* Copyright (C) 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
- * partially based on *
- * drivers/mtd/nand_ids.c *
- * *
- * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) *
+ * Partially based on drivers/mtd/nand_ids.c from Linux. *
+ * Copyright (C) 2002 Thomas Gleixner <tglx@linutronix.de> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
if (argc < 1)
{
- WARNING("incomplete flash device nand configuration");
+ LOG_WARNING("incomplete flash device nand configuration");
return ERROR_FLASH_BANK_INVALID;
}
if (strcmp(args[0], nand_flash_controllers[i]->name) == 0)
{
/* register flash specific commands */
- if (nand_flash_controllers[i]->register_commands(cmd_ctx) != ERROR_OK)
+ if ((retval = nand_flash_controllers[i]->register_commands(cmd_ctx)) != ERROR_OK)
{
- ERROR("couldn't register '%s' commands", args[0]);
- exit(-1);
+ LOG_ERROR("couldn't register '%s' commands", args[0]);
+ return retval;
}
c = malloc(sizeof(nand_device_t));
if ((retval = nand_flash_controllers[i]->nand_device_command(cmd_ctx, cmd, args, argc, c)) != ERROR_OK)
{
- ERROR("'%s' driver rejected nand flash", c->controller->name);
+ LOG_ERROR("'%s' driver rejected nand flash", c->controller->name);
free(c);
return ERROR_OK;
}
/* no valid NAND controller was found (i.e. the configuration option,
* didn't match one of the compiled-in controllers)
*/
- ERROR("No valid NAND flash controller found (%s)", args[0]);
- ERROR("compiled-in NAND flash controllers:");
+ LOG_ERROR("No valid NAND flash controller found (%s)", args[0]);
+ LOG_ERROR("compiled-in NAND flash controllers:");
for (i = 0; nand_flash_controllers[i]; i++)
{
- ERROR("%i: %s", i, nand_flash_controllers[i]->name);
+ LOG_ERROR("%i: %s", i, nand_flash_controllers[i]->name);
}
return ERROR_OK;
register_command(cmd_ctx, nand_cmd, "dump", handle_nand_dump_command, COMMAND_EXEC,
"dump from NAND flash device <num> <filename> <offset> <size> [options]");
register_command(cmd_ctx, nand_cmd, "write", handle_nand_write_command, COMMAND_EXEC,
- "write to NAND flash device <num> <filename> <offset> [options]");
+ "write to NAND flash device <num> <filename> <offset> [oob_raw|oob_only]");
register_command(cmd_ctx, nand_cmd, "raw_access", handle_nand_raw_access_command, COMMAND_EXEC,
"raw access to NAND flash device <num> ['enable'|'disable']");
}
|| (((device->page_size == 512) && (oob[5] != 0xff)) ||
((device->page_size == 2048) && (oob[0] != 0xff))))
{
- WARNING("invalid block: %i", i);
+ LOG_WARNING("invalid block: %i", i);
device->blocks[i].is_bad = 1;
}
else
/* Send read status command */
device->controller->command(device, NAND_CMD_STATUS);
- usleep(1000);
+ alive_sleep(1);
/* read status */
if (device->device->options & NAND_BUSWIDTH_16)
int nand_probe(struct nand_device_s *device)
{
u8 manufacturer_id, device_id;
+ u8 id_buff[6];
int retval;
int i;
switch (retval)
{
case ERROR_NAND_OPERATION_FAILED:
- DEBUG("controller initialization failed");
+ LOG_DEBUG("controller initialization failed");
return ERROR_NAND_OPERATION_FAILED;
case ERROR_NAND_OPERATION_NOT_SUPPORTED:
- ERROR("BUG: controller reported that it doesn't support default parameters");
+ LOG_ERROR("BUG: controller reported that it doesn't support default parameters");
return ERROR_NAND_OPERATION_FAILED;
default:
- ERROR("BUG: unknown controller initialization failure");
+ LOG_ERROR("BUG: unknown controller initialization failure");
return ERROR_NAND_OPERATION_FAILED;
}
}
if (!device->device)
{
- ERROR("unknown NAND flash device found, manufacturer id: 0x%2.2x device id: 0x%2.2x",
+ LOG_ERROR("unknown NAND flash device found, manufacturer id: 0x%2.2x device id: 0x%2.2x",
manufacturer_id, device_id);
return ERROR_NAND_OPERATION_FAILED;
}
- DEBUG("found %s (%s)", device->device->name, device->manufacturer->name);
+ LOG_DEBUG("found %s (%s)", device->device->name, device->manufacturer->name);
/* initialize device parameters */
device->bus_width = 16;
else
device->bus_width = 8;
+
+ /* Do we need extended device probe information? */
+ if (device->device->page_size == 0 ||
+ device->device->erase_size == 0)
+ {
+ if (device->bus_width == 8)
+ {
+ device->controller->read_data(device, id_buff+3);
