* oyvind.harboe@zylin.com *
* *
* Copyright (C) 2009 SoftPLC Corporation *
- * http://softplc.com *
+ * http://softplc.com *
* dick@softplc.com *
* *
* This program is free software; you can redistribute it and/or modify *
#endif
#include "jtag.h"
+#include "minidriver.h"
+#include "interface.h"
#ifdef HAVE_STRINGS_H
#include <strings.h>
#endif
-#include <assert.h>
-int jtag_flush_queue_count; /* count # of flushes for profiling / debugging purposes */
+/// The number of JTAG queue flushes (for profiling and debugging purposes).
+static int jtag_flush_queue_count;
+
+static void jtag_add_scan_check(void (*jtag_add_scan)(int in_num_fields, const scan_field_t *in_fields, tap_state_t state),
+ int in_num_fields, scan_field_t *in_fields, tap_state_t state);
/* note that this is not marked as static as it must be available from outside jtag.c for those
that implement the jtag_xxx() minidriver layer
*/
int jtag_error=ERROR_OK;
-typedef struct cmd_queue_page_s
-{
- void *address;
- size_t used;
- struct cmd_queue_page_s *next;
-} cmd_queue_page_t;
-
-#define CMD_QUEUE_PAGE_SIZE (1024 * 1024)
-static cmd_queue_page_t *cmd_queue_pages = NULL;
-
char* jtag_event_strings[] =
{
"JTAG controller reset (RESET or TRST)"
int jtag_trst = 0;
int jtag_srst = 0;
-#ifndef HAVE_JTAG_MINIDRIVER_H
-struct jtag_callback_entry
-{
- struct jtag_callback_entry *next;
-
- jtag_callback_t callback;
- u8 *in;
- jtag_callback_data_t data1;
- jtag_callback_data_t data2;
-
-};
-
-
-static struct jtag_callback_entry *jtag_callback_queue_head = NULL;
-static struct jtag_callback_entry *jtag_callback_queue_tail = NULL;
-#endif
-
-
-jtag_command_t *jtag_command_queue = NULL;
-jtag_command_t **last_comand_pointer = &jtag_command_queue;
-static jtag_tap_t *jtag_all_taps = NULL;
+/**
+ * List all TAPs that have been created.
+ */
+static jtag_tap_t *__jtag_all_taps = NULL;
+/**
+ * The number of TAPs in the __jtag_all_taps list, used to track the
+ * assigned chain position to new TAPs
+ */
+static int jtag_num_taps = 0;
enum reset_types jtag_reset_config = RESET_NONE;
tap_state_t cmd_queue_end_state = TAP_RESET;
tap_state_t cmd_queue_cur_state = TAP_RESET;
int jtag_verify_capture_ir = 1;
+int jtag_verify = 1;
/* how long the OpenOCD should wait before attempting JTAG communication after reset lines deasserted (in ms) */
static int jtag_nsrst_delay = 0; /* default to no nSRST delay */
/* speed in kHz*/
static int speed_khz = 0;
/* flag if the kHz speed was defined */
-static int hasKHz = 0;
+static bool hasKHz = false;
/* jtag interfaces (parport, FTDI-USB, TI-USB, ...)
*/
NULL,
};
-jtag_interface_t *jtag = NULL;
+struct jtag_interface_s *jtag = NULL;
/* configuration */
static jtag_interface_t *jtag_interface = NULL;
int jtag_speed = 0;
-/* forward declarations */
-//void jtag_add_pathmove(int num_states, tap_state_t *path);
-//void jtag_add_runtest(int num_cycles, tap_state_t endstate);
-//void jtag_add_end_state(tap_state_t endstate);
-//void jtag_add_sleep(u32 us);
-//int jtag_execute_queue(void);
-static tap_state_t tap_state_by_name(const char *name);
-
/* jtag commands */
static int handle_interface_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
static int handle_jtag_speed_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
static int Jim_Command_flush_count(Jim_Interp *interp, int argc, Jim_Obj *const *args);
static int handle_verify_ircapture_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+static int handle_verify_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+static int handle_tms_sequence_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-jtag_tap_t *jtag_AllTaps(void)
+jtag_tap_t *jtag_all_taps(void)
{
- return jtag_all_taps;
+ return __jtag_all_taps;
};
-int jtag_NumTotalTaps(void)
+int jtag_tap_count(void)
{
- jtag_tap_t *t;
- int n;
-
- n = 0;
- t = jtag_AllTaps();
- while(t){
- n++;
- t = t->next_tap;
- }
- return n;
+ return jtag_num_taps;
}
int jtag_NumEnabledTaps(void)
int n;
n = 0;
- t = jtag_AllTaps();
+ t = jtag_all_taps();
while(t){
if( t->enabled ){
n++;
return n;
}
-jtag_tap_t *jtag_TapByString( const char *s )
+/// Append a new TAP to the chain of all taps.
+static void jtag_tap_add(struct jtag_tap_s *t)
+{
+ t->abs_chain_position = jtag_num_taps++;
+
+ jtag_tap_t **tap = &__jtag_all_taps;
+ while(*tap != NULL)
+ tap = &(*tap)->next_tap;
+ *tap = t;
+}
+
+jtag_tap_t *jtag_tap_by_string( const char *s )
{
jtag_tap_t *t;
char *cp;
- t = jtag_AllTaps();
+ t = jtag_all_taps();
/* try name first */
while(t){
if( 0 == strcmp( t->dotted_name, s ) ){
n = strtol( s, &cp, 0 );
if( (s != cp) && (*cp == 0) ){
/* Then it is... */
- t = jtag_TapByAbsPosition(n);
+ t = jtag_tap_by_abs_position(n);
}
}
return t;
}
-jtag_tap_t * jtag_TapByJimObj( Jim_Interp *interp, Jim_Obj *o )
+jtag_tap_t * jtag_tap_by_jim_obj( Jim_Interp *interp, Jim_Obj *o )
{
jtag_tap_t *t;
const char *cp;
cp = "(unknown)";
t = NULL;
} else {
- t = jtag_TapByString( cp );
+ t = jtag_tap_by_string( cp );
}
if( t == NULL ){
Jim_SetResult_sprintf(interp,"Tap: %s is unknown", cp );
}
/* returns a pointer to the n-th device in the scan chain */
-jtag_tap_t * jtag_TapByAbsPosition( int n )
+jtag_tap_t * jtag_tap_by_abs_position( int n )
{
int orig_n;
jtag_tap_t *t;
orig_n = n;
- t = jtag_AllTaps();
+ t = jtag_all_taps();
while( t && (n > 0)) {
n--;
return t;
}
+const char *jtag_tap_name(const jtag_tap_t *tap)
+{
+ return (tap == NULL) ? "(unknown)" : tap->dotted_name;
+}
+
+
int jtag_register_event_callback(int (*callback)(enum jtag_event event, void *priv), void *priv)
{
jtag_event_callback_t **callbacks_p = &jtag_event_callbacks;
return ERROR_OK;
}
-/* returns a pointer to the pointer of the last command in queue
- * this may be a pointer to the root pointer (jtag_command_queue)
- * or to the next member of the last but one command
- */
-jtag_command_t** jtag_get_last_command_p(void)
+static void jtag_checks(void)
{
-/* jtag_command_t *cmd = jtag_command_queue;
-
- if (cmd)
- while (cmd->next)
- cmd = cmd->next;
- else
- return &jtag_command_queue;
-
- return &cmd->next;*/
-
- return last_comand_pointer;
-}
-
-void* cmd_queue_alloc(size_t size)
-{
- cmd_queue_page_t **p_page = &cmd_queue_pages;
- int offset;
- u8 *t;
-
- /*
- * WARNING:
- * We align/round the *SIZE* per below
- * so that all pointers returned by
- * this function are reasonably well
- * aligned.
- *
- * If we did not, then an "odd-length" request would cause the
- * *next* allocation to be at an *odd* address, and because
- * this function has the same type of api as malloc() - we
- * must also return pointers that have the same type of
- * alignment.
- *
- * What I do not/have is a reasonable portable means
- * to align by...
- *
- * The solution here, is based on these suggestions.
- * http://gcc.gnu.org/ml/gcc-help/2008-12/msg00041.html
- *
- */
- union worse_case_align {
- int i;
- long l;
- float f;
- void *v;
- };
-#define ALIGN_SIZE (sizeof(union worse_case_align))
-
- /* The alignment process. */
- size = (size + ALIGN_SIZE -1) & (~(ALIGN_SIZE-1));
- /* Done... */
-
- if (*p_page)
- {
- while ((*p_page)->next)
- p_page = &((*p_page)->next);
- if (CMD_QUEUE_PAGE_SIZE - (*p_page)->used < size)
- p_page = &((*p_page)->next);
- }
-
- if (!*p_page)
- {
- *p_page = malloc(sizeof(cmd_queue_page_t));
- (*p_page)->used = 0;
- (*p_page)->address = malloc(CMD_QUEUE_PAGE_SIZE);
- (*p_page)->next = NULL;
- }
-
- offset = (*p_page)->used;
- (*p_page)->used += size;
-
- t=(u8 *)((*p_page)->address);
- return t + offset;
+ assert(jtag_trst == 0);
}
-void cmd_queue_free(void)
+static void jtag_prelude(tap_state_t state)
{
- cmd_queue_page_t *page = cmd_queue_pages;
-
- while (page)
- {
- cmd_queue_page_t *last = page;
- free(page->address);
- page = page->next;
- free(last);
- }
+ jtag_checks();
- cmd_queue_pages = NULL;
-}
-
-static void jtag_prelude1(void)
-{
- if (jtag_trst == 1)
- {
- LOG_WARNING("JTAG command queued, while TRST is low (TAP in reset)");
- jtag_error=ERROR_JTAG_TRST_ASSERTED;
- return;
- }
+ assert(state!=TAP_INVALID);
- if (cmd_queue_end_state == TAP_RESET)
- jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
+ cmd_queue_cur_state = state;
}
-static void jtag_prelude(tap_state_t state)
+void jtag_alloc_in_value32(scan_field_t *field)
{
- jtag_prelude1();
-
- if (state != TAP_INVALID)
- jtag_add_end_state(state);
-
- cmd_queue_cur_state = cmd_queue_end_state;
+ interface_jtag_alloc_in_value32(field);
}
-void jtag_add_ir_scan_noverify(int num_fields, scan_field_t *fields, tap_state_t state)
+void jtag_add_ir_scan_noverify(int in_num_fields, const scan_field_t *in_fields, tap_state_t state)
{
int retval;
jtag_prelude(state);
- retval=interface_jtag_add_ir_scan(num_fields, fields, cmd_queue_end_state);
+ retval=interface_jtag_add_ir_scan(in_num_fields, in_fields, state);
if (retval!=ERROR_OK)
jtag_error=retval;
}
-void jtag_add_ir_scan(int num_fields, scan_field_t *fields, tap_state_t state)
+/**
+ * Generate an IR SCAN with a list of scan fields with one entry for each enabled TAP.
