1 /***************************************************************************
2 * Copyright (C) 2008 by Spencer Oliver *
3 * spen@spen-soft.co.uk *
5 * Copyright (C) 2008 by David T.L. Wong *
7 * This program is free software; you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation; either version 2 of the License, or *
10 * (at your option) any later version. *
12 * This program is distributed in the hope that it will be useful, *
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
15 * GNU General Public License for more details. *
17 * You should have received a copy of the GNU General Public License *
18 * along with this program; if not, write to the *
19 * Free Software Foundation, Inc., *
20 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
21 ***************************************************************************/
28 #include "mips32_dmaacc.h"
37 /* forward declarations */
38 int mips_m4k_poll(target_t
*target
);
39 int mips_m4k_halt(struct target_s
*target
);
40 int mips_m4k_soft_reset_halt(struct target_s
*target
);
41 int mips_m4k_resume(struct target_s
*target
, int current
, u32 address
, int handle_breakpoints
, int debug_execution
);
42 int mips_m4k_step(struct target_s
*target
, int current
, u32 address
, int handle_breakpoints
);
43 int mips_m4k_read_memory(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
);
44 int mips_m4k_write_memory(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
);
45 int mips_m4k_register_commands(struct command_context_s
*cmd_ctx
);
46 int mips_m4k_init_target(struct command_context_s
*cmd_ctx
, struct target_s
*target
);
47 int mips_m4k_quit(void);
48 int mips_m4k_target_create(struct target_s
*target
, Jim_Interp
*interp
);
50 int mips_m4k_examine(struct target_s
*target
);
51 int mips_m4k_assert_reset(target_t
*target
);
52 int mips_m4k_deassert_reset(target_t
*target
);
53 int mips_m4k_checksum_memory(target_t
*target
, u32 address
, u32 size
, u32
*checksum
);
55 target_type_t mips_m4k_target
=
59 .poll
= mips_m4k_poll
,
60 .arch_state
= mips32_arch_state
,
62 .target_request_data
= NULL
,
64 .halt
= mips_m4k_halt
,
65 .resume
= mips_m4k_resume
,
66 .step
= mips_m4k_step
,
68 .assert_reset
= mips_m4k_assert_reset
,
69 .deassert_reset
= mips_m4k_deassert_reset
,
70 .soft_reset_halt
= mips_m4k_soft_reset_halt
,
72 .get_gdb_reg_list
= mips32_get_gdb_reg_list
,
74 .read_memory
= mips_m4k_read_memory
,
75 .write_memory
= mips_m4k_write_memory
,
76 .bulk_write_memory
= mips_m4k_bulk_write_memory
,
77 .checksum_memory
= mips_m4k_checksum_memory
,
78 .blank_check_memory
= NULL
,
80 .run_algorithm
= mips32_run_algorithm
,
82 .add_breakpoint
= mips_m4k_add_breakpoint
,
83 .remove_breakpoint
= mips_m4k_remove_breakpoint
,
84 .add_watchpoint
= mips_m4k_add_watchpoint
,
85 .remove_watchpoint
= mips_m4k_remove_watchpoint
,
87 .register_commands
= mips_m4k_register_commands
,
88 .target_create
= mips_m4k_target_create
,
89 .init_target
= mips_m4k_init_target
,
90 .examine
= mips_m4k_examine
,
94 int mips_m4k_examine_debug_reason(target_t
*target
)
99 if ((target
->debug_reason
!= DBG_REASON_DBGRQ
)
100 && (target
->debug_reason
!= DBG_REASON_SINGLESTEP
))
102 /* get info about inst breakpoint support */
103 if ((retval
= target_read_u32(target
, EJTAG_IBS
, &break_status
)) != ERROR_OK
)
105 if (break_status
& 0x1f)
107 /* we have halted on a breakpoint */
108 if ((retval
= target_write_u32(target
, EJTAG_IBS
, 0)) != ERROR_OK
)
110 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
113 /* get info about data breakpoint support */
114 if ((retval
= target_read_u32(target
, 0xFF302000, &break_status
)) != ERROR_OK
)
