#endif
#include "arm_nandio.h"
-#include "armv4_5.h"
-#include "algorithm.h"
+#include <target/armv4_5.h>
+#include <target/algorithm.h>
+/**
+ * Copies code to a working area. This will allocate room for the code plus the
+ * additional amount requested if the working area pointer is null.
+ *
+ * @param target Pointer to the target to copy code to
+ * @param code Pointer to the code area to be copied
+ * @param code_size Size of the code being copied
+ * @param additional Size of the additional area to be allocated in addition to
+ * code
+ * @param area Pointer to a pointer to a working area to copy code to
+ * @return Success or failure of the operation
+ */
+int arm_code_to_working_area(struct target *target, const uint32_t *code, unsigned code_size,
+ unsigned additional, struct working_area **area)
+{
+ uint8_t code_buf[code_size];
+ unsigned i;
+ int retval;
+ unsigned size = code_size + additional;
+
+ /* make sure we have a working area */
+ if (NULL == *area) {
+ retval = target_alloc_working_area(target, size, area);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("%s: no %d byte buffer", __FUNCTION__, (int) size);
+ return ERROR_NAND_NO_BUFFER;
+ }
+ }
-/*
+ /* buffer code in target endianness */
+ for (i = 0; i < code_size / 4; i++)
+ target_buffer_set_u32(target, code_buf + i * 4, code[i]);
+
+ /* copy code to work area */
+ retval = target_write_memory(target, (*area)->address,
+ 4, code_size / 4, code_buf);
+
+ return retval;
+}
+
+/**
* ARM-specific bulk write from buffer to address of 8-bit wide NAND.
* For now this only supports ARMv4 and ARMv5 cores.
*
* Different code fragments could handle:
* - Thumb2 cores like Cortex-M (needs different byteswapping)
* - 16-bit wide data (needs different setup too)
+ *
+ * @param nand Pointer to the arm_nand_data struct that defines the I/O
+ * @param data Pointer to the data to be copied to flash
+ * @param size Size of the data being copied
+ * @return Success or failure of the operation
*/
int arm_nandwrite(struct arm_nand_data *nand, uint8_t *data, int size)
{
};
if (!nand->copy_area) {
- uint8_t code_buf[sizeof(code)];
- unsigned i;
-
- /* make sure we have a working area */
- if (target_alloc_working_area(target,
- sizeof(code) + nand->chunk_size,
- &nand->copy_area) != ERROR_OK) {
- LOG_DEBUG("%s: no %d byte buffer",
- __FUNCTION__,
- (int) sizeof(code) + nand->chunk_size);
- return ERROR_NAND_NO_BUFFER;
- }
-
- /* buffer code in target endianness */
- for (i = 0; i < sizeof(code) / 4; i++)
- target_buffer_set_u32(target, code_buf + i * 4, code[i]);
-
- /* copy code to work area */
- retval = target_write_memory(target,
- nand->copy_area->address,
- 4, sizeof(code) / 4, code_buf);
- if (retval != ERROR_OK)
+ retval = arm_code_to_working_area(target, code, sizeof(code),
+ nand->chunk_size, &nand->copy_area);
+ if (retval != ERROR_OK) {
return retval;
+ }
}
/* copy data to work area */
return retval;
}
-/* REVISIT do the same for bulk *read* too ... */
+/**
+ * Uses an on-chip algorithm for an ARM device to read from a NAND device and
+ * store the data into the host machine's memory.
+ *
+ * @param nand Pointer to the arm_nand_data struct that defines the I/O
+ * @param data Pointer to the data buffer to store the read data
+ * @param size Amount of data to be stored to the buffer.
+ * @return Success or failure of the operation
+ */
+int arm_nandread(struct arm_nand_data *nand, uint8_t *data, uint32_t size)
+{
+ struct target *target = nand->target;
+ struct armv4_5_algorithm algo;
+ struct arm *armv4_5 = target->arch_info;
+ struct reg_param reg_params[3];
+ uint32_t target_buf;
+ uint32_t exit = 0;
+ int retval;
+
+ /* Inputs:
+ * r0 buffer address
+ * r1 NAND data address (byte wide)
+ * r2 buffer length
+ */
+ static const uint32_t code[] = {
+ 0xe5d13000, /* s: ldrb r3, [r1] */
+ 0xe4c03001, /* strb r3, [r0], #1 */
+ 0xe2522001, /* subs r2, r2, #1 */
+ 0x1afffffb, /* bne s */
+
+ /* exit: ARMv4 needs hardware breakpoint */
+ 0xe1200070, /* e: bkpt #0 */
+ };
+
+ /* create the copy area if not yet available */
+ if (!nand->copy_area) {
+ retval = arm_code_to_working_area(target, code, sizeof(code),
+ nand->chunk_size, &nand->copy_area);
+ if (retval != ERROR_OK) {
+ return retval;
+ }
+ }
+
+ target_buf = nand->copy_area->address + sizeof(code);
+
+ /* set up algorithm and parameters */
+ algo.common_magic = ARMV4_5_COMMON_MAGIC;
+ algo.core_mode = ARMV4_5_MODE_SVC;
+ algo.core_state = ARMV4_5_STATE_ARM;
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN);
+ init_reg_param(®_params[1], "r1", 32, PARAM_IN);
+ init_reg_param(®_params[2], "r2", 32, PARAM_IN);
+
+ buf_set_u32(reg_params[0].value, 0, 32, target_buf);
+ buf_set_u32(reg_params[1].value, 0, 32, nand->data);
+ buf_set_u32(reg_params[2].value, 0, 32, size);
+
+ /* armv4 must exit using a hardware breakpoint */
+ if (armv4_5->is_armv4)
+ exit = nand->copy_area->address + sizeof(code) - 4;
+
+ /* use alg to write data from NAND chip to work area */
+ retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
+ nand->copy_area->address, exit, 1000, &algo);
+ if (retval != ERROR_OK)
+ LOG_ERROR("error executing hosted NAND write");
+
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+
+ /* read from work area to the host's memory */
+ retval = target_read_buffer(target, target_buf, size, data);
+
+ return retval;
+}