/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
+* Copyright (C) 2005 by Dominic Rath *
+* Dominic.Rath@gmx.de *
+* *
+* Copyright (C) 2007,2008 Øyvind Harboe *
+* oyvind.harboe@zylin.com *
+* *
+* This program is free software; you can redistribute it and/or modify *
+* it under the terms of the GNU General Public License as published by *
+* the Free Software Foundation; either version 2 of the License, or *
+* (at your option) any later version. *
+* *
+* This program is distributed in the hope that it will be useful, *
+* but WITHOUT ANY WARRANTY; without even the implied warranty of *
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+* GNU General Public License for more details. *
+* *
+* You should have received a copy of the GNU General Public License *
+* along with this program; if not, write to the *
+* Free Software Foundation, Inc., *
+* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+***************************************************************************/
#ifndef JTAG_H
#define JTAG_H
#include "types.h"
#include "binarybuffer.h"
+#include "log.h"
#include "command.h"
+
#if 0
#define _DEBUG_JTAG_IO_
#endif
-/* Tap States
- * TLR - Test-Logic-Reset, RTI - Run-Test/Idle,
- * SDS - Select-DR-Scan, CD - Capture-DR, SD - Shift-DR, E1D - Exit1-DR,
- * PD - Pause-DR, E2D - Exit2-DR, UD - Update-DR,
- * SIS - Select-IR-Scan, CI - Capture-IR, SI - Shift-IR, E1I - Exit1-IR,
- * PI - Pause-IR, E2I - Exit2-IR, UI - Update-IR
+#ifndef DEBUG_JTAG_IOZ
+#define DEBUG_JTAG_IOZ 64
+#endif
+
+
+/* 16 Tap States, from page 21 of ASSET InterTech, Inc.'s svf.pdf
*/
-enum tap_state
-{
- TAP_TLR = 0x0, TAP_RTI = 0x8,
- TAP_SDS = 0x1, TAP_CD = 0x2, TAP_SD = 0x3, TAP_E1D = 0x4,
- TAP_PD = 0x5, TAP_E2D = 0x6, TAP_UD = 0x7,
- TAP_SIS = 0x9, TAP_CI = 0xa, TAP_SI = 0xb, TAP_E1I = 0xc,
- TAP_PI = 0xd, TAP_E2I = 0xe, TAP_UI = 0xf
+enum tap_state {
+ TAP_RESET = 0, TAP_IDLE = 8,
+ TAP_DRSELECT = 1, TAP_DRCAPTURE = 2, TAP_DRSHIFT = 3, TAP_DREXIT1 = 4,
+ TAP_DRPAUSE = 5, TAP_DREXIT2 = 6, TAP_DRUPDATE = 7,
+ TAP_IRSELECT = 9, TAP_IRCAPTURE = 10, TAP_IRSHIFT = 11, TAP_IREXIT1 = 12,
+ TAP_IRPAUSE = 13, TAP_IREXIT2 = 14, TAP_IRUPDATE = 15
};
+typedef enum tap_state tap_state_t;
+
typedef struct tap_transition_s
{
- enum tap_state high;
- enum tap_state low;
+ tap_state_t high;
+ tap_state_t low;
} tap_transition_t;
-extern char* tap_state_strings[16];
-extern int tap_move_map[16]; /* map 16 TAP states to 6 stable states */
-extern u8 tap_move[6][6]; /* value scanned to TMS to move from one of six stable states to another */
-extern tap_transition_t tap_transitions[16]; /* describe the TAP state diagram */
+//extern tap_transition_t tap_transitions[16]; /* describe the TAP state diagram */
+
+
+/*-----<Cable Helper API>-------------------------------------------*/
+
+/* The "Cable Helper API" is what the cable drivers can use to help implement
+ * their "Cable API". So a Cable Helper API is a set of helper functions used by
+ * cable drivers, and this is different from a Cable API. A "Cable API" is what
+ * higher level code used to talk to a cable.
