1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2007-2010 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * Copyright (C) 2011 by Broadcom Corporation *
12 * Evan Hunter - ehunter@broadcom.com *
14 * Copyright (C) ST-Ericsson SA 2011 *
15 * michel.jaouen@stericsson.com : smp minimum support *
17 * Copyright (C) 2013 Andes Technology *
18 * Hsiangkai Wang <hkwang@andestech.com> *
20 * Copyright (C) 2013 Franck Jullien *
21 * elec4fun@gmail.com *
23 * This program is free software; you can redistribute it and/or modify *
24 * it under the terms of the GNU General Public License as published by *
25 * the Free Software Foundation; either version 2 of the License, or *
26 * (at your option) any later version. *
28 * This program is distributed in the hope that it will be useful, *
29 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
31 * GNU General Public License for more details. *
33 * You should have received a copy of the GNU General Public License *
34 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
35 ***************************************************************************/
41 #include <target/breakpoints.h>
42 #include <target/target_request.h>
43 #include <target/register.h>
44 #include <target/target.h>
45 #include <target/target_type.h>
47 #include <flash/nor/core.h>
48 #include "gdb_server.h"
49 #include <target/image.h>
50 #include <jtag/jtag.h>
51 #include "rtos/rtos.h"
52 #include "target/smp.h"
56 * GDB server implementation.
58 * This implements the GDB Remote Serial Protocol, over TCP connections,
59 * giving GDB access to the JTAG or other hardware debugging facilities
60 * found in most modern embedded processors.
63 struct target_desc_format
{
65 uint32_t tdesc_length
;
68 /* private connection data for GDB */
69 struct gdb_connection
{
70 char buffer
[GDB_BUFFER_SIZE
];
74 enum target_state frontend_state
;
75 struct image
*vflash_image
;
79 /* set flag to true if you want the next stepi to return immediately.
80 * allowing GDB to pick up a fresh set of register values from the target
81 * without modifying the target state. */
83 /* We delay reporting memory write errors until next step/continue or memory
84 * write. This improves performance of gdb load significantly as the GDB packet
85 * can be replied immediately and a new GDB packet will be ready without delay
86 * (ca. 10% or so...). */
88 /* with extended-remote it seems we need to better emulate attach/detach.
89 * what this means is we reply with a W stop reply after a kill packet,
90 * normally we reply with a S reply via gdb_last_signal_packet.
91 * as a side note this behaviour only effects gdb > 6.8 */
93 /* temporarily used for target description support */
94 struct target_desc_format target_desc
;
95 /* temporarily used for thread list support */
100 #define _DEBUG_GDB_IO_
103 static struct gdb_connection
*current_gdb_connection
;
105 static int gdb_breakpoint_override
;
106 static enum breakpoint_type gdb_breakpoint_override_type
;
108 static int gdb_error(struct connection
*connection
, int retval
);
109 static char *gdb_port
;
110 static char *gdb_port_next
;
112 static void gdb_log_callback(void *priv
, const char *file
, unsigned line
,
113 const char *function
, const char *string
);
115 static void gdb_sig_halted(struct connection
*connection
);
117 /* number of gdb connections, mainly to suppress gdb related debugging spam
118 * in helper/log.c when no gdb connections are actually active */
119 int gdb_actual_connections
;
121 /* set if we are sending a memory map to gdb
122 * via qXfer:memory-map:read packet */
123 /* enabled by default*/
124 static int gdb_use_memory_map
= 1;
125 /* enabled by default*/
126 static int gdb_flash_program
= 1;
128 /* if set, data aborts cause an error to be reported in memory read packets
129 * see the code in gdb_read_memory_packet() for further explanations.
130 * Disabled by default.
132 static int gdb_report_data_abort
;
134 /* set if we are sending target descriptions to gdb
135 * via qXfer:features:read packet */
136 /* enabled by default */
137 static int gdb_use_target_description
= 1;
139 /* current processing free-run type, used by file-I/O */
140 static char gdb_running_type
;
142 static int gdb_last_signal(struct target
*target
)
144 switch (target
->debug_reason
) {
145 case DBG_REASON_DBGRQ
:
146 return 0x2; /* SIGINT */
147 case DBG_REASON_BREAKPOINT
:
148 case DBG_REASON_WATCHPOINT
:
149 case DBG_REASON_WPTANDBKPT
:
150 return 0x05; /* SIGTRAP */
151 case DBG_REASON_SINGLESTEP
:
152 return 0x05; /* SIGTRAP */
153 case DBG_REASON_NOTHALTED
:
154 return 0x0; /* no signal... shouldn't happen */
156 LOG_USER("undefined debug reason %d - target needs reset",
157 target
->debug_reason
);
162 static int check_pending(struct connection
*connection
,
163 int timeout_s
, int *got_data
)
165 /* a non-blocking socket will block if there is 0 bytes available on the socket,
166 * but return with as many bytes as are available immediately
170 struct gdb_connection
*gdb_con
= connection
->priv
;
172 if (got_data
== NULL
)
176 if (gdb_con
->buf_cnt
> 0) {
182 FD_SET(connection
->fd
, &read_fds
);
184 tv
.tv_sec
= timeout_s
;
186 if (socket_select(connection
->fd
+ 1, &read_fds
, NULL
, NULL
, &tv
) == 0) {
187 /* This can typically be because a "monitor" command took too long
188 * before printing any progress messages
191 return ERROR_GDB_TIMEOUT
;
195 *got_data
= FD_ISSET(connection
->fd
, &read_fds
) != 0;
199 static int gdb_get_char_inner(struct connection
*connection
, int *next_char
)
201 struct gdb_connection
*gdb_con
= connection
->priv
;
202 int retval
= ERROR_OK
;
204 #ifdef _DEBUG_GDB_IO_
208 if (connection
->service
->type
!= CONNECTION_TCP
)
209 gdb_con
->buf_cnt
= read(connection
->fd
, gdb_con
->buffer
, GDB_BUFFER_SIZE
);
211 retval
= check_pending(connection
, 1, NULL
);
212 if (retval
!= ERROR_OK
)
214 gdb_con
->buf_cnt
= read_socket(connection
->fd
,
219 if (gdb_con
->buf_cnt
> 0)
221 if (gdb_con
->buf_cnt
== 0) {
222 gdb_con
->closed
= true;
223 return ERROR_SERVER_REMOTE_CLOSED
;
227 errno
= WSAGetLastError();
233 case WSAECONNABORTED
:
234 gdb_con
->closed
= true;
235 return ERROR_SERVER_REMOTE_CLOSED
;
237 gdb_con
->closed
= true;
238 return ERROR_SERVER_REMOTE_CLOSED
;
240 LOG_ERROR("read: %d", errno
);
249 gdb_con
->closed
= true;
250 return ERROR_SERVER_REMOTE_CLOSED
;
252 gdb_con
->closed
= true;
253 return ERROR_SERVER_REMOTE_CLOSED
;
255 LOG_ERROR("read: %s", strerror(errno
));
256 gdb_con
->closed
= true;
257 return ERROR_SERVER_REMOTE_CLOSED
;
262 #ifdef _DEBUG_GDB_IO_
263 debug_buffer
= strndup(gdb_con
->buffer
, gdb_con
->buf_cnt
);
264 LOG_DEBUG("received '%s'", debug_buffer
);
268 gdb_con
->buf_p
= gdb_con
->buffer
;
270 *next_char
= *(gdb_con
->buf_p
++);
271 if (gdb_con
->buf_cnt
> 0)
272 connection
->input_pending
= 1;
274 connection
->input_pending
= 0;
275 #ifdef _DEBUG_GDB_IO_
276 LOG_DEBUG("returned char '%c' (0x%2.2x)", *next_char
, *next_char
);
283 * The cool thing about this fn is that it allows buf_p and buf_cnt to be
284 * held in registers in the inner loop.
286 * For small caches and embedded systems this is important!
288 static inline int gdb_get_char_fast(struct connection
*connection
,
289 int *next_char
, char **buf_p
, int *buf_cnt
)
291 int retval
= ERROR_OK
;
293 if ((*buf_cnt
)-- > 0) {
294 *next_char
= **buf_p
;
297 connection
->input_pending
= 1;
299 connection
->input_pending
= 0;
301 #ifdef _DEBUG_GDB_IO_
302 LOG_DEBUG("returned char '%c' (0x%2.2x)", *next_char
, *next_char
);
308 struct gdb_connection
*gdb_con
= connection
->priv
;
309 gdb_con
->buf_p
= *buf_p
;
310 gdb_con
->buf_cnt
= *buf_cnt
;
311 retval
= gdb_get_char_inner(connection
, next_char
);
312 *buf_p
= gdb_con
->buf_p
;
313 *buf_cnt
= gdb_con
->buf_cnt
;
318 static int gdb_get_char(struct connection
*connection
, int *next_char
)
320 struct gdb_connection
*gdb_con
= connection
->priv
;
321 return gdb_get_char_fast(connection
, next_char
, &gdb_con
->buf_p
, &gdb_con
->buf_cnt
);
324 static int gdb_putback_char(struct connection
*connection
, int last_char
)
326 struct gdb_connection
*gdb_con
= connection
->priv
;
328 if (gdb_con
->buf_p
> gdb_con
->buffer
) {
329 *(--gdb_con
->buf_p
) = last_char
;
332 LOG_ERROR("BUG: couldn't put character back");
337 /* The only way we can detect that the socket is closed is the first time
338 * we write to it, we will fail. Subsequent write operations will
339 * succeed. Shudder! */
340 static int gdb_write(struct connection
*connection
, void *data
, int len
)
342 struct gdb_connection
*gdb_con
= connection
->priv
;
344 return ERROR_SERVER_REMOTE_CLOSED
;
346 if (connection_write(connection
, data
, len
) == len
)
348 gdb_con
->closed
= true;
349 return ERROR_SERVER_REMOTE_CLOSED
;
352 static int gdb_put_packet_inner(struct connection
*connection
,
353 char *buffer
, int len
)
356 unsigned char my_checksum
= 0;
357 #ifdef _DEBUG_GDB_IO_
362 struct gdb_connection
*gdb_con
= connection
->priv
;
364 for (i
= 0; i
< len
; i
++)
365 my_checksum
+= buffer
[i
];
367 #ifdef _DEBUG_GDB_IO_
369 * At this point we should have nothing in the input queue from GDB,
370 * however sometimes '-' is sent even though we've already received
371 * an ACK (+) for everything we've sent off.
375 retval
= check_pending(connection
, 0, &gotdata
);
376 if (retval
!= ERROR_OK
)
380 retval
= gdb_get_char(connection
, &reply
);
381 if (retval
!= ERROR_OK
)
384 /* fix a problem with some IAR tools */
385 gdb_putback_char(connection
, reply
);
386 LOG_DEBUG("Unexpected start of new packet");
390 LOG_WARNING("Discard unexpected char %c", reply
);
395 #ifdef _DEBUG_GDB_IO_
396 debug_buffer
= strndup(buffer
, len
);
397 LOG_DEBUG("sending packet '$%s#%2.2x'", debug_buffer
, my_checksum
);
401 char local_buffer
[1024];
402 local_buffer
[0] = '$';
403 if ((size_t)len
+ 4 <= sizeof(local_buffer
)) {
404 /* performance gain on smaller packets by only a single call to gdb_write() */
405 memcpy(local_buffer
+ 1, buffer
, len
++);
406 len
+= snprintf(local_buffer
+ len
, sizeof(local_buffer
) - len
, "#%02x", my_checksum
);
407 retval
= gdb_write(connection
, local_buffer
, len
);
408 if (retval
!= ERROR_OK
)
411 /* larger packets are transmitted directly from caller supplied buffer
412 * by several calls to gdb_write() to avoid dynamic allocation */
413 snprintf(local_buffer
+ 1, sizeof(local_buffer
) - 1, "#%02x", my_checksum
);
414 retval
= gdb_write(connection
, local_buffer
, 1);
415 if (retval
!= ERROR_OK
)
417 retval
= gdb_write(connection
, buffer
, len
);
418 if (retval
!= ERROR_OK
)
420 retval
= gdb_write(connection
, local_buffer
+ 1, 3);
421 if (retval
!= ERROR_OK
)
425 if (gdb_con
->noack_mode
)
428 retval
= gdb_get_char(connection
, &reply
);
429 if (retval
!= ERROR_OK
)
434 else if (reply
== '-') {
435 /* Stop sending output packets for now */
436 log_remove_callback(gdb_log_callback
, connection
);
437 LOG_WARNING("negative reply, retrying");
438 } else if (reply
== 0x3) {
440 retval
= gdb_get_char(connection
, &reply
);
441 if (retval
!= ERROR_OK
)
445 else if (reply
== '-') {
446 /* Stop sending output packets for now */
447 log_remove_callback(gdb_log_callback
, connection
);
448 LOG_WARNING("negative reply, retrying");
449 } else if (reply
== '$') {
450 LOG_ERROR("GDB missing ack(1) - assumed good");
451 gdb_putback_char(connection
, reply
);
454 LOG_ERROR("unknown character(1) 0x%2.2x in reply, dropping connection", reply
);
455 gdb_con
->closed
= true;
456 return ERROR_SERVER_REMOTE_CLOSED
;
458 } else if (reply
== '$') {
459 LOG_ERROR("GDB missing ack(2) - assumed good");
460 gdb_putback_char(connection
, reply
);
463 LOG_ERROR("unknown character(2) 0x%2.2x in reply, dropping connection",
465 gdb_con
->closed
= true;
466 return ERROR_SERVER_REMOTE_CLOSED
;
470 return ERROR_SERVER_REMOTE_CLOSED
;
475 int gdb_put_packet(struct connection
*connection
, char *buffer
, int len
)
477 struct gdb_connection
*gdb_con
= connection
->priv
;
478 gdb_con
->busy
= true;
479 int retval
= gdb_put_packet_inner(connection
, buffer
, len
);
480 gdb_con
->busy
= false;
482 /* we sent some data, reset timer for keep alive messages */
488 static inline int fetch_packet(struct connection
*connection
,
489 int *checksum_ok
, int noack
, int *len
, char *buffer
)
491 unsigned char my_checksum
= 0;
494 int retval
= ERROR_OK
;
496 struct gdb_connection
*gdb_con
= connection
->priv
;
501 /* move this over into local variables to use registers and give the
502 * more freedom to optimize */
503 char *buf_p
= gdb_con
->buf_p
;
504 int buf_cnt
= gdb_con
->buf_cnt
;
507 /* The common case is that we have an entire packet with no escape chars.
