1 /***************************************************************************
2 * Copyright (C) 2009 Zachary T Welch *
3 * zw@superlucidity.net *
5 * Copyright (C) 2007,2008,2009 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2009 SoftPLC Corporation *
12 * Copyright (C) 2005 by Dominic Rath *
13 * Dominic.Rath@gmx.de *
15 * This program is free software; you can redistribute it and/or modify *
16 * it under the terms of the GNU General Public License as published by *
17 * the Free Software Foundation; either version 2 of the License, or *
18 * (at your option) any later version. *
20 * This program is distributed in the hope that it will be useful, *
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
23 * GNU General Public License for more details. *
25 * You should have received a copy of the GNU General Public License *
26 * along with this program; if not, write to the *
27 * Free Software Foundation, Inc., *
28 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
29 ***************************************************************************/
35 #include "interface.h"
36 #include "transport.h"
42 /* SVF and XSVF are higher level JTAG command sets (for boundary scan) */
44 #include "xsvf/xsvf.h"
46 /// The number of JTAG queue flushes (for profiling and debugging purposes).
47 static int jtag_flush_queue_count
;
49 // Sleep this # of ms after flushing the queue
50 static int jtag_flush_queue_sleep
= 0;
52 static void jtag_add_scan_check(struct jtag_tap
*active
,
53 void (*jtag_add_scan
)(struct jtag_tap
*active
, int in_num_fields
, const struct scan_field
*in_fields
, tap_state_t state
),
54 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
);
57 * The jtag_error variable is set when an error occurs while executing
58 * the queue. Application code may set this using jtag_set_error(),
59 * when an error occurs during processing that should be reported during
60 * jtag_execute_queue().
62 * The value is set and cleared, but never read by normal application code.
64 * This value is returned (and cleared) by jtag_execute_queue().
66 static int jtag_error
= ERROR_OK
;
68 static const char *jtag_event_strings
[] =
70 [JTAG_TRST_ASSERTED
] = "TAP reset",
71 [JTAG_TAP_EVENT_SETUP
] = "TAP setup",
72 [JTAG_TAP_EVENT_ENABLE
] = "TAP enabled",
73 [JTAG_TAP_EVENT_DISABLE
] = "TAP disabled",
77 * JTAG adapters must initialize with TRST and SRST de-asserted
78 * (they're negative logic, so that means *high*). But some
79 * hardware doesn't necessarily work that way ... so set things
80 * up so that jtag_init() always forces that state.
82 static int jtag_trst
= -1;
83 static int jtag_srst
= -1;
86 * List all TAPs that have been created.
88 static struct jtag_tap
*__jtag_all_taps
= NULL
;
90 * The number of TAPs in the __jtag_all_taps list, used to track the
91 * assigned chain position to new TAPs
93 static unsigned jtag_num_taps
= 0;
95 static enum reset_types jtag_reset_config
= RESET_NONE
;
96 tap_state_t cmd_queue_cur_state
= TAP_RESET
;
98 static bool jtag_verify_capture_ir
= true;
99 static int jtag_verify
= 1;
101 /* how long the OpenOCD should wait before attempting JTAG communication after reset lines deasserted (in ms) */
102 static int adapter_nsrst_delay
= 0; /* default to no nSRST delay */
103 static int jtag_ntrst_delay
= 0; /* default to no nTRST delay */
104 static int adapter_nsrst_assert_width
= 0; /* width of assertion */
105 static int jtag_ntrst_assert_width
= 0; /* width of assertion */
108 * Contains a single callback along with a pointer that will be passed
109 * when an event occurs.
111 struct jtag_event_callback
{
113 jtag_event_handler_t callback
;
114 /// the private data to pass to the callback
116 /// the next callback
117 struct jtag_event_callback
* next
;
120 /* callbacks to inform high-level handlers about JTAG state changes */
121 static struct jtag_event_callback
*jtag_event_callbacks
;
124 static int speed_khz
= 0;
125 /* speed to fallback to when RCLK is requested but not supported */
126 static int rclk_fallback_speed_khz
= 0;
127 static enum {CLOCK_MODE_SPEED
, CLOCK_MODE_KHZ
, CLOCK_MODE_RCLK
} clock_mode
;
128 static int jtag_speed
= 0;
130 static struct jtag_interface
*jtag
= NULL
;
133 const struct swd_driver
*swd
= NULL
;
136 struct jtag_interface
*jtag_interface
= NULL
;
138 void jtag_set_flush_queue_sleep(int ms
)
140 jtag_flush_queue_sleep
= ms
;
143 void jtag_set_error(int error
)
145 if ((error
== ERROR_OK
) || (jtag_error
!= ERROR_OK
))
150 int jtag_error_clear(void)
152 int temp
= jtag_error
;
153 jtag_error
= ERROR_OK
;
159 static bool jtag_poll
= 1;
161 bool is_jtag_poll_safe(void)
163 /* Polling can be disabled explicitly with set_enabled(false).
164 * It is also implicitly disabled while TRST is active and
165 * while SRST is gating the JTAG clock.