+ */
+
+
+/** implementation of wrapper function tap_set_state() */
+void tap_set_state_impl(tap_state_t new_state);
+
+/**
+ * Function tap_set_state
+ * sets the state of a "state follower" which tracks the state of the TAPs connected to the
+ * cable. The state follower is hopefully always in the same state as the actual
+ * TAPs in the jtag chain, and will be so if there are no bugs in the tracking logic within that
+ * cable driver. All the cable drivers call this function to indicate the state they think
+ * the TAPs attached to their cables are in. Because this function can also log transitions,
+ * it will be helpful to call this function with every transition that the TAPs being manipulated
+ * are expected to traverse, not just end points of a multi-step state path.
+ * @param new_state is the state we think the TAPs are currently in or are about to enter.
+ */
+#if defined(_DEBUG_JTAG_IO_)
+#define tap_set_state(new_state) \
+ do { \
+ LOG_DEBUG( "tap_set_state(%s)", tap_state_name(new_state) ); \
+ tap_set_state_impl(new_state); \
+ } while (0)
+#else
+static inline void tap_set_state(tap_state_t new_state)
+{
+ tap_set_state_impl(new_state);
+}
+
+#endif
+
+/**
+ * Function tap_get_state
+ * gets the state of the "state follower" which tracks the state of the TAPs connected to
+ * the cable.
+ * @see tap_set_state
+ * @return tap_state_t - The state the TAPs are in now.
+ */
+tap_state_t tap_get_state(void);
+
+/**
+ * Function tap_set_end_state
+ * sets the state of an "end state follower" which tracks the state that any cable driver
+ * thinks will be the end (resultant) state of the current TAP SIR or SDR operation. At completion
+ * of that TAP operation this value is copied into the state follower via tap_set_state().
+ * @param new_end_state is that state the TAPs should enter at completion of a pending TAP operation.
+ */
+void tap_set_end_state(tap_state_t new_end_state);
+
+/**
+ * Function tap_get_end_state
+ * @see tap_set_end_state
+ * @return tap_state_t - The state the TAPs should be in at completion of the current TAP operation.
+ */
+tap_state_t tap_get_end_state(void);
+
+/**
+ * Function tap_get_tms_path
+ * returns a 7 bit long "bit sequence" indicating what has to be done with TMS
+ * during a sequence of seven TAP clock cycles in order to get from
+ * state \a "from" to state \a "to".
+ * @param from is the starting state
+ * @param to is the resultant or final state
+ * @return int - a 7 bit sequence, with the first bit in the sequence at bit 0.
+ */
+int tap_get_tms_path(tap_state_t from, tap_state_t to);
+
+/**
+ * Function tap_move_ndx
+ * when given a stable state, returns an index from 0-5. The index corresponds to a
+ * sequence of stable states which are given in this order: <p>
+ * { TAP_RESET, TAP_IDLE, TAP_DRSHIFT, TAP_DRPAUSE, TAP_IRSHIFT, TAP_IRPAUSE }
+ * <p>
+ * This sequence corresponds to look up tables which are used in some of the
+ * cable drivers.
+ * @param astate is the stable state to find in the sequence. If a non stable
+ * state is passed, this may cause the program to output an error message
+ * and terminate.
+ * @return int - the array (or sequence) index as described above
+ */
+int tap_move_ndx(tap_state_t astate);
+
+/**
+ * Function tap_is_state_stable
+ * returns true if the \a astate is stable.
+ */
+bool tap_is_state_stable(tap_state_t astate);
+
+/**
+ * Function tap_state_transition
+ * takes a current TAP state and returns the next state according to the tms value.
+ * @param current_state is the state of a TAP currently.
+ * @param tms is either zero or non-zero, just like a real TMS line in a jtag interface.
+ * @return tap_state_t - the next state a TAP would enter.
