1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2007-2010 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * Copyright (C) 2011 by Broadcom Corporation *
12 * Evan Hunter - ehunter@broadcom.com *
14 * Copyright (C) ST-Ericsson SA 2011 *
15 * michel.jaouen@stericsson.com : smp minimum support *
17 * Copyright (C) 2013 Andes Technology *
18 * Hsiangkai Wang <hkwang@andestech.com> *
20 * Copyright (C) 2013 Franck Jullien *
21 * elec4fun@gmail.com *
23 * This program is free software; you can redistribute it and/or modify *
24 * it under the terms of the GNU General Public License as published by *
25 * the Free Software Foundation; either version 2 of the License, or *
26 * (at your option) any later version. *
28 * This program is distributed in the hope that it will be useful, *
29 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
31 * GNU General Public License for more details. *
33 * You should have received a copy of the GNU General Public License *
34 * along with this program; if not, write to the *
35 * Free Software Foundation, Inc., *
36 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
37 ***************************************************************************/
43 #include <target/breakpoints.h>
44 #include <target/target_request.h>
45 #include <target/register.h>
47 #include <flash/nor/core.h>
48 #include "gdb_server.h"
49 #include <target/image.h>
50 #include <jtag/jtag.h>
51 #include "rtos/rtos.h"
52 #include "target/smp.h"
56 * GDB server implementation.
58 * This implements the GDB Remote Serial Protocol, over TCP connections,
59 * giving GDB access to the JTAG or other hardware debugging facilities
60 * found in most modern embedded processors.
63 struct target_desc_format
{
65 uint32_t tdesc_length
;
68 /* private connection data for GDB */
69 struct gdb_connection
{
70 char buffer
[GDB_BUFFER_SIZE
];
74 enum target_state frontend_state
;
75 struct image
*vflash_image
;
79 /* set flag to true if you want the next stepi to return immediately.
80 * allowing GDB to pick up a fresh set of register values from the target
81 * without modifying the target state. */
83 /* We delay reporting memory write errors until next step/continue or memory
84 * write. This improves performance of gdb load significantly as the GDB packet
85 * can be replied immediately and a new GDB packet will be ready without delay
86 * (ca. 10% or so...). */
88 /* with extended-remote it seems we need to better emulate attach/detach.
89 * what this means is we reply with a W stop reply after a kill packet,
90 * normally we reply with a S reply via gdb_last_signal_packet.
91 * as a side note this behaviour only effects gdb > 6.8 */
93 /* temporarily used for target description support */
94 struct target_desc_format target_desc
;
98 #define _DEBUG_GDB_IO_
101 static struct gdb_connection
*current_gdb_connection
;
103 static int gdb_breakpoint_override
;
104 static enum breakpoint_type gdb_breakpoint_override_type
;
106 static int gdb_error(struct connection
*connection
, int retval
);
107 static char *gdb_port
;
108 static char *gdb_port_next
;
110 static void gdb_log_callback(void *priv
, const char *file
, unsigned line
,
111 const char *function
, const char *string
);
113 /* number of gdb connections, mainly to suppress gdb related debugging spam
114 * in helper/log.c when no gdb connections are actually active */
115 int gdb_actual_connections
;
117 /* set if we are sending a memory map to gdb
118 * via qXfer:memory-map:read packet */
119 /* enabled by default*/
120 static int gdb_use_memory_map
= 1;
121 /* enabled by default*/
122 static int gdb_flash_program
= 1;
124 /* if set, data aborts cause an error to be reported in memory read packets
125 * see the code in gdb_read_memory_packet() for further explanations.
126 * Disabled by default.
128 static int gdb_report_data_abort
;
130 /* set if we are sending target descriptions to gdb
131 * via qXfer:features:read packet */
132 /* enabled by default */
133 static int gdb_use_target_description
= 1;
135 /* current processing free-run type, used by file-I/O */
136 static char gdb_running_type
;
138 static int gdb_last_signal(struct target
*target
)
140 switch (target
->debug_reason
) {
141 case DBG_REASON_DBGRQ
:
142 return 0x2; /* SIGINT */
143 case DBG_REASON_BREAKPOINT
:
144 case DBG_REASON_WATCHPOINT
:
145 case DBG_REASON_WPTANDBKPT
:
146 return 0x05; /* SIGTRAP */
147 case DBG_REASON_SINGLESTEP
:
148 return 0x05; /* SIGTRAP */
149 case DBG_REASON_NOTHALTED
:
150 return 0x0; /* no signal... shouldn't happen */
152 LOG_USER("undefined debug reason %d - target needs reset",
153 target
->debug_reason
);
158 static int check_pending(struct connection
*connection
,
159 int timeout_s
, int *got_data
)
161 /* a non-blocking socket will block if there is 0 bytes available on the socket,
162 * but return with as many bytes as are available immediately
166 struct gdb_connection
*gdb_con
= connection
->priv
;
168 if (got_data
== NULL
)
172 if (gdb_con
->buf_cnt
> 0) {
178 FD_SET(connection
->fd
, &read_fds
);
180 tv
.tv_sec
= timeout_s
;
182 if (socket_select(connection
->fd
+ 1, &read_fds
, NULL
, NULL
, &tv
) == 0) {
183 /* This can typically be because a "monitor" command took too long
184 * before printing any progress messages
187 return ERROR_GDB_TIMEOUT
;
191 *got_data
= FD_ISSET(connection
->fd
, &read_fds
) != 0;
195 static int gdb_get_char_inner(struct connection
*connection
, int *next_char
)
197 struct gdb_connection
*gdb_con
= connection
->priv
;
198 int retval
= ERROR_OK
;
200 #ifdef _DEBUG_GDB_IO_
204 if (connection
->service
->type
!= CONNECTION_TCP
)
205 gdb_con
->buf_cnt
= read(connection
->fd
, gdb_con
->buffer
, GDB_BUFFER_SIZE
);
207 retval
= check_pending(connection
, 1, NULL
);
208 if (retval
!= ERROR_OK
)
210 gdb_con
->buf_cnt
= read_socket(connection
->fd
,
215 if (gdb_con
->buf_cnt
> 0)
217 if (gdb_con
->buf_cnt
== 0) {
219 return ERROR_SERVER_REMOTE_CLOSED
;
223 errno
= WSAGetLastError();
229 case WSAECONNABORTED
:
231 return ERROR_SERVER_REMOTE_CLOSED
;
234 return ERROR_SERVER_REMOTE_CLOSED
;
236 LOG_ERROR("read: %d", errno
);
246 return ERROR_SERVER_REMOTE_CLOSED
;
249 return ERROR_SERVER_REMOTE_CLOSED
;
251 LOG_ERROR("read: %s", strerror(errno
));
253 return ERROR_SERVER_REMOTE_CLOSED
;
258 #ifdef _DEBUG_GDB_IO_
259 debug_buffer
= strndup(gdb_con
->buffer
, gdb_con
->buf_cnt
);
260 LOG_DEBUG("received '%s'", debug_buffer
);
264 gdb_con
->buf_p
= gdb_con
->buffer
;
266 *next_char
= *(gdb_con
->buf_p
++);
267 if (gdb_con
->buf_cnt
> 0)
268 connection
->input_pending
= 1;
270 connection
->input_pending
= 0;
271 #ifdef _DEBUG_GDB_IO_
272 LOG_DEBUG("returned char '%c' (0x%2.2x)", *next_char
, *next_char
);
279 * The cool thing about this fn is that it allows buf_p and buf_cnt to be
280 * held in registers in the inner loop.
282 * For small caches and embedded systems this is important!
284 static inline int gdb_get_char_fast(struct connection
*connection
,
285 int *next_char
, char **buf_p
, int *buf_cnt
)
287 int retval
= ERROR_OK
;
289 if ((*buf_cnt
)-- > 0) {
290 *next_char
= **buf_p
;
293 connection
->input_pending
= 1;
295 connection
->input_pending
= 0;
297 #ifdef _DEBUG_GDB_IO_
298 LOG_DEBUG("returned char '%c' (0x%2.2x)", *next_char
, *next_char
);
304 struct gdb_connection
*gdb_con
= connection
->priv
;
305 gdb_con
->buf_p
= *buf_p
;
306 gdb_con
->buf_cnt
= *buf_cnt
;
307 retval
= gdb_get_char_inner(connection
, next_char
);
308 *buf_p
= gdb_con
->buf_p
;
309 *buf_cnt
= gdb_con
->buf_cnt
;
314 static int gdb_get_char(struct connection
*connection
, int *next_char
)
316 struct gdb_connection
*gdb_con
= connection
->priv
;
317 return gdb_get_char_fast(connection
, next_char
, &gdb_con
->buf_p
, &gdb_con
->buf_cnt
);
320 static int gdb_putback_char(struct connection
*connection
, int last_char
)
322 struct gdb_connection
*gdb_con
= connection
->priv
;
324 if (gdb_con
->buf_p
> gdb_con
->buffer
) {
325 *(--gdb_con
->buf_p
) = last_char
;
328 LOG_ERROR("BUG: couldn't put character back");
333 /* The only way we can detect that the socket is closed is the first time
334 * we write to it, we will fail. Subsequent write operations will
335 * succeed. Shudder! */
336 static int gdb_write(struct connection
*connection
, void *data
, int len
)
338 struct gdb_connection
*gdb_con
= connection
->priv
;
340 return ERROR_SERVER_REMOTE_CLOSED
;
342 if (connection_write(connection
, data
, len
) == len
)
345 return ERROR_SERVER_REMOTE_CLOSED
;
348 static int gdb_put_packet_inner(struct connection
*connection
,
349 char *buffer
, int len
)
352 unsigned char my_checksum
= 0;
353 #ifdef _DEBUG_GDB_IO_
358 struct gdb_connection
*gdb_con
= connection
->priv
;
360 for (i
= 0; i
< len
; i
++)
361 my_checksum
+= buffer
[i
];
363 #ifdef _DEBUG_GDB_IO_
365 * At this point we should have nothing in the input queue from GDB,
366 * however sometimes '-' is sent even though we've already received
367 * an ACK (+) for everything we've sent off.