508 * We need to leave at least 2 bytes in the buffer to have
509 * gdb_get_char() update various bits and bobs correctly.
511 if ((buf_cnt
> 2) && ((buf_cnt
+ count
) < *len
)) {
512 /* The compiler will struggle a bit with constant propagation and
513 * aliasing, so we help it by showing that these values do not
514 * change inside the loop
518 int run
= buf_cnt
- 2;
524 if (character
== '#') {
525 /* Danger! character can be '#' when esc is
526 * used so we need an explicit boolean for done here. */
531 if (character
== '}') {
532 /* data transmitted in binary mode (X packet)
533 * uses 0x7d as escape character */
534 my_checksum
+= character
& 0xff;
537 my_checksum
+= character
& 0xff;
538 buffer
[count
++] = (character
^ 0x20) & 0xff;
540 my_checksum
+= character
& 0xff;
541 buffer
[count
++] = character
& 0xff;
550 LOG_ERROR("packet buffer too small");
551 retval
= ERROR_GDB_BUFFER_TOO_SMALL
;
555 retval
= gdb_get_char_fast(connection
, &character
, &buf_p
, &buf_cnt
);
556 if (retval
!= ERROR_OK
)
559 if (character
== '#')
562 if (character
== '}') {
563 /* data transmitted in binary mode (X packet)
564 * uses 0x7d as escape character */
565 my_checksum
+= character
& 0xff;
567 retval
= gdb_get_char_fast(connection
, &character
, &buf_p
, &buf_cnt
);
568 if (retval
!= ERROR_OK
)
571 my_checksum
+= character
& 0xff;
572 buffer
[count
++] = (character
^ 0x20) & 0xff;
574 my_checksum
+= character
& 0xff;
575 buffer
[count
++] = character
& 0xff;
579 gdb_con
->buf_p
= buf_p
;
580 gdb_con
->buf_cnt
= buf_cnt
;
582 if (retval
!= ERROR_OK
)
587 retval
= gdb_get_char(connection
, &character
);
588 if (retval
!= ERROR_OK
)
590 checksum
[0] = character
;
591 retval
= gdb_get_char(connection
, &character
);
592 if (retval
!= ERROR_OK
)
594 checksum
[1] = character
;
598 *checksum_ok
= (my_checksum
== strtoul(checksum
, NULL
, 16));
603 static int gdb_get_packet_inner(struct connection
*connection
,
604 char *buffer
, int *len
)
608 struct gdb_connection
*gdb_con
= connection
->priv
;
612 retval
= gdb_get_char(connection
, &character
);
613 if (retval
!= ERROR_OK
)
616 #ifdef _DEBUG_GDB_IO_
617 LOG_DEBUG("character: '%c'", character
);
624 /* According to the GDB documentation
625 * (https://sourceware.org/gdb/onlinedocs/gdb/Packet-Acknowledgment.html):
626 * "gdb sends a final `+` acknowledgment of the stub's `OK`
627 * response, which can be safely ignored by the stub."
628 * However OpenOCD server already is in noack mode at this
629 * point and instead of ignoring this it was emitting a
630 * warning. This code makes server ignore the first ACK
631 * that will be received after going into noack mode,
632 * warning only about subsequent ACK's. */
633 if (gdb_con
->noack_mode
> 1) {
634 LOG_WARNING("acknowledgment received, but no packet pending");
635 } else if (gdb_con
->noack_mode
) {
636 LOG_DEBUG("Received first acknowledgment after entering noack mode. Ignoring it.");
637 gdb_con
->noack_mode
= 2;
641 LOG_WARNING("negative acknowledgment, but no packet pending");
648 LOG_WARNING("ignoring character 0x%x", character
);
651 } while (character
!= '$');
654 /* explicit code expansion here to get faster inlined code in -O3 by not
655 * calculating checksum */
656 if (gdb_con
->noack_mode
) {
657 retval
= fetch_packet(connection
, &checksum_ok
, 1, len
, buffer
);
658 if (retval
!= ERROR_OK
)
661 retval
= fetch_packet(connection
, &checksum_ok
, 0, len
, buffer
);
662 if (retval
!= ERROR_OK
)
666 if (gdb_con
->noack_mode
) {
667 /* checksum is not checked in noack mode */
671 retval
= gdb_write(connection
, "+", 1);
672 if (retval
!= ERROR_OK
)
678 return ERROR_SERVER_REMOTE_CLOSED
;
683 static int gdb_get_packet(struct connection
*connection
, char *buffer
, int *len
)
685 struct gdb_connection
*gdb_con
= connection
->priv
;
686 gdb_con
->busy
= true;
687 int retval
= gdb_get_packet_inner(connection
, buffer
, len
);
688 gdb_con
->busy
= false;
692 static int gdb_output_con(struct connection
*connection
, const char *line
)
697 bin_size
= strlen(line
);
699 hex_buffer
= malloc(bin_size
* 2 + 2);
700 if (hex_buffer
== NULL
)
701 return ERROR_GDB_BUFFER_TOO_SMALL
;
704 size_t pkt_len
= hexify(hex_buffer
+ 1, (const uint8_t *)line
, bin_size
,
706 int retval
= gdb_put_packet(connection
, hex_buffer
, pkt_len
+ 1);
712 static int gdb_output(struct command_context
*context
, const char *line
)
714 /* this will be dumped to the log and also sent as an O packet if possible */
715 LOG_USER_N("%s", line
);
719 static void gdb_signal_reply(struct target
*target
, struct connection
*connection
)
721 struct gdb_connection
*gdb_connection
= connection
->priv
;
723 char stop_reason
[20];
724 char current_thread
[25];
728 rtos_update_threads(target
);
730 if (target
->debug_reason
== DBG_REASON_EXIT
) {
731 sig_reply_len
= snprintf(sig_reply
, sizeof(sig_reply
), "W00");
733 if (gdb_connection
->ctrl_c
) {
735 gdb_connection
->ctrl_c
= 0;
737 signal_var
= gdb_last_signal(target
);
739 stop_reason
[0] = '\0';
740 if (target
->debug_reason
== DBG_REASON_WATCHPOINT
) {
741 enum watchpoint_rw hit_wp_type
;
742 target_addr_t hit_wp_address
;
744 if (watchpoint_hit(target
, &hit_wp_type
, &hit_wp_address
) == ERROR_OK
) {
746 switch (hit_wp_type
) {
748 snprintf(stop_reason
, sizeof(stop_reason
),
749 "watch:%08" TARGET_PRIxADDR
";", hit_wp_address
);
752 snprintf(stop_reason
, sizeof(stop_reason
),
753 "rwatch:%08" TARGET_PRIxADDR
";", hit_wp_address
);
756 snprintf(stop_reason
, sizeof(stop_reason
),
757 "awatch:%08" TARGET_PRIxADDR
";", hit_wp_address
);
765 current_thread
[0] = '\0';
766 if (target
->rtos
!= NULL
) {
768 snprintf(current_thread
, sizeof(current_thread
), "thread:%016" PRIx64
";",
769 target
->rtos
->current_thread
);
770 target
->rtos
->current_threadid
= target
->rtos
->current_thread
;
771 target
->rtos
->gdb_target_for_threadid(connection
, target
->rtos
->current_threadid
, &ct
);
772 signal_var
= gdb_last_signal(ct
);
775 sig_reply_len
= snprintf(sig_reply
, sizeof(sig_reply
), "T%2.2x%s%s",
776 signal_var
, stop_reason
, current_thread
);
779 gdb_put_packet(connection
, sig_reply
, sig_reply_len
);
780 gdb_connection
->frontend_state
= TARGET_HALTED
;
783 static void gdb_fileio_reply(struct target
*target
, struct connection
*connection
)
785 struct gdb_connection
*gdb_connection
= connection
->priv
;
786 char fileio_command
[256];
788 bool program_exited
= false;
790 if (strcmp(target
->fileio_info
->identifier
, "open") == 0)
791 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
",%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
792 target
->fileio_info
->param_1
,
793 target
->fileio_info
->param_2
,
794 target
->fileio_info
->param_3
,
795 target
->fileio_info
->param_4
);
796 else if (strcmp(target
->fileio_info
->identifier
, "close") == 0)
797 sprintf(fileio_command
, "F%s,%" PRIx32
, target
->fileio_info
->identifier
,
798 target
->fileio_info
->param_1
);
799 else if (strcmp(target
->fileio_info
->identifier
, "read") == 0)
800 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
801 target
->fileio_info
->param_1
,
802 target
->fileio_info
->param_2
,
803 target
->fileio_info
->param_3
);
804 else if (strcmp(target
->fileio_info
->identifier
, "write") == 0)
805 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
806 target
->fileio_info
->param_1
,
807 target
->fileio_info
->param_2
,
808 target
->fileio_info
->param_3
);
809 else if (strcmp(target
->fileio_info
->identifier
, "lseek") == 0)
810 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
811 target
->fileio_info
->param_1
,
812 target
->fileio_info
->param_2
,
813 target
->fileio_info
->param_3
);
814 else if (strcmp(target
->fileio_info
->identifier
, "rename") == 0)
815 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
",%" PRIx32
"/%" PRIx32
, target
->fileio_info
->identifier
,
816 target
->fileio_info
->param_1
,
817 target
->fileio_info
->param_2
,
818 target
->fileio_info
->param_3
,
819 target
->fileio_info
->param_4
);
820 else if (strcmp(target
->fileio_info
->identifier
, "unlink") == 0)
821 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
, target
->fileio_info
->identifier
,
822 target
->fileio_info
->param_1
,
823 target
->fileio_info
->param_2
);
824 else if (strcmp(target
->fileio_info
->identifier
, "stat") == 0)
825 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
826 target
->fileio_info
->param_1
,
827 target
->fileio_info
->param_2
,
828 target
->fileio_info
->param_3
);
829 else if (strcmp(target
->fileio_info
->identifier
, "fstat") == 0)
830 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
831 target
->fileio_info
->param_1
,
832 target
->fileio_info
->param_2
);
833 else if (strcmp(target
->fileio_info
->identifier
, "gettimeofday") == 0)
834 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
835 target
->fileio_info
->param_1
,
836 target
->fileio_info
->param_2
);
837 else if (strcmp(target
->fileio_info
->identifier
, "isatty") == 0)
838 sprintf(fileio_command
, "F%s,%" PRIx32
, target
->fileio_info
->identifier
,
839 target
->fileio_info
->param_1
);
840 else if (strcmp(target
->fileio_info
->identifier
, "system") == 0)
841 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
, target
->fileio_info
->identifier
,
842 target
->fileio_info
->param_1
,
843 target
->fileio_info
->param_2
);
844 else if (strcmp(target
->fileio_info
->identifier
, "exit") == 0) {
845 /* If target hits exit syscall, report to GDB the program is terminated.
846 * In addition, let target run its own exit syscall handler. */
847 program_exited
= true;
848 sprintf(fileio_command
, "W%02" PRIx32
, target
->fileio_info
->param_1
);
850 LOG_DEBUG("Unknown syscall: %s", target
->fileio_info
->identifier
);
852 /* encounter unknown syscall, continue */
853 gdb_connection
->frontend_state
= TARGET_RUNNING
;
854 target_resume(target
, 1, 0x0, 0, 0);
858 command_len
= strlen(fileio_command
);
859 gdb_put_packet(connection
, fileio_command
, command_len
);
861 if (program_exited
) {
862 /* Use target_resume() to let target run its own exit syscall handler. */
863 gdb_connection
->frontend_state
= TARGET_RUNNING
;
864 target_resume(target
, 1, 0x0, 0, 0);
866 gdb_connection
->frontend_state
= TARGET_HALTED
;
867 rtos_update_threads(target
);
871 static void gdb_frontend_halted(struct target
*target
, struct connection
*connection
)
873 struct gdb_connection
*gdb_connection
= connection
->priv
;
875 /* In the GDB protocol when we are stepping or continuing execution,
876 * we have a lingering reply. Upon receiving a halted event
877 * when we have that lingering packet, we reply to the original
878 * step or continue packet.