+ */
+tap_state_t tap_state_transition(tap_state_t current_state, bool tms);
+
+/**
+ * Function tap_state_name
+ * Returns a string suitable for display representing the JTAG tap_state
+ */
+const char* tap_state_name(tap_state_t state);
+
+/*-----</Cable Helper API>------------------------------------------*/
-extern enum tap_state end_state; /* finish DR scans in dr_end_state */
-extern enum tap_state cur_state; /* current TAP state */
-#define TAP_MOVE(from, to) tap_move[tap_move_map[from]][tap_move_map[to]]
+extern tap_state_t cmd_queue_end_state; /* finish DR scans in dr_end_state */
+extern tap_state_t cmd_queue_cur_state; /* current TAP state */
+
+typedef void* error_handler_t; /* Later on we can delete error_handler_t, but keep it for now to make patches more readable */
+
+struct scan_field_s;
+typedef int (*in_handler_t)(u8* in_value, void* priv, struct scan_field_s* field);
typedef struct scan_field_s
{
- int device; /* ordinal device number this instruction refers to */
- int num_bits; /* number of bits this field specifies (up to 32) */
- u8 *out_value; /* value to be scanned into the device */
- u8 *out_mask; /* only masked bits care */
- u8 *in_value; /* pointer to a 32-bit memory location to take data scanned out */
- u8 *in_check_value; /* used to validate scan results */
- u8 *in_check_mask; /* check specified bits against check_value */
- int (*in_handler)(u8 *in_value, void *priv); /* process received buffer using this handler */
- void *in_handler_priv; /* additional information for the in_handler */
+ jtag_tap_t* tap; /* tap pointer this instruction refers to */
+ int num_bits; /* number of bits this field specifies (up to 32) */
+ u8* out_value; /* value to be scanned into the device */
+ u8* out_mask; /* only masked bits care */
+ u8* in_value; /* pointer to a 32-bit memory location to take data scanned out */
+ /* in_check_value/mask, in_handler_error_handler, in_handler_priv can be used by the in handler, otherwise they contain garbage */
+ u8* in_check_value; /* used to validate scan results */
+ u8* in_check_mask; /* check specified bits against check_value */
+ in_handler_t in_handler; /* process received buffer using this handler */
+ void* in_handler_priv; /* additional information for the in_handler */
} scan_field_t;
-enum scan_type
-{
+enum scan_type {
/* IN: from device to host, OUT: from host to device */
SCAN_IN = 1, SCAN_OUT = 2, SCAN_IO = 3
};
typedef struct scan_command_s
{
- int ir_scan; /* instruction/not data scan */
- int num_fields; /* number of fields in *fields array */
- scan_field_t *fields; /* pointer to an array of data scan fields */
- enum tap_state end_state; /* TAP state in which JTAG commands should finish */
+ int ir_scan; /* instruction/not data scan */
+ int num_fields; /* number of fields in *fields array */
+ scan_field_t* fields; /* pointer to an array of data scan fields */
+ tap_state_t end_state; /* TAP state in which JTAG commands should finish */
} scan_command_t;
typedef struct statemove_command_s
{
- enum tap_state end_state; /* TAP state in which JTAG commands should finish */
+ tap_state_t end_state; /* TAP state in which JTAG commands should finish */
} statemove_command_t;
typedef struct pathmove_command_s
{
- int num_states; /* number of states in *path */
- enum tap_state *path; /* states that have to be passed */
+ int num_states; /* number of states in *path */
+ tap_state_t* path; /* states that have to be passed */
} pathmove_command_t;
typedef struct runtest_command_s
{
- int num_cycles; /* number of cycles that should be spent in Run-Test/Idle */
- enum tap_state end_state; /* TAP state in which JTAG commands should finish */
+ int num_cycles; /* number of cycles that should be spent in Run-Test/Idle */
+ tap_state_t end_state; /* TAP state in which JTAG commands should finish */
} runtest_command_t;
+
+typedef struct stableclocks_command_s
+{
+ int num_cycles; /* number of clock cycles that should be sent */
+} stableclocks_command_t;
+
+
typedef struct reset_command_s
{
- int trst; /* trst/srst 0: deassert, 1: assert, -1: don't change */
+ int trst; /* trst/srst 0: deassert, 1: assert, -1: don't change */
int srst;
} reset_command_t;
typedef struct end_state_command_s