167 if (!jtag_poll
|| jtag_trst
!= 0)
169 return jtag_srst
== 0 || (jtag_reset_config
& RESET_SRST_NO_GATING
);
172 bool jtag_poll_get_enabled(void)
177 void jtag_poll_set_enabled(bool value
)
184 struct jtag_tap
*jtag_all_taps(void)
186 return __jtag_all_taps
;
189 unsigned jtag_tap_count(void)
191 return jtag_num_taps
;
194 unsigned jtag_tap_count_enabled(void)
196 struct jtag_tap
*t
= jtag_all_taps();
207 /// Append a new TAP to the chain of all taps.
208 void jtag_tap_add(struct jtag_tap
*t
)
210 t
->abs_chain_position
= jtag_num_taps
++;
212 struct jtag_tap
**tap
= &__jtag_all_taps
;
214 tap
= &(*tap
)->next_tap
;
218 /* returns a pointer to the n-th device in the scan chain */
219 struct jtag_tap
*jtag_tap_by_position(unsigned n
)
221 struct jtag_tap
*t
= jtag_all_taps();
229 struct jtag_tap
*jtag_tap_by_string(const char *s
)
231 /* try by name first */
232 struct jtag_tap
*t
= jtag_all_taps();
236 if (0 == strcmp(t
->dotted_name
, s
))
241 /* no tap found by name, so try to parse the name as a number */
243 if (parse_uint(s
, &n
) != ERROR_OK
)
246 /* FIXME remove this numeric fallback code late June 2010, along
247 * with all info in the User's Guide that TAPs have numeric IDs.
248 * Also update "scan_chain" output to not display the numbers.
250 t
= jtag_tap_by_position(n
);
252 LOG_WARNING("Specify TAP '%s' by name, not number %u",
258 struct jtag_tap
* jtag_tap_next_enabled(struct jtag_tap
* p
)
260 p
= p
? p
->next_tap
: jtag_all_taps();
270 const char *jtag_tap_name(const struct jtag_tap
*tap
)
272 return (tap
== NULL
) ? "(unknown)" : tap
->dotted_name
;
276 int jtag_register_event_callback(jtag_event_handler_t callback
, void *priv
)
278 struct jtag_event_callback
**callbacks_p
= &jtag_event_callbacks
;
280 if (callback
== NULL
)
282 return ERROR_INVALID_ARGUMENTS
;
287 while ((*callbacks_p
)->next
)
288 callbacks_p
= &((*callbacks_p
)->next
);
289 callbacks_p
= &((*callbacks_p
)->next
);
292 (*callbacks_p
) = malloc(sizeof(struct jtag_event_callback
));
293 (*callbacks_p
)->callback
= callback
;
294 (*callbacks_p
)->priv
= priv
;
295 (*callbacks_p
)->next
= NULL
;
300 int jtag_unregister_event_callback(jtag_event_handler_t callback
, void *priv
)
302 struct jtag_event_callback
**p
= &jtag_event_callbacks
, *temp
;
304 if (callback
== NULL
)
306 return ERROR_INVALID_ARGUMENTS
;
311 if (((*p
)->priv
!= priv
) || ((*p
)->callback
!= callback
))
325 int jtag_call_event_callbacks(enum jtag_event event
)
327 struct jtag_event_callback
*callback
= jtag_event_callbacks
;
329 LOG_DEBUG("jtag event: %s", jtag_event_strings
[event
]);
333 struct jtag_event_callback
*next
;
335 /* callback may remove itself */
336 next
= callback
->next
;
337 callback
->callback(event
, callback
->priv
);
344 static void jtag_checks(void)
346 assert(jtag_trst
== 0);
349 static void jtag_prelude(tap_state_t state
)
353 assert(state
!= TAP_INVALID
);
355 cmd_queue_cur_state
= state
;
358 void jtag_alloc_in_value32(struct scan_field
*field
)
360 interface_jtag_alloc_in_value32(field
);
363 void jtag_add_ir_scan_noverify(struct jtag_tap
*active
, const struct scan_field
*in_fields
,
368 int retval
= interface_jtag_add_ir_scan(active
, in_fields
, state
);
369 jtag_set_error(retval
);
372 static void jtag_add_ir_scan_noverify_callback(struct jtag_tap
*active
, int dummy
, const struct scan_field
*in_fields
,
375 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
378 void jtag_add_ir_scan(struct jtag_tap
*active
, struct scan_field
*in_fields
, tap_state_t state
)
380 assert(state
!= TAP_RESET
);
382 if (jtag_verify
&& jtag_verify_capture_ir
)
384 /* 8 x 32 bit id's is enough for all invocations */
386 /* if we are to run a verification of the ir scan, we need to get the input back.
387 * We may have to allocate space if the caller didn't ask for the input back.