880 * Executing monitor commands can bring the target in and
881 * out of the running state so we'll see lots of TARGET_EVENT_XXX
882 * that are to be ignored.
884 if (gdb_connection
->frontend_state
== TARGET_RUNNING
) {
885 /* stop forwarding log packets! */
886 log_remove_callback(gdb_log_callback
, connection
);
888 /* check fileio first */
889 if (target_get_gdb_fileio_info(target
, target
->fileio_info
) == ERROR_OK
)
890 gdb_fileio_reply(target
, connection
);
892 gdb_signal_reply(target
, connection
);
896 static int gdb_target_callback_event_handler(struct target
*target
,
897 enum target_event event
, void *priv
)
900 struct connection
*connection
= priv
;
901 struct gdb_service
*gdb_service
= connection
->service
->priv
;
903 if (gdb_service
->target
!= target
)
907 case TARGET_EVENT_GDB_HALT
:
908 gdb_frontend_halted(target
, connection
);
910 case TARGET_EVENT_HALTED
:
911 target_call_event_callbacks(target
, TARGET_EVENT_GDB_END
);
913 case TARGET_EVENT_GDB_FLASH_ERASE_START
:
914 retval
= jtag_execute_queue();
915 if (retval
!= ERROR_OK
)
925 static int gdb_new_connection(struct connection
*connection
)
927 struct gdb_connection
*gdb_connection
= malloc(sizeof(struct gdb_connection
));
928 struct target
*target
;
932 target
= get_target_from_connection(connection
);
933 connection
->priv
= gdb_connection
;
935 /* initialize gdb connection information */
936 gdb_connection
->buf_p
= gdb_connection
->buffer
;
937 gdb_connection
->buf_cnt
= 0;
938 gdb_connection
->ctrl_c
= 0;
939 gdb_connection
->frontend_state
= TARGET_HALTED
;
940 gdb_connection
->vflash_image
= NULL
;
941 gdb_connection
->closed
= false;
942 gdb_connection
->busy
= false;
943 gdb_connection
->noack_mode
= 0;
944 gdb_connection
->sync
= false;
945 gdb_connection
->mem_write_error
= false;
946 gdb_connection
->attached
= true;
947 gdb_connection
->target_desc
.tdesc
= NULL
;
948 gdb_connection
->target_desc
.tdesc_length
= 0;
949 gdb_connection
->thread_list
= NULL
;
951 /* send ACK to GDB for debug request */
952 gdb_write(connection
, "+", 1);
954 /* output goes through gdb connection */
955 command_set_output_handler(connection
->cmd_ctx
, gdb_output
, connection
);
957 /* we must remove all breakpoints registered to the target as a previous
958 * GDB session could leave dangling breakpoints if e.g. communication
961 breakpoint_clear_target(target
);
962 watchpoint_clear_target(target
);
965 /* clean previous rtos session if supported*/
966 if (target
->rtos
->type
->clean
)
967 target
->rtos
->type
->clean(target
);
970 rtos_update_threads(target
);
973 /* remove the initial ACK from the incoming buffer */
974 retval
= gdb_get_char(connection
, &initial_ack
);
975 if (retval
!= ERROR_OK
)
978 /* FIX!!!??? would we actually ever receive a + here???
981 if (initial_ack
!= '+')
982 gdb_putback_char(connection
, initial_ack
);
983 target_call_event_callbacks(target
, TARGET_EVENT_GDB_ATTACH
);
985 if (gdb_use_memory_map
) {
986 /* Connect must fail if the memory map can't be set up correctly.
988 * This will cause an auto_probe to be invoked, which is either
989 * a no-op or it will fail when the target isn't ready(e.g. not halted).
992 for (i
= 0; i
< flash_get_bank_count(); i
++) {
993 struct flash_bank
*p
;
994 p
= get_flash_bank_by_num_noprobe(i
);
995 if (p
->target
!= target
)
997 retval
= get_flash_bank_by_num(i
, &p
);
998 if (retval
!= ERROR_OK
) {
999 LOG_ERROR("Connect failed. Consider setting up a gdb-attach event for the target " \
1000 "to prepare target for GDB connect, or use 'gdb_memory_map disable'.");
1006 gdb_actual_connections
++;
1007 log_printf_lf(all_targets
->next
!= NULL
? LOG_LVL_INFO
: LOG_LVL_DEBUG
,
1008 __FILE__
, __LINE__
, __func__
,
1009 "New GDB Connection: %d, Target %s, state: %s",
1010 gdb_actual_connections
,
1011 target_name(target
),
1012 target_state_name(target
));
1014 /* DANGER! If we fail subsequently, we must remove this handler,
1015 * otherwise we occasionally see crashes as the timer can invoke the
1018 * register callback to be informed about target events */
1019 target_register_event_callback(gdb_target_callback_event_handler
, connection
);
1024 static int gdb_connection_closed(struct connection
*connection
)
1026 struct target
*target
;
1027 struct gdb_connection
*gdb_connection
= connection
->priv
;
1029 target
= get_target_from_connection(connection
);
1031 /* we're done forwarding messages. Tear down callback before
1032 * cleaning up connection.
1034 log_remove_callback(gdb_log_callback
, connection
);
1036 gdb_actual_connections
--;
1037 LOG_DEBUG("GDB Close, Target: %s, state: %s, gdb_actual_connections=%d",
1038 target_name(target
),
1039 target_state_name(target
),
1040 gdb_actual_connections
);
1042 /* see if an image built with vFlash commands is left */
1043 if (gdb_connection
->vflash_image
) {
1044 image_close(gdb_connection
->vflash_image
);
1045 free(gdb_connection
->vflash_image
);
1046 gdb_connection
->vflash_image
= NULL
;
1049 /* if this connection registered a debug-message receiver delete it */
1050 delete_debug_msg_receiver(connection
->cmd_ctx
, target
);
1052 if (connection
->priv
) {
1053 free(connection
->priv
);
1054 connection
->priv
= NULL
;
1056 LOG_ERROR("BUG: connection->priv == NULL");
1058 target_unregister_event_callback(gdb_target_callback_event_handler
, connection
);
1060 target_call_event_callbacks(target
, TARGET_EVENT_GDB_END
);
1062 target_call_event_callbacks(target
, TARGET_EVENT_GDB_DETACH
);
1067 static void gdb_send_error(struct connection
*connection
, uint8_t the_error
)
1070 snprintf(err
, 4, "E%2.2X", the_error
);
1071 gdb_put_packet(connection
, err
, 3);
1074 static int gdb_last_signal_packet(struct connection
*connection
,
1075 char const *packet
, int packet_size
)
1077 struct target
*target
= get_target_from_connection(connection
);
1078 struct gdb_connection
*gdb_con
= connection
->priv
;
1082 if (!gdb_con
->attached
) {
1083 /* if we are here we have received a kill packet
1084 * reply W stop reply otherwise gdb gets very unhappy */
1085 gdb_put_packet(connection
, "W00", 3);
1089 signal_var
= gdb_last_signal(target
);
1091 snprintf(sig_reply
, 4, "S%2.2x", signal_var
);
1092 gdb_put_packet(connection
, sig_reply
, 3);
1097 static inline int gdb_reg_pos(struct target
*target
, int pos
, int len
)
1099 if (target
->endianness
== TARGET_LITTLE_ENDIAN
)
1102 return len
- 1 - pos
;
1105 /* Convert register to string of bytes. NB! The # of bits in the
1106 * register might be non-divisible by 8(a byte), in which
1107 * case an entire byte is shown.
1109 * NB! the format on the wire is the target endianness
1111 * The format of reg->value is little endian
1114 static void gdb_str_to_target(struct target
*target
,
1115 char *tstr
, struct reg
*reg
)
1122 buf_len
= DIV_ROUND_UP(reg
->size
, 8);
1124 for (i
= 0; i
< buf_len
; i
++) {
1125 int j
= gdb_reg_pos(target
, i
, buf_len
);
1126 tstr
+= sprintf(tstr
, "%02x", buf
[j
]);
1130 /* copy over in register buffer */
1131 static void gdb_target_to_reg(struct target
*target
,
1132 char const *tstr
, int str_len
, uint8_t *bin
)
1135 LOG_ERROR("BUG: gdb value with uneven number of characters encountered");
1140 for (i
= 0; i
< str_len
; i
+= 2) {
1142 if (sscanf(tstr
+ i
, "%02x", &t
) != 1) {
1143 LOG_ERROR("BUG: unable to convert register value");
1147 int j
= gdb_reg_pos(target
, i
/2, str_len
/2);
1152 static int gdb_get_registers_packet(struct connection
*connection
,
1153 char const *packet
, int packet_size
)
1155 struct target
*target
= get_target_from_connection(connection
);
1156 struct reg
**reg_list
;
1159 int reg_packet_size
= 0;
1164 #ifdef _DEBUG_GDB_IO_
1168 if ((target
->rtos
!= NULL
) && (ERROR_OK
== rtos_get_gdb_reg_list(connection
)))
1171 retval
= target_get_gdb_reg_list(target
, ®_list
, ®_list_size
,
1173 if (retval
!= ERROR_OK
)
1174 return gdb_error(connection
, retval
);
1176 for (i
= 0; i
< reg_list_size
; i
++)
1177 reg_packet_size
+= DIV_ROUND_UP(reg_list
[i
]->size
, 8) * 2;
1179 assert(reg_packet_size
> 0);
1181 reg_packet
= malloc(reg_packet_size
+ 1); /* plus one for string termination null */
1182 if (reg_packet
== NULL
)
1185 reg_packet_p
= reg_packet
;
1187 for (i
= 0; i
< reg_list_size
; i
++) {
1188 if (!reg_list
[i
]->valid
)
1189 reg_list
[i
]->type
->get(reg_list
[i
]);
1190 gdb_str_to_target(target
, reg_packet_p
, reg_list
[i
]);
1191 reg_packet_p
+= DIV_ROUND_UP(reg_list
[i
]->size
, 8) * 2;
1194 #ifdef _DEBUG_GDB_IO_
1196 char *reg_packet_p_debug
;
1197 reg_packet_p_debug
= strndup(reg_packet
, reg_packet_size
);
1198 LOG_DEBUG("reg_packet: %s", reg_packet_p_debug
);
1199 free(reg_packet_p_debug
);
1203 gdb_put_packet(connection
, reg_packet
, reg_packet_size
);
1211 static int gdb_set_registers_packet(struct connection
*connection
,
1212 char const *packet
, int packet_size
)
1214 struct target
*target
= get_target_from_connection(connection
);
1216 struct reg
**reg_list
;
1219 char const *packet_p
;
1221 #ifdef _DEBUG_GDB_IO_
1225 /* skip command character */
1229 if (packet_size
% 2) {
1230 LOG_WARNING("GDB set_registers packet with uneven characters received, dropping connection");
1231 return ERROR_SERVER_REMOTE_CLOSED
;
1234 retval
= target_get_gdb_reg_list(target
, ®_list
, ®_list_size
,
1236 if (retval
!= ERROR_OK
)
1237 return gdb_error(connection
, retval
);
1240 for (i
= 0; i
< reg_list_size
; i
++) {
1242 int chars
= (DIV_ROUND_UP(reg_list
[i
]->size
, 8) * 2);
1244 if (packet_p
+ chars
> packet
+ packet_size
)
1245 LOG_ERROR("BUG: register packet is too small for registers");
1247 bin_buf
= malloc(DIV_ROUND_UP(reg_list
[i
]->size
, 8));
1248 gdb_target_to_reg(target
, packet_p
, chars
, bin_buf
);
1250 reg_list
[i
]->type
->set(reg_list
[i
], bin_buf
);
1252 /* advance packet pointer */
1258 /* free struct reg *reg_list[] array allocated by get_gdb_reg_list */
1261 gdb_put_packet(connection
, "OK", 2);
1266 static int gdb_get_register_packet(struct connection
*connection
,
1267 char const *packet
, int packet_size
)
1269 struct target
*target
= get_target_from_connection(connection
);
1271 int reg_num
= strtoul(packet
+ 1, NULL
, 16);
1272 struct reg
**reg_list
;
1276 #ifdef _DEBUG_GDB_IO_
1280 retval
= target_get_gdb_reg_list(target
, ®_list
, ®_list_size
,
1282 if (retval
!= ERROR_OK
)
1283 return gdb_error(connection
, retval
);
1285 if (reg_list_size
<= reg_num
) {
1286 LOG_ERROR("gdb requested a non-existing register");
1287 return ERROR_SERVER_REMOTE_CLOSED
;
1290 if (!reg_list
[reg_num
]->valid
)
1291 reg_list
[reg_num
]->type
->get(reg_list
[reg_num
]);
1293 reg_packet
= malloc(DIV_ROUND_UP(reg_list
[reg_num
]->size
, 8) * 2 + 1); /* plus one for string termination null */
1295 gdb_str_to_target(target
, reg_packet
, reg_list
[reg_num
]);
1297 gdb_put_packet(connection
, reg_packet
, DIV_ROUND_UP(reg_list
[reg_num
]->size
, 8) * 2);
1305 static int gdb_set_register_packet(struct connection
*connection
,
1306 char const *packet
, int packet_size
)
1308 struct target
*target
= get_target_from_connection(connection
);
1311 int reg_num
= strtoul(packet
+ 1, &separator
, 16);
1312 struct reg
**reg_list
;
1318 retval
= target_get_gdb_reg_list(target
, ®_list
, ®_list_size
,
1320 if (retval
!= ERROR_OK
)
1321 return gdb_error(connection
, retval
);
1323 if (reg_list_size
<= reg_num
) {
1324 LOG_ERROR("gdb requested a non-existing register");
1325 return ERROR_SERVER_REMOTE_CLOSED
;
1328 if (*separator
!= '=') {
1329 LOG_ERROR("GDB 'set register packet', but no '=' following the register number");
1330 return ERROR_SERVER_REMOTE_CLOSED
;
1333 /* convert from GDB-string (target-endian) to hex-string (big-endian) */
1334 bin_buf
= malloc(DIV_ROUND_UP(reg_list
[reg_num
]->size
, 8));
1335 int chars
= (DIV_ROUND_UP(reg_list
[reg_num
]->size
, 8) * 2);
1337 if ((unsigned int)chars
!= strlen(separator
+ 1)) {
1338 LOG_ERROR("gdb sent a packet with wrong register size");
1340 return ERROR_SERVER_REMOTE_CLOSED
;
1343 gdb_target_to_reg(target
, separator
+ 1, chars
, bin_buf
);
1345 reg_list
[reg_num
]->type
->set(reg_list
[reg_num
], bin_buf
);
1347 gdb_put_packet(connection
, "OK", 2);
1355 /* No attempt is made to translate the "retval" to
1356 * GDB speak. This has to be done at the calling
1357 * site as no mapping really exists.