+ *
+ * If the input field list contains an instruction value for a TAP then that is used
+ * otherwise the TAP is set to bypass.
+ *
+ * TAPs for which no fields are passed are marked as bypassed for subsequent DR SCANs.
+ *
+ */
+void jtag_add_ir_scan(int in_num_fields, scan_field_t *in_fields, tap_state_t state)
{
- /* 8 x 32 bit id's is enough for all invoations */
- u32 id[8];
- int modified[8];
-
- /* if we are to run a verification of the ir scan, we need to get the input back.
- * We may have to allocate space if the caller didn't ask for the input back.
- *
- */
- if (jtag_verify_capture_ir)
- {
- int j;
- for (j = 0; j < num_fields; j++)
- {
- modified[j]=0;
- if ((fields[j].in_value==NULL)&&(fields[j].num_bits<=32))
- {
- if (j<8)
- {
- modified[j]=1;
- fields[j].in_value=(u8 *)(id+j);
- } else
- {
- LOG_DEBUG("caller must provide in_value space for verify_capture_ir to work");
- }
- }
- }
- }
-
- jtag_add_ir_scan_noverify(num_fields, fields, state);
-
- if (jtag_verify_capture_ir)
+ if (jtag_verify&&jtag_verify_capture_ir)
{
- int j;
- for (j = 0; j < num_fields; j++)
- {
- jtag_tap_t *tap=fields[j].tap;
- if (fields[j].in_value!=NULL)
- {
- /* we verify max 32 bit long irlens. */
- jtag_check_value_mask(fields+j, tap->expected, tap->expected_mask);
- }
-
- if (modified[j])
- {
- fields[j].in_value=NULL;
- }
- }
- }
-
-}
-
-int MINIDRIVER(interface_jtag_add_ir_scan)(int num_fields, scan_field_t *fields, tap_state_t state)
-{
- jtag_command_t **last_cmd;
- jtag_tap_t *tap;
- int j;
- int x;
- int nth_tap;
- int scan_size = 0;
-
- last_cmd = jtag_get_last_command_p();
-
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- (*last_cmd)->next = NULL;
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->type = JTAG_SCAN;
-
- /* allocate memory for ir scan command */
- (*last_cmd)->cmd.scan = cmd_queue_alloc(sizeof(scan_command_t));
- (*last_cmd)->cmd.scan->ir_scan = 1;
- x = jtag_NumEnabledTaps();
- (*last_cmd)->cmd.scan->num_fields = x; /* one field per device */
- (*last_cmd)->cmd.scan->fields = cmd_queue_alloc(x * sizeof(scan_field_t));
- (*last_cmd)->cmd.scan->end_state = state;
-
- nth_tap = -1;
- tap = NULL;
- for(;;){
- int found = 0;
-
- /* do this here so it is not forgotten */
- tap = jtag_NextEnabledTap(tap);
- if( tap == NULL ){
- break;
- }
- nth_tap++;
-
- assert(nth_tap < x );
+ /* 8 x 32 bit id's is enough for all invocations */
- scan_size = tap->ir_length;
- (*last_cmd)->cmd.scan->fields[nth_tap].tap = tap;
- (*last_cmd)->cmd.scan->fields[nth_tap].num_bits = scan_size;
- (*last_cmd)->cmd.scan->fields[nth_tap].in_value = NULL; /* do not collect input for tap's in bypass */
-
- /* search the list */
- for (j = 0; j < num_fields; j++)
- {
- if (tap == fields[j].tap)
- {
- found = 1;
- (*last_cmd)->cmd.scan->fields[nth_tap].in_value = fields[j].in_value;
- (*last_cmd)->cmd.scan->fields[nth_tap].out_value = buf_cpy(fields[j].out_value, cmd_queue_alloc(CEIL(scan_size, 8)), scan_size);
-
- tap->bypass = 0;
- break;
- }
- }
-
- if (!found)
+ for (int j = 0; j < in_num_fields; j++)
{
- /* if a tap isn't listed, set it to BYPASS */
- (*last_cmd)->cmd.scan->fields[nth_tap].out_value = buf_set_ones(cmd_queue_alloc(CEIL(scan_size, 8)), scan_size);
- tap->bypass = 1;
+ /* if we are to run a verification of the ir scan, we need to get the input back.
+ * We may have to allocate space if the caller didn't ask for the input back.
+ */
+ in_fields[j].check_value=in_fields[j].tap->expected;
+ in_fields[j].check_mask=in_fields[j].tap->expected_mask;
}
-
- /* update device information */
- buf_cpy((*last_cmd)->cmd.scan->fields[nth_tap].out_value, tap->cur_instr, scan_size);
+ jtag_add_scan_check(jtag_add_ir_scan_noverify, in_num_fields, in_fields, state);
+ } else
+ {
+ jtag_add_ir_scan_noverify(in_num_fields, in_fields, state);
}
- assert(nth_tap == (x-1));
-
- return ERROR_OK;
}
-void jtag_add_plain_ir_scan(int num_fields, scan_field_t *fields, tap_state_t state)
+/**
+ * Duplicate the scan fields passed into the function into an IR SCAN command
+ *
+ * This function assumes that the caller handles extra fields for bypassed TAPs
+ *
+ */
+void jtag_add_plain_ir_scan(int in_num_fields, const scan_field_t *in_fields, tap_state_t state)
{
int retval;
jtag_prelude(state);
- retval=interface_jtag_add_plain_ir_scan(num_fields, fields, cmd_queue_end_state);
+ retval=interface_jtag_add_plain_ir_scan(in_num_fields, in_fields, state);
if (retval!=ERROR_OK)
jtag_error=retval;
}
-int MINIDRIVER(interface_jtag_add_plain_ir_scan)(int num_fields, scan_field_t *fields, tap_state_t state)
+void jtag_add_callback(jtag_callback1_t f, u8 *in)
{
- int i;
- jtag_command_t **last_cmd;
-
- last_cmd = jtag_get_last_command_p();
-
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- (*last_cmd)->next = NULL;
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->type = JTAG_SCAN;
-
- /* allocate memory for ir scan command */
- (*last_cmd)->cmd.scan = cmd_queue_alloc(sizeof(scan_command_t));
- (*last_cmd)->cmd.scan->ir_scan = 1;
- (*last_cmd)->cmd.scan->num_fields = num_fields;
- (*last_cmd)->cmd.scan->fields = cmd_queue_alloc(num_fields * sizeof(scan_field_t));
- (*last_cmd)->cmd.scan->end_state = state;
-
- for( i = 0 ; i < num_fields ; i++ ){
- int num_bits = fields[i].num_bits;
- int num_bytes = CEIL(fields[i].num_bits, 8);
- (*last_cmd)->cmd.scan->fields[i].tap = fields[i].tap;
- (*last_cmd)->cmd.scan->fields[i].num_bits = num_bits;
- (*last_cmd)->cmd.scan->fields[i].out_value = buf_cpy(fields[i].out_value, cmd_queue_alloc(num_bytes), num_bits);
- (*last_cmd)->cmd.scan->fields[i].in_value = fields[i].in_value;
- }
- return ERROR_OK;
+ interface_jtag_add_callback(f, in);
}
-void jtag_add_dr_scan(int num_fields, scan_field_t *fields, tap_state_t state)
+void jtag_add_callback4(jtag_callback_t f, u8 *in,
+ jtag_callback_data_t data1, jtag_callback_data_t data2,
+ jtag_callback_data_t data3)
{
- int retval;
-
- jtag_prelude(state);
-
- retval=interface_jtag_add_dr_scan(num_fields, fields, cmd_queue_end_state);
- if (retval!=ERROR_OK)
- jtag_error=retval;
+ interface_jtag_add_callback4(f, in, data1, data2, data3);
}
-void jtag_add_dr_scan_now(int num_fields, scan_field_t *fields, tap_state_t state)
+int jtag_check_value_inner(u8 *captured, u8 *in_check_value, u8 *in_check_mask, int num_bits);
+
+static int jtag_check_value_mask_callback(u8 *in, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3)
{
- jtag_add_dr_scan(num_fields, fields, state);
- jtag_execute_queue_noclear();
+ return jtag_check_value_inner(in, (u8 *)data1, (u8 *)data2, (int)data3);
}
-int MINIDRIVER(interface_jtag_add_dr_scan)(int num_fields, scan_field_t *fields, tap_state_t state)
+static void jtag_add_scan_check(void (*jtag_add_scan)(int in_num_fields, const scan_field_t *in_fields, tap_state_t state),
+ int in_num_fields, scan_field_t *in_fields, tap_state_t state)
{
- int j;
- int nth_tap;
- int bypass_devices = 0;
- int field_count = 0;
- int scan_size;
-
- jtag_command_t **last_cmd = jtag_get_last_command_p();
- jtag_tap_t *tap;
-
- /* count devices in bypass */
- tap = NULL;
- bypass_devices = 0;
- for(;;){
- tap = jtag_NextEnabledTap(tap);
- if( tap == NULL ){
- break;
- }
- if( tap->bypass ){
- bypass_devices++;
- }
+ for (int i = 0; i < in_num_fields; i++)
+ {
+ struct scan_field_s *field = &in_fields[i];
+ field->allocated = 0;
+ field->modified = 0;
+ if (field->check_value || field->in_value)
+ continue;
+ interface_jtag_add_scan_check_alloc(field);
+ field->modified = 1;
}
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->next = NULL;
- (*last_cmd)->type = JTAG_SCAN;
-
- /* allocate memory for dr scan command */
- (*last_cmd)->cmd.scan = cmd_queue_alloc(sizeof(scan_command_t));
- (*last_cmd)->cmd.scan->ir_scan = 0;
- (*last_cmd)->cmd.scan->num_fields = num_fields + bypass_devices;
- (*last_cmd)->cmd.scan->fields = cmd_queue_alloc((num_fields + bypass_devices) * sizeof(scan_field_t));
- (*last_cmd)->cmd.scan->end_state = state;
-
- tap = NULL;
- nth_tap = -1;
- for(;;){
- nth_tap++;
- tap = jtag_NextEnabledTap(tap);
- if( tap == NULL ){
- break;
- }
- int found = 0;
- (*last_cmd)->cmd.scan->fields[field_count].tap = tap;
+ jtag_add_scan(in_num_fields, in_fields, state);
- for (j = 0; j < num_fields; j++)
+ for (int i = 0; i < in_num_fields; i++)
+ {
+ if ((in_fields[i].check_value != NULL) && (in_fields[i].in_value != NULL))
{
- if (tap == fields[j].tap)
- {