371 retval
= check_pending(connection
, 0, &gotdata
);
372 if (retval
!= ERROR_OK
)
376 retval
= gdb_get_char(connection
, &reply
);
377 if (retval
!= ERROR_OK
)
380 /* fix a problem with some IAR tools */
381 gdb_putback_char(connection
, reply
);
382 LOG_DEBUG("Unexpected start of new packet");
386 LOG_WARNING("Discard unexpected char %c", reply
);
391 #ifdef _DEBUG_GDB_IO_
392 debug_buffer
= strndup(buffer
, len
);
393 LOG_DEBUG("sending packet '$%s#%2.2x'", debug_buffer
, my_checksum
);
397 char local_buffer
[1024];
398 local_buffer
[0] = '$';
399 if ((size_t)len
+ 4 <= sizeof(local_buffer
)) {
400 /* performance gain on smaller packets by only a single call to gdb_write() */
401 memcpy(local_buffer
+ 1, buffer
, len
++);
402 len
+= snprintf(local_buffer
+ len
, sizeof(local_buffer
) - len
, "#%02x", my_checksum
);
403 retval
= gdb_write(connection
, local_buffer
, len
);
404 if (retval
!= ERROR_OK
)
407 /* larger packets are transmitted directly from caller supplied buffer
408 * by several calls to gdb_write() to avoid dynamic allocation */
409 snprintf(local_buffer
+ 1, sizeof(local_buffer
) - 1, "#%02x", my_checksum
);
410 retval
= gdb_write(connection
, local_buffer
, 1);
411 if (retval
!= ERROR_OK
)
413 retval
= gdb_write(connection
, buffer
, len
);
414 if (retval
!= ERROR_OK
)
416 retval
= gdb_write(connection
, local_buffer
+ 1, 3);
417 if (retval
!= ERROR_OK
)
421 if (gdb_con
->noack_mode
)
424 retval
= gdb_get_char(connection
, &reply
);
425 if (retval
!= ERROR_OK
)
430 else if (reply
== '-') {
431 /* Stop sending output packets for now */
432 log_remove_callback(gdb_log_callback
, connection
);
433 LOG_WARNING("negative reply, retrying");
434 } else if (reply
== 0x3) {
436 retval
= gdb_get_char(connection
, &reply
);
437 if (retval
!= ERROR_OK
)
441 else if (reply
== '-') {
442 /* Stop sending output packets for now */
443 log_remove_callback(gdb_log_callback
, connection
);
444 LOG_WARNING("negative reply, retrying");
445 } else if (reply
== '$') {
446 LOG_ERROR("GDB missing ack(1) - assumed good");
447 gdb_putback_char(connection
, reply
);
450 LOG_ERROR("unknown character(1) 0x%2.2x in reply, dropping connection", reply
);
452 return ERROR_SERVER_REMOTE_CLOSED
;
454 } else if (reply
== '$') {
455 LOG_ERROR("GDB missing ack(2) - assumed good");
456 gdb_putback_char(connection
, reply
);
459 LOG_ERROR("unknown character(2) 0x%2.2x in reply, dropping connection",
462 return ERROR_SERVER_REMOTE_CLOSED
;
466 return ERROR_SERVER_REMOTE_CLOSED
;
471 int gdb_put_packet(struct connection
*connection
, char *buffer
, int len
)
473 struct gdb_connection
*gdb_con
= connection
->priv
;
475 int retval
= gdb_put_packet_inner(connection
, buffer
, len
);
478 /* we sent some data, reset timer for keep alive messages */
484 static inline int fetch_packet(struct connection
*connection
,
485 int *checksum_ok
, int noack
, int *len
, char *buffer
)
487 unsigned char my_checksum
= 0;
490 int retval
= ERROR_OK
;
492 struct gdb_connection
*gdb_con
= connection
->priv
;
497 /* move this over into local variables to use registers and give the
498 * more freedom to optimize */
499 char *buf_p
= gdb_con
->buf_p
;
500 int buf_cnt
= gdb_con
->buf_cnt
;
503 /* The common case is that we have an entire packet with no escape chars.
504 * We need to leave at least 2 bytes in the buffer to have
505 * gdb_get_char() update various bits and bobs correctly.
507 if ((buf_cnt
> 2) && ((buf_cnt
+ count
) < *len
)) {
508 /* The compiler will struggle a bit with constant propagation and
509 * aliasing, so we help it by showing that these values do not
510 * change inside the loop
514 int run
= buf_cnt
- 2;
520 if (character
== '#') {
521 /* Danger! character can be '#' when esc is
522 * used so we need an explicit boolean for done here. */
527 if (character
== '}') {
528 /* data transmitted in binary mode (X packet)
529 * uses 0x7d as escape character */
530 my_checksum
+= character
& 0xff;
533 my_checksum
+= character
& 0xff;
534 buffer
[count
++] = (character
^ 0x20) & 0xff;
536 my_checksum
+= character
& 0xff;
537 buffer
[count
++] = character
& 0xff;
546 LOG_ERROR("packet buffer too small");
547 retval
= ERROR_GDB_BUFFER_TOO_SMALL
;
551 retval
= gdb_get_char_fast(connection
, &character
, &buf_p
, &buf_cnt
);
552 if (retval
!= ERROR_OK
)
555 if (character
== '#')
558 if (character
== '}') {
559 /* data transmitted in binary mode (X packet)
560 * uses 0x7d as escape character */
561 my_checksum
+= character
& 0xff;
563 retval
= gdb_get_char_fast(connection
, &character
, &buf_p
, &buf_cnt
);
564 if (retval
!= ERROR_OK
)
567 my_checksum
+= character
& 0xff;
568 buffer
[count
++] = (character
^ 0x20) & 0xff;
570 my_checksum
+= character
& 0xff;
571 buffer
[count
++] = character
& 0xff;
575 gdb_con
->buf_p
= buf_p
;
576 gdb_con
->buf_cnt
= buf_cnt
;
578 if (retval
!= ERROR_OK
)
583 retval
= gdb_get_char(connection
, &character
);
584 if (retval
!= ERROR_OK
)
586 checksum
[0] = character
;
587 retval
= gdb_get_char(connection
, &character
);
588 if (retval
!= ERROR_OK
)
590 checksum
[1] = character
;
594 *checksum_ok
= (my_checksum
== strtoul(checksum
, NULL
, 16));
599 static int gdb_get_packet_inner(struct connection
*connection
,
600 char *buffer
, int *len
)
604 struct gdb_connection
*gdb_con
= connection
->priv
;
608 retval
= gdb_get_char(connection
, &character
);
609 if (retval
!= ERROR_OK
)
612 #ifdef _DEBUG_GDB_IO_
613 LOG_DEBUG("character: '%c'", character
);
620 /* gdb sends a dummy ack '+' at every remote connect - see
621 * remote_start_remote (remote.c)
622 * in case anyone tries to debug why they receive this
623 * warning every time */
624 LOG_WARNING("acknowledgment received, but no packet pending");
627 LOG_WARNING("negative acknowledgment, but no packet pending");
634 LOG_WARNING("ignoring character 0x%x", character
);
637 } while (character
!= '$');
640 /* explicit code expansion here to get faster inlined code in -O3 by not
641 * calculating checksum */
642 if (gdb_con
->noack_mode
) {
643 retval
= fetch_packet(connection
, &checksum_ok
, 1, len
, buffer
);
644 if (retval
!= ERROR_OK
)
647 retval
= fetch_packet(connection
, &checksum_ok
, 0, len
, buffer
);
648 if (retval
!= ERROR_OK
)
652 if (gdb_con
->noack_mode
) {
653 /* checksum is not checked in noack mode */
657 retval
= gdb_write(connection
, "+", 1);
658 if (retval
!= ERROR_OK
)
664 return ERROR_SERVER_REMOTE_CLOSED
;
669 static int gdb_get_packet(struct connection
*connection
, char *buffer
, int *len
)
671 struct gdb_connection
*gdb_con
= connection
->priv
;
673 int retval
= gdb_get_packet_inner(connection
, buffer
, len
);
678 static int gdb_output_con(struct connection
*connection
, const char *line
)
683 bin_size
= strlen(line
);
685 hex_buffer
= malloc(bin_size
* 2 + 2);
686 if (hex_buffer
== NULL
)
687 return ERROR_GDB_BUFFER_TOO_SMALL
;
690 int pkt_len
= hexify(hex_buffer
+ 1, line
, bin_size
, bin_size
* 2 + 1);
691 int retval
= gdb_put_packet(connection
, hex_buffer
, pkt_len
+ 1);
697 static int gdb_output(struct command_context
*context
, const char *line
)
699 /* this will be dumped to the log and also sent as an O packet if possible */
700 LOG_USER_N("%s", line
);
704 static void gdb_signal_reply(struct target
*target
, struct connection
*connection
)
706 struct gdb_connection
*gdb_connection
= connection
->priv
;
708 char stop_reason
[20];
712 if (target
->debug_reason
== DBG_REASON_EXIT
) {
713 sig_reply_len
= snprintf(sig_reply
, sizeof(sig_reply
), "W00");
715 if (gdb_connection
->ctrl_c
) {
717 gdb_connection
->ctrl_c
= 0;
719 signal_var
= gdb_last_signal(target
);
721 stop_reason
[0] = '\0';
722 if (target
->debug_reason
== DBG_REASON_WATCHPOINT
) {
723 enum watchpoint_rw hit_wp_type
;
724 uint32_t hit_wp_address
;
726 if (watchpoint_hit(target
, &hit_wp_type
, &hit_wp_address
) == ERROR_OK
) {
728 switch (hit_wp_type
) {
730 snprintf(stop_reason
, sizeof(stop_reason
),
731 "watch:%08" PRIx32
";", hit_wp_address
);
734 snprintf(stop_reason
, sizeof(stop_reason
),
735 "rwatch:%08" PRIx32
";", hit_wp_address
);
738 snprintf(stop_reason
, sizeof(stop_reason
),
739 "awatch:%08" PRIx32
";", hit_wp_address
);
747 sig_reply_len
= snprintf(sig_reply
, sizeof(sig_reply
), "T%2.2x%s",
748 signal_var
, stop_reason
);
751 gdb_put_packet(connection
, sig_reply
, sig_reply_len
);
752 gdb_connection
->frontend_state
= TARGET_HALTED
;
753 rtos_update_threads(target
);
756 static void gdb_fileio_reply(struct target
*target
, struct connection
*connection
)
758 struct gdb_connection
*gdb_connection
= connection
->priv
;
759 char fileio_command
[256];
761 bool program_exited
= false;
763 if (strcmp(target
->fileio_info
->identifier
, "open") == 0)
764 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
",%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
765 target
->fileio_info
->param_1
,
766 target
->fileio_info
->param_2
,
767 target
->fileio_info
->param_3
,
768 target
->fileio_info
->param_4
);
769 else if (strcmp(target
->fileio_info
->identifier
, "close") == 0)
770 sprintf(fileio_command
, "F%s,%" PRIx32
, target
->fileio_info
->identifier
,
771 target
->fileio_info
->param_1
);
772 else if (strcmp(target
->fileio_info
->identifier
, "read") == 0)
773 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
774 target
->fileio_info
->param_1
,
775 target
->fileio_info
->param_2
,
776 target
->fileio_info
->param_3
);
777 else if (strcmp(target
->fileio_info
->identifier
, "write") == 0)
778 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
779 target
->fileio_info
->param_1
,
780 target
->fileio_info
->param_2
,
781 target
->fileio_info
->param_3
);
782 else if (strcmp(target
->fileio_info
->identifier
, "lseek") == 0)
783 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
784 target
->fileio_info
->param_1
,
785 target
->fileio_info
->param_2
,
786 target
->fileio_info
->param_3
);
787 else if (strcmp(target
->fileio_info
->identifier
, "rename") == 0)
788 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
",%" PRIx32
"/%" PRIx32
, target
->fileio_info
->identifier
,
789 target
->fileio_info
->param_1
,
790 target
->fileio_info
->param_2
,
791 target
->fileio_info
->param_3
,
792 target
->fileio_info
->param_4
);
793 else if (strcmp(target
->fileio_info
->identifier
, "unlink") == 0)
794 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
, target
->fileio_info
->identifier
,
795 target
->fileio_info
->param_1
,
796 target
->fileio_info
->param_2
);
797 else if (strcmp(target
->fileio_info
->identifier
, "stat") == 0)
798 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
799 target
->fileio_info
->param_1
,
800 target
->fileio_info
->param_2
,
801 target
->fileio_info
->param_3
);
802 else if (strcmp(target
->fileio_info
->identifier
, "fstat") == 0)
803 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
804 target
->fileio_info
->param_1
,
805 target
->fileio_info
->param_2
);
806 else if (strcmp(target
->fileio_info
->identifier
, "gettimeofday") == 0)
807 sprintf(fileio_command
, "F%s,%" PRIx32
",%" PRIx32
, target
->fileio_info
->identifier
,
808 target
->fileio_info
->param_1
,
809 target
->fileio_info
->param_2
);
810 else if (strcmp(target
->fileio_info
->identifier
, "isatty") == 0)
811 sprintf(fileio_command
, "F%s,%" PRIx32
, target
->fileio_info
->identifier
,
812 target
->fileio_info
->param_1
);
813 else if (strcmp(target
->fileio_info
->identifier
, "system") == 0)
814 sprintf(fileio_command
, "F%s,%" PRIx32
"/%" PRIx32
, target
->fileio_info
->identifier
,
815 target
->fileio_info
->param_1
,
816 target
->fileio_info
->param_2
);
817 else if (strcmp(target
->fileio_info
->identifier
, "exit") == 0) {
818 /* If target hits exit syscall, report to GDB the program is terminated.