389 in_fields
->check_value
= active
->expected
;
390 in_fields
->check_mask
= active
->expected_mask
;
391 jtag_add_scan_check(active
, jtag_add_ir_scan_noverify_callback
, 1, in_fields
, state
);
394 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
398 void jtag_add_plain_ir_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
401 assert(out_bits
!= NULL
);
402 assert(state
!= TAP_RESET
);
406 int retval
= interface_jtag_add_plain_ir_scan(
407 num_bits
, out_bits
, in_bits
, state
);
408 jtag_set_error(retval
);
411 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
412 uint8_t *in_check_mask
, int num_bits
);
414 static int jtag_check_value_mask_callback(jtag_callback_data_t data0
, jtag_callback_data_t data1
, jtag_callback_data_t data2
, jtag_callback_data_t data3
)
416 return jtag_check_value_inner((uint8_t *)data0
, (uint8_t *)data1
, (uint8_t *)data2
, (int)data3
);
419 static void jtag_add_scan_check(struct jtag_tap
*active
, void (*jtag_add_scan
)(struct jtag_tap
*active
, int in_num_fields
, const struct scan_field
*in_fields
, tap_state_t state
),
420 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
)
422 for (int i
= 0; i
< in_num_fields
; i
++)
424 struct scan_field
*field
= &in_fields
[i
];
425 field
->allocated
= 0;
427 if (field
->check_value
|| field
->in_value
)
429 interface_jtag_add_scan_check_alloc(field
);
433 jtag_add_scan(active
, in_num_fields
, in_fields
, state
);
435 for (int i
= 0; i
< in_num_fields
; i
++)
437 if ((in_fields
[i
].check_value
!= NULL
) && (in_fields
[i
].in_value
!= NULL
))
439 /* this is synchronous for a minidriver */
440 jtag_add_callback4(jtag_check_value_mask_callback
, (jtag_callback_data_t
)in_fields
[i
].in_value
,
441 (jtag_callback_data_t
)in_fields
[i
].check_value
,
442 (jtag_callback_data_t
)in_fields
[i
].check_mask
,
443 (jtag_callback_data_t
)in_fields
[i
].num_bits
);
445 if (in_fields
[i
].allocated
)
447 free(in_fields
[i
].in_value
);
449 if (in_fields
[i
].modified
)
451 in_fields
[i
].in_value
= NULL
;
456 void jtag_add_dr_scan_check(struct jtag_tap
*active
, int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
)
460 jtag_add_scan_check(active
, jtag_add_dr_scan
, in_num_fields
, in_fields
, state
);
463 jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
468 void jtag_add_dr_scan(struct jtag_tap
*active
, int in_num_fields
, const struct scan_field
*in_fields
,
471 assert(state
!= TAP_RESET
);
476 retval
= interface_jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
477 jtag_set_error(retval
);
480 void jtag_add_plain_dr_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
483 assert(out_bits
!= NULL
);
484 assert(state
!= TAP_RESET
);
489 retval
= interface_jtag_add_plain_dr_scan(num_bits
, out_bits
, in_bits
, state
);
490 jtag_set_error(retval
);
493 void jtag_add_tlr(void)
495 jtag_prelude(TAP_RESET
);
496 jtag_set_error(interface_jtag_add_tlr());
498 /* NOTE: order here matches TRST path in jtag_add_reset() */
499 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
500 jtag_notify_event(JTAG_TRST_ASSERTED
);
504 * If supported by the underlying adapter, this clocks a raw bit sequence
505 * onto TMS for switching betwen JTAG and SWD modes.
507 * DO NOT use this to bypass the integrity checks and logging provided
508 * by the jtag_add_pathmove() and jtag_add_statemove() calls.
510 * @param nbits How many bits to clock out.
511 * @param seq The bit sequence. The LSB is bit 0 of seq[0].
512 * @param state The JTAG tap state to record on completion. Use
513 * TAP_INVALID to represent being in in SWD mode.
515 * @todo Update naming conventions to stop assuming everything is JTAG.
517 int jtag_add_tms_seq(unsigned nbits
, const uint8_t *seq
, enum tap_state state
)
521 if (!(jtag
->supported
& DEBUG_CAP_TMS_SEQ
))
522 return ERROR_JTAG_NOT_IMPLEMENTED
;
525 cmd_queue_cur_state
= state
;
527 retval
= interface_add_tms_seq(nbits
, seq
, state
);
528 jtag_set_error(retval
);
532 void jtag_add_pathmove(int num_states
, const tap_state_t
*path
)
534 tap_state_t cur_state
= cmd_queue_cur_state
;
536 /* the last state has to be a stable state */
537 if (!tap_is_state_stable(path
[num_states
- 1]))
539 LOG_ERROR("BUG: TAP path doesn't finish in a stable state");
540 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
544 for (int i
= 0; i
< num_states
; i
++)
546 if (path
[i
] == TAP_RESET
)
548 LOG_ERROR("BUG: TAP_RESET is not a valid state for pathmove sequences");
549 jtag_set_error(ERROR_JTAG_STATE_INVALID
);
553 if (tap_state_transition(cur_state
, true) != path
[i
]
554 && tap_state_transition(cur_state
, false) != path
[i
])
556 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
557 tap_state_name(cur_state
), tap_state_name(path
[i
]));
558 jtag_set_error(ERROR_JTAG_TRANSITION_INVALID
);
566 jtag_set_error(interface_jtag_add_pathmove(num_states
, path
));
567 cmd_queue_cur_state
= path
[num_states
- 1];
570 int jtag_add_statemove(tap_state_t goal_state
)
572 tap_state_t cur_state
= cmd_queue_cur_state
;
574 if (goal_state
!= cur_state
)
576 LOG_DEBUG("cur_state=%s goal_state=%s",
577 tap_state_name(cur_state
),
578 tap_state_name(goal_state
));
581 /* If goal is RESET, be paranoid and force that that transition
582 * (e.g. five TCK cycles, TMS high). Else trust "cur_state".