{
- enum tap_state end_state; /* TAP state in which JTAG commands should finish */
+ tap_state_t end_state; /* TAP state in which JTAG commands should finish */
} end_state_command_t;
typedef struct sleep_command_s
{
- u32 us; /* number of microseconds to sleep */
+ u32 us; /* number of microseconds to sleep */
} sleep_command_t;
typedef union jtag_command_container_u
{
- scan_command_t *scan;
- statemove_command_t *statemove;
- pathmove_command_t *pathmove;
- runtest_command_t *runtest;
- reset_command_t *reset;
- end_state_command_t *end_state;
- sleep_command_t *sleep;
+ scan_command_t* scan;
+ statemove_command_t* statemove;
+ pathmove_command_t* pathmove;
+ runtest_command_t* runtest;
+ stableclocks_command_t* stableclocks;
+ reset_command_t* reset;
+ end_state_command_t* end_state;
+ sleep_command_t* sleep;
} jtag_command_container_t;
-enum jtag_command_type
-{
- JTAG_SCAN = 1,
- JTAG_STATEMOVE = 2, JTAG_RUNTEST = 3,
- JTAG_RESET = 4, JTAG_END_STATE = 5,
- JTAG_PATHMOVE = 6, JTAG_SLEEP = 7
+enum jtag_command_type {
+ JTAG_SCAN = 1,
+ JTAG_STATEMOVE = 2,
+ JTAG_RUNTEST = 3,
+ JTAG_RESET = 4,
+ JTAG_END_STATE = 5,
+ JTAG_PATHMOVE = 6,
+ JTAG_SLEEP = 7,
+ JTAG_STABLECLOCKS = 8
};
typedef struct jtag_command_s
{
jtag_command_container_t cmd;
- enum jtag_command_type type;
- struct jtag_command_s *next;
+ enum jtag_command_type type;
+ struct jtag_command_s* next;
} jtag_command_t;
-extern jtag_command_t *jtag_command_queue;
+extern jtag_command_t* jtag_command_queue;
-typedef struct jtag_device_s
+/* forward declaration */
+typedef struct jtag_tap_event_action_s jtag_tap_event_action_t;
+
+/* this is really: typedef jtag_tap_t */
+/* But - the typedef is done in "types.h" */
+/* due to "forward decloration reasons" */
+struct jtag_tap_s
{
- int ir_length; /* size of instruction register */
- u8 *expected; /* Capture-IR expected value */
- u8 *expected_mask; /* Capture-IR expected mask */
- u32 idcode; /* device identification code */
- u8 *cur_instr; /* current instruction */
- int bypass; /* bypass register selected */
- struct jtag_device_s *next;
-} jtag_device_t;
-
-extern jtag_device_t *jtag_devices;
-extern int jtag_num_devices;
-extern int jtag_ir_scan_size;
-
-enum reset_line_mode
+ const char* chip;
+ const char* tapname;
+ const char* dotted_name;
+ int abs_chain_position;
+ int enabled;
+ int ir_length; /* size of instruction register */
+ u32 ir_capture_value;
+ u8* expected; /* Capture-IR expected value */
+ u32 ir_capture_mask;
+ u8* expected_mask; /* Capture-IR expected mask */
+ u32 idcode; /* device identification code */
+ u32* expected_ids; /* Array of expected identification codes */
+ u8 expected_ids_cnt; /* Number of expected identification codes */
+ u8* cur_instr; /* current instruction */
+ int bypass; /* bypass register selected */
+
+ jtag_tap_event_action_t* event_action;
+
+ jtag_tap_t* next_tap;
+};
+extern jtag_tap_t* jtag_AllTaps(void);
+extern jtag_tap_t* jtag_TapByPosition(int n);
+extern jtag_tap_t* jtag_TapByPosition(int n);
+extern jtag_tap_t* jtag_TapByString(const char* dotted_name);
+extern jtag_tap_t* jtag_TapByJimObj(Jim_Interp* interp, Jim_Obj* obj);
+extern jtag_tap_t* jtag_TapByAbsPosition(int abs_position);
+extern int jtag_NumEnabledTaps(void);
+extern int jtag_NumTotalTaps(void);
+
+static __inline__ jtag_tap_t* jtag_NextEnabledTap(jtag_tap_t* p)
{
+ if (p == NULL)
+ {
+ /* start at the head of list */
+ p = jtag_AllTaps();
+ }
+ else
+ {
+ /* start *after* this one */
+ p = p->next_tap;
+ }
+ while (p)
+ {
+ if (p->enabled)
+ {
+ break;
+ }
+ else
+ {
+ p = p->next_tap;
+ }
+ }
+
+ return p;
+}
+
+
+enum reset_line_mode {
LINE_OPEN_DRAIN = 0x0,
- LINE_PUSH_PULL = 0x1,
+ LINE_PUSH_PULL = 0x1,
};
typedef struct jtag_interface_s
{
char* name;
-
+
/* queued command execution
*/
int (*execute_queue)(void);
-
- /* optional command support
- */
- int support_pathmove;
-
+
/* interface initalization
*/
int (*speed)(int speed);
- int (*register_commands)(struct command_context_s *cmd_ctx);
+ int (*register_commands)(struct command_context_s* cmd_ctx);
int (*init)(void);
int (*quit)(void);
-
+
+ /* returns JTAG maxium speed for KHz. 0=RTCK. The function returns
+ * a failure if it can't support the KHz/RTCK.