819 * In addition, let target run its own exit syscall handler. */
820 program_exited
= true;
821 sprintf(fileio_command
, "W%02" PRIx32
, target
->fileio_info
->param_1
);
823 LOG_DEBUG("Unknown syscall: %s", target
->fileio_info
->identifier
);
825 /* encounter unknown syscall, continue */
826 gdb_connection
->frontend_state
= TARGET_RUNNING
;
827 target_resume(target
, 1, 0x0, 0, 0);
831 command_len
= strlen(fileio_command
);
832 gdb_put_packet(connection
, fileio_command
, command_len
);
834 if (program_exited
) {
835 /* Use target_resume() to let target run its own exit syscall handler. */
836 gdb_connection
->frontend_state
= TARGET_RUNNING
;
837 target_resume(target
, 1, 0x0, 0, 0);
839 gdb_connection
->frontend_state
= TARGET_HALTED
;
840 rtos_update_threads(target
);
844 static void gdb_frontend_halted(struct target
*target
, struct connection
*connection
)
846 struct gdb_connection
*gdb_connection
= connection
->priv
;
848 /* In the GDB protocol when we are stepping or continuing execution,
849 * we have a lingering reply. Upon receiving a halted event
850 * when we have that lingering packet, we reply to the original
851 * step or continue packet.
853 * Executing monitor commands can bring the target in and
854 * out of the running state so we'll see lots of TARGET_EVENT_XXX
855 * that are to be ignored.
857 if (gdb_connection
->frontend_state
== TARGET_RUNNING
) {
858 /* stop forwarding log packets! */
859 log_remove_callback(gdb_log_callback
, connection
);
861 /* check fileio first */
862 if (target_get_gdb_fileio_info(target
, target
->fileio_info
) == ERROR_OK
)
863 gdb_fileio_reply(target
, connection
);
865 gdb_signal_reply(target
, connection
);
869 static int gdb_target_callback_event_handler(struct target
*target
,
870 enum target_event event
, void *priv
)
873 struct connection
*connection
= priv
;
874 struct gdb_service
*gdb_service
= connection
->service
->priv
;
876 if (gdb_service
->target
!= target
)
880 case TARGET_EVENT_GDB_HALT
:
881 gdb_frontend_halted(target
, connection
);
883 case TARGET_EVENT_HALTED
:
884 target_call_event_callbacks(target
, TARGET_EVENT_GDB_END
);
886 case TARGET_EVENT_GDB_FLASH_ERASE_START
:
887 retval
= jtag_execute_queue();
888 if (retval
!= ERROR_OK
)
898 static int gdb_new_connection(struct connection
*connection
)
900 struct gdb_connection
*gdb_connection
= malloc(sizeof(struct gdb_connection
));
901 struct gdb_service
*gdb_service
= connection
->service
->priv
;
905 connection
->priv
= gdb_connection
;
907 /* initialize gdb connection information */
908 gdb_connection
->buf_p
= gdb_connection
->buffer
;
909 gdb_connection
->buf_cnt
= 0;
910 gdb_connection
->ctrl_c
= 0;
911 gdb_connection
->frontend_state
= TARGET_HALTED
;
912 gdb_connection
->vflash_image
= NULL
;
913 gdb_connection
->closed
= 0;
914 gdb_connection
->busy
= 0;
915 gdb_connection
->noack_mode
= 0;
916 gdb_connection
->sync
= false;
917 gdb_connection
->mem_write_error
= false;
918 gdb_connection
->attached
= true;
919 gdb_connection
->target_desc
.tdesc
= NULL
;
920 gdb_connection
->target_desc
.tdesc_length
= 0;
922 /* send ACK to GDB for debug request */
923 gdb_write(connection
, "+", 1);
925 /* output goes through gdb connection */
926 command_set_output_handler(connection
->cmd_ctx
, gdb_output
, connection
);
928 /* we must remove all breakpoints registered to the target as a previous
929 * GDB session could leave dangling breakpoints if e.g. communication
932 breakpoint_clear_target(gdb_service
->target
);
933 watchpoint_clear_target(gdb_service
->target
);
935 /* clean previous rtos session if supported*/
936 if ((gdb_service
->target
->rtos
) && (gdb_service
->target
->rtos
->type
->clean
))
937 gdb_service
->target
->rtos
->type
->clean(gdb_service
->target
);
939 /* remove the initial ACK from the incoming buffer */
940 retval
= gdb_get_char(connection
, &initial_ack
);
941 if (retval
!= ERROR_OK
)
944 /* FIX!!!??? would we actually ever receive a + here???
947 if (initial_ack
!= '+')
948 gdb_putback_char(connection
, initial_ack
);
949 target_call_event_callbacks(gdb_service
->target
, TARGET_EVENT_GDB_ATTACH
);
951 if (gdb_use_memory_map
) {
952 /* Connect must fail if the memory map can't be set up correctly.
954 * This will cause an auto_probe to be invoked, which is either
955 * a no-op or it will fail when the target isn't ready(e.g. not halted).
958 for (i
= 0; i
< flash_get_bank_count(); i
++) {
959 struct flash_bank
*p
;
960 p
= get_flash_bank_by_num_noprobe(i
);
961 if (p
->target
!= gdb_service
->target
)
963 retval
= get_flash_bank_by_num(i
, &p
);
964 if (retval
!= ERROR_OK
) {
965 LOG_ERROR("Connect failed. Consider setting up a gdb-attach event for the target " \
966 "to prepare target for GDB connect, or use 'gdb_memory_map disable'.");
972 gdb_actual_connections
++;
973 LOG_DEBUG("New GDB Connection: %d, Target %s, state: %s",
974 gdb_actual_connections
,
975 target_name(gdb_service
->target
),
976 target_state_name(gdb_service
->target
));
978 /* DANGER! If we fail subsequently, we must remove this handler,
979 * otherwise we occasionally see crashes as the timer can invoke the
982 * register callback to be informed about target events */
983 target_register_event_callback(gdb_target_callback_event_handler
, connection
);
988 static int gdb_connection_closed(struct connection
*connection
)
990 struct gdb_service
*gdb_service
= connection
->service
->priv
;
991 struct gdb_connection
*gdb_connection
= connection
->priv
;
993 /* we're done forwarding messages. Tear down callback before
994 * cleaning up connection.
996 log_remove_callback(gdb_log_callback
, connection
);
998 gdb_actual_connections
--;
999 LOG_DEBUG("GDB Close, Target: %s, state: %s, gdb_actual_connections=%d",
1000 target_name(gdb_service
->target
),
1001 target_state_name(gdb_service
->target
),
1002 gdb_actual_connections
);
1004 /* see if an image built with vFlash commands is left */
1005 if (gdb_connection
->vflash_image
) {
1006 image_close(gdb_connection
->vflash_image
);
1007 free(gdb_connection
->vflash_image
);
1008 gdb_connection
->vflash_image
= NULL
;
1011 /* if this connection registered a debug-message receiver delete it */
1012 delete_debug_msg_receiver(connection
->cmd_ctx
, gdb_service
->target
);
1014 if (connection
->priv
) {
1015 free(connection
->priv
);
1016 connection
->priv
= NULL
;
1018 LOG_ERROR("BUG: connection->priv == NULL");
1020 target_unregister_event_callback(gdb_target_callback_event_handler
, connection
);
1022 target_call_event_callbacks(gdb_service
->target
, TARGET_EVENT_GDB_END
);
1024 target_call_event_callbacks(gdb_service
->target
, TARGET_EVENT_GDB_DETACH
);
1029 static void gdb_send_error(struct connection
*connection
, uint8_t the_error
)
1032 snprintf(err
, 4, "E%2.2X", the_error
);
1033 gdb_put_packet(connection
, err
, 3);
1036 static int gdb_last_signal_packet(struct connection
*connection
,
1037 char *packet
, int packet_size
)
1039 struct target
*target
= get_target_from_connection(connection
);
1040 struct gdb_connection
*gdb_con
= connection
->priv
;
1044 if (!gdb_con
->attached
) {
1045 /* if we are here we have received a kill packet
1046 * reply W stop reply otherwise gdb gets very unhappy */
1047 gdb_put_packet(connection
, "W00", 3);
1051 signal_var
= gdb_last_signal(target
);
1053 snprintf(sig_reply
, 4, "S%2.2x", signal_var
);
1054 gdb_put_packet(connection
, sig_reply
, 3);
1059 static inline int gdb_reg_pos(struct target
*target
, int pos
, int len
)
1061 if (target
->endianness
== TARGET_LITTLE_ENDIAN
)
1064 return len
- 1 - pos
;
1067 /* Convert register to string of bytes. NB! The # of bits in the
1068 * register might be non-divisible by 8(a byte), in which
1069 * case an entire byte is shown.