116 if (break_status
& 0x1f)
118 /* we have halted on a breakpoint */
119 if ((retval
= target_write_u32(target
, 0xFF302000, 0)) != ERROR_OK
)
121 target
->debug_reason
= DBG_REASON_WATCHPOINT
;
128 int mips_m4k_debug_entry(target_t
*target
)
130 mips32_common_t
*mips32
= target
->arch_info
;
131 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
134 /* read debug register */
135 mips_ejtag_read_debug(ejtag_info
, &debug_reg
);
137 /* make sure break uit configured */
138 mips32_configure_break_unit(target
);
140 /* attempt to find halt reason */
141 mips_m4k_examine_debug_reason(target
);
143 /* clear single step if active */
144 if (debug_reg
& EJTAG_DEBUG_DSS
)
146 /* stopped due to single step - clear step bit */
147 mips_ejtag_config_step(ejtag_info
, 0);
150 mips32_save_context(target
);
152 LOG_DEBUG("entered debug state at PC 0x%x, target->state: %s",
153 *(u32
*)(mips32
->core_cache
->reg_list
[MIPS32_PC
].value
),
154 Jim_Nvp_value2name_simple( nvp_target_state
, target
->state
)->name
);
159 int mips_m4k_poll(target_t
*target
)
162 mips32_common_t
*mips32
= target
->arch_info
;
163 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
164 u32 ejtag_ctrl
= ejtag_info
->ejtag_ctrl
;
166 /* read ejtag control reg */
167 jtag_add_end_state(TAP_IDLE
);
168 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_CONTROL
, NULL
);
169 mips_ejtag_drscan_32(ejtag_info
, &ejtag_ctrl
);
171 /* clear this bit before handling polling
172 * as after reset registers will read zero */
173 if (ejtag_ctrl
& EJTAG_CTRL_ROCC
)
175 /* we have detected a reset, clear flag
176 * otherwise ejtag will not work */
177 jtag_add_end_state(TAP_IDLE
);
178 ejtag_ctrl
= ejtag_info
->ejtag_ctrl
& ~EJTAG_CTRL_ROCC
;
180 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_CONTROL
, NULL
);
181 mips_ejtag_drscan_32(ejtag_info
, &ejtag_ctrl
);
182 LOG_DEBUG("Reset Detected");
185 /* check for processor halted */
186 if (ejtag_ctrl
& EJTAG_CTRL_BRKST
)
188 if ((target
->state
== TARGET_RUNNING
) || (target
->state
== TARGET_RESET
))
190 jtag_add_end_state(TAP_IDLE
);
191 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_NORMALBOOT
, NULL
);
193 target
->state
= TARGET_HALTED
;
195 if ((retval
= mips_m4k_debug_entry(target
)) != ERROR_OK
)
198 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
200 else if (target
->state
== TARGET_DEBUG_RUNNING
)
202 target
->state
= TARGET_HALTED
;
204 if ((retval
= mips_m4k_debug_entry(target
)) != ERROR_OK
)
207 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_HALTED
);
212 target
->state
= TARGET_RUNNING
;
215 // LOG_DEBUG("ctrl=0x%08X", ejtag_ctrl);
220 int mips_m4k_halt(struct target_s
*target
)
222 mips32_common_t
*mips32
= target
->arch_info
;
223 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
225 LOG_DEBUG("target->state: %s",
226 Jim_Nvp_value2name_simple( nvp_target_state
, target
->state
)->name
);
228 if (target
->state
== TARGET_HALTED
)
230 LOG_DEBUG("target was already halted");
234 if (target
->state
== TARGET_UNKNOWN
)
236 LOG_WARNING("target was in unknown state when halt was requested");
239 if (target
->state
== TARGET_RESET
)
241 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) && jtag_srst
)
243 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
244 return ERROR_TARGET_FAILURE
;
248 /* we came here in a reset_halt or reset_init sequence
249 * debug entry was already prepared in mips32_prepare_reset_halt()
251 target
->debug_reason
= DBG_REASON_DBGRQ
;
257 /* break processor */
258 mips_ejtag_enter_debug(ejtag_info
);
260 target
->debug_reason
= DBG_REASON_DBGRQ
;
265 int mips_m4k_assert_reset(target_t
*target
)
267 mips32_common_t