1359 static int gdb_error(struct connection
*connection
, int retval
)
1361 LOG_DEBUG("Reporting %i to GDB as generic error", retval
);
1362 gdb_send_error(connection
, EFAULT
);
1366 /* We don't have to worry about the default 2 second timeout for GDB packets,
1367 * because GDB breaks up large memory reads into smaller reads.
1369 * 8191 bytes by the looks of it. Why 8191 bytes instead of 8192?????
1371 static int gdb_read_memory_packet(struct connection
*connection
,
1372 char const *packet
, int packet_size
)
1374 struct target
*target
= get_target_from_connection(connection
);
1382 int retval
= ERROR_OK
;
1384 /* skip command character */
1387 addr
= strtoull(packet
, &separator
, 16);
1389 if (*separator
!= ',') {
1390 LOG_ERROR("incomplete read memory packet received, dropping connection");
1391 return ERROR_SERVER_REMOTE_CLOSED
;
1394 len
= strtoul(separator
+ 1, NULL
, 16);
1397 LOG_WARNING("invalid read memory packet received (len == 0)");
1398 gdb_put_packet(connection
, NULL
, 0);
1402 buffer
= malloc(len
);
1404 LOG_DEBUG("addr: 0x%16.16" PRIx64
", len: 0x%8.8" PRIx32
"", addr
, len
);
1406 retval
= target_read_buffer(target
, addr
, len
, buffer
);
1408 if ((retval
!= ERROR_OK
) && !gdb_report_data_abort
) {
1409 /* TODO : Here we have to lie and send back all zero's lest stack traces won't work.
1410 * At some point this might be fixed in GDB, in which case this code can be removed.
1412 * OpenOCD developers are acutely aware of this problem, but there is nothing
1413 * gained by involving the user in this problem that hopefully will get resolved
1416 * http://sourceware.org/cgi-bin/gnatsweb.pl? \
1417 * cmd = view%20audit-trail&database = gdb&pr = 2395
1419 * For now, the default is to fix up things to make current GDB versions work.
1420 * This can be overwritten using the gdb_report_data_abort <'enable'|'disable'> command.
1422 memset(buffer
, 0, len
);
1426 if (retval
== ERROR_OK
) {
1427 hex_buffer
= malloc(len
* 2 + 1);
1429 size_t pkt_len
= hexify(hex_buffer
, buffer
, len
, len
* 2 + 1);
1431 gdb_put_packet(connection
, hex_buffer
, pkt_len
);
1435 retval
= gdb_error(connection
, retval
);
1442 static int gdb_write_memory_packet(struct connection
*connection
,
1443 char const *packet
, int packet_size
)
1445 struct target
*target
= get_target_from_connection(connection
);
1453 /* skip command character */
1456 addr
= strtoull(packet
, &separator
, 16);
1458 if (*separator
!= ',') {
1459 LOG_ERROR("incomplete write memory packet received, dropping connection");
1460 return ERROR_SERVER_REMOTE_CLOSED
;
1463 len
= strtoul(separator
+ 1, &separator
, 16);
1465 if (*(separator
++) != ':') {
1466 LOG_ERROR("incomplete write memory packet received, dropping connection");
1467 return ERROR_SERVER_REMOTE_CLOSED
;
1470 buffer
= malloc(len
);
1472 LOG_DEBUG("addr: 0x%" PRIx64
", len: 0x%8.8" PRIx32
"", addr
, len
);
1474 if (unhexify(buffer
, separator
, len
) != len
)
1475 LOG_ERROR("unable to decode memory packet");
1477 retval
= target_write_buffer(target
, addr
, len
, buffer
);
1479 if (retval
== ERROR_OK
)
1480 gdb_put_packet(connection
, "OK", 2);
1482 retval
= gdb_error(connection
, retval
);
1489 static int gdb_write_memory_binary_packet(struct connection
*connection
,
1490 char const *packet
, int packet_size
)
1492 struct target
*target
= get_target_from_connection(connection
);
1497 int retval
= ERROR_OK
;
1498 /* Packets larger than fast_limit bytes will be acknowledged instantly on
1499 * the assumption that we're in a download and it's important to go as fast
1501 uint32_t fast_limit
= 8;
1503 /* skip command character */
1506 addr
= strtoull(packet
, &separator
, 16);
1508 if (*separator
!= ',') {
1509 LOG_ERROR("incomplete write memory binary packet received, dropping connection");
1510 return ERROR_SERVER_REMOTE_CLOSED
;
1513 len
= strtoul(separator
+ 1, &separator
, 16);
1515 if (*(separator
++) != ':') {
1516 LOG_ERROR("incomplete write memory binary packet received, dropping connection");
1517 return ERROR_SERVER_REMOTE_CLOSED
;
1520 struct gdb_connection
*gdb_connection
= connection
->priv
;
1522 if (gdb_connection
->mem_write_error
)
1523 retval
= ERROR_FAIL
;
1525 if (retval
== ERROR_OK
) {
1526 if (len
>= fast_limit
) {
1527 /* By replying the packet *immediately* GDB will send us a new packet
1528 * while we write the last one to the target.
1529 * We only do this for larger writes, so that users who do something like:
1530 * p *((int*)0xdeadbeef)=8675309
1531 * will get immediate feedback that that write failed.
1533 gdb_put_packet(connection
, "OK", 2);
1536 retval
= gdb_error(connection
, retval
);
1537 /* now that we have reported the memory write error, we can clear the condition */
1538 gdb_connection
->mem_write_error
= false;
1539 if (retval
!= ERROR_OK
)
1544 LOG_DEBUG("addr: 0x%" PRIx64
", len: 0x%8.8" PRIx32
"", addr
, len
);
1546 retval
= target_write_buffer(target
, addr
, len
, (uint8_t *)separator
);
1547 if (retval
!= ERROR_OK
)
1548 gdb_connection
->mem_write_error
= true;
1551 if (len
< fast_limit
) {
1552 if (retval
!= ERROR_OK
) {
1553 gdb_error(connection
, retval
);
1554 gdb_connection
->mem_write_error
= false;
1556 gdb_put_packet(connection
, "OK", 2);
1563 static int gdb_step_continue_packet(struct connection
*connection
,
1564 char const *packet
, int packet_size
)
1566 struct target
*target
= get_target_from_connection(connection
);
1568 uint64_t address
= 0x0;
1569 int retval
= ERROR_OK
;
1573 if (packet_size
> 1)
1574 address
= strtoull(packet
+ 1, NULL
, 16);
1578 gdb_running_type
= packet
[0];
1579 if (packet
[0] == 'c') {
1580 LOG_DEBUG("continue");
1581 /* resume at current address, don't handle breakpoints, not debugging */
1582 retval
= target_resume(target
, current
, address
, 0, 0);
1583 } else if (packet
[0] == 's') {
1585 /* step at current or address, don't handle breakpoints */
1586 retval
= target_step(target
, current
, address
, 0);
1591 static int gdb_breakpoint_watchpoint_packet(struct connection
*connection
,
1592 char const *packet
, int packet_size
)
1594 struct target
*target
= get_target_from_connection(connection
);
1596 enum breakpoint_type bp_type
= BKPT_SOFT
/* dummy init to avoid warning */;
1597 enum watchpoint_rw wp_type
= WPT_READ
/* dummy init to avoid warning */;
1605 type
= strtoul(packet
+ 1, &separator
, 16);
1607 if (type
== 0) /* memory breakpoint */
1608 bp_type
= BKPT_SOFT
;
1609 else if (type
== 1) /* hardware breakpoint */
1610 bp_type
= BKPT_HARD
;
1611 else if (type
== 2) /* write watchpoint */
1612 wp_type
= WPT_WRITE
;
1613 else if (type
== 3) /* read watchpoint */
1615 else if (type
== 4) /* access watchpoint */
1616 wp_type
= WPT_ACCESS
;
1618 LOG_ERROR("invalid gdb watch/breakpoint type(%d), dropping connection", type
);
1619 return ERROR_SERVER_REMOTE_CLOSED
;
1622 if (gdb_breakpoint_override
&& ((bp_type
== BKPT_SOFT
) || (bp_type
== BKPT_HARD
)))
1623 bp_type
= gdb_breakpoint_override_type
;
1625 if (*separator
!= ',') {
1626 LOG_ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
1627 return ERROR_SERVER_REMOTE_CLOSED
;
1630 address
= strtoull(separator
+ 1, &separator
, 16);
1632 if (*separator
!= ',') {
1633 LOG_ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
1634 return ERROR_SERVER_REMOTE_CLOSED
;
1637 size
= strtoul(separator
+ 1, &separator
, 16);
1642 if (packet
[0] == 'Z') {
1643 retval
= breakpoint_add(target
, address
, size
, bp_type
);
1644 if (retval
!= ERROR_OK
) {
1645 retval
= gdb_error(connection
, retval
);
1646 if (retval
!= ERROR_OK
)
1649 gdb_put_packet(connection
, "OK", 2);
1651 breakpoint_remove(target
, address
);
1652 gdb_put_packet(connection
, "OK", 2);
1659 if (packet
[0] == 'Z') {
1660 retval
= watchpoint_add(target
, address
, size
, wp_type
, 0, 0xffffffffu
);
1661 if (retval
!= ERROR_OK
) {
1662 retval
= gdb_error(connection
, retval
);
1663 if (retval
!= ERROR_OK
)
1666 gdb_put_packet(connection
, "OK", 2);
1668 watchpoint_remove(target
, address
);
1669 gdb_put_packet(connection
, "OK", 2);
1680 /* print out a string and allocate more space as needed,
1681 * mainly used for XML at this point
1683 static void xml_printf(int *retval
, char **xml
, int *pos
, int *size
,
1684 const char *fmt
, ...)
1686 if (*retval
!= ERROR_OK
)
1691 if ((*xml
== NULL
) || (!first
)) {
1692 /* start by 0 to exercise all the code paths.