+ *
+ * WARNING!!!! if RTCK is *slow* then think carefully about
+ * whether you actually want to support this in the driver.
+ * Many target scripts are written to handle the absence of RTCK
+ * and use a fallback kHz TCK.
+ */
+ int (*khz)(int khz, int* jtag_speed);
+
+ /* returns the KHz for the provided JTAG speed. 0=RTCK. The function returns
+ * a failure if it can't support the KHz/RTCK. */
+ int (*speed_div)(int speed, int* khz);
+
+ /* Read and clear the power dropout flag. Note that a power dropout
+ * can be transitionary, easily much less than a ms.
+ *
+ * So to find out if the power is *currently* on, you must invoke
+ * this method twice. Once to clear the power dropout flag and a
+ * second time to read the current state.
+ *
+ * Currently the default implementation is never to detect power dropout.
+ */
+ int (*power_dropout)(int* power_dropout);
+
+ /* Read and clear the srst asserted detection flag.
+ *
+ * NB!!!! like power_dropout this does *not* read the current
+ * state. srst assertion is transitionary and *can* be much
+ * less than 1ms.
+ */
+ int (*srst_asserted)(int* srst_asserted);
} jtag_interface_t;
-enum jtag_event
+enum jtag_event {
+ JTAG_TRST_ASSERTED
+};
+
+extern char* jtag_event_strings[];
+
+enum jtag_tap_event {
+ JTAG_TAP_EVENT_ENABLE,
+ JTAG_TAP_EVENT_DISABLE
+};
+
+extern const Jim_Nvp nvp_jtag_tap_event[];
+
+struct jtag_tap_event_action_s
{
- JTAG_SRST_ASSERTED,
- JTAG_TRST_ASSERTED,
- JTAG_SRST_RELEASED,
- JTAG_TRST_RELEASED,
+ enum jtag_tap_event event;
+ Jim_Obj* body;
+ jtag_tap_event_action_t* next;
};
extern int jtag_trst;
typedef struct jtag_event_callback_s
{
- int (*callback)(enum jtag_event event, void *priv);
- void *priv;
- struct jtag_event_callback_s *next;
+ int (*callback)(enum jtag_event event, void* priv);
+ void* priv;
+ struct jtag_event_callback_s* next;
} jtag_event_callback_t;
-extern jtag_event_callback_t *jtag_event_callbacks;
+extern jtag_event_callback_t* jtag_event_callbacks;
-extern jtag_interface_t *jtag; /* global pointer to configured JTAG interface */
-extern enum tap_state end_state;
-extern enum tap_state cur_state;
+extern jtag_interface_t* jtag; /* global pointer to configured JTAG interface */
-extern char* jtag_interface;
extern int jtag_speed;
+extern int jtag_speed_post_reset;
-enum reset_types
-{
- RESET_NONE = 0x0,
- RESET_HAS_TRST = 0x1,
- RESET_HAS_SRST = 0x2,
- RESET_TRST_AND_SRST = 0x3,
+enum reset_types {
+ RESET_NONE = 0x0,
+ RESET_HAS_TRST = 0x1,
+ RESET_HAS_SRST = 0x2,
+ RESET_TRST_AND_SRST = 0x3,
RESET_SRST_PULLS_TRST = 0x4,
RESET_TRST_PULLS_SRST = 0x8,
RESET_TRST_OPEN_DRAIN = 0x10,
- RESET_SRST_PUSH_PULL = 0x20,
+ RESET_SRST_PUSH_PULL = 0x20,
};
extern enum reset_types jtag_reset_config;
-/* JTAG subsystem */
-extern int jtag_init(struct command_context_s *cmd_ctx);
-extern int jtag_register_commands(struct command_context_s *cmd_ctx);
-
-/* JTAG interface */
-extern int jtag_add_ir_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern int jtag_add_dr_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern int jtag_add_plain_ir_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern int jtag_add_plain_dr_scan(int num_fields, scan_field_t *fields, enum tap_state endstate);
-extern int jtag_add_statemove(enum tap_state endstate);
-extern int jtag_add_pathmove(int num_states, enum tap_state *path);