*mips32
= target
->arch_info
;
268 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
270 LOG_DEBUG("target->state: %s",
271 Jim_Nvp_value2name_simple( nvp_target_state
, target
->state
)->name
);
273 if (!(jtag_reset_config
& RESET_HAS_SRST
))
275 LOG_ERROR("Can't assert SRST");
279 if (target
->reset_halt
)
281 /* use hardware to catch reset */
282 jtag_add_end_state(TAP_IDLE
);
283 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_EJTAGBOOT
, NULL
);
287 jtag_add_end_state(TAP_IDLE
);
288 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_NORMALBOOT
, NULL
);
291 if (strcmp(target
->variant
, "ejtag_srst") == 0)
293 u32 ejtag_ctrl
= ejtag_info
->ejtag_ctrl
| EJTAG_CTRL_PRRST
| EJTAG_CTRL_PERRST
;
294 LOG_DEBUG("Using EJTAG reset (PRRST) to reset processor...");
295 mips_ejtag_set_instr(ejtag_info
, EJTAG_INST_CONTROL
, NULL
);
296 mips_ejtag_drscan_32(ejtag_info
, &ejtag_ctrl
);
300 /* here we should issue a srst only, but we may have to assert trst as well */
301 if (jtag_reset_config
& RESET_SRST_PULLS_TRST
)
303 jtag_add_reset(1, 1);
307 jtag_add_reset(0, 1);
311 target
->state
= TARGET_RESET
;
312 jtag_add_sleep(50000);
314 mips32_invalidate_core_regs(target
);
316 if (target
->reset_halt
)
319 if ((retval
= target_halt(target
))!=ERROR_OK
)
326 int mips_m4k_deassert_reset(target_t
*target
)
328 LOG_DEBUG("target->state: %s",
329 Jim_Nvp_value2name_simple( nvp_target_state
, target
->state
)->name
);
331 /* deassert reset lines */
332 jtag_add_reset(0, 0);
337 int mips_m4k_soft_reset_halt(struct target_s
*target
)
343 int mips_m4k_single_step_core(target_t
*target
)
345 mips32_common_t
*mips32
= target
->arch_info
;
346 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
348 /* configure single step mode */
349 mips_ejtag_config_step(ejtag_info
, 1);
351 /* exit debug mode */
352 mips_ejtag_exit_debug(ejtag_info
, 1);
354 mips_m4k_debug_entry(target
);
359 int mips_m4k_resume(struct target_s
*target
, int current
, u32 address
, int handle_breakpoints
, int debug_execution
)
361 mips32_common_t
*mips32
= target
->arch_info
;
362 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
363 breakpoint_t
*breakpoint
= NULL
;
366 if (target
->state
!= TARGET_HALTED
)
368 LOG_WARNING("target not halted");
369 return ERROR_TARGET_NOT_HALTED
;
372 if (!debug_execution
)
374 target_free_all_working_areas(target
);
375 mips_m4k_enable_breakpoints(target
);
376 mips_m4k_enable_watchpoints(target
);
379 /* current = 1: continue on current pc, otherwise continue at <address> */
382 buf_set_u32(mips32
->core_cache
->reg_list
[MIPS32_PC
].value
, 0, 32, address
);
383 mips32
->core_cache
->reg_list
[MIPS32_PC
].dirty
= 1;
384 mips32
->core_cache
->reg_list
[MIPS32_PC
].valid
= 1;
387 resume_pc
= buf_get_u32(mips32
->core_cache
->reg_list
[MIPS32_PC
].value
, 0, 32);
389 mips32_restore_context(target
);
391 /* the front-end may request us not to handle breakpoints */
392 if (handle_breakpoints
)
394 /* Single step past breakpoint at current address */
395 if ((breakpoint
= breakpoint_find(target
, resume_pc
)))
397 LOG_DEBUG("unset breakpoint at 0x%8.8x", breakpoint
->address
);
398 mips_m4k_unset_breakpoint(target
, breakpoint
);
399 mips_m4k_single_step_core(target
);
400 mips_m4k_set_breakpoint(target
, breakpoint
);
404 /* exit debug mode - enable interrupts if required */
405 mips_ejtag_exit_debug(ejtag_info
, !debug_execution
);
406 target
->debug_reason
= DBG_REASON_NOTHALTED
;
408 /* registers are now invalid */
409 mips32_invalidate_core_regs(target
);
411 if (!debug_execution
)
413 target
->state
= TARGET_RUNNING
;
414 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