- found = 1;
- scan_size = fields[j].num_bits;
- (*last_cmd)->cmd.scan->fields[field_count].num_bits = scan_size;
- (*last_cmd)->cmd.scan->fields[field_count].out_value = buf_cpy(fields[j].out_value, cmd_queue_alloc(CEIL(scan_size, 8)), scan_size);
- (*last_cmd)->cmd.scan->fields[field_count].in_value = fields[j].in_value;
- field_count++;
- }
+ /* this is synchronous for a minidriver */
+ jtag_add_callback4(jtag_check_value_mask_callback, in_fields[i].in_value,
+ (jtag_callback_data_t)in_fields[i].check_value,
+ (jtag_callback_data_t)in_fields[i].check_mask,
+ (jtag_callback_data_t)in_fields[i].num_bits);
}
- if (!found)
+ if (in_fields[i].allocated)
{
-#ifdef _DEBUG_JTAG_IO_
- /* if a device isn't listed, the BYPASS register should be selected */
- if (! tap->bypass)
- {
- LOG_ERROR("BUG: no scan data for a device not in BYPASS");
- exit(-1);
- }
-#endif
- /* program the scan field to 1 bit length, and ignore it's value */
- (*last_cmd)->cmd.scan->fields[field_count].num_bits = 1;
- (*last_cmd)->cmd.scan->fields[field_count].out_value = NULL;
- (*last_cmd)->cmd.scan->fields[field_count].in_value = NULL;
- field_count++;
+ free(in_fields[i].in_value);
}
- else
+ if (in_fields[i].modified)
{
-#ifdef _DEBUG_JTAG_IO_
- /* if a device is listed, the BYPASS register must not be selected */
- if (tap->bypass)
- {
- LOG_ERROR("BUG: scan data for a device in BYPASS");
- exit(-1);
- }
-#endif
+ in_fields[i].in_value = NULL;
}
}
- return ERROR_OK;
}
-void MINIDRIVER(interface_jtag_add_dr_out)(jtag_tap_t *target_tap,
- int num_fields,
- const int *num_bits,
- const u32 *value,
- tap_state_t end_state)
+void jtag_add_dr_scan_check(int in_num_fields, scan_field_t *in_fields, tap_state_t state)
{
- int nth_tap;
- int field_count = 0;
- int scan_size;
- int bypass_devices = 0;
-
- jtag_command_t **last_cmd = jtag_get_last_command_p();
- jtag_tap_t *tap;
-
- /* count devices in bypass */
- tap = NULL;
- bypass_devices = 0;
- for(;;){
- tap = jtag_NextEnabledTap(tap);
- if( tap == NULL ){
- break;
- }
- if( tap->bypass ){
- bypass_devices++;
- }
+ if (jtag_verify)
+ {
+ jtag_add_scan_check(jtag_add_dr_scan, in_num_fields, in_fields, state);
+ } else
+ {
+ jtag_add_dr_scan(in_num_fields, in_fields, state);
}
+}
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->next = NULL;
- (*last_cmd)->type = JTAG_SCAN;
- /* allocate memory for dr scan command */
- (*last_cmd)->cmd.scan = cmd_queue_alloc(sizeof(scan_command_t));
- (*last_cmd)->cmd.scan->ir_scan = 0;
- (*last_cmd)->cmd.scan->num_fields = num_fields + bypass_devices;
- (*last_cmd)->cmd.scan->fields = cmd_queue_alloc((num_fields + bypass_devices) * sizeof(scan_field_t));
- (*last_cmd)->cmd.scan->end_state = end_state;
+/**
+ * Generate a DR SCAN using the fields passed to the function
+ *
+ * For not bypassed TAPs the function checks in_fields and uses fields specified there.
+ * For bypassed TAPs the function generates a dummy 1bit field.
+ *
+ * The bypass status of TAPs is set by jtag_add_ir_scan().
+ *
+ */
+void jtag_add_dr_scan(int in_num_fields, const scan_field_t *in_fields, tap_state_t state)
+{
+ int retval;
- tap = NULL;
- nth_tap = -1;
- for(;;){
- tap = jtag_NextEnabledTap(tap);
- if( tap == NULL ){
- break;
- }
- nth_tap++;
- (*last_cmd)->cmd.scan->fields[field_count].tap = tap;
+ jtag_prelude(state);
- if (tap == target_tap)
- {
- int j;
-#ifdef _DEBUG_JTAG_IO_
- /* if a device is listed, the BYPASS register must not be selected */
- if (tap->bypass)
- {
- LOG_ERROR("BUG: scan data for a device in BYPASS");
- exit(-1);
- }
-#endif
- for (j = 0; j < num_fields; j++)
- {
- u8 out_value[4];
- scan_size = num_bits[j];
- buf_set_u32(out_value, 0, scan_size, value[j]);
- (*last_cmd)->cmd.scan->fields[field_count].num_bits = scan_size;
- (*last_cmd)->cmd.scan->fields[field_count].out_value = buf_cpy(out_value, cmd_queue_alloc(CEIL(scan_size, 8)), scan_size);
- (*last_cmd)->cmd.scan->fields[field_count].in_value = NULL;
- field_count++;
- }
- } else
- {
-#ifdef _DEBUG_JTAG_IO_
- /* if a device isn't listed, the BYPASS register should be selected */
- if (! tap->bypass)
- {
- LOG_ERROR("BUG: no scan data for a device not in BYPASS");
- exit(-1);
- }
-#endif
- /* program the scan field to 1 bit length, and ignore it's value */
- (*last_cmd)->cmd.scan->fields[field_count].num_bits = 1;
- (*last_cmd)->cmd.scan->fields[field_count].out_value = NULL;
- (*last_cmd)->cmd.scan->fields[field_count].in_value = NULL;
- field_count++;
- }
- }
+ retval=interface_jtag_add_dr_scan(in_num_fields, in_fields, state);
+ if (retval!=ERROR_OK)
+ jtag_error=retval;
}
-void jtag_add_plain_dr_scan(int num_fields, scan_field_t *fields, tap_state_t state)
+
+
+/**
+ * Duplicate the scan fields passed into the function into a DR SCAN command
+ *
+ * This function assumes that the caller handles extra fields for bypassed TAPs
+ *
+ */
+void jtag_add_plain_dr_scan(int in_num_fields, const scan_field_t *in_fields, tap_state_t state)
{
int retval;
jtag_prelude(state);
- retval=interface_jtag_add_plain_dr_scan(num_fields, fields, cmd_queue_end_state);
+ retval=interface_jtag_add_plain_dr_scan(in_num_fields, in_fields, state);
if (retval!=ERROR_OK)
jtag_error=retval;
}
-int MINIDRIVER(interface_jtag_add_plain_dr_scan)(int num_fields, scan_field_t *fields, tap_state_t state)
+void jtag_add_dr_out(jtag_tap_t* tap,
+ int num_fields, const int* num_bits, const u32* value,
+ tap_state_t end_state)
{
- int i;
- jtag_command_t **last_cmd = jtag_get_last_command_p();
-
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->next = NULL;
- (*last_cmd)->type = JTAG_SCAN;
-
- /* allocate memory for scan command */
- (*last_cmd)->cmd.scan = cmd_queue_alloc(sizeof(scan_command_t));
- (*last_cmd)->cmd.scan->ir_scan = 0;
- (*last_cmd)->cmd.scan->num_fields = num_fields;
- (*last_cmd)->cmd.scan->fields = cmd_queue_alloc(num_fields * sizeof(scan_field_t));
- (*last_cmd)->cmd.scan->end_state = state;
+ assert(end_state != TAP_INVALID);
- for (i = 0; i < num_fields; i++)
- {
- int num_bits = fields[i].num_bits;
- int num_bytes = CEIL(fields[i].num_bits, 8);
- (*last_cmd)->cmd.scan->fields[i].tap = fields[i].tap;
- (*last_cmd)->cmd.scan->fields[i].num_bits = num_bits;
- (*last_cmd)->cmd.scan->fields[i].out_value = buf_cpy(fields[i].out_value, cmd_queue_alloc(num_bytes), num_bits);
- (*last_cmd)->cmd.scan->fields[i].in_value = fields[i].in_value;
- }
+ cmd_queue_cur_state = end_state;
- return ERROR_OK;
+ interface_jtag_add_dr_out(tap,
+ num_fields, num_bits, value,
+ end_state);
}
void jtag_add_tlr(void)
retval=interface_jtag_add_tlr();
if (retval!=ERROR_OK)
jtag_error=retval;
+
+ jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
}
-int MINIDRIVER(interface_jtag_add_tlr)(void)
-{
- tap_state_t state = TAP_RESET;
- jtag_command_t **last_cmd = jtag_get_last_command_p();
-
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->next = NULL;
- (*last_cmd)->type = JTAG_STATEMOVE;
-
- (*last_cmd)->cmd.statemove = cmd_queue_alloc(sizeof(statemove_command_t));
- (*last_cmd)->cmd.statemove->end_state = state;
-
- return ERROR_OK;
-}
-
-void jtag_add_pathmove(int num_states, tap_state_t *path)
+void jtag_add_pathmove(int num_states, const tap_state_t *path)
{
tap_state_t cur_state = cmd_queue_cur_state;
int i;
cur_state = path[i];
}
- jtag_prelude1();
+ jtag_checks();
retval = interface_jtag_add_pathmove(num_states, path);
cmd_queue_cur_state = path[num_states - 1];
jtag_error=retval;
}
-int MINIDRIVER(interface_jtag_add_pathmove)(int num_states, tap_state_t *path)
-{
- jtag_command_t **last_cmd = jtag_get_last_command_p();
- int i;
-
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->next = NULL;
- (*last_cmd)->type = JTAG_PATHMOVE;
-
- (*last_cmd)->cmd.pathmove = cmd_queue_alloc(sizeof(pathmove_command_t));
- (*last_cmd)->cmd.pathmove->num_states = num_states;
- (*last_cmd)->cmd.pathmove->path = cmd_queue_alloc(sizeof(tap_state_t) * num_states);
-
- for (i = 0; i < num_states; i++)
- (*last_cmd)->cmd.pathmove->path[i] = path[i];
-
- return ERROR_OK;
-}
-
-int MINIDRIVER(interface_jtag_add_runtest)(int num_cycles, tap_state_t state)
-{
- jtag_command_t **last_cmd = jtag_get_last_command_p();
-
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- (*last_cmd)->next = NULL;
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->type = JTAG_RUNTEST;
-
- (*last_cmd)->cmd.runtest = cmd_queue_alloc(sizeof(runtest_command_t));