-extern int jtag_add_runtest(int num_cycles, enum tap_state endstate);
-extern int jtag_add_reset(int trst, int srst);
-extern int jtag_add_end_state(enum tap_state endstate);
-extern int jtag_add_sleep(u32 us);
-extern int jtag_execute_queue(void);
-extern int jtag_cancel_queue(void);
+/* initialize interface upon startup. A successful no-op
+ * upon subsequent invocations
+ */
+extern int jtag_interface_init(struct command_context_s* cmd_ctx);
+
+/* initialize JTAG chain using only a RESET reset. If init fails,
+ * try reset + init.
+ */
+extern int jtag_init(struct command_context_s* cmd_ctx);
+
+/* reset, then initialize JTAG chain */
+extern int jtag_init_reset(struct command_context_s* cmd_ctx);
+extern int jtag_register_commands(struct command_context_s* cmd_ctx);
+
+/* JTAG interface, can be implemented with a software or hardware fifo
+ *
+ * TAP_DRSHIFT and TAP_IRSHIFT are illegal end states. TAP_DRSHIFT/IRSHIFT as end states
+ * can be emulated by using a larger scan.
+ *
+ * Code that is relatively insensitive to the path(as long
+ * as it is JTAG compliant) taken through state machine can use
+ * endstate for jtag_add_xxx_scan(). Otherwise the pause state must be
+ * specified as end state and a subsequent jtag_add_pathmove() must
+ * be issued.
+ *
+ */
+extern void jtag_add_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern int interface_jtag_add_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern void jtag_add_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern int interface_jtag_add_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern void jtag_add_plain_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern int interface_jtag_add_plain_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern void jtag_add_plain_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+extern int interface_jtag_add_plain_dr_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
+
+/* run a TAP_RESET reset. End state is TAP_RESET, regardless
+ * of start state.
+ */
+extern void jtag_add_tlr(void);
+extern int interface_jtag_add_tlr(void);
+
+/* Do not use jtag_add_pathmove() unless you need to, but do use it
+ * if you have to.
+ *
+ * DANGER! If the target is dependent upon a particular sequence
+ * of transitions for things to work correctly(e.g. as a workaround
+ * for an errata that contradicts the JTAG standard), then pathmove
+ * must be used, even if some jtag interfaces happen to use the
+ * desired path. Worse, the jtag interface used for testing a
+ * particular implementation, could happen to use the "desired"
+ * path when transitioning to/from end
+ * state.
+ *
+ * A list of unambigious single clock state transitions, not
+ * all drivers can support this, but it is required for e.g.
+ * XScale and Xilinx support
+ *
+ * Note! TAP_RESET must not be used in the path!
+ *
+ * Note that the first on the list must be reachable
+ * via a single transition from the current state.
+ *
+ * All drivers are required to implement jtag_add_pathmove().
+ * However, if the pathmove sequence can not be precisely
+ * executed, an interface_jtag_add_pathmove() or jtag_execute_queue()
+ * must return an error. It is legal, but not recommended, that
+ * a driver returns an error in all cases for a pathmove if it
+ * can only implement a few transitions and therefore
+ * a partial implementation of pathmove would have little practical
+ * application.