415 LOG_DEBUG("target resumed at 0x%x", resume_pc
);
419 target
->state
= TARGET_DEBUG_RUNNING
;
420 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_RESUMED
);
421 LOG_DEBUG("target debug resumed at 0x%x", resume_pc
);
427 int mips_m4k_step(struct target_s
*target
, int current
, u32 address
, int handle_breakpoints
)
429 /* get pointers to arch-specific information */
430 mips32_common_t
*mips32
= target
->arch_info
;
431 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
432 breakpoint_t
*breakpoint
= NULL
;
434 if (target
->state
!= TARGET_HALTED
)
436 LOG_WARNING("target not halted");
437 return ERROR_TARGET_NOT_HALTED
;
440 /* current = 1: continue on current pc, otherwise continue at <address> */
442 buf_set_u32(mips32
->core_cache
->reg_list
[MIPS32_PC
].value
, 0, 32, address
);
444 /* the front-end may request us not to handle breakpoints */
445 if (handle_breakpoints
)
446 if ((breakpoint
= breakpoint_find(target
, buf_get_u32(mips32
->core_cache
->reg_list
[MIPS32_PC
].value
, 0, 32))))
447 mips_m4k_unset_breakpoint(target
, breakpoint
);
449 /* restore context */
450 mips32_restore_context(target
);
452 /* configure single step mode */
453 mips_ejtag_config_step(ejtag_info
, 1);
455 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
457 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
459 /* exit debug mode */
460 mips_ejtag_exit_debug(ejtag_info
, 1);
462 /* registers are now invalid */
463 mips32_invalidate_core_regs(target
);
466 mips_m4k_set_breakpoint(target
, breakpoint
);
468 LOG_DEBUG("target stepped ");
470 mips_m4k_debug_entry(target
);
471 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
476 void mips_m4k_enable_breakpoints(struct target_s
*target
)
478 breakpoint_t
*breakpoint
= target
->breakpoints
;
480 /* set any pending breakpoints */
483 if (breakpoint
->set
== 0)
484 mips_m4k_set_breakpoint(target
, breakpoint
);
485 breakpoint
= breakpoint
->next
;
489 int mips_m4k_set_breakpoint(struct target_s
*target
, breakpoint_t
*breakpoint
)
491 mips32_common_t
*mips32
= target
->arch_info
;
492 mips32_comparator_t
* comparator_list
= mips32
->inst_break_list
;
497 LOG_WARNING("breakpoint already set");
501 if (breakpoint
->type
== BKPT_HARD
)
505 while(comparator_list
[bp_num
].used
&& (bp_num
< mips32
->num_inst_bpoints
))
507 if (bp_num
>= mips32
->num_inst_bpoints
)
509 LOG_DEBUG("ERROR Can not find free FP Comparator");
510 LOG_WARNING("ERROR Can not find free FP Comparator");
513 breakpoint
->set
= bp_num
+ 1;
514 comparator_list
[bp_num
].used
= 1;
515 comparator_list
[bp_num
].bp_value
= breakpoint
->address
;
516 target_write_u32(target
, comparator_list
[bp_num
].reg_address
, comparator_list
[bp_num
].bp_value
);
517 target_write_u32(target
, comparator_list
[bp_num
].reg_address
+ 0x08, 0x00000000);
518 target_write_u32(target
, comparator_list
[bp_num
].reg_address
+ 0x18, 1);
519 LOG_DEBUG("bp_num %i bp_value 0x%x", bp_num
, comparator_list
[bp_num
].bp_value
);
521 else if (breakpoint
->type
== BKPT_SOFT
)
523 if (breakpoint
->length
== 4)
525 u32 verify
= 0xffffffff;
527 if((retval
= target
->type
->read_memory(target
, breakpoint
->address
, breakpoint
->length
, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
531 if ((retval
= target_write_u32(target
, breakpoint
->address
, MIPS32_SDBBP
)) != ERROR_OK
)
536 if ((retval
= target_read_u32(target
, breakpoint
->address
, &verify
)) != ERROR_OK
)
540 if (verify
!= MIPS32_SDBBP
)
542 LOG_ERROR("Unable to set 32bit breakpoint at address %08x - check that memory is read/writable", breakpoint
->address
);
550 if((retval
= target
->type
->read_memory(target
, breakpoint
->address