- (*last_cmd)->cmd.runtest->num_cycles = num_cycles;
- (*last_cmd)->cmd.runtest->end_state = state;
-
- return ERROR_OK;
-}
-
void jtag_add_runtest(int num_cycles, tap_state_t state)
{
int retval;
jtag_prelude(state);
/* executed by sw or hw fifo */
- retval=interface_jtag_add_runtest(num_cycles, cmd_queue_end_state);
+ retval=interface_jtag_add_runtest(num_cycles, state);
if (retval!=ERROR_OK)
jtag_error=retval;
}
-int MINIDRIVER(interface_jtag_add_clocks)( int num_cycles )
-{
- jtag_command_t **last_cmd = jtag_get_last_command_p();
-
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- (*last_cmd)->next = NULL;
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->type = JTAG_STABLECLOCKS;
-
- (*last_cmd)->cmd.stableclocks = cmd_queue_alloc(sizeof(stableclocks_command_t));
- (*last_cmd)->cmd.stableclocks->num_cycles = num_cycles;
- return ERROR_OK;
-}
-
void jtag_add_clocks( int num_cycles )
{
int retval;
if( num_cycles > 0 )
{
- jtag_prelude1();
+ jtag_checks();
retval = interface_jtag_add_clocks(num_cycles);
if (retval != ERROR_OK)
jtag_error=retval;
return;
}
+ jtag_execute_queue();
if (jtag_srst)
{
if (trst_with_tlr)
{
LOG_DEBUG("JTAG reset with RESET instead of TRST");
- jtag_add_end_state(TAP_RESET);
+ jtag_set_end_state(TAP_RESET);
jtag_add_tlr();
- jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
return;
}
* and inform possible listeners about this
*/
LOG_DEBUG("TRST line asserted");
- cmd_queue_cur_state = TAP_RESET;
+ tap_set_state(TAP_RESET);
jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
}
else
}
}
-int MINIDRIVER(interface_jtag_add_reset)(int req_trst, int req_srst)
+tap_state_t jtag_set_end_state(tap_state_t state)
{
- jtag_command_t **last_cmd = jtag_get_last_command_p();
-
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- (*last_cmd)->next = NULL;
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->type = JTAG_RESET;
-
- (*last_cmd)->cmd.reset = cmd_queue_alloc(sizeof(reset_command_t));
- (*last_cmd)->cmd.reset->trst = req_trst;
- (*last_cmd)->cmd.reset->srst = req_srst;
-
- return ERROR_OK;
-}
-
-void jtag_add_end_state(tap_state_t state)
-{
- cmd_queue_end_state = state;
- if ((cmd_queue_end_state == TAP_DRSHIFT)||(cmd_queue_end_state == TAP_IRSHIFT))
+ if ((state == TAP_DRSHIFT)||(state == TAP_IRSHIFT))
{
LOG_ERROR("BUG: TAP_DRSHIFT/IRSHIFT can't be end state. Calling code should use a larger scan field");
}
+
+ if (state!=TAP_INVALID)
+ cmd_queue_end_state = state;
+ return cmd_queue_end_state;
}
-int MINIDRIVER(interface_jtag_add_sleep)(u32 us)
+tap_state_t jtag_get_end_state(void)
{
- jtag_command_t **last_cmd = jtag_get_last_command_p();
-
- /* allocate memory for a new list member */
- *last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
- (*last_cmd)->next = NULL;
- last_comand_pointer = &((*last_cmd)->next);
- (*last_cmd)->type = JTAG_SLEEP;
-
- (*last_cmd)->cmd.sleep = cmd_queue_alloc(sizeof(sleep_command_t));
- (*last_cmd)->cmd.sleep->us = us;
-
- return ERROR_OK;
+ return cmd_queue_end_state;
}
void jtag_add_sleep(u32 us)
return;
}
-int jtag_scan_size(scan_command_t *cmd)
-{
- int bit_count = 0;
- int i;
-
- /* count bits in scan command */
- for (i = 0; i < cmd->num_fields; i++)
- {
- bit_count += cmd->fields[i].num_bits;
- }
-
- return bit_count;
-}
-
-int jtag_build_buffer(scan_command_t *cmd, u8 **buffer)
-{
- int bit_count = 0;
- int i;
-
- bit_count = jtag_scan_size(cmd);
- *buffer = malloc(CEIL(bit_count, 8));
-
- bit_count = 0;
-
-#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG("%s num_fields: %i", cmd->ir_scan ? "IRSCAN" : "DRSCAN", cmd->num_fields);
-#endif
-
- for (i = 0; i < cmd->num_fields; i++)
- {
- if (cmd->fields[i].out_value)
- {
-#ifdef _DEBUG_JTAG_IO_
- char* char_buf = buf_to_str(cmd->fields[i].out_value, (cmd->fields[i].num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : cmd->fields[i].num_bits, 16);
-#endif
- buf_set_buf(cmd->fields[i].out_value, 0, *buffer, bit_count, cmd->fields[i].num_bits);
-#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG("fields[%i].out_value[%i]: 0x%s", i, cmd->fields[i].num_bits, char_buf);
- free(char_buf);
-#endif
- }
- else
- {
-#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG("fields[%i].out_value[%i]: NULL", i, cmd->fields[i].num_bits);
-#endif
- }
-
- bit_count += cmd->fields[i].num_bits;
- }
-
-#ifdef _DEBUG_JTAG_IO_
- //LOG_DEBUG("bit_count totalling: %i", bit_count );
-#endif
-
- return bit_count;
-}
-
-int jtag_read_buffer(u8 *buffer, scan_command_t *cmd)
-{
- int i;
- int bit_count = 0;
- int retval;
-
- /* we return ERROR_OK, unless a check fails, or a handler reports a problem */
- retval = ERROR_OK;
-
- for (i = 0; i < cmd->num_fields; i++)
- {
- /* if neither in_value nor in_handler
- * are specified we don't have to examine this field
- */
- if (cmd->fields[i].in_value)
- {
- int num_bits = cmd->fields[i].num_bits;
- u8 *captured = buf_set_buf(buffer, bit_count, malloc(CEIL(num_bits, 8)), 0, num_bits);
-
-#ifdef _DEBUG_JTAG_IO_
- char *char_buf = buf_to_str(captured, (num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : num_bits, 16);
- LOG_DEBUG("fields[%i].in_value[%i]: 0x%s", i, num_bits, char_buf);
- free(char_buf);
-#endif
-
- if (cmd->fields[i].in_value)
- {
- buf_cpy(captured, cmd->fields[i].in_value, num_bits);
- }
-
- free(captured);
- }
- bit_count += cmd->fields[i].num_bits;
- }
-
- return retval;
-}
-
-static const char *jtag_tap_name(jtag_tap_t *tap)
-{
- return (tap == NULL) ? "(unknown)" : tap->dotted_name;
-}
-
-int jtag_check_value_inner(u8 *captured, scan_field_t *field, u8 *in_check_value, u8 *in_check_mask)
+int jtag_check_value_inner(u8 *captured, u8 *in_check_value, u8 *in_check_mask, int num_bits)
{
int retval = ERROR_OK;
- int num_bits = field->num_bits;
int compare_failed = 0;
* only report a problem when there wasn't a handler, or if the handler
* acknowledged the error
*/
+ /*
LOG_WARNING("TAP %s:",
jtag_tap_name(field->tap));
+ */
if (compare_failed)
{
char *captured_char = buf_to_str(captured, (num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : num_bits, 16);
jtag_execute_queue_noclear();
- int retval=jtag_check_value_inner(field->in_value, field, value, mask);
+ int retval=jtag_check_value_inner(field->in_value, value, mask, field->num_bits);
jtag_set_error(retval);
}
-enum scan_type jtag_scan_type(scan_command_t *cmd)
-{
- int i;
- int type = 0;
-
- for (i = 0; i < cmd->num_fields; i++)
- {
- if (cmd->fields[i].in_value)
- type |= SCAN_IN;
- if (cmd->fields[i].out_value)
- type |= SCAN_OUT;
- }
-
- return type;
-}
-
-
-#ifndef HAVE_JTAG_MINIDRIVER_H
-/* add callback to end of queue */
-void jtag_add_callback3(jtag_callback_t callback, u8 *in, jtag_callback_data_t data1, jtag_callback_data_t data2)
-{
- struct jtag_callback_entry *entry=cmd_queue_alloc(sizeof(struct jtag_callback_entry));
-
- entry->next=NULL;
- entry->callback=callback;
- entry->in=in;
- entry->data1=data1;
- entry->data2=data2;
-
- if (jtag_callback_queue_head==NULL)
- {
- jtag_callback_queue_head=entry;
- jtag_callback_queue_tail=entry;
- } else
- {
- jtag_callback_queue_tail->next=entry;
- jtag_callback_queue_tail=entry;
- }
-}
-
-
-static int jtag_convert_to_callback3(u8 *in, jtag_callback_data_t data1, jtag_callback_data_t data2)
-{
- ((jtag_callback1_t)data1)(in);
- return ERROR_OK;
-}
-
-void jtag_add_callback(jtag_callback1_t callback, u8 *in)
-{
- jtag_add_callback3(jtag_convert_to_callback3, in, (jtag_callback_data_t)callback, 0);
-}
-#endif
-
-#ifndef HAVE_JTAG_MINIDRIVER_H
-
-int interface_jtag_execute_queue(void)
-{
- int retval;
-
- if (jtag==NULL)
- {
- LOG_ERROR("No JTAG interface configured yet. Issue 'init' command in startup scripts before communicating with targets.");
- return ERROR_FAIL;
- }
-
- retval = jtag->execute_queue();
-
- if (retval == ERROR_OK)
+int default_interface_jtag_execute_queue(void)
+{
+ if (NULL == jtag)
{
- struct jtag_callback_entry *entry;
- for (entry=jtag_callback_queue_head; entry!=NULL; entry=entry->next)
- {
- retval=entry->callback(entry->in, entry->data1, entry->data2);
- if (retval!=ERROR_OK)
- break;
- }
+ LOG_ERROR("No JTAG interface configured yet. "
+ "Issue 'init' command in startup scripts "
+ "before communicating with targets.");
+ return ERROR_FAIL;
}
- cmd_queue_free();
-
- jtag_callback_queue_head = NULL;
- jtag_callback_queue_tail = NULL;
-
- jtag_command_queue = NULL;
- last_comand_pointer = &jtag_command_queue;
-
- return retval;
