-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * Copyright (C) 2007-2010 Øyvind Harboe *
- * oyvind.harboe@zylin.com *
- * *
- * Copyright (C) 2009 SoftPLC Corporation *
- * http://softplc.com *
- * dick@softplc.com *
- * *
- * Copyright (C) 2009 Zachary T Welch *
- * zw@superlucidity.net *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see <http://www.gnu.org/licenses/>. *
- ***************************************************************************/
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2005 by Dominic Rath <Dominic.Rath@gmx.de>
+ * Copyright (C) 2007-2010 Øyvind Harboe <oyvind.harboe@zylin.com>
+ * Copyright (C) 2009 SoftPLC Corporation, http://softplc.com, Dick Hollenbeck <dick@softplc.com>
+ * Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net>
+ * Copyright (C) 2018 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+ */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
+#include "adapter.h"
#include "jtag.h"
#include "minidriver.h"
#include "interface.h"
#include "interfaces.h"
#include <transport/transport.h>
-#include <jtag/drivers/jtag_usb_common.h>
#ifdef HAVE_STRINGS_H
#include <strings.h>
struct adapter_driver *adapter_driver;
const char * const jtag_only[] = { "jtag", NULL };
+enum adapter_clk_mode {
+ CLOCK_MODE_UNSELECTED = 0,
+ CLOCK_MODE_KHZ,
+ CLOCK_MODE_RCLK
+};
+
+/**
+ * Adapter configuration
+ */
+static struct {
+ bool adapter_initialized;
+ char *usb_location;
+ char *serial;
+ enum adapter_clk_mode clock_mode;
+ int speed_khz;
+ int rclk_fallback_speed_khz;
+} adapter_config;
+
+bool is_adapter_initialized(void)
+{
+ return adapter_config.adapter_initialized;
+}
+
+/**
+ * Do low-level setup like initializing registers, output signals,
+ * and clocking.
+ */
+int adapter_init(struct command_context *cmd_ctx)
+{
+ if (is_adapter_initialized())
+ return ERROR_OK;
+
+ if (!adapter_driver) {
+ /* nothing was previously specified by "adapter driver" command */
+ LOG_ERROR("Debug Adapter has to be specified, "
+ "see \"adapter driver\" command");
+ return ERROR_JTAG_INVALID_INTERFACE;
+ }
+
+ int retval;
+ retval = adapter_driver->init();
+ if (retval != ERROR_OK)
+ return retval;
+ adapter_config.adapter_initialized = true;
+
+ if (!adapter_driver->speed) {
+ LOG_INFO("This adapter doesn't support configurable speed");
+ return ERROR_OK;
+ }
+
+ if (adapter_config.clock_mode == CLOCK_MODE_UNSELECTED) {
+ LOG_ERROR("An adapter speed is not selected in the init script."
+ " Insert a call to \"adapter speed\" or \"jtag_rclk\" to proceed.");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ int requested_khz = adapter_get_speed_khz();
+ int actual_khz = requested_khz;
+ int speed_var = 0;
+ retval = adapter_get_speed(&speed_var);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = adapter_driver->speed(speed_var);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = adapter_get_speed_readable(&actual_khz);
+ if (retval != ERROR_OK)
+ LOG_INFO("adapter-specific clock speed value %d", speed_var);
+ else if (actual_khz) {
+ /* Adaptive clocking -- JTAG-specific */
+ if ((adapter_config.clock_mode == CLOCK_MODE_RCLK)
+ || ((adapter_config.clock_mode == CLOCK_MODE_KHZ) && !requested_khz)) {
+ LOG_INFO("RCLK (adaptive clock speed) not supported - fallback to %d kHz"
+ , actual_khz);
+ } else
+ LOG_INFO("clock speed %d kHz", actual_khz);
+ } else
+ LOG_INFO("RCLK (adaptive clock speed)");
+
+ return ERROR_OK;
+}
+
+int adapter_quit(void)
+{
+ if (is_adapter_initialized() && adapter_driver->quit) {
+ /* close the JTAG interface */
+ int result = adapter_driver->quit();
+ if (result != ERROR_OK)
+ LOG_ERROR("failed: %d", result);
+ }
+
+ free(adapter_config.serial);
+ free(adapter_config.usb_location);
+
+ struct jtag_tap *t = jtag_all_taps();
+ while (t) {
+ struct jtag_tap *n = t->next_tap;
+ jtag_tap_free(t);
+ t = n;
+ }
+
+ return ERROR_OK;
+}
+
+unsigned int adapter_get_speed_khz(void)
+{
+ return adapter_config.speed_khz;
+}
+
+static int adapter_khz_to_speed(unsigned int khz, int *speed)
+{