1071 * NB! the format on the wire is the target endianness
1073 * The format of reg->value is little endian
1076 static void gdb_str_to_target(struct target
*target
,
1077 char *tstr
, struct reg
*reg
)
1084 buf_len
= DIV_ROUND_UP(reg
->size
, 8);
1086 for (i
= 0; i
< buf_len
; i
++) {
1087 int j
= gdb_reg_pos(target
, i
, buf_len
);
1088 tstr
+= sprintf(tstr
, "%02x", buf
[j
]);
1092 /* copy over in register buffer */
1093 static void gdb_target_to_reg(struct target
*target
,
1094 char *tstr
, int str_len
, uint8_t *bin
)
1097 LOG_ERROR("BUG: gdb value with uneven number of characters encountered");
1102 for (i
= 0; i
< str_len
; i
+= 2) {
1104 if (sscanf(tstr
+ i
, "%02x", &t
) != 1) {
1105 LOG_ERROR("BUG: unable to convert register value");
1109 int j
= gdb_reg_pos(target
, i
/2, str_len
/2);
1114 static int gdb_get_registers_packet(struct connection
*connection
,
1115 char *packet
, int packet_size
)
1117 struct target
*target
= get_target_from_connection(connection
);
1118 struct reg
**reg_list
;
1121 int reg_packet_size
= 0;
1126 #ifdef _DEBUG_GDB_IO_
1130 if ((target
->rtos
!= NULL
) && (ERROR_OK
== rtos_get_gdb_reg_list(connection
)))
1133 retval
= target_get_gdb_reg_list(target
, ®_list
, ®_list_size
,
1135 if (retval
!= ERROR_OK
)
1136 return gdb_error(connection
, retval
);
1138 for (i
= 0; i
< reg_list_size
; i
++)
1139 reg_packet_size
+= DIV_ROUND_UP(reg_list
[i
]->size
, 8) * 2;
1141 assert(reg_packet_size
> 0);
1143 reg_packet
= malloc(reg_packet_size
+ 1); /* plus one for string termination null */
1144 reg_packet_p
= reg_packet
;
1146 for (i
= 0; i
< reg_list_size
; i
++) {
1147 if (!reg_list
[i
]->valid
)
1148 reg_list
[i
]->type
->get(reg_list
[i
]);
1149 gdb_str_to_target(target
, reg_packet_p
, reg_list
[i
]);
1150 reg_packet_p
+= DIV_ROUND_UP(reg_list
[i
]->size
, 8) * 2;
1153 #ifdef _DEBUG_GDB_IO_
1155 char *reg_packet_p_debug
;
1156 reg_packet_p_debug
= strndup(reg_packet
, reg_packet_size
);
1157 LOG_DEBUG("reg_packet: %s", reg_packet_p_debug
);
1158 free(reg_packet_p_debug
);
1162 gdb_put_packet(connection
, reg_packet
, reg_packet_size
);
1170 static int gdb_set_registers_packet(struct connection
*connection
,
1171 char *packet
, int packet_size
)
1173 struct target
*target
= get_target_from_connection(connection
);
1175 struct reg
**reg_list
;
1180 #ifdef _DEBUG_GDB_IO_
1184 /* skip command character */
1188 if (packet_size
% 2) {
1189 LOG_WARNING("GDB set_registers packet with uneven characters received, dropping connection");
1190 return ERROR_SERVER_REMOTE_CLOSED
;
1193 retval
= target_get_gdb_reg_list(target
, ®_list
, ®_list_size
,
1195 if (retval
!= ERROR_OK
)
1196 return gdb_error(connection
, retval
);
1199 for (i
= 0; i
< reg_list_size
; i
++) {
1201 int chars
= (DIV_ROUND_UP(reg_list
[i
]->size
, 8) * 2);
1203 if (packet_p
+ chars
> packet
+ packet_size
)
1204 LOG_ERROR("BUG: register packet is too small for registers");
1206 bin_buf
= malloc(DIV_ROUND_UP(reg_list
[i
]->size
, 8));
1207 gdb_target_to_reg(target
, packet_p
, chars
, bin_buf
);
1209 reg_list
[i
]->type
->set(reg_list
[i
], bin_buf
);
1211 /* advance packet pointer */
1217 /* free struct reg *reg_list[] array allocated by get_gdb_reg_list */
1220 gdb_put_packet(connection
, "OK", 2);
1225 static int gdb_get_register_packet(struct connection
*connection
,
1226 char *packet
, int packet_size
)
1228 struct target
*target
= get_target_from_connection(connection
);
1230 int reg_num
= strtoul(packet
+ 1, NULL
, 16);
1231 struct reg
**reg_list
;
1235 #ifdef _DEBUG_GDB_IO_
1239 retval
= target_get_gdb_reg_list(target
, ®_list
, ®_list_size
,
1241 if (retval
!= ERROR_OK
)
1242 return gdb_error(connection
, retval
);
1244 if (reg_list_size
<= reg_num
) {
1245 LOG_ERROR("gdb requested a non-existing register");
1246 return ERROR_SERVER_REMOTE_CLOSED
;
1249 if (!reg_list
[reg_num
]->valid
)
1250 reg_list
[reg_num
]->type
->get(reg_list
[reg_num
]);
1252 reg_packet
= malloc(DIV_ROUND_UP(reg_list
[reg_num
]->size
, 8) * 2 + 1); /* plus one for string termination null */
1254 gdb_str_to_target(target
, reg_packet
, reg_list
[reg_num
]);
1256 gdb_put_packet(connection
, reg_packet
, DIV_ROUND_UP(reg_list
[reg_num
]->size
, 8) * 2);
1264 static int gdb_set_register_packet(struct connection
*connection
,
1265 char *packet
, int packet_size
)
1267 struct target
*target
= get_target_from_connection(connection
);
1270 int reg_num
= strtoul(packet
+ 1, &separator
, 16);
1271 struct reg
**reg_list
;
1277 retval
= target_get_gdb_reg_list(target
, ®_list
, ®_list_size
,
1279 if (retval
!= ERROR_OK
)
1280 return gdb_error(connection
, retval
);
1282 if (reg_list_size
<= reg_num
) {
1283 LOG_ERROR("gdb requested a non-existing register");
1284 return ERROR_SERVER_REMOTE_CLOSED
;
1287 if (*separator
!= '=') {
1288 LOG_ERROR("GDB 'set register packet', but no '=' following the register number");
1289 return ERROR_SERVER_REMOTE_CLOSED
;
1292 /* convert from GDB-string (target-endian) to hex-string (big-endian) */
1293 bin_buf
= malloc(DIV_ROUND_UP(reg_list
[reg_num
]->size
, 8));
1294 int chars
= (DIV_ROUND_UP(reg_list
[reg_num
]->size
, 8) * 2);
1296 if ((unsigned int)chars
!= strlen(separator
+ 1)) {
1297 LOG_ERROR("gdb sent a packet with wrong register size");
1299 return ERROR_SERVER_REMOTE_CLOSED
;
1302 gdb_target_to_reg(target
, separator
+ 1, chars
, bin_buf
);
1304 reg_list
[reg_num
]->type
->set(reg_list
[reg_num
], bin_buf
);
1306 gdb_put_packet(connection
, "OK", 2);
1314 /* No attempt is made to translate the "retval" to
1315 * GDB speak. This has to be done at the calling
1316 * site as no mapping really exists.
1318 static int gdb_error(struct connection
*connection
, int retval
)
1320 LOG_DEBUG("Reporting %i to GDB as generic error", retval
);
1321 gdb_send_error(connection
, EFAULT
);
1325 /* We don't have to worry about the default 2 second timeout for GDB packets,
1326 * because GDB breaks up large memory reads into smaller reads.
1328 * 8191 bytes by the looks of it. Why 8191 bytes instead of 8192?????
1330 static int gdb_read_memory_packet(struct connection
*connection
,
1331 char *packet
, int packet_size
)
1333 struct target
*target
= get_target_from_connection(connection
);
1341 int retval
= ERROR_OK
;
1343 /* skip command character */
1346 addr
= strtoul(packet
, &separator
, 16);
1348 if (*separator
!= ',') {
1349 LOG_ERROR("incomplete read memory packet received, dropping connection");
1350 return ERROR_SERVER_REMOTE_CLOSED
;
1353 len
= strtoul(separator
+ 1, NULL
, 16);
1356 LOG_WARNING("invalid read memory packet received (len == 0)");
1357 gdb_put_packet(connection
, NULL
, 0);
1361 buffer
= malloc(len
);
1363 LOG_DEBUG("addr: 0x%8.8" PRIx32
", len: 0x%8.8" PRIx32
"", addr
, len
);
1365 retval
= target_read_buffer(target
, addr
, len
, buffer
);
1367 if ((retval
!= ERROR_OK
) && !gdb_report_data_abort
) {
1368 /* TODO : Here we have to lie and send back all zero's lest stack traces won't work.
1369 * At some point this might be fixed in GDB, in which case this code can be removed.
1371 * OpenOCD developers are acutely aware of this problem, but there is nothing
1372 * gained by involving the user in this problem that hopefully will get resolved
1375 * http://sourceware.org/cgi-bin/gnatsweb.pl? \
1376 * cmd = view%20audit-trail&database = gdb&pr = 2395
1378 * For now, the default is to fix up things to make current GDB versions work.
1379 * This can be overwritten using the gdb_report_data_abort <'enable'|'disable'> command.
1381 memset(buffer
, 0, len
);
1385 if (retval
== ERROR_OK
) {
1386 hex_buffer
= malloc(len
* 2 + 1);
1388 int pkt_len
= hexify(hex_buffer
, (char *)buffer
, len
, len
* 2 + 1);
1390 gdb_put_packet(connection
, hex_buffer
, pkt_len
);
1394 retval
= gdb_error(connection
, retval
);
1401 static int gdb_write_memory_packet(struct connection
*connection
,
1402 char *packet
, int packet_size
)
1404 struct target
*target
= get_target_from_connection(connection
);
1412 /* skip command character */
1415 addr
= strtoul(packet
, &separator
, 16);
1417 if (*separator
!= ',') {
1418 LOG_ERROR("incomplete write memory packet received, dropping connection");
1419 return ERROR_SERVER_REMOTE_CLOSED
;
1422 len
= strtoul(separator
+ 1, &separator
, 16);
1424 if (*(separator
++) != ':') {
1425 LOG_ERROR("incomplete write memory packet received, dropping connection");
1426 return ERROR_SERVER_REMOTE_CLOSED
;
1429 buffer
= malloc(len
);
1431 LOG_DEBUG("addr: 0x%8.8" PRIx32
", len: 0x%8.8" PRIx32
"", addr
, len
);
1433 if (unhexify((char *)buffer
, separator
, len
) != (int)len
)
1434 LOG_ERROR("unable to decode memory packet");
1436 retval
= target_write_buffer(target
, addr
, len
, buffer
);
1438 if (retval
== ERROR_OK
)
1439 gdb_put_packet(connection
, "OK", 2);
1441 retval
= gdb_error(connection
, retval
);
1448 static int gdb_write_memory_binary_packet(struct connection
*connection
,
1449 char *packet
, int packet_size
)
1451 struct target
*target
= get_target_from_connection(connection
);
1456 int retval
= ERROR_OK
;
1458 /* skip command character */
1461 addr
= strtoul(packet
, &separator
, 16);
1463 if (*separator
!= ',') {
1464 LOG_ERROR("incomplete write memory binary packet received, dropping connection");
1465 return ERROR_SERVER_REMOTE_CLOSED
;
1468 len
= strtoul(separator
+ 1, &separator
, 16);
1470 if (*(separator
++) != ':') {
1471 LOG_ERROR("incomplete write memory binary packet received, dropping connection");
1472 return ERROR_SERVER_REMOTE_CLOSED
;
1475 struct gdb_connection
*gdb_connection
= connection
->priv
;
1477 if (gdb_connection
->mem_write_error
) {
1478 retval
= ERROR_FAIL
;
1479 /* now that we have reported the memory write error, we can clear the condition */
1480 gdb_connection
->mem_write_error
= false;
1483 /* By replying the packet *immediately* GDB will send us a new packet
1484 * while we write the last one to the target.
1486 if (retval
== ERROR_OK
)
1487 gdb_put_packet(connection
, "OK", 2);
1489 retval
= gdb_error(connection
, retval
);
1490 if (retval
!= ERROR_OK
)
1495 LOG_DEBUG("addr: 0x%8.8" PRIx32
", len: 0x%8.8" PRIx32
"", addr
, len
);
1497 retval
= target_write_buffer(target
, addr
, len
, (uint8_t *)separator
);
1498 if (retval
!= ERROR_OK
)
1499 gdb_connection
->mem_write_error
= true;
1505 static int gdb_step_continue_packet(struct connection
*connection
,
1506 char *packet
, int packet_size
)
1508 struct target
*target
= get_target_from_connection(connection
);
1510 uint32_t address
= 0x0;
1511 int retval
= ERROR_OK
;
1515 if (packet_size
> 1) {
1516 packet
[packet_size
] = 0;
1517 address
= strtoul(packet
+ 1, NULL
, 16);
1521 gdb_running_type
= packet
[0];
1522 if (packet
[0] == 'c') {
1523 LOG_DEBUG("continue");
1524 /* resume at current address, don't handle breakpoints, not debugging */
1525 retval
= target_resume(target
, current
, address
, 0, 0);
1526 } else if (packet
[0] == 's') {
1528 /* step at current or address, don't handle breakpoints */
1529 retval
= target_step(target
, current
, address
, 0);
1534 static int gdb_breakpoint_watchpoint_packet(struct connection
*connection
,
1535 char *packet
, int packet_size
)
1537 struct target
*target
= get_target_from_connection(connection
);
1539 enum breakpoint_type bp_type
= BKPT_SOFT
/* dummy init to avoid warning */;
1540 enum watchpoint_rw wp_type
= WPT_READ
/* dummy init to avoid warning */;
1548 type
= strtoul(packet
+ 1, &separator
, 16);
1550 if (type
== 0) /* memory breakpoint */
1551 bp_type
= BKPT_SOFT
;
1552 else if (type
== 1) /* hardware breakpoint */
1553 bp_type
= BKPT_HARD
;
1554 else if (type
== 2) /* write watchpoint */
1555 wp_type
= WPT_WRITE
;
1556 else if (type
== 3) /* read watchpoint */
1558 else if (type
== 4) /* access watchpoint */
1559 wp_type
= WPT_ACCESS
;
1561 LOG_ERROR("invalid gdb watch/breakpoint type(%d), dropping connection", type
);
1562 return ERROR_SERVER_REMOTE_CLOSED
;
1565 if (gdb_breakpoint_override
&& ((bp_type
== BKPT_SOFT
) || (bp_type
== BKPT_HARD
)))
1566 bp_type
= gdb_breakpoint_override_type
;
1568 if (*separator
!= ',') {
1569 LOG_ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
1570 return ERROR_SERVER_REMOTE_CLOSED
;
1573 address
= strtoul(separator
+ 1, &separator
, 16);
1575 if (*separator
!= ',') {
1576 LOG_ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
1577 return ERROR_SERVER_REMOTE_CLOSED
;
1580 size
= strtoul(separator
+ 1, &separator
, 16);
1585 if (packet
[0] == 'Z') {
1586 retval
= breakpoint_add(target
, address
, size
, bp_type
);
1587 if (retval
!= ERROR_OK
) {
1588 retval
= gdb_error(connection
, retval
);
1589 if (retval
!= ERROR_OK
)
1592 gdb_put_packet(connection
, "OK", 2);
1594 breakpoint_remove(target
, address
);
1595 gdb_put_packet(connection
, "OK", 2);
1602 if (packet
[0] == 'Z') {
1603 retval
= watchpoint_add(target
, address
, size
, wp_type
, 0, 0xffffffffu
);
1604 if (retval
!= ERROR_OK
) {
1605 retval
= gdb_error(connection
, retval
);
1606 if (retval
!= ERROR_OK
)
1609 gdb_put_packet(connection
, "OK", 2);
1611 watchpoint_remove(target
, address
);
1612 gdb_put_packet(connection
, "OK", 2);
1623 /* print out a string and allocate more space as needed,
1624 * mainly used for XML at this point
1626 static void xml_printf(int *retval
, char **xml
, int *pos
, int *size
,
1627 const char *fmt
, ...)