+ return jtag->execute_queue();
}
-#endif
void jtag_execute_queue_noclear(void)
{
}
}
+int jtag_get_flush_queue_count(void)
+{
+ return jtag_flush_queue_count;
+}
+
int jtag_execute_queue(void)
{
int retval;
return retval;
}
-int jtag_reset_callback(enum jtag_event event, void *priv)
+static int jtag_reset_callback(enum jtag_event event, void *priv)
{
jtag_tap_t *tap = priv;
/* Try to examine chain layout according to IEEE 1149.1 §12
*/
-int jtag_examine_chain(void)
+static int jtag_examine_chain(void)
{
jtag_tap_t *tap;
scan_field_t field;
if (device_count != jtag_NumEnabledTaps())
{
LOG_ERROR("number of discovered devices in JTAG chain (%i) doesn't match (enabled) configuration (%i), total taps: %d",
- device_count, jtag_NumEnabledTaps(), jtag_NumTotalTaps());
+ device_count, jtag_NumEnabledTaps(), jtag_tap_count());
LOG_ERROR("check the config file and ensure proper JTAG communication (connections, speed, ...)");
return ERROR_JTAG_INIT_FAILED;
}
return ERROR_OK;
}
-int jtag_validate_chain(void)
+static int jtag_validate_chain(void)
{
jtag_tap_t *tap;
int total_ir_length = 0;
return JIM_OK;
}
+
+static void jtag_tap_init(jtag_tap_t *tap)
+{
+ assert(0 != tap->ir_length);
+
+ tap->expected = malloc(tap->ir_length);
+ tap->expected_mask = malloc(tap->ir_length);
+ tap->cur_instr = malloc(tap->ir_length);
+
+ buf_set_u32(tap->expected, 0, tap->ir_length, tap->ir_capture_value);
+ buf_set_u32(tap->expected_mask, 0, tap->ir_length, tap->ir_capture_mask);
+ buf_set_ones(tap->cur_instr, tap->ir_length);
+
+ // place TAP in bypass mode
+ tap->bypass = 1;
+ // register the reset callback for the TAP
+ jtag_register_event_callback(&jtag_reset_callback, tap);
+
+ LOG_DEBUG("Created Tap: %s @ abs position %d, "
+ "irlen %d, capture: 0x%x mask: 0x%x", tap->dotted_name,
+ tap->abs_chain_position, tap->ir_length,
+ tap->ir_capture_value, tap->ir_capture_mask);
+ jtag_tap_add(tap);
+}
+
+static void jtag_tap_free(jtag_tap_t *tap)
+{
+ /// @todo is anything missing? no memory leaks please
+ free((void *)tap->expected_ids);
+ free((void *)tap->chip);
+ free((void *)tap->tapname);
+ free((void *)tap->dotted_name);
+ free(tap);
+}
+
static int jim_newtap_cmd( Jim_GetOptInfo *goi )
{
jtag_tap_t *pTap;
- jtag_tap_t **ppTap;
jim_wide w;
int x;
int e;
} /* switch(n->value) */
} /* while( goi->argc ) */
- /* Did we get all the options? */
- if( reqbits ){
- // no
- Jim_SetResult_sprintf( goi->interp,
- "newtap: %s missing required parameters",
- pTap->dotted_name);
- /* TODO: Tell user what is missing :-( */
- /* no memory leaks pelase */
- free(((void *)(pTap->expected_ids)));
- free(((void *)(pTap->chip)));
- free(((void *)(pTap->tapname)));
- free(((void *)(pTap->dotted_name)));
- free(((void *)(pTap)));
- return JIM_ERR;
- }
-
- pTap->expected = malloc( pTap->ir_length );
- pTap->expected_mask = malloc( pTap->ir_length );
- pTap->cur_instr = malloc( pTap->ir_length );
-
- buf_set_u32( pTap->expected,
- 0,
- pTap->ir_length,
- pTap->ir_capture_value );
- buf_set_u32( pTap->expected_mask,
- 0,
- pTap->ir_length,
- pTap->ir_capture_mask );
- buf_set_ones( pTap->cur_instr,
- pTap->ir_length );
-
- pTap->bypass = 1;
-
- jtag_register_event_callback(jtag_reset_callback, pTap );
-
- ppTap = &(jtag_all_taps);
- while( (*ppTap) != NULL ){
- ppTap = &((*ppTap)->next_tap);
- }
- *ppTap = pTap;
+ /* Did all the required option bits get cleared? */
+ if (0 == reqbits)
{
- static int n_taps = 0;
- pTap->abs_chain_position = n_taps++;
+ jtag_tap_init(pTap);
+ return ERROR_OK;
}
- LOG_DEBUG( "Created Tap: %s @ abs position %d, irlen %d, capture: 0x%x mask: 0x%x",
- (*ppTap)->dotted_name,
- (*ppTap)->abs_chain_position,
- (*ppTap)->ir_length,
- (*ppTap)->ir_capture_value,
- (*ppTap)->ir_capture_mask );
- return ERROR_OK;
+ Jim_SetResult_sprintf(goi->interp,
+ "newtap: %s missing required parameters",
+ pTap->dotted_name);
+ jtag_tap_free(pTap);
+ return JIM_ERR;
}
static int jim_jtag_command( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
{
jtag_tap_t *t;
- t = jtag_TapByJimObj( goi.interp, goi.argv[0] );
+ t = jtag_tap_by_jim_obj( goi.interp, goi.argv[0] );
if( t == NULL ){
return JIM_ERR;
}
jtag_tap_t *t;
Jim_GetOpt_Obj(&goi, &o);
- t = jtag_TapByJimObj( goi.interp, o );
+ t = jtag_tap_by_jim_obj( goi.interp, o );
if( t == NULL ){
return JIM_ERR;
}
jtag_tap_t *t;
Jim_GetOpt_Obj(&goi, &o);
- t = jtag_TapByJimObj( goi.interp, o );
+ t = jtag_tap_by_jim_obj( goi.interp, o );
if( t == NULL ){
return JIM_ERR;
}
register_command(cmd_ctx, NULL, "interface", handle_interface_command,
COMMAND_CONFIG, "try to configure interface");
register_command(cmd_ctx, NULL, "jtag_speed", handle_jtag_speed_command,
- COMMAND_ANY, "set jtag speed (if supported)");
+ COMMAND_ANY, "(DEPRECATED) set jtag speed (if supported)");
register_command(cmd_ctx, NULL, "jtag_khz", handle_jtag_khz_command,
- COMMAND_ANY, "same as jtag_speed, except it takes maximum khz as arguments. 0 KHz = RTCK.");
+ COMMAND_ANY, "set maximum jtag speed (if supported); "
+ "parameter is maximum khz, or 0 for adaptive clocking (RTCK).");
register_command(cmd_ctx, NULL, "jtag_device", handle_jtag_device_command,
- COMMAND_CONFIG, "jtag_device <ir_length> <ir_expected> <ir_mask>");
+ COMMAND_CONFIG, "(DEPRECATED) jtag_device <ir_length> <ir_expected> <ir_mask>");
register_command(cmd_ctx, NULL, "reset_config", handle_reset_config_command,
COMMAND_ANY,
"[none/trst_only/srst_only/trst_and_srst] [srst_pulls_trst/trst_pulls_srst] [combined/separate] [trst_push_pull/trst_open_drain] [srst_push_pull/srst_open_drain]");
register_command(cmd_ctx, NULL, "verify_ircapture", handle_verify_ircapture_command,
COMMAND_ANY, "verify value captured during Capture-IR <enable|disable>");
+ register_command(cmd_ctx, NULL, "verify_jtag", handle_verify_jtag_command,
+ COMMAND_ANY, "verify value capture <enable|disable>");
+ register_command(cmd_ctx, NULL, "tms_sequence", handle_tms_sequence_command,
+ COMMAND_ANY, "choose short(default) or long tms_sequence <short|long>");
return ERROR_OK;
}
}
if(hasKHz)
{
- jtag_interface->khz(speed_khz, &jtag_speed);
- hasKHz = 0;
+ jtag_interface->khz(jtag_get_speed_khz(), &jtag_speed);
+ hasKHz = false;
}
if (jtag_interface->init() != ERROR_OK)
return ERROR_OK;
}
+int jtag_interface_quit(void)
+{
+ if (!jtag || !jtag->quit)
+ return ERROR_OK;
+
+ // close the JTAG interface
+ int result = jtag->quit();
+ if (ERROR_OK != result)
+ LOG_ERROR("failed: %d", result);
+
+ return ERROR_OK;
+}
+
+
int jtag_init_reset(struct command_context_s *cmd_ctx)
{
int retval;
return jtag_init_reset(cmd_ctx);
}
+void jtag_set_speed_khz(unsigned khz)
+{
+ speed_khz = khz;
+}
+unsigned jtag_get_speed_khz(void)
+{
+ return speed_khz;
+}
+
static int default_khz(int khz, int *jtag_speed)
{
LOG_ERROR("Translation from khz to jtag_speed not implemented");
newargs[0] = Jim_NewStringObj( interp, "jtag", -1 );
newargs[1] = Jim_NewStringObj( interp, "newtap", -1 );
- sprintf( buf, "chip%d", jtag_NumTotalTaps() );
+ sprintf( buf, "chip%d", jtag_tap_count() );
newargs[2] = Jim_NewStringObj( interp, buf, -1 );
- sprintf( buf, "tap%d", jtag_NumTotalTaps() );
+ sprintf( buf, "tap%d", jtag_tap_count() );
newargs[3] = Jim_NewStringObj( interp, buf, -1 );
newargs[4] = Jim_NewStringObj( interp, "-irlen", -1 );
newargs[5] = Jim_NewStringObj( interp, args[0], -1 );
{
jtag_tap_t *tap;
- tap = jtag_all_taps;
+ tap = jtag_all_taps();
command_print(cmd_ctx, " TapName | Enabled | IdCode Expected IrLen IrCap IrMask Instr ");
command_print(cmd_ctx, "---|--------------------|---------|------------|------------|------|------|------|---------");
static int handle_reset_config_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
+ int new_cfg = 0;
+ int mask = 0;
+
if (argc < 1)
return ERROR_COMMAND_SYNTAX_ERROR;
- if (argc >= 1)
- {
- if (strcmp(args[0], "none") == 0)
- jtag_reset_config = RESET_NONE;
- else if (strcmp(args[0], "trst_only") == 0)
- jtag_reset_config = RESET_HAS_TRST;
- else if (strcmp(args[0], "srst_only") == 0)
- jtag_reset_config = RESET_HAS_SRST;
- else if (strcmp(args[0], "trst_and_srst") == 0)
- jtag_reset_config = RESET_TRST_AND_SRST;
+ /* Original versions cared about the order of these tokens:
+ * reset_config signals [combination [trst_type [srst_type]]]
+ * They also clobbered the previous configuration even on error.
+ *
+ * Here we don't care about the order, and only change values
+ * which have been explicitly specified.