584 if (goal_state
== TAP_RESET
)
586 else if (goal_state
== cur_state
)
587 /* nothing to do */ ;
589 else if (tap_is_state_stable(cur_state
) && tap_is_state_stable(goal_state
))
591 unsigned tms_bits
= tap_get_tms_path(cur_state
, goal_state
);
592 unsigned tms_count
= tap_get_tms_path_len(cur_state
, goal_state
);
593 tap_state_t moves
[8];
594 assert(tms_count
< ARRAY_SIZE(moves
));
596 for (unsigned i
= 0; i
< tms_count
; i
++, tms_bits
>>= 1)
598 bool bit
= tms_bits
& 1;
600 cur_state
= tap_state_transition(cur_state
, bit
);
601 moves
[i
] = cur_state
;
604 jtag_add_pathmove(tms_count
, moves
);
606 else if (tap_state_transition(cur_state
, true) == goal_state
607 || tap_state_transition(cur_state
, false) == goal_state
)
609 jtag_add_pathmove(1, &goal_state
);
618 void jtag_add_runtest(int num_cycles
, tap_state_t state
)
621 jtag_set_error(interface_jtag_add_runtest(num_cycles
, state
));
625 void jtag_add_clocks(int num_cycles
)
627 if (!tap_is_state_stable(cmd_queue_cur_state
))
629 LOG_ERROR("jtag_add_clocks() called with TAP in unstable state \"%s\"",
630 tap_state_name(cmd_queue_cur_state
));
631 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
638 jtag_set_error(interface_jtag_add_clocks(num_cycles
));
642 void jtag_add_reset(int req_tlr_or_trst
, int req_srst
)
644 int trst_with_tlr
= 0;
648 /* Without SRST, we must use target-specific JTAG operations
649 * on each target; callers should not be requesting SRST when
650 * that signal doesn't exist.
652 * RESET_SRST_PULLS_TRST is a board or chip level quirk, which
653 * can kick in even if the JTAG adapter can't drive TRST.
656 if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
657 LOG_ERROR("BUG: can't assert SRST");
658 jtag_set_error(ERROR_FAIL
);
661 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) != 0
662 && !req_tlr_or_trst
) {
663 LOG_ERROR("BUG: can't assert only SRST");
664 jtag_set_error(ERROR_FAIL
);
670 /* JTAG reset (entry to TAP_RESET state) can always be achieved
671 * using TCK and TMS; that may go through a TAP_{IR,DR}UPDATE
672 * state first. TRST accelerates it, and bypasses those states.
674 * RESET_TRST_PULLS_SRST is a board or chip level quirk, which
675 * can kick in even if the JTAG adapter can't drive SRST.
677 if (req_tlr_or_trst
) {
678 if (!(jtag_reset_config
& RESET_HAS_TRST
))
680 else if ((jtag_reset_config
& RESET_TRST_PULLS_SRST
) != 0
687 /* Maybe change TRST and/or SRST signal state */
688 if (jtag_srst
!= new_srst
|| jtag_trst
!= new_trst
) {
691 retval
= interface_jtag_add_reset(new_trst
, new_srst
);
692 if (retval
!= ERROR_OK
)
693 jtag_set_error(retval
);
695 retval
= jtag_execute_queue();
697 if (retval
!= ERROR_OK
) {
698 LOG_ERROR("TRST/SRST error");
703 /* SRST resets everything hooked up to that signal */
704 if (jtag_srst
!= new_srst
) {
705 jtag_srst
= new_srst
;
708 LOG_DEBUG("SRST line asserted");
709 if (adapter_nsrst_assert_width
)
710 jtag_add_sleep(adapter_nsrst_assert_width
* 1000);
713 LOG_DEBUG("SRST line released");
714 if (adapter_nsrst_delay
)
715 jtag_add_sleep(adapter_nsrst_delay
* 1000);
719 /* Maybe enter the JTAG TAP_RESET state ...
720 * - using only TMS, TCK, and the JTAG state machine
721 * - or else more directly, using TRST
723 * TAP_RESET should be invisible to non-debug parts of the system.
726 LOG_DEBUG("JTAG reset with TLR instead of TRST");
729 } else if (jtag_trst
!= new_trst
) {
730 jtag_trst
= new_trst
;
732 LOG_DEBUG("TRST line asserted");
733 tap_set_state(TAP_RESET
);
734 if (jtag_ntrst_assert_width
)
735 jtag_add_sleep(jtag_ntrst_assert_width
* 1000);
737 LOG_DEBUG("TRST line released");
738 if (jtag_ntrst_delay
)
739 jtag_add_sleep(jtag_ntrst_delay
* 1000);
741 /* We just asserted nTRST, so we're now in TAP_RESET.
742 * Inform possible listeners about this, now that
743 * JTAG instructions and data can be shifted. This
744 * sequence must match jtag_add_tlr().
746 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
747 jtag_notify_event(JTAG_TRST_ASSERTED
);
752 void jtag_add_sleep(uint32_t us
)
754 /// @todo Here, keep_alive() appears to be a layering violation!!!