, breakpoint
->length
, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
554 if ((retval
= target_write_u16(target
, breakpoint
->address
, MIPS16_SDBBP
)) != ERROR_OK
)
559 if ((retval
= target_read_u16(target
, breakpoint
->address
, &verify
)) != ERROR_OK
)
563 if (verify
!= MIPS16_SDBBP
)
565 LOG_ERROR("Unable to set 16bit breakpoint at address %08x - check that memory is read/writable", breakpoint
->address
);
570 breakpoint
->set
= 20; /* Any nice value but 0 */
576 int mips_m4k_unset_breakpoint(struct target_s
*target
, breakpoint_t
*breakpoint
)
578 /* get pointers to arch-specific information */
579 mips32_common_t
*mips32
= target
->arch_info
;
580 mips32_comparator_t
* comparator_list
= mips32
->inst_break_list
;
583 if (!breakpoint
->set
)
585 LOG_WARNING("breakpoint not set");
589 if (breakpoint
->type
== BKPT_HARD
)
591 int bp_num
= breakpoint
->set
- 1;
592 if ((bp_num
< 0) || (bp_num
>= mips32
->num_inst_bpoints
))
594 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
597 comparator_list
[bp_num
].used
= 0;
598 comparator_list
[bp_num
].bp_value
= 0;
599 target_write_u32(target
, comparator_list
[bp_num
].reg_address
+ 0x18, 0);
603 /* restore original instruction (kept in target endianness) */
604 if (breakpoint
->length
== 4)
608 /* check that user program has not modified breakpoint instruction */
609 if ((retval
= target
->type
->read_memory(target
, breakpoint
->address
, 4, 1, (u8
*)¤t_instr
)) != ERROR_OK
)
613 if (current_instr
== MIPS32_SDBBP
)
615 if((retval
= target
->type
->write_memory(target
, breakpoint
->address
, 4, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
625 /* check that user program has not modified breakpoint instruction */
626 if ((retval
= target
->type
->read_memory(target
, breakpoint
->address
, 2, 1, (u8
*)¤t_instr
)) != ERROR_OK
)
631 if (current_instr
== MIPS16_SDBBP
)
633 if((retval
= target
->type
->write_memory(target
, breakpoint
->address
, 2, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
645 int mips_m4k_add_breakpoint(struct target_s
*target
, breakpoint_t
*breakpoint
)
647 mips32_common_t
*mips32
= target
->arch_info
;
649 if (breakpoint
->type
== BKPT_HARD
)
651 if (mips32
->num_inst_bpoints_avail
< 1)
653 LOG_INFO("no hardware breakpoint available");
654 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
657 mips32
->num_inst_bpoints_avail
--;
660 mips_m4k_set_breakpoint(target
, breakpoint
);
665 int mips_m4k_remove_breakpoint(struct target_s
*target
, breakpoint_t
*breakpoint
)
667 /* get pointers to arch-specific information */
668 mips32_common_t
*mips32
= target
->arch_info
;
670 if (target
->state
!= TARGET_HALTED
)
672 LOG_WARNING("target not halted");
673 return ERROR_TARGET_NOT_HALTED
;
678 mips_m4k_unset_breakpoint(target
, breakpoint
);
681 if (breakpoint
->type
== BKPT_HARD
)
682 mips32
->num_inst_bpoints_avail
++;
687 int mips_m4k_set_watchpoint(struct target_s
*target
, watchpoint_t
*watchpoint
)
693 int mips_m4k_unset_watchpoint(struct target_s
*target
, watchpoint_t
*watchpoint
)
699 int mips_m4k_add_watchpoint(struct target_s
*target
, watchpoint_t
*watchpoint
)
705 int mips_m4k_remove_watchpoint(struct target_s
*target
, watchpoint_t
*watchpoint
)
711 void mips_m4k_enable_watchpoints(struct target_s
*target
)
713 watchpoint_t
*watchpoint
= target
->watchpoints
;
715 /* set any pending watchpoints */
718 if (watchpoint
->set
== 0)
719 mips_m4k_set_watchpoint(target
, watchpoint
);
720 watchpoint
= watchpoint
->next
;
724 int mips_m4k_read_memory(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
)
726 mips32_common_t
*mips32
= target
->arch_info
;
727 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