+ */
+ for (; argc; argc--, args++) {
+ int tmp = 0;
+ int m;
+
+ /* signals */
+ m = RESET_HAS_TRST | RESET_HAS_SRST;
+ if (strcmp(*args, "none") == 0)
+ tmp = RESET_NONE;
+ else if (strcmp(*args, "trst_only") == 0)
+ tmp = RESET_HAS_TRST;
+ else if (strcmp(*args, "srst_only") == 0)
+ tmp = RESET_HAS_SRST;
+ else if (strcmp(*args, "trst_and_srst") == 0)
+ tmp = RESET_HAS_TRST | RESET_HAS_SRST;
else
- {
- LOG_ERROR("(1) invalid reset_config argument (%s), defaulting to none", args[0]);
- jtag_reset_config = RESET_NONE;
+ m = 0;
+ if (mask & m) {
+ LOG_ERROR("extra reset_config %s spec (%s)",
+ "signal", *args);
return ERROR_INVALID_ARGUMENTS;
}
- }
-
- if (argc >= 2)
- {
- if (strcmp(args[1], "separate") == 0)
- {
- /* seperate reset lines - default */
- } else
- {
- if (strcmp(args[1], "srst_pulls_trst") == 0)
- jtag_reset_config |= RESET_SRST_PULLS_TRST;
- else if (strcmp(args[1], "trst_pulls_srst") == 0)
- jtag_reset_config |= RESET_TRST_PULLS_SRST;
- else if (strcmp(args[1], "combined") == 0)
- jtag_reset_config |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
- else
- {
- LOG_ERROR("(2) invalid reset_config argument (%s), defaulting to none", args[1]);
- jtag_reset_config = RESET_NONE;
- return ERROR_INVALID_ARGUMENTS;
- }
+ if (m)
+ goto next;
+
+ /* combination (options for broken wiring) */
+ m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
+ if (strcmp(*args, "separate") == 0)
+ /* separate reset lines - default */;
+ else if (strcmp(*args, "srst_pulls_trst") == 0)
+ tmp |= RESET_SRST_PULLS_TRST;
+ else if (strcmp(*args, "trst_pulls_srst") == 0)
+ tmp |= RESET_TRST_PULLS_SRST;
+ else if (strcmp(*args, "combined") == 0)
+ tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
+ else
+ m = 0;
+ if (mask & m) {
+ LOG_ERROR("extra reset_config %s spec (%s)",
+ "combination", *args);
+ return ERROR_INVALID_ARGUMENTS;
}
- }
+ if (m)
+ goto next;
- if (argc >= 3)
- {
- if (strcmp(args[2], "trst_open_drain") == 0)
- jtag_reset_config |= RESET_TRST_OPEN_DRAIN;
- else if (strcmp(args[2], "trst_push_pull") == 0)
- jtag_reset_config &= ~RESET_TRST_OPEN_DRAIN;
+ /* trst_type (NOP without HAS_TRST) */
+ m = RESET_TRST_OPEN_DRAIN;
+ if (strcmp(*args, "trst_open_drain") == 0)
+ tmp |= RESET_TRST_OPEN_DRAIN;
+ else if (strcmp(*args, "trst_push_pull") == 0)
+ /* push/pull from adapter - default */;
else
- {
- LOG_ERROR("(3) invalid reset_config argument (%s) defaulting to none", args[2] );
- jtag_reset_config = RESET_NONE;
+ m = 0;
+ if (mask & m) {
+ LOG_ERROR("extra reset_config %s spec (%s)",
+ "trst_type", *args);
return ERROR_INVALID_ARGUMENTS;
}
- }
+ if (m)
+ goto next;
- if (argc >= 4)
- {
- if (strcmp(args[3], "srst_push_pull") == 0)
- jtag_reset_config |= RESET_SRST_PUSH_PULL;
- else if (strcmp(args[3], "srst_open_drain") == 0)
- jtag_reset_config &= ~RESET_SRST_PUSH_PULL;
+ /* srst_type (NOP without HAS_SRST) */
+ m |= RESET_SRST_PUSH_PULL;
+ if (strcmp(*args, "srst_push_pull") == 0)
+ tmp |= RESET_SRST_PUSH_PULL;
+ else if (strcmp(*args, "srst_open_drain") == 0)
+ /* open drain from adapter - default */;
else
- {
- LOG_ERROR("(4) invalid reset_config argument (%s), defaulting to none", args[3]);
- jtag_reset_config = RESET_NONE;
+ m = 0;
+ if (mask & m) {
+ LOG_ERROR("extra reset_config %s spec (%s)",
+ "srst_type", *args);
return ERROR_INVALID_ARGUMENTS;
}
+ if (m)
+ goto next;
+
+ /* caller provided nonsense; fail */
+ LOG_ERROR("unknown reset_config flag (%s)", *args);
+ return ERROR_INVALID_ARGUMENTS;
+
+next:
+ /* Remember the bits which were specified (mask)
+ * and their new values (new_cfg).
+ */
+ mask |= m;
+ new_cfg |= tmp;
}
+ /* clear previous values of those bits, save new values */
+ jtag_reset_config &= ~mask;
+ jtag_reset_config |= new_cfg;
+
return ERROR_OK;
}
}
else
{
- jtag_nsrst_delay = strtoul(args[0], NULL, 0);
+ jtag_set_nsrst_delay(strtoul(args[0], NULL, 0));
}
return ERROR_OK;
}
else
{
- jtag_ntrst_delay = strtoul(args[0], NULL, 0);
+ jtag_set_ntrst_delay(strtoul(args[0], NULL, 0));
}
return ERROR_OK;
}
+
static int handle_jtag_speed_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
int retval=ERROR_OK;
int retval=ERROR_OK;
LOG_DEBUG("handle jtag khz");
+ int cur_speed = 0;
if(argc == 1)
{
- speed_khz = strtoul(args[0], NULL, 0);
+ jtag_set_speed_khz(strtoul(args[0], NULL, 0));
if (jtag != NULL)
{
- int cur_speed = 0;
LOG_DEBUG("have interface set up");
int speed_div1;
- if ((retval=jtag->khz(speed_khz, &speed_div1))!=ERROR_OK)
+ if ((retval=jtag->khz(jtag_get_speed_khz(), &speed_div1))!=ERROR_OK)
{
- speed_khz = 0;
+ jtag_set_speed_khz(0);
return retval;
}
retval=jtag->speed(cur_speed);
} else
{
- hasKHz = 1;
+ hasKHz = true;
}
} else if (argc==0)
{
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
+ cur_speed = jtag_get_speed_khz();
if (jtag!=NULL)
{
- if ((retval=jtag->speed_div(jtag_speed, &speed_khz))!=ERROR_OK)
+ if ((retval=jtag->speed_div(jtag_speed, &cur_speed))!=ERROR_OK)
return retval;
}
- if (speed_khz==0)
- {
+ if (cur_speed)
+ command_print(cmd_ctx, "%d kHz", cur_speed);
+ else
command_print(cmd_ctx, "RCLK - adaptive");
- } else
- {
- command_print(cmd_ctx, "%d kHz", speed_khz);
- }
return retval;
}
command_print( cmd_ctx, "Invalid state name: %s\n", args[0] );
return ERROR_COMMAND_SYNTAX_ERROR;
}
- jtag_add_end_state(state);
+ jtag_set_end_state(state);
jtag_execute_queue();
}
command_print(cmd_ctx, "current endstate: %s", tap_state_name(cmd_queue_end_state));
return ERROR_COMMAND_SYNTAX_ERROR;
}
- jtag_add_runtest(strtol(args[0], NULL, 0), TAP_INVALID);
+ jtag_add_runtest(strtol(args[0], NULL, 0), jtag_get_end_state());
jtag_execute_queue();
return ERROR_OK;
}
+/*
+ * For "irscan" or "drscan" commands, the "end" (really, "next") state
+ * should be stable ... and *NOT* a shift state, otherwise free-running
+ * jtag clocks could change the values latched by the update state.
+ */
+static bool scan_is_safe(tap_state_t state)
+{
+ switch (state)
+ {
+ case TAP_RESET:
+ case TAP_IDLE:
+ case TAP_DRPAUSE:
+ case TAP_IRPAUSE:
+ return true;
+ default:
+ return false;
+ }
+}
+
+
static int handle_irscan_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
int i;
return ERROR_COMMAND_SYNTAX_ERROR;
}
- /* optional "-endstate" */
- /* "statename" */
- /* at the end of the arguments. */
- /* assume none. */
- endstate = TAP_INVALID;
+ /* optional "-endstate" "statename" at the end of the arguments,
+ * so that e.g. IRPAUSE can let us load the data register before
+ * entering RUN/IDLE to execute the instruction we load here.
+ */
+ endstate = TAP_IDLE;
+
if( argc >= 4 ){
/* have at least one pair of numbers. */
/* is last pair the magic text? */
if( endstate >= TAP_NUM_STATES ){
return ERROR_COMMAND_SYNTAX_ERROR;
} else {
+ if (!scan_is_safe(endstate))
+ LOG_WARNING("irscan with unsafe "
+ "endstate \"%s\"", cpA);
/* found - remove the last 2 args */
argc -= 2;
}
}
}
- fields = malloc(sizeof(scan_field_t) * argc / 2);
+ int num_fields = argc / 2;
- for (i = 0; i < argc / 2; i++)
+ fields = malloc(sizeof(scan_field_t) * num_fields);
+
+ for (i = 0; i < num_fields; i++)
{
- tap = jtag_TapByString( args[i*2] );
+ tap = jtag_tap_by_string( args[i*2] );
if (tap==NULL)
{
command_print( cmd_ctx, "Tap: %s unknown", args[i*2] );
}
int field_size = tap->ir_length;
fields[i].tap = tap;
+ fields[i].num_bits = field_size;
fields[i].out_value = malloc(CEIL(field_size, 8));
buf_set_u32(fields[i].out_value, 0, field_size, strtoul(args[i*2+1], NULL, 0));
fields[i].in_value = NULL;
}
- jtag_add_ir_scan(argc / 2, fields, TAP_INVALID);
/* did we have an endstate? */
- if (endstate != TAP_INVALID)
- jtag_add_end_state(endstate);
+ jtag_add_ir_scan(num_fields, fields, endstate);
- jtag_execute_queue();
+ int retval=jtag_execute_queue();
- for (i = 0; i < argc / 2; i++)
+ for (i = 0; i < num_fields; i++)
free(fields[i].out_value);
free (fields);
- return ERROR_OK;
+ return retval;
}
static int Jim_Command_drscan(Jim_Interp *interp, int argc, Jim_Obj *const *args)
return JIM_ERR;
}
- /* assume no endstate */
- endstate = TAP_INVALID;
+ endstate = TAP_IDLE;
+
/* validate arguments as numbers */
e = JIM_OK;
for (i = 2; i < argc; i+=2)
return e;
}
- /* it could be: "-endstate FOO" */
+ /* it could be: "-endstate FOO"
+ * e.g. DRPAUSE so we can issue more instructions
+ * before entering RUN/IDLE and executing them.