1693 * Need minimum 2 bytes to fit 1 char and 0 terminator. */
1695 *size
= *size
* 2 + 2;
1697 *xml
= realloc(*xml
, *size
);
1701 *retval
= ERROR_SERVER_REMOTE_CLOSED
;
1709 ret
= vsnprintf(*xml
+ *pos
, *size
- *pos
, fmt
, ap
);
1711 if ((ret
> 0) && ((ret
+ 1) < *size
- *pos
)) {
1715 /* there was just enough or not enough space, allocate more. */
1720 static int decode_xfer_read(char const *buf
, char **annex
, int *ofs
, unsigned int *len
)
1722 /* Locate the annex. */
1723 const char *annex_end
= strchr(buf
, ':');
1724 if (annex_end
== NULL
)
1727 /* After the read marker and annex, qXfer looks like a
1728 * traditional 'm' packet. */
1730 *ofs
= strtoul(annex_end
+ 1, &separator
, 16);
1732 if (*separator
!= ',')
1735 *len
= strtoul(separator
+ 1, NULL
, 16);
1737 /* Extract the annex if needed */
1738 if (annex
!= NULL
) {
1739 *annex
= strndup(buf
, annex_end
- buf
);
1747 static int compare_bank(const void *a
, const void *b
)
1749 struct flash_bank
*b1
, *b2
;
1750 b1
= *((struct flash_bank
**)a
);
1751 b2
= *((struct flash_bank
**)b
);
1753 if (b1
->base
== b2
->base
)
1755 else if (b1
->base
> b2
->base
)
1761 static int gdb_memory_map(struct connection
*connection
,
1762 char const *packet
, int packet_size
)
1764 /* We get away with only specifying flash here. Regions that are not
1765 * specified are treated as if we provided no memory map(if not we
1766 * could detect the holes and mark them as RAM).
1767 * Normally we only execute this code once, but no big deal if we
1768 * have to regenerate it a couple of times.
1771 struct target
*target
= get_target_from_connection(connection
);
1772 struct flash_bank
*p
;
1776 int retval
= ERROR_OK
;
1777 struct flash_bank
**banks
;
1781 uint32_t ram_start
= 0;
1783 int target_flash_banks
= 0;
1785 /* skip command character */
1788 offset
= strtoul(packet
, &separator
, 16);
1789 length
= strtoul(separator
+ 1, &separator
, 16);
1791 xml_printf(&retval
, &xml
, &pos
, &size
, "<memory-map>\n");
1793 /* Sort banks in ascending order. We need to report non-flash
1794 * memory as ram (or rather read/write) by default for GDB, since
1795 * it has no concept of non-cacheable read/write memory (i/o etc).
1797 * FIXME Most non-flash addresses are *NOT* RAM! Don't lie.
1798 * Current versions of GDB assume unlisted addresses are RAM...
1800 banks
= malloc(sizeof(struct flash_bank
*)*flash_get_bank_count());
1802 for (i
= 0; i
< flash_get_bank_count(); i
++) {
1803 p
= get_flash_bank_by_num_noprobe(i
);
1804 if (p
->target
!= target
)
1806 retval
= get_flash_bank_by_num(i
, &p
);
1807 if (retval
!= ERROR_OK
) {
1809 gdb_error(connection
, retval
);
1812 banks
[target_flash_banks
++] = p
;
1815 qsort(banks
, target_flash_banks
, sizeof(struct flash_bank
*),
1818 for (i
= 0; i
< target_flash_banks
; i
++) {
1820 unsigned sector_size
= 0;
1826 if (ram_start
< p
->base
)
1827 xml_printf(&retval
, &xml
, &pos
, &size
,
1828 "<memory type=\"ram\" start=\"0x%x\" "
1829 "length=\"0x%x\"/>\n",
1830 ram_start
, p
->base
- ram_start
);
1832 /* Report adjacent groups of same-size sectors. So for
1833 * example top boot CFI flash will list an initial region
1834 * with several large sectors (maybe 128KB) and several
1835 * smaller ones at the end (maybe 32KB). STR7 will have
1836 * regions with 8KB, 32KB, and 64KB sectors; etc.
1838 for (j
= 0; j
< p
->num_sectors
; j
++) {
1841 /* Maybe start a new group of sectors. */
1842 if (sector_size
== 0) {
1843 start
= p
->base
+ p
->sectors
[j
].offset
;
1844 xml_printf(&retval
, &xml
, &pos
, &size
,
1845 "<memory type=\"flash\" "
1848 sector_size
= p
->sectors
[j
].size
;
1851 /* Does this finish a group of sectors?
1852 * If not, continue an already-started group.
1854 if (j
== p
->num_sectors
- 1)
1855 group_len
= (p
->base
+ p
->size
) - start
;
1856 else if (p
->sectors
[j
+ 1].size
!= sector_size
)
1857 group_len
= p
->base
+ p
->sectors
[j
+ 1].offset
1862 xml_printf(&retval
, &xml
, &pos
, &size
,
1863 "length=\"0x%x\">\n"
1864 "<property name=\"blocksize\">"
1872 ram_start
= p
->base
+ p
->size
;
1876 xml_printf(&retval
, &xml
, &pos
, &size
,
1877 "<memory type=\"ram\" start=\"0x%x\" "
1878 "length=\"0x%x\"/>\n",
1879 ram_start
, 0-ram_start
);
1880 /* ELSE a flash chip could be at the very end of the 32 bit address
1881 * space, in which case ram_start will be precisely 0
1887 xml_printf(&retval
, &xml
, &pos
, &size
, "</memory-map>\n");
1889 if (retval
!= ERROR_OK
) {
1890 gdb_error(connection
, retval
);
1894 if (offset
+ length
> pos
)
1895 length
= pos
- offset
;
1897 char *t
= malloc(length
+ 1);
1899 memcpy(t
+ 1, xml
+ offset
, length
);
1900 gdb_put_packet(connection
, t
, length
+ 1);
1907 static const char *gdb_get_reg_type_name(enum reg_type type
)
1914 case REG_TYPE_INT16
:
1916 case REG_TYPE_INT32
:
1918 case REG_TYPE_INT64
:
1920 case REG_TYPE_INT128
:
1922 case REG_TYPE_UINT8
:
1924 case REG_TYPE_UINT16
:
1926 case REG_TYPE_UINT32
:
1928 case REG_TYPE_UINT64
:
1930 case REG_TYPE_UINT128
:
1932 case REG_TYPE_CODE_PTR
:
1934 case REG_TYPE_DATA_PTR
:
1936 case REG_TYPE_FLOAT
:
1938 case REG_TYPE_IEEE_SINGLE
:
1939 return "ieee_single";
1940 case REG_TYPE_IEEE_DOUBLE
:
1941 return "ieee_double";
1942 case REG_TYPE_ARCH_DEFINED
:
1943 return "int"; /* return arbitrary string to avoid compile warning. */
1946 return "int"; /* "int" as default value */
1949 static int gdb_generate_reg_type_description(struct target
*target
,
1950 char **tdesc
, int *pos
, int *size
, struct reg_data_type
*type
)
1952 int retval
= ERROR_OK
;
1954 if (type
->type_class
== REG_TYPE_CLASS_VECTOR
) {
1955 /* <vector id="id" type="type" count="count"/> */
1956 xml_printf(&retval
, tdesc
, pos
, size
,
1957 "<vector id=\"%s\" type=\"%s\" count=\"%d\"/>\n",
1958 type
->id
, type
->reg_type_vector
->type
->id
,
1959 type
->reg_type_vector
->count
);
1961 } else if (type
->type_class
== REG_TYPE_CLASS_UNION
) {
1963 * <field name="name" type="type"/> ...
1965 xml_printf(&retval
, tdesc
, pos
, size
,
1966 "<union id=\"%s\">\n",
1969 struct reg_data_type_union_field
*field
;
1970 field
= type
->reg_type_union
->fields
;
1971 while (field
!= NULL
) {
1972 xml_printf(&retval
, tdesc
, pos
, size
,
1973 "<field name=\"%s\" type=\"%s\"/>\n",
1974 field
->name
, field
->type
->id
);
1976 field
= field
->next
;
1979 xml_printf(&retval
, tdesc
, pos
, size
,
1982 } else if (type
->type_class
== REG_TYPE_CLASS_STRUCT
) {
1983 struct reg_data_type_struct_field
*field
;
1984 field
= type
->reg_type_struct
->fields
;
1986 if (field
->use_bitfields
) {
1987 /* <struct id="id" size="size">
1988 * <field name="name" start="start" end="end"/> ...
1990 xml_printf(&retval
, tdesc
, pos
, size
,
1991 "<struct id=\"%s\" size=\"%d\">\n",
1992 type
->id
, type
->reg_type_struct
->size
);
1993 while (field
!= NULL
) {
1994 xml_printf(&retval
, tdesc
, pos
, size
,
1995 "<field name=\"%s\" start=\"%d\" end=\"%d\"/>\n",
1996 field
->name
, field
->bitfield
->start
,
1997 field
->bitfield
->end
);
1999 field
= field
->next
;
2003 * <field name="name" type="type"/> ...
2005 xml_printf(&retval
, tdesc
, pos
, size
,
2006 "<struct id=\"%s\">\n",
2008 while (field
!= NULL
) {
2009 xml_printf(&retval
, tdesc
, pos
, size
,
2010 "<field name=\"%s\" type=\"%s\"/>\n",
2011 field
->name
, field
->type
->id
);
2013 field
= field
->next
;
2017 xml_printf(&retval
, tdesc
, pos
, size
,
2020 } else if (type
->type_class
== REG_TYPE_CLASS_FLAGS
) {
2021 /* <flags id="id" size="size">
2022 * <field name="name" start="start" end="end"/> ...
2024 xml_printf(&retval
, tdesc
, pos
, size
,
2025 "<flags id=\"%s\" size=\"%d\">\n",
2026 type
->id
, type
->reg_type_flags
->size
);
2028 struct reg_data_type_flags_field
*field
;
2029 field
= type
->reg_type_flags
->fields
;
2030 while (field
!= NULL
) {
2031 xml_printf(&retval
, tdesc
, pos
, size
,
2032 "<field name=\"%s\" start=\"%d\" end=\"%d\"/>\n",
2033 field
->name
, field
->bitfield
->start
, field
->bitfield
->end
);
2035 field
= field
->next
;
2038 xml_printf(&retval
, tdesc
, pos
, size
,
2046 /* Get a list of available target registers features. feature_list must
2047 * be freed by caller.
2049 static int get_reg_features_list(struct target
*target
, char const **feature_list
[], int *feature_list_size
,
2050 struct reg
**reg_list
, int reg_list_size
)
2054 /* Start with only one element */
2055 *feature_list
= calloc(1, sizeof(char *));
2057 for (int i
= 0; i
< reg_list_size
; i
++) {
2058 if (reg_list
[i
]->exist
== false)
2061 if (reg_list
[i
]->feature
!= NULL
2062 && reg_list
[i
]->feature
->name
!= NULL
2063 && (strcmp(reg_list
[i
]->feature
->name
, ""))) {
2064 /* We found a feature, check if the feature is already in the
2065 * table. If not, allocate a new entry for the table and
2066 * put the new feature in it.
