1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2007,2008 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
30 #include "breakpoints.h"
31 #include "algorithm.h"
41 struct command_context_s
;
43 * TARGET_UNKNOWN = 0: we don't know anything about the target yet
44 * TARGET_RUNNING = 1: the target is executing user code
45 * TARGET_HALTED = 2: the target is not executing code, and ready to talk to the
46 * debugger. on an xscale it means that the debug handler is executing
47 * TARGET_RESET = 3: the target is being held in reset (only a temporary state,
48 * not sure how this is used with all the recent changes)
49 * TARGET_DEBUG_RUNNING = 4: the target is running, but it is executing code on
50 * behalf of the debugger (e.g. algorithm for flashing) */
58 TARGET_DEBUG_RUNNING
= 4,
61 extern const Jim_Nvp nvp_target_state
[];
68 extern const Jim_Nvp nvp_assert
[];
70 enum target_reset_mode
73 RESET_RUN
= 1, /* reset and let target run */
74 RESET_HALT
= 2, /* reset and halt target out of reset */
75 RESET_INIT
= 3, /* reset and halt target out of reset, then run init script */
78 extern const Jim_Nvp nvp_reset_mode
[];
80 enum target_debug_reason
83 DBG_REASON_BREAKPOINT
= 1,
84 DBG_REASON_WATCHPOINT
= 2,
85 DBG_REASON_WPTANDBKPT
= 3,
86 DBG_REASON_SINGLESTEP
= 4,
87 DBG_REASON_NOTHALTED
= 5,
88 DBG_REASON_UNDEFINED
= 6
91 extern const Jim_Nvp nvp_target_debug_reason
[];
95 TARGET_ENDIAN_UNKNOWN
=0,
96 TARGET_BIG_ENDIAN
= 1, TARGET_LITTLE_ENDIAN
= 2
99 extern const Jim_Nvp nvp_target_endian
[];
103 typedef struct working_area_s
109 struct working_area_s
**user
;
110 struct working_area_s
*next
;
113 typedef struct target_type_s
119 /* poll current target status */
120 int (*poll
)(struct target_s
*target
);
121 /* Invoked only from target_arch_state().
122 * Issue USER() w/architecture specific status. */
123 int (*arch_state
)(struct target_s
*target
);
125 /* target request support */
126 int (*target_request_data
)(struct target_s
*target
, u32 size
, u8
*buffer
);
128 /* halt will log a warning, but return ERROR_OK if the target is already halted. */
129 int (*halt
)(struct target_s
*target
);
130 int (*resume
)(struct target_s
*target
, int current
, u32 address
, int handle_breakpoints
, int debug_execution
);
131 int (*step
)(struct target_s
*target
, int current
, u32 address
, int handle_breakpoints
);
133 /* target reset control. assert reset can be invoked when OpenOCD and
134 * the target is out of sync.
136 * A typical example is that the target was power cycled while OpenOCD
137 * thought the target was halted or running.
139 * assert_reset() can therefore make no assumptions whatsoever about the
140 * state of the target
142 * Before assert_reset() for the target is invoked, a TRST/tms and
143 * chain validation is executed. TRST should not be asserted
144 * during target assert unless there is no way around it due to
145 * the way reset's are configured.
148 int (*assert_reset
)(struct target_s
*target
);
149 int (*deassert_reset
)(struct target_s
*target
);
150 int (*soft_reset_halt_imp
)(struct target_s
*target
);
151 int (*soft_reset_halt
)(struct target_s
*target
);
153 /* target register access for gdb.
155 * Danger! this function will succeed even if the target is running
156 * and return a register list with dummy values.
158 * The reason is that GDB connection will fail without a valid register
159 * list, however it is after GDB is connected that monitor commands can
160 * be run to properly initialize the target
162 int (*get_gdb_reg_list
)(struct target_s
*target
, struct reg_s
**reg_list
[], int *reg_list_size
);
164 /* target memory access
165 * size: 1 = byte (8bit), 2 = half-word (16bit), 4 = word (32bit)
166 * count: number of items of <size>
168 int (*read_memory_imp
)(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
);
169 int (*read_memory
)(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
);
170 int (*write_memory_imp
)(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
);
171 int (*write_memory
)(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
);
173 /* write target memory in multiples of 4 byte, optimized for writing large quantities of data */
174 int (*bulk_write_memory
)(struct target_s
*target
, u32 address
, u32 count
, u8
*buffer
);
176 int (*checksum_memory
)(struct target_s
*target
, u32 address
, u32 count
, u32
* checksum
);
177 int (*blank_check_memory
)(struct target_s
*target
, u32 address
, u32 count
, u32
* blank
);
180 * target break-/watchpoint control
181 * rw: 0 = write, 1 = read, 2 = access
183 * Target must be halted while this is invoked as this
184 * will actually set up breakpoints on target.