1629 if (*retval
!= ERROR_OK
)
1634 if ((*xml
== NULL
) || (!first
)) {
1635 /* start by 0 to exercise all the code paths.
1636 * Need minimum 2 bytes to fit 1 char and 0 terminator. */
1638 *size
= *size
* 2 + 2;
1640 *xml
= realloc(*xml
, *size
);
1644 *retval
= ERROR_SERVER_REMOTE_CLOSED
;
1652 ret
= vsnprintf(*xml
+ *pos
, *size
- *pos
, fmt
, ap
);
1654 if ((ret
> 0) && ((ret
+ 1) < *size
- *pos
)) {
1658 /* there was just enough or not enough space, allocate more. */
1663 static int decode_xfer_read(char *buf
, char **annex
, int *ofs
, unsigned int *len
)
1667 /* Extract and NUL-terminate the annex. */
1669 while (*buf
&& *buf
!= ':')
1675 /* After the read marker and annex, qXfer looks like a
1676 * traditional 'm' packet. */
1678 *ofs
= strtoul(buf
, &separator
, 16);
1680 if (*separator
!= ',')
1683 *len
= strtoul(separator
+ 1, NULL
, 16);
1688 static int compare_bank(const void *a
, const void *b
)
1690 struct flash_bank
*b1
, *b2
;
1691 b1
= *((struct flash_bank
**)a
);
1692 b2
= *((struct flash_bank
**)b
);
1694 if (b1
->base
== b2
->base
)
1696 else if (b1
->base
> b2
->base
)
1702 static int gdb_memory_map(struct connection
*connection
,
1703 char *packet
, int packet_size
)
1705 /* We get away with only specifying flash here. Regions that are not
1706 * specified are treated as if we provided no memory map(if not we
1707 * could detect the holes and mark them as RAM).
1708 * Normally we only execute this code once, but no big deal if we
1709 * have to regenerate it a couple of times.
1712 struct target
*target
= get_target_from_connection(connection
);
1713 struct flash_bank
*p
;
1717 int retval
= ERROR_OK
;
1718 struct flash_bank
**banks
;
1722 uint32_t ram_start
= 0;
1724 int target_flash_banks
= 0;
1726 /* skip command character */
1729 offset
= strtoul(packet
, &separator
, 16);
1730 length
= strtoul(separator
+ 1, &separator
, 16);
1732 xml_printf(&retval
, &xml
, &pos
, &size
, "<memory-map>\n");
1734 /* Sort banks in ascending order. We need to report non-flash
1735 * memory as ram (or rather read/write) by default for GDB, since
1736 * it has no concept of non-cacheable read/write memory (i/o etc).
1738 * FIXME Most non-flash addresses are *NOT* RAM! Don't lie.
1739 * Current versions of GDB assume unlisted addresses are RAM...
1741 banks
= malloc(sizeof(struct flash_bank
*)*flash_get_bank_count());
1743 for (i
= 0; i
< flash_get_bank_count(); i
++) {
1744 p
= get_flash_bank_by_num_noprobe(i
);
1745 if (p
->target
!= target
)
1747 retval
= get_flash_bank_by_num(i
, &p
);
1748 if (retval
!= ERROR_OK
) {
1750 gdb_error(connection
, retval
);
1753 banks
[target_flash_banks
++] = p
;
1756 qsort(banks
, target_flash_banks
, sizeof(struct flash_bank
*),
1759 for (i
= 0; i
< target_flash_banks
; i
++) {
1761 unsigned sector_size
= 0;
1767 if (ram_start
< p
->base
)
1768 xml_printf(&retval
, &xml
, &pos
, &size
,
1769 "<memory type=\"ram\" start=\"0x%x\" "
1770 "length=\"0x%x\"/>\n",
1771 ram_start
, p
->base
- ram_start
);
1773 /* Report adjacent groups of same-size sectors. So for
1774 * example top boot CFI flash will list an initial region
1775 * with several large sectors (maybe 128KB) and several
1776 * smaller ones at the end (maybe 32KB). STR7 will have
1777 * regions with 8KB, 32KB, and 64KB sectors; etc.
1779 for (j
= 0; j
< p
->num_sectors
; j
++) {
1782 /* Maybe start a new group of sectors. */
1783 if (sector_size
== 0) {
1784 start
= p
->base
+ p
->sectors
[j
].offset
;
1785 xml_printf(&retval
, &xml
, &pos
, &size
,
1786 "<memory type=\"flash\" "
1789 sector_size
= p
->sectors
[j
].size
;
1792 /* Does this finish a group of sectors?
1793 * If not, continue an already-started group.
1795 if (j
== p
->num_sectors
- 1)
1796 group_len
= (p
->base
+ p
->size
) - start
;
1797 else if (p
->sectors
[j
+ 1].size
!= sector_size
)
1798 group_len
= p
->base
+ p
->sectors
[j
+ 1].offset
1803 xml_printf(&retval
, &xml
, &pos
, &size
,
1804 "length=\"0x%x\">\n"
1805 "<property name=\"blocksize\">"
1813 ram_start
= p
->base
+ p
->size
;
1817 xml_printf(&retval
, &xml
, &pos
, &size
,
1818 "<memory type=\"ram\" start=\"0x%x\" "
1819 "length=\"0x%x\"/>\n",
1820 ram_start
, 0-ram_start
);
1821 /* ELSE a flash chip could be at the very end of the 32 bit address
1822 * space, in which case ram_start will be precisely 0
1828 xml_printf(&retval
, &xml
, &pos
, &size
, "</memory-map>\n");
1830 if (retval
!= ERROR_OK
) {
1831 gdb_error(connection
, retval
);
1835 if (offset
+ length
> pos
)
1836 length
= pos
- offset
;
1838 char *t
= malloc(length
+ 1);
1840 memcpy(t
+ 1, xml
+ offset
, length
);
1841 gdb_put_packet(connection
, t
, length
+ 1);
1848 static const char *gdb_get_reg_type_name(enum reg_type type
)
1855 case REG_TYPE_INT16
:
1857 case REG_TYPE_INT32
:
1859 case REG_TYPE_INT64
:
1861 case REG_TYPE_INT128
:
1863 case REG_TYPE_UINT8
:
1865 case REG_TYPE_UINT16
:
1867 case REG_TYPE_UINT32
:
1869 case REG_TYPE_UINT64
:
1871 case REG_TYPE_UINT128
:
1873 case REG_TYPE_CODE_PTR
:
1875 case REG_TYPE_DATA_PTR
:
1877 case REG_TYPE_FLOAT
:
1879 case REG_TYPE_IEEE_SINGLE
:
1880 return "ieee_single";
1881 case REG_TYPE_IEEE_DOUBLE
:
1882 return "ieee_double";
1883 case REG_TYPE_ARCH_DEFINED
:
1884 return "int"; /* return arbitrary string to avoid compile warning. */
1887 return "int"; /* "int" as default value */
1890 static int gdb_generate_reg_type_description(struct target
*target
,
1891 char **tdesc
, int *pos
, int *size
, struct reg_data_type
*type
)
1893 int retval
= ERROR_OK
;
1895 if (type
->type_class
== REG_TYPE_CLASS_VECTOR
) {
1896 /* <vector id="id" type="type" count="count"/> */
1897 xml_printf(&retval
, tdesc
, pos
, size
,
1898 "<vector id=\"%s\" type=\"%s\" count=\"%d\"/>\n",
1899 type
->id
, type
->reg_type_vector
->type
->id
,
1900 type
->reg_type_vector
->count
);
1902 } else if (type
->type_class
== REG_TYPE_CLASS_UNION
) {
1904 * <field name="name" type="type"/> ...
1906 xml_printf(&retval
, tdesc
, pos
, size
,
1907 "<union id=\"%s\">\n",
1910 struct reg_data_type_union_field
*field
;
1911 field
= type
->reg_type_union
->fields
;
1912 while (field
!= NULL
) {
1913 xml_printf(&retval
, tdesc
, pos
, size
,
1914 "<field name=\"%s\" type=\"%s\"/>\n",
1915 field
->name
, field
->type
->id
);
1917 field
= field
->next
;
1920 xml_printf(&retval
, tdesc
, pos
, size
,
1923 } else if (type
->type_class
== REG_TYPE_CLASS_STRUCT
) {
1924 struct reg_data_type_struct_field
*field
;
1925 field
= type
->reg_type_struct
->fields
;
1927 if (field
->use_bitfields
) {
1928 /* <struct id="id" size="size">
1929 * <field name="name" start="start" end="end"/> ...
1931 xml_printf(&retval
, tdesc
, pos
, size
,
1932 "<struct id=\"%s\" size=\"%d\">\n",
1933 type
->id
, type
->reg_type_struct
->size
);
1934 while (field
!= NULL
) {
1935 xml_printf(&retval
, tdesc
, pos
, size
,
1936 "<field name=\"%s\" start=\"%d\" end=\"%d\"/>\n",
1937 field
->name
, field
->bitfield
->start
,
1938 field
->bitfield
->end
);
1940 field
= field
->next
;
1944 * <field name="name" type="type"/> ...
1946 xml_printf(&retval
, tdesc
, pos
, size
,
1947 "<struct id=\"%s\">\n",
1949 while (field
!= NULL
) {
1950 xml_printf(&retval
, tdesc
, pos
, size
,
1951 "<field name=\"%s\" type=\"%s\"/>\n",
1952 field
->name
, field
->type
->id
);
1954 field
= field
->next
;
1958 xml_printf(&retval
, tdesc
, pos
, size
,
1961 } else if (type
->type_class
== REG_TYPE_CLASS_FLAGS
) {
1962 /* <flags id="id" size="size">
1963 * <field name="name" start="start" end="end"/> ...
1965 xml_printf(&retval
, tdesc
, pos
, size
,
1966 "<flags id=\"%s\" size=\"%d\">\n",
1967 type
->id
, type
->reg_type_flags
->size
);
1969 struct reg_data_type_flags_field
*field
;
1970 field
= type
->reg_type_flags
->fields
;
1971 while (field
!= NULL
) {
1972 xml_printf(&retval
, tdesc
, pos
, size
,
1973 "<field name=\"%s\" start=\"%d\" end=\"%d\"/>\n",
1974 field
->name
, field
->bitfield
->start
, field
->bitfield
->end
);
1976 field
= field
->next
;
1979 xml_printf(&retval
, tdesc
, pos
, size
,
1987 /* Get a list of available target registers features. feature_list must
1988 * be freed by caller.