756 jtag_set_error(interface_jtag_add_sleep(us
));
759 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
760 uint8_t *in_check_mask
, int num_bits
)
762 int retval
= ERROR_OK
;
766 compare_failed
= buf_cmp_mask(captured
, in_check_value
, in_check_mask
, num_bits
);
768 compare_failed
= buf_cmp(captured
, in_check_value
, num_bits
);
770 if (compare_failed
) {
771 char *captured_str
, *in_check_value_str
;
772 int bits
= (num_bits
> DEBUG_JTAG_IOZ
)
776 /* NOTE: we've lost diagnostic context here -- 'which tap' */
778 captured_str
= buf_to_str(captured
, bits
, 16);
779 in_check_value_str
= buf_to_str(in_check_value
, bits
, 16);
781 LOG_WARNING("Bad value '%s' captured during DR or IR scan:",
783 LOG_WARNING(" check_value: 0x%s", in_check_value_str
);
786 free(in_check_value_str
);
789 char *in_check_mask_str
;
791 in_check_mask_str
= buf_to_str(in_check_mask
, bits
, 16);
792 LOG_WARNING(" check_mask: 0x%s", in_check_mask_str
);
793 free(in_check_mask_str
);
796 retval
= ERROR_JTAG_QUEUE_FAILED
;
801 void jtag_check_value_mask(struct scan_field
*field
, uint8_t *value
, uint8_t *mask
)
803 assert(field
->in_value
!= NULL
);
807 /* no checking to do */
811 jtag_execute_queue_noclear();
813 int retval
= jtag_check_value_inner(field
->in_value
, value
, mask
, field
->num_bits
);
814 jtag_set_error(retval
);
819 int default_interface_jtag_execute_queue(void)
823 LOG_ERROR("No JTAG interface configured yet. "
824 "Issue 'init' command in startup scripts "
825 "before communicating with targets.");
829 return jtag
->execute_queue();
832 void jtag_execute_queue_noclear(void)
834 jtag_flush_queue_count
++;
835 jtag_set_error(interface_jtag_execute_queue());
837 if (jtag_flush_queue_sleep
> 0)
839 /* For debug purposes it can be useful to test performance
840 * or behavior when delaying after flushing the queue,
841 * e.g. to simulate long roundtrip times.
843 usleep(jtag_flush_queue_sleep
* 1000);
847 int jtag_get_flush_queue_count(void)
849 return jtag_flush_queue_count
;
852 int jtag_execute_queue(void)
854 jtag_execute_queue_noclear();
855 return jtag_error_clear();
858 static int jtag_reset_callback(enum jtag_event event
, void *priv
)
860 struct jtag_tap
*tap
= priv
;
862 if (event
== JTAG_TRST_ASSERTED
)
864 tap
->enabled
= !tap
->disabled_after_reset
;
866 /* current instruction is either BYPASS or IDCODE */
867 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
874 void jtag_sleep(uint32_t us
)
876 alive_sleep(us
/1000);
879 /* Maximum number of enabled JTAG devices we expect in the scan chain,
880 * plus one (to detect garbage at the end). Devices that don't support
881 * IDCODE take up fewer bits, possibly allowing a few more devices.
883 #define JTAG_MAX_CHAIN_SIZE 20
885 #define EXTRACT_MFG(X) (((X) & 0xffe) >> 1)
886 #define EXTRACT_PART(X) (((X) & 0xffff000) >> 12)
887 #define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28)
889 /* A reserved manufacturer ID is used in END_OF_CHAIN_FLAG, so we
890 * know that no valid TAP will have it as an IDCODE value.
892 #define END_OF_CHAIN_FLAG 0x000000ff
894 /* a larger IR length than we ever expect to autoprobe */
895 #define JTAG_IRLEN_MAX 60
897 static int jtag_examine_chain_execute(uint8_t *idcode_buffer
, unsigned num_idcode
)
899 struct scan_field field
= {
900 .num_bits
= num_idcode
* 32,
901 .out_value
= idcode_buffer
,
902 .in_value
= idcode_buffer
,
905 // initialize to the end of chain ID value
906 for (unsigned i
= 0; i
< JTAG_MAX_CHAIN_SIZE
; i
++)
907 buf_set_u32(idcode_buffer
, i
* 32, 32, END_OF_CHAIN_FLAG
);
909 jtag_add_plain_dr_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_DRPAUSE
);
911 return jtag_execute_queue();
914 static bool jtag_examine_chain_check(uint8_t *idcodes
, unsigned count
)
916 uint8_t zero_check
= 0x0;
917 uint8_t one_check
= 0xff;
919 for (unsigned i
= 0; i
< count
* 4; i
++)
921 zero_check
|= idcodes
[i
];
922 one_check
&= idcodes
[i
];
925 /* if there wasn't a single non-zero bit or if all bits were one,
926 * the scan is not valid. We wrote a mix of both values; either
928 * - There's a hardware issue (almost certainly):
929 * + all-zeroes can mean a target stuck in JTAG reset
930 * + all-ones tends to mean no target
931 * - The scan chain is WAY longer than we can handle, *AND* either
932 * + there are several hundreds of TAPs in bypass, or
933 * + at least a few dozen TAPs all have an all-ones IDCODE
935 if (zero_check
== 0x00 || one_check
== 0xff)
937 LOG_ERROR("JTAG scan chain interrogation failed: all %s",
938 (zero_check
== 0x00) ? "zeroes" : "ones");
939 LOG_ERROR("Check JTAG interface, timings, target power, etc.");
945 static void jtag_examine_chain_display(enum log_levels level
, const char *msg
,
946 const char *name
, uint32_t idcode
)
948 log_printf_lf(level
, __FILE__
, __LINE__
, __FUNCTION__
,
949 "JTAG tap: %s %16.16s: 0x%08x "
950 "(mfg: 0x%3.3x, part: 0x%4.4x, ver: 0x%1.1x)",
952 (unsigned int)idcode
,
953 (unsigned int)EXTRACT_MFG(idcode
),
954 (unsigned int)EXTRACT_PART(idcode
),
955 (unsigned int)EXTRACT_VER(idcode
));
958 static bool jtag_idcode_is_final(uint32_t idcode
)
961 * Some devices, such as AVR8, will output all 1's instead
962 * of TDI input value at end of chain. Allow those values
963 * instead of failing.