+ */
/* get arg as a string. */
cp = Jim_GetString( args[i], NULL );
/* update the error message */
Jim_SetResult_sprintf(interp,"endstate: %s invalid", cp );
} else {
+ if (!scan_is_safe(endstate))
+ LOG_WARNING("drscan with unsafe "
+ "endstate \"%s\"", cp);
+
/* valid - so clear the error */
e = JIM_OK;
/* and remove the last 2 args */
}
} /* validate args */
- tap = jtag_TapByJimObj( interp, args[1] );
+ tap = jtag_tap_by_jim_obj( interp, args[1] );
if( tap == NULL ){
return JIM_ERR;
}
field_count++;
}
- jtag_add_dr_scan(num_fields, fields, TAP_INVALID);
- /* did we get an end state? */
- if (endstate != TAP_INVALID)
- jtag_add_end_state(endstate);
+ jtag_add_dr_scan(num_fields, fields, endstate);
retval = jtag_execute_queue();
if (retval != ERROR_OK)
static int Jim_Command_flush_count(Jim_Interp *interp, int argc, Jim_Obj *const *args)
{
- Jim_SetResult(interp, Jim_NewIntObj(interp, jtag_flush_queue_count));
+ Jim_SetResult(interp, Jim_NewIntObj(interp, jtag_get_flush_queue_count()));
return JIM_OK;
}
return ERROR_OK;
}
+void jtag_set_verify(bool enable)
+{
+ jtag_verify = enable;
+}
+
+bool jtag_will_verify()
+{
+ return jtag_verify;
+}
+
+static int handle_verify_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ if (argc == 1)
+ {
+ if (strcmp(args[0], "enable") == 0)
+ jtag_set_verify(true);
+ else if (strcmp(args[0], "disable") == 0)
+ jtag_set_verify(false);
+ else
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ const char *status = jtag_will_verify() ? "enabled": "disabled";
+ command_print(cmd_ctx, "verify jtag capture is %s", status);
+
+ return ERROR_OK;
+}
+
+
int jtag_power_dropout(int *dropout)
{
return jtag->power_dropout(dropout);
}
}
-/*-----<Cable Helper API>---------------------------------------*/
+static int handle_tms_sequence_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
-/* these Cable Helper API functions are all documented in the jtag.h header file,
- using a Doxygen format. And since Doxygen's configuration file "Doxyfile",
- is setup to prefer its docs in the header file, no documentation is here, for
- if it were, it would have to be doubly maintained.
-*/
+ if (argc == 1)
+ {
+ bool use_new_table;
+ if (strcmp(args[0], "short") == 0)
+ use_new_table = true;
+ else if (strcmp(args[0], "long") == 0)
+ use_new_table = false;
+ else
+ return ERROR_COMMAND_SYNTAX_ERROR;
-/**
- * @see tap_set_state() and tap_get_state() accessors.
- * Actual name is not important since accessors hide it.
- */
-static tap_state_t state_follower = TAP_RESET;
+ tap_use_new_tms_table(use_new_table);
+ }
-void tap_set_state_impl( tap_state_t new_state )
-{
- /* this is the state we think the TAPs are in now, was cur_state */
- state_follower = new_state;
-}
+ command_print(cmd_ctx, "tms sequence is %s",
+ tap_uses_new_tms_table() ? "short": "long");
-tap_state_t tap_get_state()
-{
- return state_follower;
+ return ERROR_OK;
}
/**
- * @see tap_set_end_state() and tap_get_end_state() accessors.
- * Actual name is not important because accessors hide it.
+ * Function jtag_add_statemove
+ * moves from the current state to the goal \a state. This needs
+ * to be handled according to the xsvf spec, see the XSTATE command
+ * description.
*/
-static tap_state_t end_state_follower = TAP_RESET;
-
-void tap_set_end_state( tap_state_t new_end_state )
-{
- /* this is the state we think the TAPs will be in at completion of the
- current TAP operation, was end_state
- */
- end_state_follower = new_end_state;
-}
-
-tap_state_t tap_get_end_state()
-{
- return end_state_follower;
-}
-
-
-int tap_move_ndx( tap_state_t astate )
+int jtag_add_statemove(tap_state_t goal_state)
{
- /* given a stable state, return the index into the tms_seqs[] array within tap_get_tms_path() */
-
- int ndx;
-
- switch( astate )
- {
- case TAP_RESET: ndx = 0; break;
- case TAP_DRSHIFT: ndx = 2; break;
- case TAP_DRPAUSE: ndx = 3; break;
- case TAP_IDLE: ndx = 1; break;
- case TAP_IRSHIFT: ndx = 4; break;
- case TAP_IRPAUSE: ndx = 5; break;
- default:
- LOG_ERROR( "fatal: unstable state \"%s\" used in tap_move_ndx()", tap_state_name(astate) );
- exit(1);
- }
+ int retval = ERROR_OK;
- return ndx;
-}
+ tap_state_t moves[8];
+ tap_state_t cur_state = cmd_queue_cur_state;
+ int i;
+ int tms_bits;
+ int tms_count;
+ LOG_DEBUG( "cur_state=%s goal_state=%s",
+ tap_state_name(cur_state),
+ tap_state_name(goal_state) );
-/* tap_move[i][j]: tap movement command to go from state i to state j
- * 0: Test-Logic-Reset
- * 1: Run-Test/Idle
- * 2: Shift-DR
- * 3: Pause-DR
- * 4: Shift-IR
- * 5: Pause-IR
- *
- * DRSHIFT->DRSHIFT and IRSHIFT->IRSHIFT have to be caught in interface specific code
- */
-static struct
-{
- u8 bits;
- u8 bit_count;
-} tms_seqs[6][6] = /* [from_state_ndx][to_state_ndx] */
-{
- /* value clocked to TMS to move from one of six stable states to another.
- * N.B. OOCD clocks TMS from LSB first, so read these right-to-left.
- * N.B. These values are tightly bound to the table in tap_get_tms_path_len().
- * N.B. Reset only needs to be 0b11111, but in JLink an even byte of 1's is more stable.
- * These extra ones cause no TAP state problem, because we go into reset and stay in reset.
- */
+ /* From the XSVF spec, pertaining to XSTATE:
-/*
- * These macros allow us to specify TMS state transitions by bits rather than hex bytes.
- * Read the bits from LSBit first to MSBit last (right-to-left).
- */
-#define HEX__(n) 0x##n##LU
-
-#define B8__(x) \
- (((x) & 0x0000000FLU)?(1<<0):0) \
- +(((x) & 0x000000F0LU)?(1<<1):0) \
- +(((x) & 0x00000F00LU)?(1<<2):0) \
- +(((x) & 0x0000F000LU)?(1<<3):0) \
- +(((x) & 0x000F0000LU)?(1<<4):0) \
- +(((x) & 0x00F00000LU)?(1<<5):0) \
- +(((x) & 0x0F000000LU)?(1<<6):0) \
- +(((x) & 0xF0000000LU)?(1<<7):0)
-
-#define B8(bits,count) { ((u8)B8__(HEX__(bits))), (count) }
-
-#if 0 && ((BUILD_FT2232_FTD2XX==1) || (BUILD_FT2232_LIBFTDI==1) || (BUILD_JLINK==1))
- /* this is the table submitted by Jeff Williams on 3/30/2009 with this comment:
-
- OK, I added Peter's version of the state table, and it works OK for
- me on MC1322x. I've recreated the jlink portion of patch with this
- new state table. His changes to my state table are pretty minor in
- terms of total transitions, but Peter feels that his version fixes
- some long-standing problems.
- Jeff
-
- I added the bit count into the table, reduced RESET column to 7 bits from 8.
- Dick
-
- state specific comments:
- ------------------------
- *->RESET tried the 5 bit reset and it gave me problems, 7 bits seems to
- work better on ARM9 with ft2232 driver. (Dick)
-
- RESET->DRSHIFT add 1 extra clock cycles in the RESET state before advancing.
- needed on ARM9 with ft2232 driver. (Dick)
-
- RESET->IRSHIFT add 1 extra clock cycles in the RESET state before advancing.
- needed on ARM9 with ft2232 driver. (Dick)
+ For special states known as stable states (Test-Logic-Reset,
+ Run-Test/Idle, Pause-DR, Pause- IR), an XSVF interpreter follows
+ predefined TAP state paths when the starting state is a stable state and
+ when the XSTATE specifies a new stable state (see the STATE command in
+ the [Ref 5] for the TAP state paths between stable states). For
+ non-stable states, XSTATE should specify a state that is only one TAP
+ state transition distance from the current TAP state to avoid undefined
+ TAP state paths. A sequence of multiple XSTATE commands can be issued to
+ transition the TAP through a specific state path.
*/
- /* to state: */
- /* RESET IDLE DRSHIFT DRPAUSE IRSHIFT IRPAUSE */ /* from state: */
- { B8(1111111,7), B8(0,1), B8(00101,5), B8(01010,5), B8(001101,6), B8(010110,6) }, /* RESET */
- { B8(1111111,7), B8(0,1), B8(001,3), B8(0101,4), B8(0011,4), B8(01011,5) }, /* IDLE */
- { B8(1111111,7), B8(011,3), B8(00111,5), B8(01,2), B8(001111,6), B8(0101111,7) }, /* DRSHIFT */
- { B8(1111111,7), B8(011,3), B8(01,2), B8(0,1), B8(001111,6), B8(0101111,7) }, /* DRPAUSE */
- { B8(1111111,7), B8(011,3), B8(00111,5), B8(010111,6), B8(001111,6), B8(01,2) }, /* IRSHIFT */
- { B8(1111111,7), B8(011,3), B8(00111,5), B8(010111,6), B8(01,2), B8(0,1) } /* IRPAUSE */
-
-#else /* this is the old table, converted from hex and with the bit_count set to 7 for each combo, like before */
-
- /* to state: */
- /* RESET IDLE DRSHIFT DRPAUSE IRSHIFT IRPAUSE */ /* from state: */
- { B8(1111111,7), B8(0000000,7), B8(0010111,7), B8(0001010,7), B8(0011011,7), B8(0010110,7) }, /* RESET */
- { B8(1111111,7), B8(0000000,7), B8(0100101,7), B8(0000101,7), B8(0101011,7), B8(0001011,7) }, /* IDLE */
- { B8(1111111,7), B8(0110001,7), B8(0000000,7), B8(0000001,7), B8(0001111,7), B8(0101111,7) }, /* DRSHIFT */
- { B8(1111111,7), B8(0110000,7), B8(0100000,7), B8(0010111,7), B8(0011110,7), B8(0101111,7) }, /* DRPAUSE */
- { B8(1111111,7), B8(0110001,7), B8(0000111,7), B8(0010111,7), B8(0000000,7), B8(0000001,7) }, /* IRSHIFT */
- { B8(1111111,7), B8(0110000,7), B8(0011100,7), B8(0010111,7), B8(0100000,7), B8(0101111,7) } /* IRPAUSE */
-
-#endif
-
-#if 0 /* keeping old hex stuff for awhile, for reference */
- /* RESET IDLE DRSHIFT DRPAUSE IRSHIFT IRPAUSE */
- { 0x7f, 0x00, 0x17, 0x0a, 0x1b, 0x16 }, /* RESET */
- { 0x7f, 0x00, 0x25, 0x05, 0x2b, 0x0b }, /* IDLE */
- { 0x7f, 0x31, 0x00, 0x01, 0x0f, 0x2f }, /* DRSHIFT */
- { 0x7f, 0x30, 0x20, 0x17, 0x1e, 0x2f }, /* DRPAUSE */
- { 0x7f, 0x31, 0x07, 0x17, 0x00, 0x01 }, /* IRSHIFT */
- { 0x7f, 0x30, 0x1c, 0x17, 0x20, 0x2f } /* IRPAUSE */
-#endif
-};
+ if (goal_state==cur_state )
+ ; /* nothing to do */
+ else if( goal_state==TAP_RESET )
+ {
+ jtag_add_tlr();
+ }
-int tap_get_tms_path( tap_state_t from, tap_state_t to )
-{
- return tms_seqs[tap_move_ndx(from)][tap_move_ndx(to)].bits;
-}
+ else if( tap_is_state_stable(cur_state) && tap_is_state_stable(goal_state) )
+ {
+ /* note: unless tms_bits holds a path that agrees with [Ref 5] in above
+ spec, then this code is not fully conformant to the xsvf spec. This
+ puts a burden on tap_get_tms_path() function from the xsvf spec.