186 * The breakpoint hardware will be set up upon adding the first breakpoint.
188 * Upon GDB connection all breakpoints/watchpoints are cleared.
190 int (*add_breakpoint
)(struct target_s
*target
, breakpoint_t
*breakpoint
);
192 /* remove breakpoint. hw will only be updated if the target is currently halted.
193 * However, this method can be invoked on unresponsive targets.
195 int (*remove_breakpoint
)(struct target_s
*target
, breakpoint_t
*breakpoint
);
196 int (*add_watchpoint
)(struct target_s
*target
, watchpoint_t
*watchpoint
);
197 /* remove watchpoint. hw will only be updated if the target is currently halted.
198 * However, this method can be invoked on unresponsive targets.
200 int (*remove_watchpoint
)(struct target_s
*target
, watchpoint_t
*watchpoint
);
202 /* target algorithm support */
203 int (*run_algorithm_imp
)(struct target_s
*target
, int num_mem_params
, mem_param_t
*mem_params
, int num_reg_params
, reg_param_t
*reg_param
, u32 entry_point
, u32 exit_point
, int timeout_ms
, void *arch_info
);
204 int (*run_algorithm
)(struct target_s
*target
, int num_mem_params
, mem_param_t
*mem_params
, int num_reg_params
, reg_param_t
*reg_param
, u32 entry_point
, u32 exit_point
, int timeout_ms
, void *arch_info
);
206 int (*register_commands
)(struct command_context_s
*cmd_ctx
);
208 /* called when target is created */
209 int (*target_create
)( struct target_s
*target
, Jim_Interp
*interp
);
211 /* called for various config parameters */
212 /* returns JIM_CONTINUE - if option not understood */
213 /* otherwise: JIM_OK, or JIM_ERR, */
214 int (*target_jim_configure
)( struct target_s
*target
, Jim_GetOptInfo
*goi
);
216 /* target commands specifically handled by the target */
217 /* returns JIM_OK, or JIM_ERR, or JIM_CONTINUE - if option not understood */
218 int (*target_jim_commands
)( struct target_s
*target
, Jim_GetOptInfo
*goi
);
220 /* invoked after JTAG chain has been examined & validated. During
221 * this stage the target is examined and any additional setup is
224 * invoked every time after the jtag chain has been validated/examined
226 int (*examine
)(struct target_s
*target
);
227 /* Set up structures for target.
229 * It is illegal to talk to the target at this stage as this fn is invoked
230 * before the JTAG chain has been examined/verified
232 int (*init_target
)(struct command_context_s
*cmd_ctx
, struct target_s
*target
);
235 int (*virt2phys
)(struct target_s
*target
, u32 address
, u32
*physical
);
236 int (*mmu
)(struct target_s
*target
, int *enabled
);
240 /* forward decloration */
241 typedef struct target_event_action_s target_event_action_t
;
243 typedef struct target_s
245 target_type_t
*type
; /* target type definition (name, access functions) */
246 const char *cmd_name
; /* tcl Name of target */
247 int target_number
; /* generaly, target index but may not be in order */
248 jtag_tap_t
*tap
; /* where on the jtag chain is this */
249 const char *variant
; /* what varient of this chip is it? */
250 target_event_action_t
*event_action
;
252 int reset_halt
; /* attempt resetting the CPU into the halted mode? */
253 u32 working_area
; /* working area (initialized RAM). Evaluated
254 * upon first allocation from virtual/physical address. */
255 u32 working_area_virt
; /* virtual address */
256 u32 working_area_phys
; /* physical address */
257 u32 working_area_size
; /* size in bytes */
258 u32 backup_working_area
; /* whether the content of the working area has to be preserved */
259 struct working_area_s
*working_areas
;/* list of allocated working areas */
260 enum target_debug_reason debug_reason
;/* reason why the target entered debug state */
261 enum target_endianess endianness
; /* target endianess */
262 enum target_state state
; /* the current backend-state (running, halted, ...) */
263 struct reg_cache_s
*reg_cache
; /* the first register cache of the target (core regs) */
264 struct breakpoint_s
*breakpoints
; /* list of breakpoints */
265 struct watchpoint_s
*watchpoints
; /* list of watchpoints */
266 struct trace_s
*trace_info
; /* generic trace information */