965 return idcode
== END_OF_CHAIN_FLAG
|| idcode
== 0xFFFFFFFF;
969 * This helper checks that remaining bits in the examined chain data are
970 * all as expected, but a single JTAG device requires only 64 bits to be
971 * read back correctly. This can help identify and diagnose problems
972 * with the JTAG chain earlier, gives more helpful/explicit error messages.
973 * Returns TRUE iff garbage was found.
975 static bool jtag_examine_chain_end(uint8_t *idcodes
, unsigned count
, unsigned max
)
977 bool triggered
= false;
978 for (; count
< max
- 31; count
+= 32)
980 uint32_t idcode
= buf_get_u32(idcodes
, count
, 32);
982 /* do not trigger the warning if the data looks good */
983 if (jtag_idcode_is_final(idcode
))
985 LOG_WARNING("Unexpected idcode after end of chain: %d 0x%08x",
986 count
, (unsigned int)idcode
);
992 static bool jtag_examine_chain_match_tap(const struct jtag_tap
*tap
)
994 uint32_t idcode
= tap
->idcode
;
996 /* ignore expected BYPASS codes; warn otherwise */
997 if (0 == tap
->expected_ids_cnt
&& !idcode
)
1000 /* optionally ignore the JTAG version field */
1001 uint32_t mask
= tap
->ignore_version
? ~(0xff << 24) : ~0;
1005 /* Loop over the expected identification codes and test for a match */
1006 unsigned ii
, limit
= tap
->expected_ids_cnt
;
1008 for (ii
= 0; ii
< limit
; ii
++)
1010 uint32_t expected
= tap
->expected_ids
[ii
] & mask
;
1012 if (idcode
== expected
)
1015 /* treat "-expected-id 0" as a "don't-warn" wildcard */
1016 if (0 == tap
->expected_ids
[ii
])
1020 /* If none of the expected ids matched, warn */
1021 jtag_examine_chain_display(LOG_LVL_WARNING
, "UNEXPECTED",
1022 tap
->dotted_name
, tap
->idcode
);
1023 for (ii
= 0; ii
< limit
; ii
++)
1027 snprintf(msg
, sizeof(msg
), "expected %u of %u", ii
+ 1, limit
);
1028 jtag_examine_chain_display(LOG_LVL_ERROR
, msg
,
1029 tap
->dotted_name
, tap
->expected_ids
[ii
]);
1034 /* Try to examine chain layout according to IEEE 1149.1 §12
1035 * This is called a "blind interrogation" of the scan chain.
1037 static int jtag_examine_chain(void)
1039 uint8_t idcode_buffer
[JTAG_MAX_CHAIN_SIZE
* 4];
1043 bool autoprobe
= false;
1045 /* DR scan to collect BYPASS or IDCODE register contents.
1046 * Then make sure the scan data has both ones and zeroes.
1048 LOG_DEBUG("DR scan interrogation for IDCODE/BYPASS");
1049 retval
= jtag_examine_chain_execute(idcode_buffer
, JTAG_MAX_CHAIN_SIZE
);
1050 if (retval
!= ERROR_OK
)
1052 if (!jtag_examine_chain_check(idcode_buffer
, JTAG_MAX_CHAIN_SIZE
))
1053 return ERROR_JTAG_INIT_FAILED
;
1055 /* point at the 1st tap */
1056 struct jtag_tap
*tap
= jtag_tap_next_enabled(NULL
);
1062 tap
&& bit_count
< (JTAG_MAX_CHAIN_SIZE
* 32) - 31;
1063 tap
= jtag_tap_next_enabled(tap
))
1065 uint32_t idcode
= buf_get_u32(idcode_buffer
, bit_count
, 32);
1067 if ((idcode
& 1) == 0)
1069 /* Zero for LSB indicates a device in bypass */
1070 LOG_INFO("TAP %s does not have IDCODE",
1073 tap
->hasidcode
= false;
1079 /* Friendly devices support IDCODE */
1080 tap
->hasidcode
= true;
1081 jtag_examine_chain_display(LOG_LVL_INFO
,
1083 tap
->dotted_name
, idcode
);
1087 tap
->idcode
= idcode
;
1089 /* ensure the TAP ID matches what was expected */
1090 if (!jtag_examine_chain_match_tap(tap
))
1091 retval
= ERROR_JTAG_INIT_SOFT_FAIL
;
1094 /* Fail if too many TAPs were enabled for us to verify them all. */
1096 LOG_ERROR("Too many TAPs enabled; '%s' ignored.",
1098 return ERROR_JTAG_INIT_FAILED
;
1101 /* if autoprobing, the tap list is still empty ... populate it! */
1102 while (autoprobe
&& bit_count
< (JTAG_MAX_CHAIN_SIZE
* 32) - 31) {
1106 /* Is there another TAP? */
1107 idcode
= buf_get_u32(idcode_buffer
, bit_count
, 32);
1108 if (jtag_idcode_is_final(idcode
))
1111 /* Default everything in this TAP except IR length.