+ device->controller->read_data(device, id_buff+4);
+ device->controller->read_data(device, id_buff+5);
+ }
+ else
+ {
+ u16 data_buf;
+
+ device->controller->read_data(device, &data_buf);
+ id_buff[3] = data_buf;
+
+ device->controller->read_data(device, &data_buf);
+ id_buff[4] = data_buf;
+
+ device->controller->read_data(device, &data_buf);
+ id_buff[5] = data_buf >> 8;
+ }
+ }
/* page size */
if (device->device->page_size == 0)
{
- /* TODO: support reading extended chip id to determine page size */
- return ERROR_NAND_OPERATION_FAILED;
+ device->page_size = 1 << (10 + (id_buff[4] & 3));
}
else if (device->device->page_size == 256)
{
- ERROR("NAND flashes with 256 byte pagesize are not supported");
+ LOG_ERROR("NAND flashes with 256 byte pagesize are not supported");
return ERROR_NAND_OPERATION_FAILED;
}
else
device->address_cycles = 4;
else
{
- ERROR("BUG: small page NAND device with more than 8 GiB encountered");
+ LOG_ERROR("BUG: small page NAND device with more than 8 GiB encountered");
device->address_cycles = 5;
}
}
device->address_cycles = 5;
else
{
- ERROR("BUG: small page NAND device with more than 32 GiB encountered");
+ LOG_ERROR("BUG: large page NAND device with more than 32 GiB encountered");
device->address_cycles = 6;
}
}
/* erase size */
if (device->device->erase_size == 0)
{
- /* TODO: support reading extended chip id to determine erase size */
+ switch ((id_buff[4] >> 4) & 3) {
+ case 0:
+ device->erase_size = 64 << 10;
+ break;
+ case 1:
+ device->erase_size = 128 << 10;
+ break;
+ case 2:
+ device->erase_size = 256 << 10;
+ break;
+ case 3:
+ device->erase_size =512 << 10;
+ break;
+ }
}
else
{
switch (retval)
{
case ERROR_NAND_OPERATION_FAILED:
- DEBUG("controller initialization failed");
+ LOG_DEBUG("controller initialization failed");
return ERROR_NAND_OPERATION_FAILED;
case ERROR_NAND_OPERATION_NOT_SUPPORTED:
- ERROR("controller doesn't support requested parameters (buswidth: %i, address cycles: %i, page size: %i)",
+ LOG_ERROR("controller doesn't support requested parameters (buswidth: %i, address cycles: %i, page size: %i)",
device->bus_width, device->address_cycles, device->page_size);
return ERROR_NAND_OPERATION_FAILED;
default:
- ERROR("BUG: unknown controller initialization failure");
+ LOG_ERROR("BUG: unknown controller initialization failure");
return ERROR_NAND_OPERATION_FAILED;
}
}
if (!device->controller->nand_ready(device, 1000))
{
- ERROR("timeout waiting for NAND flash block erase to complete");
+ LOG_ERROR("timeout waiting for NAND flash block erase to complete");
return ERROR_NAND_OPERATION_TIMEOUT;
}
if ((retval = nand_read_status(device, &status)) != ERROR_OK)
{
- ERROR("couldn't read status");
+ LOG_ERROR("couldn't read status");
return ERROR_NAND_OPERATION_FAILED;
}
if (status & 0x1)
{
- ERROR("erase operation didn't pass, status: 0x%2.2x", status);
+ LOG_ERROR("erase operation didn't pass, status: 0x%2.2x", status);
return ERROR_NAND_OPERATION_FAILED;
}
}
if (address % device->page_size)
{
- ERROR("reads need to be page aligned");
+ LOG_ERROR("reads need to be page aligned");
return ERROR_NAND_OPERATION_FAILED;
}
if (address % device->page_size)
{
- ERROR("writes need to be page aligned");
+ LOG_ERROR("writes need to be page aligned");
return ERROR_NAND_OPERATION_FAILED;
}
* or 2048 for the beginning of OOB area)
*/
device->controller->address(device, 0x0);
- device->controller->address(device, 0x8);
+ if (data)
+ device->controller->address(device, 0x0);
+ else
+ device->controller->address(device, 0x8);
/* row */
device->controller->address(device, page & 0xff);
* or 2048 for the beginning of OOB area)
*/
device->controller->address(device, 0x0);
- device->controller->address(device, 0x8);
+ if (data)
+ device->controller->address(device, 0x0);
+ else
+ device->controller->address(device, 0x8);
/* row */
device->controller->address(device, page & 0xff);
if ((retval = nand_read_status(device, &status)) != ERROR_OK)
{
- ERROR("couldn't read status");
+ LOG_ERROR("couldn't read status");
return ERROR_NAND_OPERATION_FAILED;
}
if (status & NAND_STATUS_FAIL)
{
- ERROR("write operation didn't pass, status: 0x%2.2x", status);