267 struct debug_msg_receiver_s
*dbgmsg
;/* list of debug message receivers */
268 u32 dbg_msg_enabled
; /* debug message status */
269 void *arch_info
; /* architecture specific information */
270 struct target_s
*next
; /* next target in list */
272 int display
; /* display async info in telnet session. Do not display
273 * lots of halted/resumed info when stepping in debugger. */
278 /* LD historical names
279 * - Prior to the great TCL change
280 * - June/July/Aug 2008
282 TARGET_EVENT_OLD_gdb_program_config
,
283 TARGET_EVENT_OLD_pre_reset
,
284 TARGET_EVENT_OLD_post_reset
,
285 TARGET_EVENT_OLD_pre_resume
,
287 /* allow GDB to do stuff before others handle the halted event,
288 * this is in lieu of defining ordering of invocation of events,
289 * which would be more complicated */
290 TARGET_EVENT_EARLY_HALTED
,
291 TARGET_EVENT_HALTED
, /* target entered debug state from normal execution or reset */
292 TARGET_EVENT_RESUMED
, /* target resumed to normal execution */
293 TARGET_EVENT_RESUME_START
,
294 TARGET_EVENT_RESUME_END
,
296 TARGET_EVENT_GDB_START
, /* debugger started execution (step/run) */
297 TARGET_EVENT_GDB_END
, /* debugger stopped execution (step/run) */
299 TARGET_EVENT_RESET_START
,
300 TARGET_EVENT_RESET_ASSERT_PRE
,
301 TARGET_EVENT_RESET_ASSERT_POST
,
302 TARGET_EVENT_RESET_DEASSERT_PRE
,
303 TARGET_EVENT_RESET_DEASSERT_POST
,
304 TARGET_EVENT_RESET_HALT_PRE
,
305 TARGET_EVENT_RESET_HALT_POST
,
306 TARGET_EVENT_RESET_WAIT_PRE
,
307 TARGET_EVENT_RESET_WAIT_POST
,
308 TARGET_EVENT_RESET_INIT
,
309 TARGET_EVENT_RESET_END
,
311 TARGET_EVENT_DEBUG_HALTED
, /* target entered debug state, but was executing on behalf of the debugger */
312 TARGET_EVENT_DEBUG_RESUMED
, /* target resumed to execute on behalf of the debugger */
314 TARGET_EVENT_EXAMINE_START
,
315 TARGET_EVENT_EXAMINE_END
,
317 TARGET_EVENT_GDB_ATTACH
,
318 TARGET_EVENT_GDB_DETACH
,
320 TARGET_EVENT_GDB_FLASH_ERASE_START
,
321 TARGET_EVENT_GDB_FLASH_ERASE_END
,
322 TARGET_EVENT_GDB_FLASH_WRITE_START
,
323 TARGET_EVENT_GDB_FLASH_WRITE_END
,
326 extern const Jim_Nvp nvp_target_event
[];
328 struct target_event_action_s
{
329 enum target_event event
;
332 target_event_action_t
*next
;
335 typedef struct target_event_callback_s
337 int (*callback
)(struct target_s
*target
, enum target_event event
, void *priv
);
339 struct target_event_callback_s
*next
;
340 } target_event_callback_t
;
342 typedef struct target_timer_callback_s
344 int (*callback
)(void *priv
);
349 struct target_timer_callback_s
*next
;
350 } target_timer_callback_t
;
352 extern int target_register_commands(struct command_context_s
*cmd_ctx
);
353 extern int target_register_user_commands(struct command_context_s
*cmd_ctx
);
354 extern int target_init(struct command_context_s
*cmd_ctx
);
355 extern int target_examine(void);
356 extern int handle_target(void *priv
);
357 extern int target_process_reset(struct command_context_s
*cmd_ctx
, enum target_reset_mode reset_mode
);
359 extern int target_register_event_callback(int (*callback
)(struct target_s
*target
, enum target_event event
, void *priv
), void *priv
);
360 extern int target_unregister_event_callback(int (*callback
)(struct target_s
*target
, enum target_event event
, void *priv
), void *priv
);
361 extern int target_poll(target_t
*target
);
362 extern int target_resume(target_t
*target
, int current
, u32 address
, int handle_breakpoints
, int debug_execution
);
363 extern int target_halt(target_t
*target
);
364 extern int target_call_event_callbacks(target_t
*target
, enum target_event event
);
366 /* The period is very approximate, the callback can happen much more often
367 * or much more rarely than specified
369 extern int target_register_timer_callback(int (*callback
)(void *priv
), int time_ms
, int periodic
, void *priv
);
370 extern int target_unregister_timer_callback(int (*callback
)(void *priv
), void *priv
);
371 extern int target_call_timer_callbacks(void);
372 /* invoke this to ensure that e.g. polling timer callbacks happen before
373 * a syncrhonous command completes.