1990 static int get_reg_features_list(struct target
*target
, char **feature_list
[], int *feature_list_size
,
1991 struct reg
**reg_list
, int reg_list_size
)
1995 /* Start with only one element */
1996 *feature_list
= calloc(1, sizeof(char *));
1998 for (int i
= 0; i
< reg_list_size
; i
++) {
1999 if (reg_list
[i
]->exist
== false)
2002 if (reg_list
[i
]->feature
!= NULL
2003 && reg_list
[i
]->feature
->name
!= NULL
2004 && (strcmp(reg_list
[i
]->feature
->name
, ""))) {
2005 /* We found a feature, check if the feature is already in the
2006 * table. If not, allocate a new entry for the table and
2007 * put the new feature in it.
2009 for (int j
= 0; j
< (tbl_sz
+ 1); j
++) {
2010 if (!((*feature_list
)[j
])) {
2011 (*feature_list
)[tbl_sz
++] = strdup(reg_list
[i
]->feature
->name
);
2012 *feature_list
= realloc(*feature_list
, sizeof(char *) * (tbl_sz
+ 1));
2013 (*feature_list
)[tbl_sz
] = NULL
;
2016 if (!strcmp((*feature_list
)[j
], reg_list
[i
]->feature
->name
))
2023 if (feature_list_size
)
2024 *feature_list_size
= tbl_sz
;
2029 static int gdb_generate_target_description(struct target
*target
, char **tdesc_out
)
2031 int retval
= ERROR_OK
;
2032 struct reg
**reg_list
;
2038 retval
= target_get_gdb_reg_list(target
, ®_list
,
2039 ®_list_size
, REG_CLASS_ALL
);
2041 if (retval
!= ERROR_OK
) {
2042 LOG_ERROR("get register list failed");
2046 if (reg_list_size
<= 0) {
2051 char **features
= NULL
;
2052 /* Get a list of available target registers features */
2053 retval
= get_reg_features_list(target
, &features
, NULL
, reg_list
, reg_list_size
);
2054 if (retval
!= ERROR_OK
) {
2055 LOG_ERROR("Can't get the registers feature list");
2060 /* If we found some features associated with registers, create sections */
2061 int current_feature
= 0;
2063 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2064 "<?xml version=\"1.0\"?>\n"
2065 "<!DOCTYPE target SYSTEM \"gdb-target.dtd\">\n"
2066 "<target version=\"1.0\">\n");
2068 /* generate target description according to register list */
2069 if (features
!= NULL
) {
2070 while (features
[current_feature
]) {
2072 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2073 "<feature name=\"%s\">\n",
2074 features
[current_feature
]);
2077 for (i
= 0; i
< reg_list_size
; i
++) {
2079 if (reg_list
[i
]->exist
== false)
2082 if (strcmp(reg_list
[i
]->feature
->name
, features
[current_feature
]))
2085 const char *type_str
;
2086 if (reg_list
[i
]->reg_data_type
!= NULL
) {
2087 if (reg_list
[i
]->reg_data_type
->type
== REG_TYPE_ARCH_DEFINED
) {
2088 /* generate <type... first, if there are architecture-defined types. */
2089 gdb_generate_reg_type_description(target
, &tdesc
, &pos
, &size
,
2090 reg_list
[i
]->reg_data_type
);
2092 type_str
= reg_list
[i
]->reg_data_type
->id
;
2094 /* predefined type */
2095 type_str
= gdb_get_reg_type_name(
2096 reg_list
[i
]->reg_data_type
->type
);
2099 /* Default type is "int" */
2103 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2104 "<reg name=\"%s\"", reg_list
[i
]->name
);
2105 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2106 " bitsize=\"%d\"", reg_list
[i
]->size
);
2107 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2108 " regnum=\"%d\"", reg_list
[i
]->number
);
2109 if (reg_list
[i
]->caller_save
)
2110 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2111 " save-restore=\"yes\"");
2113 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2114 " save-restore=\"no\"");
2116 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2117 " type=\"%s\"", type_str
);
2119 if (reg_list
[i
]->group
!= NULL
)
2120 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2121 " group=\"%s\"", reg_list
[i
]->group
);
2123 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2127 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2134 xml_printf(&retval
, &tdesc
, &pos
, &size
,
2140 if (retval
== ERROR_OK
)
2148 static int gdb_get_target_description_chunk(struct target
*target
, struct target_desc_format
*target_desc
,
2149 char **chunk
, int32_t offset
, uint32_t length
)
2151 if (target_desc
== NULL
) {
2152 LOG_ERROR("Unable to Generate Target Description");
2156 char *tdesc
= target_desc
->tdesc
;
2157 uint32_t tdesc_length
= target_desc
->tdesc_length
;
2159 if (tdesc
== NULL
) {
2160 int retval
= gdb_generate_target_description(target
, &tdesc
);
2161 if (retval
!= ERROR_OK
) {
2162 LOG_ERROR("Unable to Generate Target Description");
2166 tdesc_length
= strlen(tdesc
);
2171 if (length
< (tdesc_length
- offset
))
2172 transfer_type
= 'm';
2174 transfer_type
= 'l';
2176 *chunk
= malloc(length
+ 2);
2177 if (*chunk
== NULL
) {
2178 LOG_ERROR("Unable to allocate memory");
2182 (*chunk
)[0] = transfer_type
;
2183 if (transfer_type
== 'm') {
2184 strncpy((*chunk
) + 1, tdesc
+ offset
, length
);
2185 (*chunk
)[1 + length
] = '\0';
2187 strncpy((*chunk
) + 1, tdesc
+ offset
, tdesc_length
- offset
);
2188 (*chunk
)[1 + (tdesc_length
- offset
)] = '\0';
2190 /* After gdb-server sends out last chunk, invalidate tdesc. */
2196 target_desc
->tdesc
= tdesc
;
2197 target_desc
->tdesc_length
= tdesc_length
;
2202 static int gdb_target_description_supported(struct target
*target
, int *supported
)
2204 int retval
= ERROR_OK
;
2205 struct reg
**reg_list
= NULL
;
2206 int reg_list_size
= 0;
2207 int feature_list_size
= 0;
2209 retval
= target_get_gdb_reg_list(target
, ®_list
,
2210 ®_list_size
, REG_CLASS_ALL
);
2211 if (retval
!= ERROR_OK
) {
2212 LOG_ERROR("get register list failed");
2216 if (reg_list_size
<= 0) {
2217 retval
= ERROR_FAIL
;
2221 char **features
= NULL
;
2222 /* Get a list of available target registers features */
2223 retval
= get_reg_features_list(target
, &features
, &feature_list_size
, reg_list
, reg_list_size
);
2224 if (retval
!= ERROR_OK
) {
2225 LOG_ERROR("Can't get the registers feature list");
2230 if (feature_list_size
)
2237 if (reg_list
!= NULL
)
2240 if (features
!= NULL
)
2246 static int gdb_query_packet(struct connection
*connection
,
2247 char *packet
, int packet_size
)
2249 struct command_context
*cmd_ctx
= connection
->cmd_ctx
;
2250 struct gdb_connection
*gdb_connection
= connection
->priv
;
2251 struct target
*target
= get_target_from_connection(connection
);
2253 if (strncmp(packet
, "qRcmd,", 6) == 0) {
2254 if (packet_size
> 6) {
2256 cmd
= malloc((packet_size
- 6) / 2 + 1);
2257 int len
= unhexify(cmd
, packet
+ 6, (packet_size
- 6) / 2);
2260 /* We want to print all debug output to GDB connection */
2261 log_add_callback(gdb_log_callback
, connection
);
2262 target_call_timer_callbacks_now();
2263 /* some commands need to know the GDB connection, make note of current
2264 * GDB connection. */
2265 current_gdb_connection
= gdb_connection
;
2266 command_run_line(cmd_ctx
, cmd
);
2267 current_gdb_connection
= NULL
;
2268 target_call_timer_callbacks_now();
2269 log_remove_callback(gdb_log_callback
, connection
);
2272 gdb_put_packet(connection
, "OK", 2);
2274 } else if (strncmp(packet
, "qCRC:", 5) == 0) {
2275 if (packet_size
> 5) {
2283 /* skip command character */
2286 addr
= strtoul(packet
, &separator
, 16);
2288 if (*separator
!= ',') {
2289 LOG_ERROR("incomplete read memory packet received, dropping connection");
2290 return ERROR_SERVER_REMOTE_CLOSED
;
2293 len
= strtoul(separator
+ 1, NULL
, 16);
2295 retval
= target_checksum_memory(target
, addr
, len
, &checksum
);
2297 if (retval
== ERROR_OK
) {
2298 snprintf(gdb_reply
, 10, "C%8.8" PRIx32
"", checksum
);
2299 gdb_put_packet(connection
, gdb_reply
, 9);
2301 retval
= gdb_error(connection
, retval
);
2302 if (retval
!= ERROR_OK
)
2308 } else if (strncmp(packet
, "qSupported", 10) == 0) {
2309 /* we currently support packet size and qXfer:memory-map:read (if enabled)
2310 * qXfer:features:read is supported for some targets */
2311 int retval
= ERROR_OK
;
2312 char *buffer
= NULL
;
2315 int gdb_target_desc_supported
= 0;
2317 /* we need to test that the target supports target descriptions */
2318 retval
= gdb_target_description_supported(target
, &gdb_target_desc_supported
);
2319 if (retval
!= ERROR_OK
) {
2320 LOG_INFO("Failed detecting Target Description Support, disabling");
2321 gdb_target_desc_supported
= 0;
2324 /* support may be disabled globally */
2325 if (gdb_use_target_description
== 0) {
2326 if (gdb_target_desc_supported
)
2327 LOG_WARNING("Target Descriptions Supported, but disabled");
2328 gdb_target_desc_supported
= 0;
2335 "PacketSize=%x;qXfer:memory-map:read%c;qXfer:features:read%c;QStartNoAckMode+",
2336 (GDB_BUFFER_SIZE
- 1),
2337 ((gdb_use_memory_map
== 1) && (flash_get_bank_count() > 0)) ? '+' : '-',
2338 (gdb_target_desc_supported
== 1) ? '+' : '-');
2340 if (retval
!= ERROR_OK
) {
2341 gdb_send_error(connection
, 01);
2345 gdb_put_packet(connection
, buffer
, strlen(buffer
));
2349 } else if ((strncmp(packet
, "qXfer:memory-map:read::", 23) == 0)
2350 && (flash_get_bank_count() > 0))
2351 return gdb_memory_map(connection
, packet
, packet_size
);
2352 else if (strncmp(packet
, "qXfer:features:read:", 20) == 0) {
2354 int retval
= ERROR_OK
;
2357 unsigned int length
;
2360 /* skip command character */
2363 if (decode_xfer_read(packet
, &annex
, &offset
, &length
) < 0) {
2364 gdb_send_error(connection
, 01);
2368 /* Target should prepare correct target description for annex.
2369 * The first character of returned xml is 'm' or 'l'. 'm' for
2370 * there are *more* chunks to transfer. 'l' for it is the *last*
2371 * chunk of target description.