1113 * REVISIT create a jtag_alloc(chip, tap) routine, and
1114 * share it with jim_newtap_cmd().
1116 tap
= calloc(1, sizeof *tap
);
1120 sprintf(buf
, "auto%d", tapcount
++);
1121 tap
->chip
= strdup(buf
);
1122 tap
->tapname
= strdup("tap");
1124 sprintf(buf
, "%s.%s", tap
->chip
, tap
->tapname
);
1125 tap
->dotted_name
= strdup(buf
);
1127 /* tap->ir_length == 0 ... signifying irlen autoprobe */
1128 tap
->ir_capture_mask
= 0x03;
1129 tap
->ir_capture_value
= 0x01;
1131 tap
->enabled
= true;
1133 if ((idcode
& 1) == 0) {
1135 tap
->hasidcode
= false;
1138 tap
->hasidcode
= true;
1139 tap
->idcode
= idcode
;
1141 tap
->expected_ids_cnt
= 1;
1142 tap
->expected_ids
= malloc(sizeof(uint32_t));
1143 tap
->expected_ids
[0] = idcode
;
1146 LOG_WARNING("AUTO %s - use \"jtag newtap "
1147 "%s %s -expected-id 0x%8.8" PRIx32
" ...\"",
1148 tap
->dotted_name
, tap
->chip
, tap
->tapname
,
1154 /* After those IDCODE or BYPASS register values should be
1155 * only the data we fed into the scan chain.
1157 if (jtag_examine_chain_end(idcode_buffer
, bit_count
,
1158 8 * sizeof(idcode_buffer
))) {
1159 LOG_ERROR("double-check your JTAG setup (interface, "
1160 "speed, missing TAPs, ...)");
1161 return ERROR_JTAG_INIT_FAILED
;
1164 /* Return success or, for backwards compatibility if only
1165 * some IDCODE values mismatched, a soft/continuable fault.
1171 * Validate the date loaded by entry to the Capture-IR state, to help
1172 * find errors related to scan chain configuration (wrong IR lengths)
1175 * Entry state can be anything. On non-error exit, all TAPs are in
1176 * bypass mode. On error exits, the scan chain is reset.
1178 static int jtag_validate_ircapture(void)
1180 struct jtag_tap
*tap
;
1181 int total_ir_length
= 0;
1182 uint8_t *ir_test
= NULL
;
1183 struct scan_field field
;
1188 /* when autoprobing, accomodate huge IR lengths */
1189 for (tap
= NULL
, total_ir_length
= 0;
1190 (tap
= jtag_tap_next_enabled(tap
)) != NULL
;
1191 total_ir_length
+= tap
->ir_length
) {
1192 if (tap
->ir_length
== 0)
1193 total_ir_length
+= JTAG_IRLEN_MAX
;
1196 /* increase length to add 2 bit sentinel after scan */
1197 total_ir_length
+= 2;
1199 ir_test
= malloc(DIV_ROUND_UP(total_ir_length
, 8));
1200 if (ir_test
== NULL
)
1203 /* after this scan, all TAPs will capture BYPASS instructions */
1204 buf_set_ones(ir_test
, total_ir_length
);
1206 field
.num_bits
= total_ir_length
;
1207 field
.out_value
= ir_test
;
1208 field
.in_value
= ir_test
;
1210 jtag_add_plain_ir_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_IDLE
);
1212 LOG_DEBUG("IR capture validation scan");
1213 retval
= jtag_execute_queue();
1214 if (retval
!= ERROR_OK
)
1221 tap
= jtag_tap_next_enabled(tap
);
1226 /* If we're autoprobing, guess IR lengths. They must be at
1227 * least two bits. Guessing will fail if (a) any TAP does
1228 * not conform to the JTAG spec; or (b) when the upper bits
1229 * captured from some conforming TAP are nonzero. Or if
1230 * (c) an IR length is longer than 32 bits -- which is only
1231 * an implementation limit, which could someday be raised.
1233 * REVISIT optimization: if there's a *single* TAP we can
1234 * lift restrictions (a) and (b) by scanning a recognizable
1235 * pattern before the all-ones BYPASS. Check for where the
1236 * pattern starts in the result, instead of an 0...01 value.
1238 * REVISIT alternative approach: escape to some tcl code
1239 * which could provide more knowledge, based on IDCODE; and
1240 * only guess when that has no success.
1242 if (tap
->ir_length
== 0) {
1244 while ((val
= buf_get_u32(ir_test
, chain_pos
,
1245 tap
->ir_length
+ 1)) == 1
1246 && tap
->ir_length
<= 32) {
1249 LOG_WARNING("AUTO %s - use \"... -irlen %d\"",
1250 jtag_tap_name(tap
), tap
->ir_length
);
1253 /* Validate the two LSBs, which must be 01 per JTAG spec.
1255 * Or ... more bits could be provided by TAP declaration.
1256 * Plus, some taps (notably in i.MX series chips) violate
1257 * this part of the JTAG spec, so their capture mask/value
1258 * attributes might disable this test.