375 extern int target_call_timer_callbacks_now(void);
377 extern target_t
* get_current_target(struct command_context_s
*cmd_ctx
);
378 extern int get_num_by_target(target_t
*query_target
);
379 extern target_t
* get_target_by_num(int num
);
381 extern int target_write_buffer(struct target_s
*target
, u32 address
, u32 size
, u8
*buffer
);
382 extern int target_read_buffer(struct target_s
*target
, u32 address
, u32 size
, u8
*buffer
);
383 extern int target_checksum_memory(struct target_s
*target
, u32 address
, u32 size
, u32
* crc
);
384 extern int target_blank_check_memory(struct target_s
*target
, u32 address
, u32 size
, u32
* blank
);
385 extern int target_wait_state(target_t
*target
, enum target_state state
, int ms
);
389 * if "area" passed in to target_alloc_working_area() points to a memory
390 * location that goes out of scope (e.g. a pointer on the stack), then
391 * the caller of target_alloc_working_area() is responsible for invoking
392 * target_free_working_area() before "area" goes out of scope.
394 * target_free_all_working_areas() will NULL out the "area" pointer
395 * upon resuming or resetting the CPU.
398 extern int target_alloc_working_area(struct target_s
*target
, u32 size
, working_area_t
**area
);
399 extern int target_free_working_area(struct target_s
*target
, working_area_t
*area
);
400 extern int target_free_working_area_restore(struct target_s
*target
, working_area_t
*area
, int restore
);
401 extern void target_free_all_working_areas(struct target_s
*target
);
402 extern void target_free_all_working_areas_restore(struct target_s
*target
, int restore
);
404 extern target_t
*all_targets
;
406 extern target_event_callback_t
*target_event_callbacks
;
407 extern target_timer_callback_t
*target_timer_callbacks
;
409 extern u32
target_buffer_get_u32(target_t
*target
, u8
*buffer
);
410 extern u16
target_buffer_get_u16(target_t
*target
, u8
*buffer
);
411 extern u8
target_buffer_get_u8 (target_t
*target
, u8
*buffer
);
412 extern void target_buffer_set_u32(target_t
*target
, u8
*buffer
, u32 value
);
413 extern void target_buffer_set_u16(target_t
*target
, u8
*buffer
, u16 value
);
414 extern void target_buffer_set_u8 (target_t
*target
, u8
*buffer
, u8 value
);
416 int target_read_u32(struct target_s
*target
, u32 address
, u32
*value
);
417 int target_read_u16(struct target_s
*target
, u32 address
, u16
*value
);
418 int target_read_u8(struct target_s
*target
, u32 address
, u8
*value
);
419 int target_write_u32(struct target_s
*target
, u32 address
, u32 value
);
420 int target_write_u16(struct target_s
*target
, u32 address
, u16 value
);
421 int target_write_u8(struct target_s
*target
, u32 address
, u8 value
);
423 /* Issues USER() statements with target state information */
424 int target_arch_state(struct target_s
*target
);
426 void target_handle_event( target_t
*t
, enum target_event e
);
427 void target_all_handle_event( enum target_event e
);
429 #define ERROR_TARGET_INVALID (-300)
430 #define ERROR_TARGET_INIT_FAILED (-301)
431 #define ERROR_TARGET_TIMEOUT (-302)
432 #define ERROR_TARGET_NOT_HALTED (-304)
433 #define ERROR_TARGET_FAILURE (-305)
434 #define ERROR_TARGET_UNALIGNED_ACCESS (-306)
435 #define ERROR_TARGET_DATA_ABORT (-307)
436 #define ERROR_TARGET_RESOURCE_NOT_AVAILABLE (-308)
437 #define ERROR_TARGET_TRANSLATION_FAULT (-309)
438 #define ERROR_TARGET_NOT_RUNNING (-310)
439 #define ERROR_TARGET_NOT_EXAMINED (-311)
441 extern const Jim_Nvp nvp_error_target
[];
442 extern const char *target_strerror_safe( int err
);
444 #endif /* TARGET_H */
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)