2373 retval
= gdb_get_target_description_chunk(target
, &gdb_connection
->target_desc
,
2374 &xml
, offset
, length
);
2375 if (retval
!= ERROR_OK
) {
2376 gdb_error(connection
, retval
);
2380 gdb_put_packet(connection
, xml
, strlen(xml
));
2384 } else if (strncmp(packet
, "QStartNoAckMode", 15) == 0) {
2385 gdb_connection
->noack_mode
= 1;
2386 gdb_put_packet(connection
, "OK", 2);
2390 gdb_put_packet(connection
, "", 0);
2394 static int gdb_v_packet(struct connection
*connection
,
2395 char *packet
, int packet_size
)
2397 struct gdb_connection
*gdb_connection
= connection
->priv
;
2398 struct gdb_service
*gdb_service
= connection
->service
->priv
;
2401 /* if flash programming disabled - send a empty reply */
2403 if (gdb_flash_program
== 0) {
2404 gdb_put_packet(connection
, "", 0);
2408 if (strncmp(packet
, "vFlashErase:", 12) == 0) {
2410 unsigned long length
;
2412 char *parse
= packet
+ 12;
2413 if (*parse
== '\0') {
2414 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2415 return ERROR_SERVER_REMOTE_CLOSED
;
2418 addr
= strtoul(parse
, &parse
, 16);
2420 if (*(parse
++) != ',' || *parse
== '\0') {
2421 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2422 return ERROR_SERVER_REMOTE_CLOSED
;
2425 length
= strtoul(parse
, &parse
, 16);
2427 if (*parse
!= '\0') {
2428 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2429 return ERROR_SERVER_REMOTE_CLOSED
;
2432 /* assume all sectors need erasing - stops any problems
2433 * when flash_write is called multiple times */
2436 /* perform any target specific operations before the erase */
2437 target_call_event_callbacks(gdb_service
->target
,
2438 TARGET_EVENT_GDB_FLASH_ERASE_START
);
2440 /* vFlashErase:addr,length messages require region start and
2441 * end to be "block" aligned ... if padding is ever needed,
2442 * GDB will have become dangerously confused.
2444 result
= flash_erase_address_range(gdb_service
->target
,
2445 false, addr
, length
);
2447 /* perform any target specific operations after the erase */
2448 target_call_event_callbacks(gdb_service
->target
,
2449 TARGET_EVENT_GDB_FLASH_ERASE_END
);
2452 if (result
!= ERROR_OK
) {
2453 /* GDB doesn't evaluate the actual error number returned,
2454 * treat a failed erase as an I/O error
2456 gdb_send_error(connection
, EIO
);
2457 LOG_ERROR("flash_erase returned %i", result
);
2459 gdb_put_packet(connection
, "OK", 2);
2464 if (strncmp(packet
, "vFlashWrite:", 12) == 0) {
2467 unsigned long length
;
2468 char *parse
= packet
+ 12;
2470 if (*parse
== '\0') {
2471 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2472 return ERROR_SERVER_REMOTE_CLOSED
;
2474 addr
= strtoul(parse
, &parse
, 16);
2475 if (*(parse
++) != ':') {
2476 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2477 return ERROR_SERVER_REMOTE_CLOSED
;
2479 length
= packet_size
- (parse
- packet
);
2481 /* create a new image if there isn't already one */
2482 if (gdb_connection
->vflash_image
== NULL
) {
2483 gdb_connection
->vflash_image
= malloc(sizeof(struct image
));
2484 image_open(gdb_connection
->vflash_image
, "", "build");
2487 /* create new section with content from packet buffer */
2488 retval
= image_add_section(gdb_connection
->vflash_image
,
2489 addr
, length
, 0x0, (uint8_t *)parse
);
2490 if (retval
!= ERROR_OK
)
2493 gdb_put_packet(connection
, "OK", 2);
2498 if (strncmp(packet
, "vFlashDone", 10) == 0) {
2501 /* process the flashing buffer. No need to erase as GDB
2502 * always issues a vFlashErase first. */
2503 target_call_event_callbacks(gdb_service
->target
,
2504 TARGET_EVENT_GDB_FLASH_WRITE_START
);
2505 result
= flash_write(gdb_service
->target
, gdb_connection
->vflash_image
, &written
, 0);
2506 target_call_event_callbacks(gdb_service
->target
, TARGET_EVENT_GDB_FLASH_WRITE_END
);
2507 if (result
!= ERROR_OK
) {
2508 if (result
== ERROR_FLASH_DST_OUT_OF_BANK
)
2509 gdb_put_packet(connection
, "E.memtype", 9);
2511 gdb_send_error(connection
, EIO
);
2513 LOG_DEBUG("wrote %u bytes from vFlash image to flash", (unsigned)written
);
2514 gdb_put_packet(connection
, "OK", 2);
2517 image_close(gdb_connection
->vflash_image
);
2518 free(gdb_connection
->vflash_image
);
2519 gdb_connection
->vflash_image
= NULL
;
2524 gdb_put_packet(connection
, "", 0);
2528 static int gdb_detach(struct connection
*connection
)
2530 struct gdb_service
*gdb_service
= connection
->service
->priv
;
2532 target_call_event_callbacks(gdb_service
->target
, TARGET_EVENT_GDB_DETACH
);
2534 return gdb_put_packet(connection
, "OK", 2);
2537 /* The format of 'F' response packet is
2538 * Fretcode,errno,Ctrl-C flag;call-specific attachment
2540 static int gdb_fileio_response_packet(struct connection
*connection
,
2541 char *packet
, int packet_size
)
2543 struct target
*target
= get_target_from_connection(connection
);
2545 char *parsing_point
;
2546 int fileio_retcode
= strtoul(packet
+ 1, &separator
, 16);
2547 int fileio_errno
= 0;
2548 bool fileio_ctrl_c
= false;
2553 if (*separator
== ',') {
2554 parsing_point
= separator
+ 1;
2555 fileio_errno
= strtoul(parsing_point
, &separator
, 16);
2556 if (*separator
== ',') {
2557 if (*(separator
+ 1) == 'C') {
2558 /* TODO: process ctrl-c */
2559 fileio_ctrl_c
= true;
2564 LOG_DEBUG("File-I/O response, retcode: 0x%x, errno: 0x%x, ctrl-c: %s",
2565 fileio_retcode
, fileio_errno
, fileio_ctrl_c
? "true" : "false");
2567 retval
= target_gdb_fileio_end(target
, fileio_retcode
, fileio_errno
, fileio_ctrl_c
);
2568 if (retval
!= ERROR_OK
)
2571 /* After File-I/O ends, keep continue or step */
2572 if (gdb_running_type
== 'c')
2573 retval
= target_resume(target
, 1, 0x0, 0, 0);
2574 else if (gdb_running_type
== 's')
2575 retval
= target_step(target
, 1, 0x0, 0);
2577 retval
= ERROR_FAIL
;
2579 if (retval
!= ERROR_OK
)
2585 static void gdb_log_callback(void *priv
, const char *file
, unsigned line
,
2586 const char *function
, const char *string
)
2588 struct connection
*connection
= priv
;
2589 struct gdb_connection
*gdb_con
= connection
->priv
;
2591 if (gdb_con
->busy
) {
2592 /* do not reply this using the O packet */
2596 gdb_output_con(connection
, string
);
2599 static void gdb_sig_halted(struct connection
*connection
)
2602 snprintf(sig_reply
, 4, "T%2.2x", 2);
2603 gdb_put_packet(connection
, sig_reply
, 3);
2606 static int gdb_input_inner(struct connection
*connection
)
2608 /* Do not allocate this on the stack */
2609 static char gdb_packet_buffer
[GDB_BUFFER_SIZE
];
2611 struct gdb_service
*gdb_service
= connection
->service
->priv
;
2612 struct target
*target
= gdb_service
->target
;
2613 char *packet
= gdb_packet_buffer
;
2616 struct gdb_connection
*gdb_con
= connection
->priv
;
2617 static int extended_protocol
;
2619 /* drain input buffer. If one of the packets fail, then an error
2620 * packet is replied, if applicable.
2622 * This loop will terminate and the error code is returned.
2624 * The calling fn will check if this error is something that
2625 * can be recovered from, or if the connection must be closed.
2627 * If the error is recoverable, this fn is called again to
2628 * drain the rest of the buffer.
2631 packet_size
= GDB_BUFFER_SIZE
-1;
2632 retval
= gdb_get_packet(connection
, packet
, &packet_size
);
2633 if (retval
!= ERROR_OK
)
2636 /* terminate with zero */
2637 packet
[packet_size
] = 0;
2639 if (LOG_LEVEL_IS(LOG_LVL_DEBUG
)) {
2640 if (packet
[0] == 'X') {
2641 /* binary packets spew junk into the debug log stream */
2644 for (x
= 0; (x
< 49) && (packet
[x
] != ':'); x
++)
2647 LOG_DEBUG("received packet: '%s:<binary-data>'", buf
);
2649 LOG_DEBUG("received packet: '%s'", packet
);
2652 if (packet_size
> 0) {
2654 switch (packet
[0]) {
2655 case 'T': /* Is thread alive? */
2656 gdb_thread_packet(connection
, packet
, packet_size
);
2658 case 'H': /* Set current thread ( 'c' for step and continue,
2659 * 'g' for all other operations ) */
2660 gdb_thread_packet(connection
, packet
, packet_size
);
2664 retval
= gdb_thread_packet(connection
, packet
, packet_size
);
2665 if (retval
== GDB_THREAD_PACKET_NOT_CONSUMED
)
2666 retval
= gdb_query_packet(connection
, packet
, packet_size
);
2669 retval
= gdb_get_registers_packet(connection
, packet
, packet_size
);
2672 retval
= gdb_set_registers_packet(connection
, packet
, packet_size
);
2675 retval
= gdb_get_register_packet(connection
, packet
, packet_size
);
2678 retval
= gdb_set_register_packet(connection
, packet
, packet_size
);
2681 retval
= gdb_read_memory_packet(connection
, packet
, packet_size
);
2684 retval
= gdb_write_memory_packet(connection
, packet
, packet_size
);
2688 retval
= gdb_breakpoint_watchpoint_packet(connection
, packet
, packet_size
);
2691 gdb_last_signal_packet(connection
, packet
, packet_size
);
2696 gdb_thread_packet(connection
, packet
, packet_size
);
2697 log_add_callback(gdb_log_callback
, connection
);
2699 if (gdb_con
->mem_write_error
) {
2700 LOG_ERROR("Memory write failure!");
2702 /* now that we have reported the memory write error,
2703 * we can clear the condition */
2704 gdb_con
->mem_write_error
= false;
2707 bool nostep
= false;
2708 bool already_running
= false;
2709 if (target
->state
== TARGET_RUNNING
) {
2710 LOG_WARNING("WARNING! The target is already running. "
2711 "All changes GDB did to registers will be discarded! "
2712 "Waiting for target to halt.");
2713 already_running
= true;
2714 } else if (target
->state
!= TARGET_HALTED
) {
2715 LOG_WARNING("The target is not in the halted nor running stated, " \
2716 "stepi/continue ignored.");
2718 } else if ((packet
[0] == 's') && gdb_con
->sync
) {
2719 /* Hmm..... when you issue a continue in GDB, then a "stepi" is
2720 * sent by GDB first to OpenOCD, thus defeating the check to
2721 * make only the single stepping have the sync feature...
2724 LOG_WARNING("stepi ignored. GDB will now fetch the register state " \
2725 "from the target.");
2727 gdb_con
->sync
= false;
2729 if (!already_running
&& nostep
) {
2730 /* Either the target isn't in the halted state, then we can't
2731 * step/continue. This might be early setup, etc.
2733 * Or we want to allow GDB to pick up a fresh set of
2734 * register values without modifying the target state.
2737 gdb_sig_halted(connection
);
2739 /* stop forwarding log packets! */
2740 log_remove_callback(gdb_log_callback
, connection
);
2742 /* We're running/stepping, in which case we can
2743 * forward log output until the target is halted
2745 gdb_con
->frontend_state
= TARGET_RUNNING
;
2746 target_call_event_callbacks(target
, TARGET_EVENT_GDB_START
);
2748 if (!already_running
) {
2749 /* Here we don't want packet processing to stop even if this fails,
2750 * so we use a local variable instead of retval. */
2751 retval
= gdb_step_continue_packet(connection
, packet
, packet_size
);
2752 if (retval
!= ERROR_OK
) {
2753 /* we'll never receive a halted
2754 * condition... issue a false one..