+ LOG_DEBUG("convert khz to adapter specific speed value");
+ adapter_config.speed_khz = khz;
+ if (!is_adapter_initialized())
+ return ERROR_OK;
+ LOG_DEBUG("have adapter set up");
+ if (!adapter_driver->khz) {
+ LOG_ERROR("Translation from khz to adapter speed not implemented");
+ return ERROR_FAIL;
+ }
+ int speed_div1;
+ int retval = adapter_driver->khz(adapter_get_speed_khz(), &speed_div1);
+ if (retval != ERROR_OK)
+ return retval;
+ *speed = speed_div1;
+ return ERROR_OK;
+}
+
+static int adapter_rclk_to_speed(unsigned int fallback_speed_khz, int *speed)
+{
+ int retval = adapter_khz_to_speed(0, speed);
+ if ((retval != ERROR_OK) && fallback_speed_khz) {
+ LOG_DEBUG("trying fallback speed...");
+ retval = adapter_khz_to_speed(fallback_speed_khz, speed);
+ }
+ return retval;
+}
+
+static int adapter_set_speed(int speed)
+{
+ /* this command can be called during CONFIG,
+ * in which case adapter isn't initialized */
+ return is_adapter_initialized() ? adapter_driver->speed(speed) : ERROR_OK;
+}
+
+int adapter_config_khz(unsigned int khz)
+{
+ LOG_DEBUG("handle adapter khz");
+ adapter_config.clock_mode = CLOCK_MODE_KHZ;
+ int speed = 0;
+ int retval = adapter_khz_to_speed(khz, &speed);
+ return (retval != ERROR_OK) ? retval : adapter_set_speed(speed);
+}
+
+int adapter_config_rclk(unsigned int fallback_speed_khz)
+{
+ LOG_DEBUG("handle adapter rclk");
+ adapter_config.clock_mode = CLOCK_MODE_RCLK;
+ adapter_config.rclk_fallback_speed_khz = fallback_speed_khz;
+ int speed = 0;
+ int retval = adapter_rclk_to_speed(fallback_speed_khz, &speed);
+ return (retval != ERROR_OK) ? retval : adapter_set_speed(speed);
+}
+
+int adapter_get_speed(int *speed)
+{
+ switch (adapter_config.clock_mode) {
+ case CLOCK_MODE_KHZ:
+ adapter_khz_to_speed(adapter_get_speed_khz(), speed);
+ break;
+ case CLOCK_MODE_RCLK:
+ adapter_rclk_to_speed(adapter_config.rclk_fallback_speed_khz, speed);
+ break;
+ default:
+ LOG_ERROR("BUG: unknown adapter clock mode");
+ return ERROR_FAIL;
+ }
+ return ERROR_OK;
+}
+
+int adapter_get_speed_readable(int *khz)
+{
+ int speed_var = 0;
+ int retval = adapter_get_speed(&speed_var);
+ if (retval != ERROR_OK)
+ return retval;
+ if (!is_adapter_initialized())
+ return ERROR_OK;
+ if (!adapter_driver->speed_div) {
+ LOG_ERROR("Translation from adapter speed to khz not implemented");
+ return ERROR_FAIL;
+ }
+ return adapter_driver->speed_div(speed_var, khz);
+}
+
+const char *adapter_get_required_serial(void)
+{
+ return adapter_config.serial;
+}
+
+/*
+ * 1 char: bus
+ * 2 * 7 chars: max 7 ports
+ * 1 char: test for overflow
+ * ------
+ * 16 chars
+ */
+#define USB_MAX_LOCATION_LENGTH 16
+
+#ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
+static void adapter_usb_set_location(const char *location)
+{
+ if (strnlen(location, USB_MAX_LOCATION_LENGTH) == USB_MAX_LOCATION_LENGTH)
+ LOG_WARNING("usb location string is too long!!");
+
+ free(adapter_config.usb_location);
+
+ adapter_config.usb_location = strndup(location, USB_MAX_LOCATION_LENGTH);
+}
+#endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
+
+const char *adapter_usb_get_location(void)
+{
+ return adapter_config.usb_location;
+}
+
+bool adapter_usb_location_equal(uint8_t dev_bus, uint8_t *port_path, size_t path_len)
+{
+ size_t path_step, string_length;
+ char *ptr, *loc;
+ bool equal = false;
+
+ if (!adapter_usb_get_location())
+ return equal;
+
+ /* strtok need non const char */
+ loc = strndup(adapter_usb_get_location(), USB_MAX_LOCATION_LENGTH);
+ string_length = strnlen(loc, USB_MAX_LOCATION_LENGTH);
+
+ ptr = strtok(loc, "-");
+ if (!ptr) {
+ LOG_WARNING("no '-' in usb path\n");
+ goto done;
+ }
+
+ string_length -= strnlen(ptr, string_length);
+ /* check bus mismatch */
+ if (atoi(ptr) != dev_bus)
+ goto done;
+
+ path_step = 0;
+ while (path_step < path_len) {
+ ptr = strtok(NULL, ".");
+
+ /* no more tokens in path */
+ if (!ptr)
+ break;
+
+ /* path mismatch at some step */
+ if (path_step < path_len && atoi(ptr) != port_path[path_step])
+ break;
+
+ path_step++;
+ string_length -= strnlen(ptr, string_length) + 1;