+ If in doubt, you should confirm that that burden is being met.
+ */
+ tms_bits = tap_get_tms_path(cur_state, goal_state);
+ tms_count = tap_get_tms_path_len(cur_state, goal_state);
-int tap_get_tms_path_len( tap_state_t from, tap_state_t to )
-{
- return tms_seqs[tap_move_ndx(from)][tap_move_ndx(to)].bit_count;
-}
+ assert( (unsigned) tms_count < DIM(moves) );
+ for (i=0; i<tms_count; i++, tms_bits>>=1)
+ {
+ bool bit = tms_bits & 1;
-bool tap_is_state_stable(tap_state_t astate)
-{
- bool is_stable;
+ cur_state = tap_state_transition(cur_state, bit);
+ moves[i] = cur_state;
+ }
- /* A switch() is used because it is symbol dependent
- (not value dependent like an array), and can also check bounds.
- */
- switch( astate )
- {
- case TAP_RESET:
- case TAP_IDLE:
- case TAP_DRSHIFT:
- case TAP_DRPAUSE:
- case TAP_IRSHIFT:
- case TAP_IRPAUSE:
- is_stable = true;
- break;
- default:
- is_stable = false;
+ jtag_add_pathmove(tms_count, moves);
}
- return is_stable;
-}
-
-tap_state_t tap_state_transition(tap_state_t cur_state, bool tms)
-{
- tap_state_t new_state;
-
- /* A switch is used because it is symbol dependent and not value dependent
- like an array. Also it can check for out of range conditions.
+ /* else state must be immediately reachable in one clock cycle, and does not
+ need to be a stable state.
*/
-
- if (tms)
+ else if( tap_state_transition(cur_state, true) == goal_state
+ || tap_state_transition(cur_state, false) == goal_state )
{
- switch (cur_state)
- {
- case TAP_RESET:
- new_state = cur_state;
- break;
- case TAP_IDLE:
- case TAP_DRUPDATE:
- case TAP_IRUPDATE:
- new_state = TAP_DRSELECT;
- break;
- case TAP_DRSELECT:
- new_state = TAP_IRSELECT;
- break;
- case TAP_DRCAPTURE:
- case TAP_DRSHIFT:
- new_state = TAP_DREXIT1;
- break;
- case TAP_DREXIT1:
- case TAP_DREXIT2:
- new_state = TAP_DRUPDATE;
- break;
- case TAP_DRPAUSE:
- new_state = TAP_DREXIT2;
- break;
- case TAP_IRSELECT:
- new_state = TAP_RESET;
- break;
- case TAP_IRCAPTURE:
- case TAP_IRSHIFT:
- new_state = TAP_IREXIT1;
- break;
- case TAP_IREXIT1:
- case TAP_IREXIT2:
- new_state = TAP_IRUPDATE;
- break;
- case TAP_IRPAUSE:
- new_state = TAP_IREXIT2;
- break;
- default:
- LOG_ERROR( "fatal: invalid argument cur_state=%d", cur_state );
- exit(1);
- break;
- }
+ /* move a single state */
+ moves[0] = goal_state;
+ jtag_add_pathmove( 1, moves );
}
+
else
{
- switch (cur_state)
- {
- case TAP_RESET:
- case TAP_IDLE:
- case TAP_DRUPDATE:
- case TAP_IRUPDATE:
- new_state = TAP_IDLE;
- break;
- case TAP_DRSELECT:
- new_state = TAP_DRCAPTURE;
- break;
- case TAP_DRCAPTURE:
- case TAP_DRSHIFT:
- case TAP_DREXIT2:
- new_state = TAP_DRSHIFT;
- break;
- case TAP_DREXIT1:
- case TAP_DRPAUSE:
- new_state = TAP_DRPAUSE;
- break;
- case TAP_IRSELECT:
- new_state = TAP_IRCAPTURE;
- break;
- case TAP_IRCAPTURE:
- case TAP_IRSHIFT:
- case TAP_IREXIT2:
- new_state = TAP_IRSHIFT;
- break;
- case TAP_IREXIT1:
- case TAP_IRPAUSE:
- new_state = TAP_IRPAUSE;
- break;
- default:
- LOG_ERROR( "fatal: invalid argument cur_state=%d", cur_state );
- exit(1);
- break;
- }
+ retval = ERROR_FAIL;
}
- return new_state;
+ return retval;
}
-const char* tap_state_name(tap_state_t state)
+void jtag_set_nsrst_delay(unsigned delay)
{
- const char* ret;
-
- switch( state )
- {
- case TAP_RESET: ret = "RESET"; break;
- case TAP_IDLE: ret = "RUN/IDLE"; break;
- case TAP_DRSELECT: ret = "DRSELECT"; break;
- case TAP_DRCAPTURE: ret = "DRCAPTURE"; break;
- case TAP_DRSHIFT: ret = "DRSHIFT"; break;
- case TAP_DREXIT1: ret = "DREXIT1"; break;
- case TAP_DRPAUSE: ret = "DRPAUSE"; break;
- case TAP_DREXIT2: ret = "DREXIT2"; break;
- case TAP_DRUPDATE: ret = "DRUPDATE"; break;
- case TAP_IRSELECT: ret = "IRSELECT"; break;
- case TAP_IRCAPTURE: ret = "IRCAPTURE"; break;
- case TAP_IRSHIFT: ret = "IRSHIFT"; break;
- case TAP_IREXIT1: ret = "IREXIT1"; break;
- case TAP_IRPAUSE: ret = "IRPAUSE"; break;
- case TAP_IREXIT2: ret = "IREXIT2"; break;
- case TAP_IRUPDATE: ret = "IRUPDATE"; break;
- default: ret = "???";
- }
-
- return ret;
+ jtag_nsrst_delay = delay;
}
-
-static tap_state_t tap_state_by_name( const char *name )
+void jtag_set_ntrst_delay(unsigned delay)
{
- tap_state_t x;
-
- for( x = 0 ; x < TAP_NUM_STATES ; x++ ){
- /* be nice to the human */
- if( 0 == strcasecmp( name, tap_state_name(x) ) ){
- return x;
- }
- }
- /* not found */
- return TAP_INVALID;
+ jtag_ntrst_delay = delay;
}
-#ifdef _DEBUG_JTAG_IO_
-
-#define JTAG_DEBUG_STATE_APPEND(buf, len, bit) \
- do { buf[len] = bit ? '1' : '0'; } while(0)
-#define JTAG_DEBUG_STATE_PRINT(a, b, astr, bstr) \
- DEBUG_JTAG_IO("TAP/SM: %9s -> %5s\tTMS: %s\tTDI: %s", \
- tap_state_name(a), tap_state_name(b), astr, bstr)
-
-tap_state_t jtag_debug_state_machine(const void *tms_buf, const void *tdi_buf,
- unsigned tap_bits, tap_state_t next_state)
-{
- const u8 *tms_buffer;
- const u8 *tdi_buffer;
- unsigned tap_bytes;
- unsigned cur_byte;
- unsigned cur_bit;
-
- unsigned tap_out_bits;
- char tms_str[33];
- char tdi_str[33];
-
- tap_state_t last_state;
-
- // set startstate (and possibly last, if tap_bits == 0)
- last_state = next_state;
- DEBUG_JTAG_IO("TAP/SM: START state: %s", tap_state_name(next_state));
-
- tms_buffer = (const u8 *)tms_buf;
- tdi_buffer = (const u8 *)tdi_buf;
-
- tap_bytes = TAP_SCAN_BYTES(tap_bits);
- DEBUG_JTAG_IO("TAP/SM: TMS bits: %u (bytes: %u)", tap_bits, tap_bytes);
-
- tap_out_bits = 0;
- for(cur_byte = 0; cur_byte < tap_bytes; cur_byte++)
- {
- for(cur_bit = 0; cur_bit < 8; cur_bit++)
- {
- // make sure we do not run off the end of the buffers
- unsigned tap_bit = cur_byte * 8 + cur_bit;
- if (tap_bit == tap_bits)
- break;
-
- // check and save TMS bit
- tap_bit = !!(tms_buffer[cur_byte] & (1 << cur_bit));
- JTAG_DEBUG_STATE_APPEND(tms_str, tap_out_bits, tap_bit);
-
- // use TMS bit to find the next TAP state
- next_state = tap_state_transition(last_state, tap_bit);
-
- // check and store TDI bit
- tap_bit = !!(tdi_buffer[cur_byte] & (1 << cur_bit));
- JTAG_DEBUG_STATE_APPEND(tdi_str, tap_out_bits, tap_bit);
-
- // increment TAP bits
- tap_out_bits++;
-
- // Only show TDO bits on state transitions, or
- // after some number of bits in the same state.
- if ((next_state == last_state) && (tap_out_bits < 32))
- continue;
-
- // terminate strings and display state transition
- tms_str[tap_out_bits] = tdi_str[tap_out_bits] = 0;
- JTAG_DEBUG_STATE_PRINT(last_state, next_state, tms_str, tdi_str);
-
- // reset state
- last_state = next_state;
- tap_out_bits = 0;
- }
- }
-
- if (tap_out_bits)
- {
- // terminate strings and display state transition
- tms_str[tap_out_bits] = tdi_str[tap_out_bits] = 0;
- JTAG_DEBUG_STATE_PRINT(last_state, next_state, tms_str, tdi_str);
- }
-
- DEBUG_JTAG_IO("TAP/SM: FINAL state: %s", tap_state_name(next_state));
-
- return next_state;
-}
-#endif // _DEBUG_JTAG_IO_
-/*-----</Cable Helper API>--------------------------------------*/