2756 gdb_frontend_halted(target
, connection
);
2763 retval
= gdb_v_packet(connection
, packet
, packet_size
);
2766 retval
= gdb_detach(connection
);
2767 extended_protocol
= 0;
2770 retval
= gdb_write_memory_binary_packet(connection
, packet
, packet_size
);
2771 if (retval
!= ERROR_OK
)
2775 if (extended_protocol
!= 0) {
2776 gdb_con
->attached
= false;
2779 gdb_put_packet(connection
, "OK", 2);
2780 return ERROR_SERVER_REMOTE_CLOSED
;
2782 /* handle extended remote protocol */
2783 extended_protocol
= 1;
2784 gdb_put_packet(connection
, "OK", 2);
2787 /* handle extended restart packet */
2788 breakpoint_clear_target(gdb_service
->target
);
2789 watchpoint_clear_target(gdb_service
->target
);
2790 command_run_linef(connection
->cmd_ctx
, "ocd_gdb_restart %s",
2791 target_name(target
));
2792 /* set connection as attached after reset */
2793 gdb_con
->attached
= true;
2794 /* info rtos parts */
2795 gdb_thread_packet(connection
, packet
, packet_size
);
2799 /* packet supported only by smp target i.e cortex_a.c*/
2800 /* handle smp packet replying coreid played to gbd */
2801 gdb_read_smp_packet(connection
, packet
, packet_size
);
2805 /* packet supported only by smp target i.e cortex_a.c */
2806 /* handle smp packet setting coreid to be played at next
2808 gdb_write_smp_packet(connection
, packet
, packet_size
);
2812 /* File-I/O extension */
2813 /* After gdb uses host-side syscall to complete target file
2814 * I/O, gdb sends host-side syscall return value to target
2816 * The format of 'F' response packet is
2817 * Fretcode,errno,Ctrl-C flag;call-specific attachment
2819 gdb_con
->frontend_state
= TARGET_RUNNING
;
2820 log_add_callback(gdb_log_callback
, connection
);
2821 gdb_fileio_response_packet(connection
, packet
, packet_size
);
2825 /* ignore unknown packets */
2826 LOG_DEBUG("ignoring 0x%2.2x packet", packet
[0]);
2827 gdb_put_packet(connection
, NULL
, 0);
2831 /* if a packet handler returned an error, exit input loop */
2832 if (retval
!= ERROR_OK
)
2836 if (gdb_con
->ctrl_c
) {
2837 if (target
->state
== TARGET_RUNNING
) {
2838 retval
= target_halt(target
);
2839 if (retval
!= ERROR_OK
)
2840 target_call_event_callbacks(target
, TARGET_EVENT_GDB_HALT
);
2841 gdb_con
->ctrl_c
= 0;
2843 LOG_INFO("The target is not running when halt was requested, stopping GDB.");
2844 target_call_event_callbacks(target
, TARGET_EVENT_GDB_HALT
);
2848 } while (gdb_con
->buf_cnt
> 0);
2853 static int gdb_input(struct connection
*connection
)
2855 int retval
= gdb_input_inner(connection
);
2856 struct gdb_connection
*gdb_con
= connection
->priv
;
2857 if (retval
== ERROR_SERVER_REMOTE_CLOSED
)
2860 /* logging does not propagate the error, yet can set the gdb_con->closed flag */
2861 if (gdb_con
->closed
)
2862 return ERROR_SERVER_REMOTE_CLOSED
;
2864 /* we'll recover from any other errors(e.g. temporary timeouts, etc.) */
2868 static int gdb_target_start(struct target
*target
, const char *port
)
2870 struct gdb_service
*gdb_service
;
2872 gdb_service
= malloc(sizeof(struct gdb_service
));
2874 if (NULL
== gdb_service
)
2877 gdb_service
->target
= target
;
2878 gdb_service
->core
[0] = -1;
2879 gdb_service
->core
[1] = -1;
2880 target
->gdb_service
= gdb_service
;
2882 ret
= add_service("gdb",
2883 port
, 1, &gdb_new_connection
, &gdb_input
,
2884 &gdb_connection_closed
, gdb_service
);
2885 /* initialialize all targets gdb service with the same pointer */
2887 struct target_list
*head
;
2888 struct target
*curr
;
2889 head
= target
->head
;
2890 while (head
!= (struct target_list
*)NULL
) {
2891 curr
= head
->target
;
2893 curr
->gdb_service
= gdb_service
;
2900 static int gdb_target_add_one(struct target
*target
)
2902 /* one gdb instance per smp list */
2903 if ((target
->smp
) && (target
->gdb_service
))
2905 int retval
= gdb_target_start(target
, gdb_port_next
);
2906 if (retval
== ERROR_OK
) {
2908 /* If we can parse the port number
2909 * then we increment the port number for the next target.
2912 portnumber
= strtol(gdb_port_next
, &end
, 0);
2914 if (parse_long(gdb_port_next
, &portnumber
) == ERROR_OK
) {
2915 free(gdb_port_next
);
2916 gdb_port_next
= alloc_printf("%d", portnumber
+1);
2923 int gdb_target_add_all(struct target
*target
)
2925 if (NULL
== target
) {
2926 LOG_WARNING("gdb services need one or more targets defined");
2930 while (NULL
!= target
) {
2931 int retval
= gdb_target_add_one(target
);
2932 if (ERROR_OK
!= retval
)
2935 target
= target
->next
;
2941 COMMAND_HANDLER(handle_gdb_sync_command
)
2944 return ERROR_COMMAND_SYNTAX_ERROR
;
2946 if (current_gdb_connection
== NULL
) {
2947 command_print(CMD_CTX
,
2948 "gdb_sync command can only be run from within gdb using \"monitor gdb_sync\"");
2952 current_gdb_connection
->sync
= true;
2957 /* daemon configuration command gdb_port */
2958 COMMAND_HANDLER(handle_gdb_port_command
)
2960 int retval
= CALL_COMMAND_HANDLER(server_pipe_command
, &gdb_port
);
2961 if (ERROR_OK
== retval
) {
2962 free(gdb_port_next
);
2963 gdb_port_next
= strdup(gdb_port
);
2968 COMMAND_HANDLER(handle_gdb_memory_map_command
)
2971 return ERROR_COMMAND_SYNTAX_ERROR
;
2973 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], gdb_use_memory_map
);
2977 COMMAND_HANDLER(handle_gdb_flash_program_command
)
2980 return ERROR_COMMAND_SYNTAX_ERROR
;
2982 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], gdb_flash_program
);
2986 COMMAND_HANDLER(handle_gdb_report_data_abort_command
)
2989 return ERROR_COMMAND_SYNTAX_ERROR
;
2991 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], gdb_report_data_abort
);
2995 /* gdb_breakpoint_override */
2996 COMMAND_HANDLER(handle_gdb_breakpoint_override_command
)
2998 if (CMD_ARGC
== 0) {
3000 } else if (CMD_ARGC
== 1) {
3001 gdb_breakpoint_override
= 1;
3002 if (strcmp(CMD_ARGV
[0], "hard") == 0)
3003 gdb_breakpoint_override_type
= BKPT_HARD
;
3004 else if (strcmp(CMD_ARGV
[0], "soft") == 0)
3005 gdb_breakpoint_override_type
= BKPT_SOFT
;
3006 else if (strcmp(CMD_ARGV
[0], "disable") == 0)
3007 gdb_breakpoint_override
= 0;
3009 return ERROR_COMMAND_SYNTAX_ERROR
;
3010 if (gdb_breakpoint_override
)
3011 LOG_USER("force %s breakpoints",
3012 (gdb_breakpoint_override_type
== BKPT_HARD
) ? "hard" : "soft");
3014 LOG_USER("breakpoint type is not overridden");
3019 COMMAND_HANDLER(handle_gdb_target_description_command
)
3022 return ERROR_COMMAND_SYNTAX_ERROR
;
3024 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], gdb_use_target_description
);
3028 COMMAND_HANDLER(handle_gdb_save_tdesc_command
)
3031 uint32_t tdesc_length
;
3032 struct target
*target
= get_current_target(CMD_CTX
);
3034 int retval
= gdb_generate_target_description(target
, &tdesc
);
3035 if (retval
!= ERROR_OK
) {
3036 LOG_ERROR("Unable to Generate Target Description");
3040 tdesc_length
= strlen(tdesc
);
3042 struct fileio fileio
;
3043 size_t size_written
;
3045 char *tdesc_filename
= alloc_printf("%s.xml", target_type_name(target
));
3046 if (tdesc_filename
== NULL
) {
3047 retval
= ERROR_FAIL
;
3051 retval
= fileio_open(&fileio
, tdesc_filename
, FILEIO_WRITE
, FILEIO_TEXT
);
3053 if (retval
!= ERROR_OK
) {
3054 LOG_ERROR("Can't open %s for writing", tdesc_filename
);
3058 retval
= fileio_write(&fileio
, tdesc_length
, tdesc
, &size_written
);
3060 fileio_close(&fileio
);
3062 if (retval
!= ERROR_OK
)
3063 LOG_ERROR("Error while writing the tdesc file");
3066 free(tdesc_filename
);
3072 static const struct command_registration gdb_command_handlers
[] = {
3075 .handler
= handle_gdb_sync_command
,
3076 .mode
= COMMAND_ANY
,
3077 .help
= "next stepi will return immediately allowing "
3078 "GDB to fetch register state without affecting "
3084 .handler
= handle_gdb_port_command
,
3085 .mode
= COMMAND_ANY
,
3086 .help
= "Normally gdb listens to a TCP/IP port. Each subsequent GDB "
3087 "server listens for the next port number after the "
3088 "base port number specified. "
3089 "No arguments reports GDB port. \"pipe\" means listen to stdin "
3090 "output to stdout, an integer is base port number, \"disable\" disables "
3091 "port. Any other string is are interpreted as named pipe to listen to. "
3092 "Output pipe is the same name as input pipe, but with 'o' appended.",
3093 .usage
= "[port_num]",
3096 .name
= "gdb_memory_map",
3097 .handler
= handle_gdb_memory_map_command
,
3098 .mode
= COMMAND_CONFIG
,
3099 .help
= "enable or disable memory map",
3100 .usage
= "('enable'|'disable')"
3103 .name
= "gdb_flash_program",
3104 .handler
= handle_gdb_flash_program_command
,
3105 .mode
= COMMAND_CONFIG
,
3106 .help
= "enable or disable flash program",
3107 .usage
= "('enable'|'disable')"
3110 .name
= "gdb_report_data_abort",
3111 .handler
= handle_gdb_report_data_abort_command
,
3112 .mode
= COMMAND_CONFIG
,
3113 .help
= "enable or disable reporting data aborts",
3114 .usage
= "('enable'|'disable')"
3117 .name
= "gdb_breakpoint_override",
3118 .handler
= handle_gdb_breakpoint_override_command
,
3119 .mode
= COMMAND_ANY
,
3120 .help
= "Display or specify type of breakpoint "
3121 "to be used by gdb 'break' commands.",
3122 .usage
= "('hard'|'soft'|'disable')"
3125 .name
= "gdb_target_description",
3126 .handler
= handle_gdb_target_description_command
,
3127 .mode
= COMMAND_CONFIG
,
3128 .help
= "enable or disable target description",
3129 .usage
= "('enable'|'disable')"
3132 .name
= "gdb_save_tdesc",
3133 .handler
= handle_gdb_save_tdesc_command
,
3134 .mode
= COMMAND_EXEC
,
3135 .help
= "Save the target description file",
3137 COMMAND_REGISTRATION_DONE
3140 int gdb_register_commands(struct command_context
*cmd_ctx
)
3142 gdb_port
= strdup("3333");
3143 gdb_port_next
= strdup("3333");
3144 return register_commands(cmd_ctx
, NULL
, gdb_command_handlers
);