+ };
+
+ /* walked the full path, all elements match */
+ if (path_step == path_len && !string_length)
+ equal = true;
+
+done:
+ free(loc);
+ return equal;
+}
+
static int jim_adapter_name(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
{
- Jim_GetOptInfo goi;
- Jim_GetOpt_Setup(&goi, interp, argc-1, argv + 1);
+ struct jim_getopt_info goi;
+ jim_getopt_setup(&goi, interp, argc-1, argv + 1);
/* return the name of the interface */
/* TCL code might need to know the exact type... */
return JIM_ERR;
}
const char *name = adapter_driver ? adapter_driver->name : NULL;
- Jim_SetResultString(goi.interp, name ? : "undefined", -1);
+ Jim_SetResultString(goi.interp, name ? name : "undefined", -1);
return JIM_OK;
}
return ERROR_COMMAND_SYNTAX_ERROR;
command_print(CMD, "The following debug adapters are available:");
- for (unsigned i = 0; NULL != adapter_drivers[i]; i++) {
+ for (unsigned i = 0; adapter_drivers[i]; i++) {
const char *name = adapter_drivers[i]->name;
command_print(CMD, "%u: %s", i + 1, name);
}
if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
return ERROR_COMMAND_SYNTAX_ERROR;
- for (unsigned i = 0; NULL != adapter_drivers[i]; i++) {
+ for (unsigned i = 0; adapter_drivers[i]; i++) {
if (strcmp(CMD_ARGV[0], adapter_drivers[i]->name) != 0)
continue;
- if (NULL != adapter_drivers[i]->commands) {
- retval = register_commands(CMD_CTX, NULL,
- adapter_drivers[i]->commands);
- if (ERROR_OK != retval)
+ if (adapter_drivers[i]->commands) {
+ retval = register_commands(CMD_CTX, NULL, adapter_drivers[i]->commands);
+ if (retval != ERROR_OK)
return retval;
}
unsigned khz = 0;
COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
- retval = jtag_config_khz(khz);
- if (ERROR_OK != retval)
+ retval = adapter_config_khz(khz);
+ if (retval != ERROR_OK)
return retval;
}
- int cur_speed = jtag_get_speed_khz();
- retval = jtag_get_speed_readable(&cur_speed);
- if (ERROR_OK != retval)
+ int cur_speed = adapter_get_speed_khz();
+ retval = adapter_get_speed_readable(&cur_speed);
+ if (retval != ERROR_OK)
return retval;
if (cur_speed)
return retval;
}
+COMMAND_HANDLER(handle_adapter_serial_command)
+{
+ if (CMD_ARGC != 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ free(adapter_config.serial);
+ adapter_config.serial = strdup(CMD_ARGV[0]);
+ return ERROR_OK;
+}
+
COMMAND_HANDLER(handle_adapter_reset_de_assert)
{
enum values {
(srst == VALUE_DEASSERT) ? SRST_DEASSERT : SRST_ASSERT);
}
-#ifndef HAVE_JTAG_MINIDRIVER_H
#ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
COMMAND_HANDLER(handle_usb_location_command)
{
if (CMD_ARGC == 1)
- jtag_usb_set_location(CMD_ARGV[0]);
+ adapter_usb_set_location(CMD_ARGV[0]);
- command_print(CMD, "adapter usb location: %s", jtag_usb_get_location());
+ command_print(CMD, "adapter usb location: %s", adapter_usb_get_location());
return ERROR_OK;
}
#endif /* HAVE_LIBUSB_GET_PORT_NUMBERS */
COMMAND_REGISTRATION_DONE
};
-#endif /* MINIDRIVER */
static const struct command_registration adapter_srst_command_handlers[] = {
{
"With or without argument, display current setting.",
.usage = "[khz]",
},
+ {
+ .name = "serial",
+ .handler = handle_adapter_serial_command,
+ .mode = COMMAND_CONFIG,
+ .help = "Set the serial number of the adapter",
+ .usage = "serial_string",
+ },
{
.name = "list",
.handler = handle_adapter_list_command,
.handler = adapter_transports_command,
.mode = COMMAND_CONFIG,
.help = "Declare transports the adapter supports.",
- .usage = "transport ... ",
+ .usage = "transport ...",
},
-#ifndef HAVE_JTAG_MINIDRIVER_H
{
.name = "usb",
.mode = COMMAND_ANY,
.usage = "",
.chain = adapter_usb_command_handlers,
},
-#endif /* MINIDRIVER */
{
.name = "assert",
.handler = handle_adapter_reset_de_assert,
* @todo Remove internal assumptions that all debug adapters use JTAG for
* transport. Various types and data structures are not named generically.
*/
-int interface_register_commands(struct command_context *ctx)
+int adapter_register_commands(struct command_context *ctx)
{
return register_commands(ctx, NULL, interface_command_handlers);
}