+ LOG_ERROR("write operation didn't pass, status: 0x%2.2x", status);
return ERROR_NAND_OPERATION_FAILED;
}
if ((argc < 1) || (argc > 3))
{
- command_print(cmd_ctx, "usage: nand info <num> [<first> <last>]");
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
}
if (argc == 2)
if (argc != 1)
{
- command_print(cmd_ctx, "usage: nand probe <num>");
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
if (argc != 3)
{
- command_print(cmd_ctx, "usage: nand erase <num> <first> <last>");
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
}
p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
if ((argc < 1) || (argc > 3) || (argc == 2))
{
- command_print(cmd_ctx, "usage: nand check_bad_blocks <num> [<first> <last>]");
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
}
if (argc == 3)
if (argc != 4)
{
- command_print(cmd_ctx, "usage: nand copy <num> <offset> <length> <ram-address>");
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
}
p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
if (argc < 3)
{
- command_print(cmd_ctx, "usage: nand write <num> <file> <offset> [options]");
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
}
p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
u8 *oob = NULL;
u32 oob_size = 0;
- duration_start_measure(&duration);
offset = strtoul(args[2], NULL, 0);
if (argc > 3)
else
{
command_print(cmd_ctx, "unknown option: %s", args[i]);
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
}
}
+ duration_start_measure(&duration);
+
if (fileio_open(&fileio, args[1], FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
{
- command_print(cmd_ctx, "file open error: %s", fileio.error_str);
return ERROR_OK;
}
if (offset % p->page_size)
{
command_print(cmd_ctx, "only page size aligned offsets and sizes are supported");
+ fileio_close(&fileio);
+ free(oob);
+ free(page);
return ERROR_OK;
}
{
u32 size_read;
- if (page)
+ if (NULL != page)
{
fileio_read(&fileio, page_size, page, &size_read);
buf_cnt -= size_read;
}
}
- if (oob)
+ if (NULL != oob)
{
fileio_read(&fileio, oob_size, oob, &size_read);
buf_cnt -= size_read;
{
command_print(cmd_ctx, "failed writing file %s to NAND flash %s at offset 0x%8.8x",
args[1], args[0], offset);
+
+ fileio_close(&fileio);
+ free(oob);
+ free(page);
+
return ERROR_OK;
}
offset += page_size;
}
fileio_close(&fileio);
-
+ free(oob);
+ free(page);
+ oob = NULL;
+ page = NULL;
duration_stop_measure(&duration, &duration_text);
- command_print(cmd_ctx, "wrote file %s to NAND flash %s at offset 0x%8.8x in %s",
+ command_print(cmd_ctx, "wrote file %s to NAND flash %s up to offset 0x%8.8x in %s",
args[1], args[0], offset, duration_text);
free(duration_text);
+ duration_text = NULL;
}
else
{
if (argc < 4)
{
- command_print(cmd_ctx, "usage: nand dump <num> <filename> <address> <size> [options]");
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
if (fileio_open(&fileio, args[1], FILEIO_WRITE, FILEIO_BINARY) != ERROR_OK)
{
- command_print(cmd_ctx, "dump_image error: %s", fileio.error_str);
return ERROR_OK;
}
if ((retval = nand_read_page(p, address / p->page_size, page, page_size, oob, oob_size)) != ERROR_OK)
{
command_print(cmd_ctx, "reading NAND flash page failed");
+ free(page);
+ free(oob);
+ fileio_close(&fileio);
return ERROR_OK;
}
- if (page)
+ if (NULL != page)
{
fileio_write(&fileio, page_size, page, &size_written);
bytes_done += page_size;
}
- if (oob)
+ if (NULL != oob)
{
fileio_write(&fileio, oob_size, oob, &size_written);
bytes_done += oob_size;
address += p->page_size;
}
- if (page)
- free(page);
-
- if (oob)
- free(oob);
-
+ free(page);
+ page = NULL;
+ free(oob);
+ oob = NULL;
fileio_close(&fileio);
duration_stop_measure(&duration, &duration_text);
command_print(cmd_ctx, "dumped %"PRIi64" byte in %s", fileio.size, duration_text);
free(duration_text);
+ duration_text = NULL;
}
else
{
if ((argc < 1) || (argc > 2))
{
- command_print(cmd_ctx, "usage: nand raw_access <num> ['enable'|'disable']");
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
}
else
{
- command_print(cmd_ctx, "usage: nand raw_access ['enable'|disable']");
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
}
return ERROR_OK;
}
-
Code Review / openocd.git / blobdiff