2068 for (int j
= 0; j
< (tbl_sz
+ 1); j
++) {
2069 if (!((*feature_list
)[j
])) {
2070 (*feature_list
)[tbl_sz
++] = reg_list
[i
]->feature
->name
;
2071 *feature_list
= realloc(*feature_list
, sizeof(char *) * (tbl_sz
+ 1));
2072 (*feature_list
)[tbl_sz
] = NULL
;
2075 if (!strcmp((*feature_list
)[j
], reg_list
[i
]->feature
->name
))
2082 if (feature_list_size
)
2083 *feature_list_size
= tbl_sz
;
2088 static int gdb_generate_target_description(struct target
*target
, char **tdesc_out
)
2090 int retval
= ERROR_OK
;
2091 struct reg
**reg_list
= NULL
;
2093 char const **features
= NULL
;
2094 int feature_list_size
= 0;
2099 retval
= target_get_gdb_reg_list(target
, ®_list
,
2100 ®_list_size
, REG_CLASS_ALL
);
2102 if (retval
!= ERROR_OK
) {
2103 LOG_ERROR("get register list failed");
2104 retval
= ERROR_FAIL
;
2108 if (reg_list_size
<= 0) {
2109 LOG_ERROR("get register list failed");
2110 retval
= ERROR_FAIL
;
2114 /* Get a list of available target registers features */
2115 retval
= get_reg_features_list(target
, &features
, &feature_list_size
, reg_list
, reg_list_size
);
2116 if (retval
!= ERROR_OK
) {
2117 LOG_ERROR("Can't get the registers feature list");
2118 retval
= ERROR_FAIL
;
2122 /* If we found some features associated with registers, create sections */
2123 int current_feature
= 0;
2125 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2126 "<?xml version=\"1.0\"?>\n"
2127 "<!DOCTYPE target SYSTEM \"gdb-target.dtd\">\n"
2128 "<target version=\"1.0\">\n");
2130 /* generate target description according to register list */
2131 if (features
!= NULL
) {
2132 while (features
[current_feature
]) {
2134 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2135 "<feature name=\"%s\">\n",
2136 features
[current_feature
]);
2139 for (i
= 0; i
< reg_list_size
; i
++) {
2141 if (reg_list
[i
]->exist
== false)
2144 if (strcmp(reg_list
[i
]->feature
->name
, features
[current_feature
]))
2147 const char *type_str
;
2148 if (reg_list
[i
]->reg_data_type
!= NULL
) {
2149 if (reg_list
[i
]->reg_data_type
->type
== REG_TYPE_ARCH_DEFINED
) {
2150 /* generate <type... first, if there are architecture-defined types. */
2151 gdb_generate_reg_type_description(target
, &tdesc
, &pos
, &size
,
2152 reg_list
[i
]->reg_data_type
);
2154 type_str
= reg_list
[i
]->reg_data_type
->id
;
2156 /* predefined type */
2157 type_str
= gdb_get_reg_type_name(
2158 reg_list
[i
]->reg_data_type
->type
);
2161 /* Default type is "int" */
2165 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2166 "<reg name=\"%s\"", reg_list
[i
]->name
);
2167 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2168 " bitsize=\"%d\"", reg_list
[i
]->size
);
2169 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2170 " regnum=\"%d\"", reg_list
[i
]->number
);
2171 if (reg_list
[i
]->caller_save
)
2172 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2173 " save-restore=\"yes\"");
2175 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2176 " save-restore=\"no\"");
2178 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2179 " type=\"%s\"", type_str
);
2181 if (reg_list
[i
]->group
!= NULL
)
2182 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2183 " group=\"%s\"", reg_list
[i
]->group
);
2185 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2189 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2196 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2203 if (retval
== ERROR_OK
)
2211 static int gdb_get_target_description_chunk(struct target
*target
, struct target_desc_format
*target_desc
,
2212 char **chunk
, int32_t offset
, uint32_t length
)
2214 if (target_desc
== NULL
) {
2215 LOG_ERROR("Unable to Generate Target Description");
2219 char *tdesc
= target_desc
->tdesc
;
2220 uint32_t tdesc_length
= target_desc
->tdesc_length
;
2222 if (tdesc
== NULL
) {
2223 int retval
= gdb_generate_target_description(target
, &tdesc
);
2224 if (retval
!= ERROR_OK
) {
2225 LOG_ERROR("Unable to Generate Target Description");
2229 tdesc_length
= strlen(tdesc
);
2234 if (length
< (tdesc_length
- offset
))
2235 transfer_type
= 'm';
2237 transfer_type
= 'l';
2239 *chunk
= malloc(length
+ 2);
2240 if (*chunk
== NULL
) {
2241 LOG_ERROR("Unable to allocate memory");
2245 (*chunk
)[0] = transfer_type
;
2246 if (transfer_type
== 'm') {
2247 strncpy((*chunk
) + 1, tdesc
+ offset
, length
);
2248 (*chunk
)[1 + length
] = '\0';
2250 strncpy((*chunk
) + 1, tdesc
+ offset
, tdesc_length
- offset
);
2251 (*chunk
)[1 + (tdesc_length
- offset
)] = '\0';
2253 /* After gdb-server sends out last chunk, invalidate tdesc. */
2259 target_desc
->tdesc
= tdesc
;
2260 target_desc
->tdesc_length
= tdesc_length
;
2265 static int gdb_target_description_supported(struct target
*target
, int *supported
)
2267 int retval
= ERROR_OK
;
2268 struct reg
**reg_list
= NULL
;
2269 int reg_list_size
= 0;
2270 char const **features
= NULL
;
2271 int feature_list_size
= 0;
2273 retval
= target_get_gdb_reg_list(target
, ®_list
,
2274 ®_list_size
, REG_CLASS_ALL
);
2275 if (retval
!= ERROR_OK
) {
2276 LOG_ERROR("get register list failed");
2280 if (reg_list_size
<= 0) {
2281 LOG_ERROR("get register list failed");
2282 retval
= ERROR_FAIL
;
2286 /* Get a list of available target registers features */
2287 retval
= get_reg_features_list(target
, &features
, &feature_list_size
, reg_list
, reg_list_size
);
2288 if (retval
!= ERROR_OK
) {
2289 LOG_ERROR("Can't get the registers feature list");
2294 if (feature_list_size
)
2308 static int gdb_generate_thread_list(struct target
*target
, char **thread_list_out
)
2310 struct rtos
*rtos
= target
->rtos
;
2311 int retval
= ERROR_OK
;
2312 char *thread_list
= NULL
;
2316 xml_printf(&retval
, &thread_list
, &pos
, &size
,
2317 "<?xml version=\"1.0\"?>\n"
2321 for (int i
= 0; i
< rtos
->thread_count
; i
++) {
2322 struct thread_detail
*thread_detail
= &rtos
->thread_details
[i
];
2324 if (!thread_detail
->exists
)
2327 xml_printf(&retval
, &thread_list
, &pos
, &size
,
2328 "<thread id=\"%" PRIx64
"\">", thread_detail
->threadid
);
2330 if (thread_detail
->thread_name_str
!= NULL
)
2331 xml_printf(&retval
, &thread_list
, &pos
, &size
,
2332 "Name: %s", thread_detail
->thread_name_str
);
2334 if (thread_detail
->extra_info_str
!= NULL
) {
2335 if (thread_detail
->thread_name_str
!= NULL
)
2336 xml_printf(&retval
, &thread_list
, &pos
, &size
,
2338 xml_printf(&retval
, &thread_list
, &pos
, &size
,
2339 thread_detail
->extra_info_str
);
2342 xml_printf(&retval
, &thread_list
, &pos
, &size
,
2347 xml_printf(&retval
, &thread_list
, &pos
, &size
,
2350 if (retval
== ERROR_OK
)
2351 *thread_list_out
= thread_list
;
2358 static int gdb_get_thread_list_chunk(struct target
*target
, char **thread_list
,
2359 char **chunk
, int32_t offset
, uint32_t length
)
2361 if (*thread_list
== NULL
) {
2362 int retval
= gdb_generate_thread_list(target
, thread_list
);
2363 if (retval
!= ERROR_OK
) {
2364 LOG_ERROR("Unable to Generate Thread List");
2369 size_t thread_list_length
= strlen(*thread_list
);
2372 length
= MIN(length
, thread_list_length
- offset
);
2373 if (length
< (thread_list_length
- offset
))
2374 transfer_type
= 'm';
2376 transfer_type
= 'l';
2378 *chunk
= malloc(length
+ 2);
2379 if (*chunk
== NULL
) {
2380 LOG_ERROR("Unable to allocate memory");
2384 (*chunk
)[0] = transfer_type
;
2385 strncpy((*chunk
) + 1, (*thread_list
) + offset
, length
);
2386 (*chunk
)[1 + length
] = '\0';
2388 /* After gdb-server sends out last chunk, invalidate thread list. */
2389 if (transfer_type
== 'l') {
2391 *thread_list
= NULL
;
2397 static int gdb_query_packet(struct connection
*connection
,
2398 char const *packet
, int packet_size
)
2400 struct command_context
*cmd_ctx
= connection
->cmd_ctx
;
2401 struct gdb_connection
*gdb_connection
= connection
->priv
;
2402 struct target
*target
= get_target_from_connection(connection
);
2404 if (strncmp(packet
, "qRcmd,", 6) == 0) {
2405 if (packet_size
> 6) {
2407 cmd
= malloc((packet_size
- 6) / 2 + 1);
2408 size_t len
= unhexify((uint8_t *)cmd
, packet
+ 6, (packet_size
- 6) / 2);
2411 /* We want to print all debug output to GDB connection */
2412 log_add_callback(gdb_log_callback
, connection
);
2413 target_call_timer_callbacks_now();
2414 /* some commands need to know the GDB connection, make note of current
2415 * GDB connection. */
2416 current_gdb_connection
= gdb_connection
;
2417 command_run_line(cmd_ctx
, cmd
);
2418 current_gdb_connection
= NULL
;
2419 target_call_timer_callbacks_now();
2420 log_remove_callback(gdb_log_callback
, connection
);
2423 gdb_put_packet(connection
, "OK", 2);
2425 } else if (strncmp(packet
, "qCRC:", 5) == 0) {
2426 if (packet_size
> 5) {
2431 target_addr_t addr
= 0;
2434 /* skip command character */
2437 addr
= strtoull(packet
, &separator
, 16);
2439 if (*separator
!= ',') {
2440 LOG_ERROR("incomplete read memory packet received, dropping connection");
2441 return ERROR_SERVER_REMOTE_CLOSED
;
2444 len
= strtoul(separator
+ 1, NULL
, 16);
2446 retval
= target_checksum_memory(target
, addr
, len
, &checksum
);
2448 if (retval
== ERROR_OK
) {
2449 snprintf(gdb_reply
, 10, "C%8.8" PRIx32
"", checksum
);
2450 gdb_put_packet(connection
, gdb_reply
, 9);
2452 retval
= gdb_error(connection
, retval
);
2453 if (retval
!= ERROR_OK
)
2459 } else if (strncmp(packet
, "qSupported", 10) == 0) {
2460 /* we currently support packet size and qXfer:memory-map:read (if enabled)
2461 * qXfer:features:read is supported for some targets */
2462 int retval
= ERROR_OK
;
2463 char *buffer
= NULL
;
2466 int gdb_target_desc_supported
= 0;
2468 /* we need to test that the target supports target descriptions */
2469 retval
= gdb_target_description_supported(target
, &gdb_target_desc_supported
);
2470 if (retval
!= ERROR_OK
) {
2471 LOG_INFO("Failed detecting Target Description Support, disabling");
2472 gdb_target_desc_supported
= 0;
2475 /* support may be disabled globally */
2476 if (gdb_use_target_description
== 0) {
2477 if (gdb_target_desc_supported
)
2478 LOG_WARNING("Target Descriptions Supported, but disabled");
2479 gdb_target_desc_supported
= 0;
2486 "PacketSize=%x;qXfer:memory-map:read%c;qXfer:features:read%c;qXfer:threads:read+;QStartNoAckMode+;vContSupported+",
2487 (GDB_BUFFER_SIZE
- 1),
2488 ((gdb_use_memory_map
== 1) && (flash_get_bank_count() > 0)) ? '+' : '-',
2489 (gdb_target_desc_supported
== 1) ? '+' : '-');
2491 if (retval
!= ERROR_OK
) {
2492 gdb_send_error(connection
, 01);
2496 gdb_put_packet(connection
, buffer
, strlen(buffer
));
2500 } else if ((strncmp(packet
, "qXfer:memory-map:read::", 23) == 0)
2501 && (flash_get_bank_count() > 0))
2502 return gdb_memory_map(connection
, packet
, packet_size
);
2503 else if (strncmp(packet
, "qXfer:features:read:", 20) == 0) {
2505 int retval
= ERROR_OK
;
2508 unsigned int length
;
2510 /* skip command character */
2513 if (decode_xfer_read(packet
, NULL
, &offset
, &length
) < 0) {
2514 gdb_send_error(connection
, 01);
2518 /* Target should prepare correct target description for annex.
2519 * The first character of returned xml is 'm' or 'l'. 'm' for
2520 * there are *more* chunks to transfer. 'l' for it is the *last*
2521 * chunk of target description.
2523 retval
= gdb_get_target_description_chunk(target
, &gdb_connection
->target_desc
,
2524 &xml
, offset
, length
);
2525 if (retval
!= ERROR_OK
) {
2526 gdb_error(connection
, retval
);
2530 gdb_put_packet(connection
, xml
, strlen(xml
));
2534 } else if (strncmp(packet
, "qXfer:threads:read:", 19) == 0) {
2536 int retval
= ERROR_OK
;
2539 unsigned int length
;
2541 /* skip command character */
2544 if (decode_xfer_read(packet
, NULL
, &offset
, &length
) < 0) {
2545 gdb_send_error(connection
, 01);
2549 /* Target should prepare correct thread list for annex.
2550 * The first character of returned xml is 'm' or 'l'. 'm' for
2551 * there are *more* chunks to transfer. 'l' for it is the *last*
2552 * chunk of target description.