+ */
+extern void jtag_add_pathmove(int num_states, tap_state_t* path);
+extern int interface_jtag_add_pathmove(int num_states, tap_state_t* path);
+
+/* go to TAP_IDLE, if we're not already there and cycle
+ * precisely num_cycles in the TAP_IDLE after which move
+ * to the end state, if it is != TAP_IDLE
+ *
+ * nb! num_cycles can be 0, in which case the fn will navigate
+ * to endstate via TAP_IDLE
+ */
+extern void jtag_add_runtest(int num_cycles, tap_state_t endstate);
+extern int interface_jtag_add_runtest(int num_cycles, tap_state_t endstate);
+
+/* A reset of the TAP state machine can be requested.
+ *
+ * Whether tms or trst reset is used depends on the capabilities of
+ * the target and jtag interface(reset_config command configures this).
+ *
+ * srst can driver a reset of the TAP state machine and vice
+ * versa
+ *
+ * Application code may need to examine value of jtag_reset_config
+ * to determine the proper codepath
+ *
+ * DANGER! Even though srst drives trst, trst might not be connected to
+ * the interface, and it might actually be *harmful* to assert trst in this case.
+ *
+ * This is why combinations such as "reset_config srst_only srst_pulls_trst"
+ * are supported.
+ *
+ * only req_tlr_or_trst and srst can have a transition for a
+ * call as the effects of transitioning both at the "same time"
+ * are undefined, but when srst_pulls_trst or vice versa,
+ * then trst & srst *must* be asserted together.
+ */
+extern void jtag_add_reset(int req_tlr_or_trst, int srst);
+
+/* this drives the actual srst and trst pins. srst will always be 0
+ * if jtag_reset_config & RESET_SRST_PULLS_TRST != 0 and ditto for
+ * trst.
+ *
+ * the higher level jtag_add_reset will invoke jtag_add_tlr() if
+ * approperiate
+ */
+extern int interface_jtag_add_reset(int trst, int srst);
+extern void jtag_add_end_state(tap_state_t endstate);
+extern int interface_jtag_add_end_state(tap_state_t endstate);
+extern void jtag_add_sleep(u32 us);
+extern int interface_jtag_add_sleep(u32 us);
+
+
+/**
+ * Function jtag_add_stable_clocks
+ * first checks that the state in which the clocks are to be issued is
+ * stable, then queues up clock_count clocks for transmission.
+ */
+void jtag_add_clocks(int num_cycles);
+int interface_jtag_add_clocks(int num_cycles);
+
+
+/*
+ * For software FIFO implementations, the queued commands can be executed
+ * during this call or earlier. A sw queue might decide to push out
+ * some of the jtag_add_xxx() operations once the queue is "big enough".
+ *
+ * This fn will return an error code if any of the prior jtag_add_xxx()
+ * calls caused a failure, e.g. check failure. Note that it does not
+ * matter if the operation was executed *before* jtag_execute_queue(),
+ * jtag_execute_queue() will still return an error code.
+ *
+ * All jtag_add_xxx() calls that have in_handler!=NULL will have been
+ * executed when this fn returns, but if what has been queued only
+ * clocks data out, without reading anything back, then JTAG could
+ * be running *after* jtag_execute_queue() returns. The API does
+ * not define a way to flush a hw FIFO that runs *after*
+ * jtag_execute_queue() returns.
+ *
+ * jtag_add_xxx() commands can either be executed immediately or
+ * at some time between the jtag_add_xxx() fn call and jtag_execute_queue().
