_speed();
+ }
+
+ command_print(CMD_CTX, "parport toggling time = %" PRIu32 " ns",
+ parport_toggling_time_ns);
return ERROR_OK;
}
+
+static const struct command_registration parport_command_handlers[] = {
+ {
+ .name = "parport_port",
+ .handler = &parport_handle_parport_port_command,
+ .mode = COMMAND_CONFIG,
+ .help = "either the address of the I/O port "
+ "or the number of the '/dev/parport' device",
+ .usage = "[<port|devname>]",
+ },
+ {
+ .name = "parport_cable",
+ .handler = &parport_handle_parport_cable_command,
+ .mode = COMMAND_CONFIG,
+ .help = "the layout of the parallel port cable "
+ "used to connect to the target",
+ .usage = "[<layout>]",
+ },
+ {
+ .name = "parport_write_on_exit",
+ .handler = &parport_handle_write_on_exit_command,
+ .mode = COMMAND_CONFIG,
+ .help = "configure the parallel driver to write "
+ "a known value to the parallel interface",
+ .usage = "[<on|off>]",
+ },
+ {
+ .name = "parport_toggling_time",
+ .handler = &parport_handle_parport_toggling_time_command,
+ .mode = COMMAND_CONFIG,
+ .help = "time <ns> it takes for the hardware to toggle TCK",
+ .usage = "[<ns>]",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+struct jtag_interface parport_interface = {
+ .name = "parport",
+
+ .commands = parport_command_handlers,
+
+ .init = &parport_init,
+ .quit = &parport_quit,
+
+ .khz = &parport_khz,
+ .speed_div = &parport_speed_div,
+ .speed = &parport_speed,
+
+ .execute_queue = &bitbang_execute_queue,
+ };