2554 retval
= gdb_get_thread_list_chunk(target
, &gdb_connection
->thread_list
,
2555 &xml
, offset
, length
);
2556 if (retval
!= ERROR_OK
) {
2557 gdb_error(connection
, retval
);
2561 gdb_put_packet(connection
, xml
, strlen(xml
));
2565 } else if (strncmp(packet
, "QStartNoAckMode", 15) == 0) {
2566 gdb_connection
->noack_mode
= 1;
2567 gdb_put_packet(connection
, "OK", 2);
2571 gdb_put_packet(connection
, "", 0);
2575 static bool gdb_handle_vcont_packet(struct connection
*connection
, const char *packet
, int packet_size
)
2577 struct gdb_connection
*gdb_connection
= connection
->priv
;
2578 struct target
*target
= get_target_from_connection(connection
);
2579 const char *parse
= packet
;
2582 /* query for vCont supported */
2583 if (parse
[0] == '?') {
2584 if (target
->type
->step
!= NULL
) {
2585 /* gdb doesn't accept c without C and s without S */
2586 gdb_put_packet(connection
, "vCont;c;C;s;S", 13);
2592 if (parse
[0] == ';') {
2597 /* simple case, a continue packet */
2598 if (parse
[0] == 'c') {
2599 LOG_DEBUG("target %s continue", target_name(target
));
2600 log_add_callback(gdb_log_callback
, connection
);
2601 retval
= target_resume(target
, 1, 0, 0, 0);
2602 if (retval
== ERROR_OK
) {
2603 gdb_connection
->frontend_state
= TARGET_RUNNING
;
2604 target_call_event_callbacks(target
, TARGET_EVENT_GDB_START
);
2609 /* single-step or step-over-breakpoint */
2610 if (parse
[0] == 's') {
2611 if (strncmp(parse
, "s:", 2) == 0) {
2612 int handle_breakpoint
= 1;
2613 struct target
*ct
= target
;
2620 thread_id
= strtoll(parse
, &endp
, 16);
2622 packet_size
-= endp
- parse
;
2626 if (target
->rtos
!= NULL
)
2627 target
->rtos
->gdb_target_for_threadid(connection
, thread_id
, &ct
);
2629 if (parse
[0] == ';') {
2633 if (parse
[0] == 'c') {
2637 handle_breakpoint
= 0;
2641 LOG_DEBUG("target %s single-step thread %"PRId64
, target_name(ct
), thread_id
);
2642 retval
= target_step(ct
, 1, 0, handle_breakpoint
);
2643 if (retval
== ERROR_OK
) {
2644 gdb_signal_reply(target
, connection
);
2645 /* stop forwarding log packets! */
2646 log_remove_callback(gdb_log_callback
, connection
);
2648 if (retval
== ERROR_TARGET_TIMEOUT
) {
2649 gdb_connection
->frontend_state
= TARGET_RUNNING
;
2650 target_call_event_callbacks(ct
, TARGET_EVENT_GDB_START
);
2653 LOG_ERROR("Unknown vCont packet");
2662 static int gdb_v_packet(struct connection
*connection
,
2663 char const *packet
, int packet_size
)
2665 struct gdb_connection
*gdb_connection
= connection
->priv
;
2666 struct target
*target
;
2669 target
= get_target_from_connection(connection
);
2671 if (strncmp(packet
, "vCont", 5) == 0) {
2677 handled
= gdb_handle_vcont_packet(connection
, packet
, packet_size
);
2679 gdb_put_packet(connection
, "", 0);
2684 /* if flash programming disabled - send a empty reply */
2686 if (gdb_flash_program
== 0) {
2687 gdb_put_packet(connection
, "", 0);
2691 if (strncmp(packet
, "vFlashErase:", 12) == 0) {
2693 unsigned long length
;
2695 char const *parse
= packet
+ 12;
2696 if (*parse
== '\0') {
2697 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2698 return ERROR_SERVER_REMOTE_CLOSED
;
2701 addr
= strtoul(parse
, (char **)&parse
, 16);
2703 if (*(parse
++) != ',' || *parse
== '\0') {
2704 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2705 return ERROR_SERVER_REMOTE_CLOSED
;
2708 length
= strtoul(parse
, (char **)&parse
, 16);
2710 if (*parse
!= '\0') {
2711 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2712 return ERROR_SERVER_REMOTE_CLOSED
;
2715 /* assume all sectors need erasing - stops any problems
2716 * when flash_write is called multiple times */
2719 /* perform any target specific operations before the erase */
2720 target_call_event_callbacks(target
,
2721 TARGET_EVENT_GDB_FLASH_ERASE_START
);
2723 /* vFlashErase:addr,length messages require region start and
2724 * end to be "block" aligned ... if padding is ever needed,
2725 * GDB will have become dangerously confused.
2727 result
= flash_erase_address_range(target
, false, addr
,
2730 /* perform any target specific operations after the erase */
2731 target_call_event_callbacks(target
,
2732 TARGET_EVENT_GDB_FLASH_ERASE_END
);
2735 if (result
!= ERROR_OK
) {
2736 /* GDB doesn't evaluate the actual error number returned,
2737 * treat a failed erase as an I/O error
2739 gdb_send_error(connection
, EIO
);
2740 LOG_ERROR("flash_erase returned %i", result
);
2742 gdb_put_packet(connection
, "OK", 2);
2747 if (strncmp(packet
, "vFlashWrite:", 12) == 0) {
2750 unsigned long length
;
2751 char const *parse
= packet
+ 12;
2753 if (*parse
== '\0') {
2754 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2755 return ERROR_SERVER_REMOTE_CLOSED
;
2757 addr
= strtoul(parse
, (char **)&parse
, 16);
2758 if (*(parse
++) != ':') {
2759 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2760 return ERROR_SERVER_REMOTE_CLOSED
;
2762 length
= packet_size
- (parse
- packet
);
2764 /* create a new image if there isn't already one */
2765 if (gdb_connection
->vflash_image
== NULL
) {
2766 gdb_connection
->vflash_image
= malloc(sizeof(struct image
));
2767 image_open(gdb_connection
->vflash_image
, "", "build");
2770 /* create new section with content from packet buffer */
2771 retval
= image_add_section(gdb_connection
->vflash_image
,
2772 addr
, length
, 0x0, (uint8_t const *)parse
);
2773 if (retval
!= ERROR_OK
)
2776 gdb_put_packet(connection
, "OK", 2);
2781 if (strncmp(packet
, "vFlashDone", 10) == 0) {
2784 /* process the flashing buffer. No need to erase as GDB
2785 * always issues a vFlashErase first. */
2786 target_call_event_callbacks(target
,
2787 TARGET_EVENT_GDB_FLASH_WRITE_START
);
2788 result
= flash_write(target
, gdb_connection
->vflash_image
,
2790 target_call_event_callbacks(target
,
2791 TARGET_EVENT_GDB_FLASH_WRITE_END
);
2792 if (result
!= ERROR_OK
) {
2793 if (result
== ERROR_FLASH_DST_OUT_OF_BANK
)
2794 gdb_put_packet(connection
, "E.memtype", 9);
2796 gdb_send_error(connection
, EIO
);
2798 LOG_DEBUG("wrote %u bytes from vFlash image to flash", (unsigned)written
);
2799 gdb_put_packet(connection
, "OK", 2);
2802 image_close(gdb_connection
->vflash_image
);
2803 free(gdb_connection
->vflash_image
);
2804 gdb_connection
->vflash_image
= NULL
;
2809 gdb_put_packet(connection
, "", 0);
2813 static int gdb_detach(struct connection
*connection
)
2815 target_call_event_callbacks(get_target_from_connection(connection
),
2816 TARGET_EVENT_GDB_DETACH
);
2818 return gdb_put_packet(connection
, "OK", 2);
2821 /* The format of 'F' response packet is
2822 * Fretcode,errno,Ctrl-C flag;call-specific attachment
2824 static int gdb_fileio_response_packet(struct connection
*connection
,
2825 char const *packet
, int packet_size
)
2827 struct target
*target
= get_target_from_connection(connection
);
2829 char *parsing_point
;
2830 int fileio_retcode
= strtoul(packet
+ 1, &separator
, 16);
2831 int fileio_errno
= 0;
2832 bool fileio_ctrl_c
= false;
2837 if (*separator
== ',') {
2838 parsing_point
= separator
+ 1;
2839 fileio_errno
= strtoul(parsing_point
, &separator
, 16);
2840 if (*separator
== ',') {
2841 if (*(separator
+ 1) == 'C') {
2842 /* TODO: process ctrl-c */
2843 fileio_ctrl_c
= true;
2848 LOG_DEBUG("File-I/O response, retcode: 0x%x, errno: 0x%x, ctrl-c: %s",
2849 fileio_retcode
, fileio_errno
, fileio_ctrl_c
? "true" : "false");
2851 retval
= target_gdb_fileio_end(target
, fileio_retcode
, fileio_errno
, fileio_ctrl_c
);
2852 if (retval
!= ERROR_OK
)
2855 /* After File-I/O ends, keep continue or step */
2856 if (gdb_running_type
== 'c')
2857 retval
= target_resume(target
, 1, 0x0, 0, 0);
2858 else if (gdb_running_type
== 's')
2859 retval
= target_step(target
, 1, 0x0, 0);
2861 retval
= ERROR_FAIL
;
2863 if (retval
!= ERROR_OK
)
2869 static void gdb_log_callback(void *priv
, const char *file
, unsigned line
,
2870 const char *function
, const char *string
)
2872 struct connection
*connection
= priv
;
2873 struct gdb_connection
*gdb_con
= connection
->priv
;
2875 if (gdb_con
->busy
) {
2876 /* do not reply this using the O packet */
2880 gdb_output_con(connection
, string
);
2883 static void gdb_sig_halted(struct connection
*connection
)
2886 snprintf(sig_reply
, 4, "T%2.2x", 2);
2887 gdb_put_packet(connection
, sig_reply
, 3);
2890 static int gdb_input_inner(struct connection
*connection
)
2892 /* Do not allocate this on the stack */
2893 static char gdb_packet_buffer
[GDB_BUFFER_SIZE
];
2895 struct target
*target
;
2896 char const *packet
= gdb_packet_buffer
;
2899 struct gdb_connection
*gdb_con
= connection
->priv
;
2900 static int extended_protocol
;
2902 target
= get_target_from_connection(connection
);
2904 /* drain input buffer. If one of the packets fail, then an error
2905 * packet is replied, if applicable.
2907 * This loop will terminate and the error code is returned.
2909 * The calling fn will check if this error is something that
2910 * can be recovered from, or if the connection must be closed.
2912 * If the error is recoverable, this fn is called again to
2913 * drain the rest of the buffer.
2916 packet_size
= GDB_BUFFER_SIZE
-1;
2917 retval
= gdb_get_packet(connection
, gdb_packet_buffer
, &packet_size
);
2918 if (retval
!= ERROR_OK
)
2921 /* terminate with zero */
2922 gdb_packet_buffer
[packet_size
] = '\0';
2924 if (LOG_LEVEL_IS(LOG_LVL_DEBUG
)) {
2925 if (packet
[0] == 'X') {
2926 /* binary packets spew junk into the debug log stream */
2929 for (x
= 0; (x
< 49) && (packet
[x
] != ':'); x
++)
2932 LOG_DEBUG("received packet: '%s:<binary-data>'", buf
);
2934 LOG_DEBUG("received packet: '%s'", packet
);
2937 if (packet_size
> 0) {
2939 switch (packet
[0]) {
2940 case 'T': /* Is thread alive? */
2941 gdb_thread_packet(connection
, packet
, packet_size
);
2943 case 'H': /* Set current thread ( 'c' for step and continue,
2944 * 'g' for all other operations ) */
2945 gdb_thread_packet(connection
, packet
, packet_size
);
2949 retval
= gdb_thread_packet(connection
, packet
, packet_size
);
2950 if (retval
== GDB_THREAD_PACKET_NOT_CONSUMED
)
2951 retval
= gdb_query_packet(connection
, packet
, packet_size
);
2954 retval
= gdb_get_registers_packet(connection
, packet
, packet_size
);
2957 retval
= gdb_set_registers_packet(connection
, packet
, packet_size
);
2960 retval
= gdb_get_register_packet(connection
, packet
, packet_size
);
2963 retval
= gdb_set_register_packet(connection
, packet
, packet_size
);
2966 retval
= gdb_read_memory_packet(connection
, packet
, packet_size
);
2969 retval
= gdb_write_memory_packet(connection
, packet
, packet_size
);
2973 retval
= gdb_breakpoint_watchpoint_packet(connection
, packet
, packet_size
);
2976 gdb_last_signal_packet(connection
, packet
, packet_size
);
2981 gdb_thread_packet(connection
, packet
, packet_size
);
2982 log_add_callback(gdb_log_callback
, connection
);
2984 if (gdb_con
->mem_write_error
) {
2985 LOG_ERROR("Memory write failure!");
2987 /* now that we have reported the memory write error,
2988 * we can clear the condition */
2989 gdb_con
->mem_write_error
= false;
2992 bool nostep
= false;
2993 bool already_running
= false;
2994 if (target
->state
== TARGET_RUNNING
) {
2995 LOG_WARNING("WARNING! The target is already running. "
2996 "All changes GDB did to registers will be discarded! "
2997 "Waiting for target to halt.");
2998 already_running
= true;
2999 } else if (target
->state
!= TARGET_HALTED
) {
3000 LOG_WARNING("The target is not in the halted nor running stated, " \
3001 "stepi/continue ignored.");
3003 } else if ((packet
[0] == 's') && gdb_con
->sync
) {
3004 /* Hmm..... when you issue a continue in GDB, then a "stepi" is
3005 * sent by GDB first to OpenOCD, thus defeating the check to
3006 * make only the single stepping have the sync feature...
3009 LOG_WARNING("stepi ignored. GDB will now fetch the register state " \
3010 "from the target.");
3012 gdb_con
->sync
= false;
3014 if (!already_running
&& nostep
) {
3015 /* Either the target isn't in the halted state, then we can't
3016 * step/continue. This might be early setup, etc.
3018 * Or we want to allow GDB to pick up a fresh set of
3019 * register values without modifying the target state.