+ */
+extern int jtag_execute_queue(void);
+
+/* can be implemented by hw+sw */
+extern int interface_jtag_execute_queue(void);
+extern int jtag_power_dropout(int* dropout);
+extern int jtag_srst_asserted(int* srst_asserted);
/* JTAG support functions */
-extern enum scan_type jtag_scan_type(scan_command_t *cmd);
-extern int jtag_scan_size(scan_command_t *cmd);
-extern int jtag_read_buffer(u8 *buffer, scan_command_t *cmd);
-extern int jtag_build_buffer(scan_command_t *cmd, u8 **buffer);
-extern jtag_device_t* jtag_get_device(int num);
-extern void jtag_sleep(u32 us);
-extern int jtag_call_event_callbacks(enum jtag_event event);
-extern int jtag_register_event_callback(int (*callback)(enum jtag_event event, void *priv), void *priv);
+extern void jtag_set_check_value(scan_field_t* field, u8* value, u8* mask, error_handler_t* in_error_handler);
+extern enum scan_type jtag_scan_type(scan_command_t* cmd);
+extern int jtag_scan_size(scan_command_t* cmd);
+extern int jtag_read_buffer(u8* buffer, scan_command_t* cmd);
+extern int jtag_build_buffer(scan_command_t* cmd, u8** buffer);
+
+extern void jtag_sleep(u32 us);
+extern int jtag_call_event_callbacks(enum jtag_event event);
+extern int jtag_register_event_callback(int (* callback)(enum jtag_event event, void* priv), void* priv);
+
+extern int jtag_verify_capture_ir;
+
+void jtag_tap_handle_event(jtag_tap_t* tap, enum jtag_tap_event e);
/* error codes
* JTAG subsystem uses codes between -100 and -199 */
-#define ERROR_JTAG_INIT_FAILED (-100)
-#define ERROR_JTAG_INVALID_INTERFACE (-101)
-#define ERROR_JTAG_NOT_IMPLEMENTED (-102)
-#define ERROR_JTAG_TRST_ASSERTED (-103)
-#define ERROR_JTAG_QUEUE_FAILED (-104)
-#define ERROR_JTAG_RESET_WOULD_ASSERT_TRST (-105)
-#define ERROR_JTAG_RESET_CANT_SRST (-106)
-#define ERROR_JTAG_DEVICE_ERROR (-107)
+#define ERROR_JTAG_INIT_FAILED (-100)
+#define ERROR_JTAG_INVALID_INTERFACE (-101)
+#define ERROR_JTAG_NOT_IMPLEMENTED (-102)
+#define ERROR_JTAG_TRST_ASSERTED (-103)
+#define ERROR_JTAG_QUEUE_FAILED (-104)
+#define ERROR_JTAG_NOT_STABLE_STATE (-105)
+#define ERROR_JTAG_DEVICE_ERROR (-107)
+
+
+/* this allows JTAG devices to implement the entire jtag_xxx() layer in hw/sw */
+#ifdef HAVE_JTAG_MINIDRIVER_H
+/* Here a #define MINIDRIVER() and an inline version of hw fifo interface_jtag_add_dr_out can be defined */
+#include "jtag_minidriver.h"
+#define MINIDRIVER(a) notused ## a
+#else
+#define MINIDRIVER(a) a
+
+/* jtag_add_dr_out() is a faster version of jtag_add_dr_scan()
+ *
+ * Current or end_state can not be TAP_RESET. end_state can be -1
+ *
+ * num_bits[i] is the number of bits to clock out from value[i] LSB first.
+ *
+ * If the device is in bypass, then that is an error condition in
+ * the caller code that is not detected by this fn, whereas jtag_add_dr_scan()
+ * does detect it. Similarly if the device is not in bypass, data must
+ * be passed to it.
+ *
+ * If anything fails, then jtag_error will be set and jtag_execute() will
+ * return an error. There is no way to determine if there was a failure
+ * during this function call.
+ *
+ * Note that this jtag_add_dr_out can be defined as an inline function.
+ */
+extern void interface_jtag_add_dr_out(jtag_tap_t* tap, int num_fields, const int* num_bits, const u32* value,
+ tap_state_t end_state);
+
+#endif
+
+static __inline__ void jtag_add_dr_out(jtag_tap_t* tap, int num_fields, const int* num_bits, const u32* value,
+ tap_state_t end_state)
+{
+ if (end_state != -1)
+ cmd_queue_end_state = end_state;
+ cmd_queue_cur_state = cmd_queue_end_state;
+ interface_jtag_add_dr_out(tap, num_fields, num_bits, value, cmd_queue_end_state);
+}
+
+
#endif /* JTAG_H */