729 LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address
, size
, count
);
731 if (target
->state
!= TARGET_HALTED
)
733 LOG_WARNING("target not halted");
734 return ERROR_TARGET_NOT_HALTED
;
737 /* sanitize arguments */
738 if (((size
!= 4) && (size
!= 2) && (size
!= 1)) || (count
== 0) || !(buffer
))
739 return ERROR_INVALID_ARGUMENTS
;
741 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
742 return ERROR_TARGET_UNALIGNED_ACCESS
;
749 /* if noDMA off, use DMAACC mode for memory read */
750 if(ejtag_info
->impcode
& EJTAG_IMP_NODMA
)
751 return mips32_pracc_read_mem(ejtag_info
, address
, size
, count
, (void *)buffer
);
753 return mips32_dmaacc_read_mem(ejtag_info
, address
, size
, count
, (void *)buffer
);
755 LOG_ERROR("BUG: we shouldn't get here");
763 int mips_m4k_write_memory(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
)
765 mips32_common_t
*mips32
= target
->arch_info
;
766 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
768 LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address
, size
, count
);
770 if (target
->state
!= TARGET_HALTED
)
772 LOG_WARNING("target not halted");
773 return ERROR_TARGET_NOT_HALTED
;
776 /* sanitize arguments */
777 if (((size
!= 4) && (size
!= 2) && (size
!= 1)) || (count
== 0) || !(buffer
))
778 return ERROR_INVALID_ARGUMENTS
;
780 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
781 return ERROR_TARGET_UNALIGNED_ACCESS
;
788 /* if noDMA off, use DMAACC mode for memory write */
789 if(ejtag_info
->impcode
& EJTAG_IMP_NODMA
)
790 mips32_pracc_write_mem(ejtag_info
, address
, size
, count
, (void *)buffer
);
792 mips32_dmaacc_write_mem(ejtag_info
, address
, size
, count
, (void *)buffer
);
795 LOG_ERROR("BUG: we shouldn't get here");
803 int mips_m4k_register_commands(struct command_context_s
*cmd_ctx
)
807 retval
= mips32_register_commands(cmd_ctx
);
811 int mips_m4k_init_target(struct command_context_s
*cmd_ctx
, struct target_s
*target
)
813 mips32_build_reg_cache(target
);
818 int mips_m4k_quit(void)
823 int mips_m4k_init_arch_info(target_t
*target
, mips_m4k_common_t
*mips_m4k
, jtag_tap_t
*tap
)
825 mips32_common_t
*mips32
= &mips_m4k
->mips32_common
;
827 mips_m4k
->common_magic
= MIPSM4K_COMMON_MAGIC
;
829 /* initialize mips4k specific info */
830 mips32_init_arch_info(target
, mips32
, tap
);
831 mips32
->arch_info
= mips_m4k
;
836 int mips_m4k_target_create(struct target_s
*target
, Jim_Interp
*interp
)
838 mips_m4k_common_t
*mips_m4k
= calloc(1,sizeof(mips_m4k_common_t
));
840 mips_m4k_init_arch_info(target
, mips_m4k
, target
->tap
);
845 int mips_m4k_examine(struct target_s
*target
)
848 mips32_common_t
*mips32
= target
->arch_info
;
849 mips_ejtag_t
*ejtag_info
= &mips32
->ejtag_info
;
852 if (!target
->type
->examined
)
854 mips_ejtag_get_idcode(ejtag_info
, &idcode
, NULL
);
855 ejtag_info
->idcode
= idcode
;
857 if (((idcode
>> 1) & 0x7FF) == 0x29)
859 /* we are using a pic32mx so select ejtag port
860 * as it is not selected by default */
861 mips_ejtag_set_instr(ejtag_info
, 0x05, NULL
);
862 LOG_DEBUG("PIC32MX Detected - using EJTAG Interface");
866 /* init rest of ejtag interface */
867 if ((retval
= mips_ejtag_init(ejtag_info
)) != ERROR_OK
)
870 if ((retval
= mips32_examine(target
)) != ERROR_OK
)
876 int mips_m4k_bulk_write_memory(target_t
*target
, u32 address
, u32 count
, u8
*buffer
)
878 return mips_m4k_write_memory(target
, address
, 4, count
, buffer
);
881 int mips_m4k_checksum_memory(target_t
*target
, u32 address
, u32 size
, u32
*checksum
)
883 return ERROR_FAIL
; /* use bulk read method */
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)