3022 gdb_sig_halted(connection
);
3024 /* stop forwarding log packets! */
3025 log_remove_callback(gdb_log_callback
, connection
);
3027 /* We're running/stepping, in which case we can
3028 * forward log output until the target is halted
3030 gdb_con
->frontend_state
= TARGET_RUNNING
;
3031 target_call_event_callbacks(target
, TARGET_EVENT_GDB_START
);
3033 if (!already_running
) {
3034 /* Here we don't want packet processing to stop even if this fails,
3035 * so we use a local variable instead of retval. */
3036 retval
= gdb_step_continue_packet(connection
, packet
, packet_size
);
3037 if (retval
!= ERROR_OK
) {
3038 /* we'll never receive a halted
3039 * condition... issue a false one..
3041 gdb_frontend_halted(target
, connection
);
3048 retval
= gdb_v_packet(connection
, packet
, packet_size
);
3051 retval
= gdb_detach(connection
);
3052 extended_protocol
= 0;
3055 retval
= gdb_write_memory_binary_packet(connection
, packet
, packet_size
);
3056 if (retval
!= ERROR_OK
)
3060 if (extended_protocol
!= 0) {
3061 gdb_con
->attached
= false;
3064 gdb_put_packet(connection
, "OK", 2);
3065 return ERROR_SERVER_REMOTE_CLOSED
;
3067 /* handle extended remote protocol */
3068 extended_protocol
= 1;
3069 gdb_put_packet(connection
, "OK", 2);
3072 /* handle extended restart packet */
3073 breakpoint_clear_target(target
);
3074 watchpoint_clear_target(target
);
3075 command_run_linef(connection
->cmd_ctx
, "ocd_gdb_restart %s",
3076 target_name(target
));
3077 /* set connection as attached after reset */
3078 gdb_con
->attached
= true;
3079 /* info rtos parts */
3080 gdb_thread_packet(connection
, packet
, packet_size
);
3084 /* packet supported only by smp target i.e cortex_a.c*/
3085 /* handle smp packet replying coreid played to gbd */
3086 gdb_read_smp_packet(connection
, packet
, packet_size
);
3090 /* packet supported only by smp target i.e cortex_a.c */
3091 /* handle smp packet setting coreid to be played at next
3093 gdb_write_smp_packet(connection
, packet
, packet_size
);
3097 /* File-I/O extension */
3098 /* After gdb uses host-side syscall to complete target file
3099 * I/O, gdb sends host-side syscall return value to target
3101 * The format of 'F' response packet is
3102 * Fretcode,errno,Ctrl-C flag;call-specific attachment
3104 gdb_con
->frontend_state
= TARGET_RUNNING
;
3105 log_add_callback(gdb_log_callback
, connection
);
3106 gdb_fileio_response_packet(connection
, packet
, packet_size
);
3110 /* ignore unknown packets */
3111 LOG_DEBUG("ignoring 0x%2.2x packet", packet
[0]);
3112 gdb_put_packet(connection
, NULL
, 0);
3116 /* if a packet handler returned an error, exit input loop */
3117 if (retval
!= ERROR_OK
)
3121 if (gdb_con
->ctrl_c
) {
3122 if (target
->state
== TARGET_RUNNING
) {
3123 struct target
*t
= target
;
3125 target
->rtos
->gdb_target_for_threadid(connection
, target
->rtos
->current_threadid
, &t
);
3126 retval
= target_halt(t
);
3127 if (retval
!= ERROR_OK
)
3128 target_call_event_callbacks(target
, TARGET_EVENT_GDB_HALT
);
3129 gdb_con
->ctrl_c
= 0;
3131 LOG_INFO("The target is not running when halt was requested, stopping GDB.");
3132 target_call_event_callbacks(target
, TARGET_EVENT_GDB_HALT
);
3136 } while (gdb_con
->buf_cnt
> 0);
3141 static int gdb_input(struct connection
*connection
)
3143 int retval
= gdb_input_inner(connection
);
3144 struct gdb_connection
*gdb_con
= connection
->priv
;
3145 if (retval
== ERROR_SERVER_REMOTE_CLOSED
)
3148 /* logging does not propagate the error, yet can set the gdb_con->closed flag */
3149 if (gdb_con
->closed
)
3150 return ERROR_SERVER_REMOTE_CLOSED
;
3152 /* we'll recover from any other errors(e.g. temporary timeouts, etc.) */
3156 static int gdb_target_start(struct target
*target
, const char *port
)
3158 struct gdb_service
*gdb_service
;
3160 gdb_service
= malloc(sizeof(struct gdb_service
));
3162 if (NULL
== gdb_service
)
3165 gdb_service
->target
= target
;
3166 gdb_service
->core
[0] = -1;
3167 gdb_service
->core
[1] = -1;
3168 target
->gdb_service
= gdb_service
;
3170 ret
= add_service("gdb",
3171 port
, 1, &gdb_new_connection
, &gdb_input
,
3172 &gdb_connection_closed
, gdb_service
);
3173 /* initialialize all targets gdb service with the same pointer */
3175 struct target_list
*head
;
3176 struct target
*curr
;
3177 head
= target
->head
;
3178 while (head
!= (struct target_list
*)NULL
) {
3179 curr
= head
->target
;
3181 curr
->gdb_service
= gdb_service
;
3188 static int gdb_target_add_one(struct target
*target
)
3190 if (strcmp(gdb_port
, "disabled") == 0) {
3191 LOG_INFO("gdb port disabled");
3195 /* one gdb instance per smp list */
3196 if ((target
->smp
) && (target
->gdb_service
))
3198 int retval
= gdb_target_start(target
, gdb_port_next
);
3199 if (retval
== ERROR_OK
) {
3201 /* If we can parse the port number
3202 * then we increment the port number for the next target.
3205 portnumber
= strtol(gdb_port_next
, &end
, 0);
3207 if (parse_long(gdb_port_next
, &portnumber
) == ERROR_OK
) {
3208 free(gdb_port_next
);
3210 gdb_port_next
= alloc_printf("%d", portnumber
+1);
3212 /* Don't increment if gdb_port is 0, since we're just
3213 * trying to allocate an unused port. */
3214 gdb_port_next
= strdup("0");
3222 int gdb_target_add_all(struct target
*target
)
3224 if (strcmp(gdb_port
, "disabled") == 0) {
3225 LOG_INFO("gdb server disabled");
3229 if (NULL
== target
) {
3230 LOG_WARNING("gdb services need one or more targets defined");
3234 while (NULL
!= target
) {
3235 int retval
= gdb_target_add_one(target
);
3236 if (ERROR_OK
!= retval
)
3239 target
= target
->next
;
3245 COMMAND_HANDLER(handle_gdb_sync_command
)
3248 return ERROR_COMMAND_SYNTAX_ERROR
;
3250 if (current_gdb_connection
== NULL
) {
3251 command_print(CMD_CTX
,
3252 "gdb_sync command can only be run from within gdb using \"monitor gdb_sync\"");
3256 current_gdb_connection
->sync
= true;
3261 /* daemon configuration command gdb_port */
3262 COMMAND_HANDLER(handle_gdb_port_command
)
3264 int retval
= CALL_COMMAND_HANDLER(server_pipe_command
, &gdb_port
);
3265 if (ERROR_OK
== retval
) {
3266 free(gdb_port_next
);
3267 gdb_port_next
= strdup(gdb_port
);
3272 COMMAND_HANDLER(handle_gdb_memory_map_command
)
3275 return ERROR_COMMAND_SYNTAX_ERROR
;
3277 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], gdb_use_memory_map
);
3281 COMMAND_HANDLER(handle_gdb_flash_program_command
)
3284 return ERROR_COMMAND_SYNTAX_ERROR
;
3286 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], gdb_flash_program
);
3290 COMMAND_HANDLER(handle_gdb_report_data_abort_command
)
3293 return ERROR_COMMAND_SYNTAX_ERROR
;
3295 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], gdb_report_data_abort
);
3299 /* gdb_breakpoint_override */
3300 COMMAND_HANDLER(handle_gdb_breakpoint_override_command
)
3302 if (CMD_ARGC
== 0) {
3304 } else if (CMD_ARGC
== 1) {
3305 gdb_breakpoint_override
= 1;
3306 if (strcmp(CMD_ARGV
[0], "hard") == 0)
3307 gdb_breakpoint_override_type
= BKPT_HARD
;
3308 else if (strcmp(CMD_ARGV
[0], "soft") == 0)
3309 gdb_breakpoint_override_type
= BKPT_SOFT
;
3310 else if (strcmp(CMD_ARGV
[0], "disable") == 0)
3311 gdb_breakpoint_override
= 0;
3313 return ERROR_COMMAND_SYNTAX_ERROR
;
3314 if (gdb_breakpoint_override
)
3315 LOG_USER("force %s breakpoints",
3316 (gdb_breakpoint_override_type
== BKPT_HARD
) ? "hard" : "soft");
3318 LOG_USER("breakpoint type is not overridden");
3323 COMMAND_HANDLER(handle_gdb_target_description_command
)
3326 return ERROR_COMMAND_SYNTAX_ERROR
;
3328 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], gdb_use_target_description
);
3332 COMMAND_HANDLER(handle_gdb_save_tdesc_command
)
3335 uint32_t tdesc_length
;
3336 struct target
*target
= get_current_target(CMD_CTX
);
3338 int retval
= gdb_generate_target_description(target
, &tdesc
);
3339 if (retval
!= ERROR_OK
) {
3340 LOG_ERROR("Unable to Generate Target Description");
3344 tdesc_length
= strlen(tdesc
);
3346 struct fileio
*fileio
;
3347 size_t size_written
;
3349 char *tdesc_filename
= alloc_printf("%s.xml", target_type_name(target
));
3350 if (tdesc_filename
== NULL
) {
3351 retval
= ERROR_FAIL
;
3355 retval
= fileio_open(&fileio
, tdesc_filename
, FILEIO_WRITE
, FILEIO_TEXT
);
3357 if (retval
!= ERROR_OK
) {
3358 LOG_ERROR("Can't open %s for writing", tdesc_filename
);
3362 retval
= fileio_write(fileio
, tdesc_length
, tdesc
, &size_written
);
3364 fileio_close(fileio
);
3366 if (retval
!= ERROR_OK
)
3367 LOG_ERROR("Error while writing the tdesc file");
3370 free(tdesc_filename
);
3376 static const struct command_registration gdb_command_handlers
[] = {
3379 .handler
= handle_gdb_sync_command
,
3380 .mode
= COMMAND_ANY
,
3381 .help
= "next stepi will return immediately allowing "
3382 "GDB to fetch register state without affecting "
3388 .handler
= handle_gdb_port_command
,
3389 .mode
= COMMAND_ANY
,
3390 .help
= "Normally gdb listens to a TCP/IP port. Each subsequent GDB "
3391 "server listens for the next port number after the "
3392 "base port number specified. "
3393 "No arguments reports GDB port. \"pipe\" means listen to stdin "
3394 "output to stdout, an integer is base port number, \"disabled\" disables "
3395 "port. Any other string is are interpreted as named pipe to listen to. "
3396 "Output pipe is the same name as input pipe, but with 'o' appended.",
3397 .usage
= "[port_num]",
3400 .name
= "gdb_memory_map",
3401 .handler
= handle_gdb_memory_map_command
,
3402 .mode
= COMMAND_CONFIG
,
3403 .help
= "enable or disable memory map",
3404 .usage
= "('enable'|'disable')"
3407 .name
= "gdb_flash_program",
3408 .handler
= handle_gdb_flash_program_command
,
3409 .mode
= COMMAND_CONFIG
,
3410 .help
= "enable or disable flash program",
3411 .usage
= "('enable'|'disable')"
3414 .name
= "gdb_report_data_abort",
3415 .handler
= handle_gdb_report_data_abort_command
,
3416 .mode
= COMMAND_CONFIG
,
3417 .help
= "enable or disable reporting data aborts",
3418 .usage
= "('enable'|'disable')"
3421 .name
= "gdb_breakpoint_override",
3422 .handler
= handle_gdb_breakpoint_override_command
,
3423 .mode
= COMMAND_ANY
,
3424 .help
= "Display or specify type of breakpoint "
3425 "to be used by gdb 'break' commands.",
3426 .usage
= "('hard'|'soft'|'disable')"
3429 .name
= "gdb_target_description",
3430 .handler
= handle_gdb_target_description_command
,
3431 .mode
= COMMAND_CONFIG
,
3432 .help
= "enable or disable target description",
3433 .usage
= "('enable'|'disable')"
3436 .name
= "gdb_save_tdesc",
3437 .handler
= handle_gdb_save_tdesc_command
,
3438 .mode
= COMMAND_EXEC
,
3439 .help
= "Save the target description file",
3441 COMMAND_REGISTRATION_DONE
3444 int gdb_register_commands(struct command_context
*cmd_ctx
)
3446 gdb_port
= strdup("3333");
3447 gdb_port_next
= strdup("3333");
3448 return register_commands(cmd_ctx
, NULL
, gdb_command_handlers
);