1260 val
= buf_get_u32(ir_test
, chain_pos
, tap
->ir_length
);
1261 if ((val
& tap
->ir_capture_mask
) != tap
->ir_capture_value
) {
1262 LOG_ERROR("%s: IR capture error; saw 0x%0*x not 0x%0*x",
1264 (tap
->ir_length
+ 7) / tap
->ir_length
,
1266 (tap
->ir_length
+ 7) / tap
->ir_length
,
1267 (unsigned) tap
->ir_capture_value
);
1269 retval
= ERROR_JTAG_INIT_FAILED
;
1272 LOG_DEBUG("%s: IR capture 0x%0*x", jtag_tap_name(tap
),
1273 (tap
->ir_length
+ 7) / tap
->ir_length
, val
);
1274 chain_pos
+= tap
->ir_length
;
1277 /* verify the '11' sentinel we wrote is returned at the end */
1278 val
= buf_get_u32(ir_test
, chain_pos
, 2);
1281 char *cbuf
= buf_to_str(ir_test
, total_ir_length
, 16);
1283 LOG_ERROR("IR capture error at bit %d, saw 0x%s not 0x...3",
1286 retval
= ERROR_JTAG_INIT_FAILED
;
1291 if (retval
!= ERROR_OK
) {
1293 jtag_execute_queue();
1299 void jtag_tap_init(struct jtag_tap
*tap
)
1301 unsigned ir_len_bits
;
1302 unsigned ir_len_bytes
;
1304 /* if we're autoprobing, cope with potentially huge ir_length */
1305 ir_len_bits
= tap
->ir_length
? : JTAG_IRLEN_MAX
;
1306 ir_len_bytes
= DIV_ROUND_UP(ir_len_bits
, 8);
1308 tap
->expected
= calloc(1, ir_len_bytes
);
1309 tap
->expected_mask
= calloc(1, ir_len_bytes
);
1310 tap
->cur_instr
= malloc(ir_len_bytes
);
1312 /// @todo cope better with ir_length bigger than 32 bits
1313 if (ir_len_bits
> 32)
1316 buf_set_u32(tap
->expected
, 0, ir_len_bits
, tap
->ir_capture_value
);
1317 buf_set_u32(tap
->expected_mask
, 0, ir_len_bits
, tap
->ir_capture_mask
);
1319 // TAP will be in bypass mode after jtag_validate_ircapture()
1321 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
1323 // register the reset callback for the TAP
1324 jtag_register_event_callback(&jtag_reset_callback
, tap
);
1326 LOG_DEBUG("Created Tap: %s @ abs position %d, "
1327 "irlen %d, capture: 0x%x mask: 0x%x", tap
->dotted_name
,
1328 tap
->abs_chain_position
, tap
->ir_length
,
1329 (unsigned) tap
->ir_capture_value
,
1330 (unsigned) tap
->ir_capture_mask
);
1334 void jtag_tap_free(struct jtag_tap
*tap
)
1336 jtag_unregister_event_callback(&jtag_reset_callback
, tap
);
1338 /// @todo is anything missing? no memory leaks please
1339 free((void *)tap
->expected
);
1340 free((void *)tap
->expected_ids
);
1341 free((void *)tap
->chip
);
1342 free((void *)tap
->tapname
);
1343 free((void *)tap
->dotted_name
);
1348 * Do low-level setup like initializing registers, output signals,
1351 int adapter_init(struct command_context
*cmd_ctx
)
1356 if (!jtag_interface
)
1358 /* nothing was previously specified by "interface" command */
1359 LOG_ERROR("Debug Adapter has to be specified, "
1360 "see \"interface\" command");
1361 return ERROR_JTAG_INVALID_INTERFACE
;
1364 jtag
= jtag_interface
;
1365 if (jtag_interface
->init() != ERROR_OK
)
1368 return ERROR_JTAG_INIT_FAILED
;
1371 /* LEGACY SUPPORT ... adapter drivers must declare what
1372 * transports they allow. Until they all do so, assume
1373 * the legacy drivers are JTAG-only
1375 if (!transports_are_declared()) {
1376 LOG_ERROR("Adapter driver '%s' did not declare "
1377 "which transports it allows; assuming "
1378 "JTAG-only", jtag
->name
);
1379 int retval
= allow_transports(cmd_ctx
, jtag_only
);
1380 if (retval
!= ERROR_OK
)
1384 int requested_khz
= jtag_get_speed_khz();
1385 int actual_khz
= requested_khz
;
1387 int retval
= jtag_get_speed(&jtag_speed_var
);
1388 if (retval
!= ERROR_OK
)
1390 retval
= jtag_get_speed_readable(&actual_khz
);
1391 if (ERROR_OK
!= retval
)
1392 LOG_INFO("adapter-specific clock speed value %d", jtag_speed_var
);
1393 else if (actual_khz
)
1395 /* Adaptive clocking -- JTAG-specific */
1396 if ((CLOCK_MODE_RCLK
== clock_mode
)
1397 || ((CLOCK_MODE_KHZ
== clock_mode
) && !requested_khz
))
1399 LOG_INFO("RCLK (adaptive clock speed) not supported - fallback to %d kHz"
1403 LOG_INFO("clock speed %d kHz", actual_khz
);
1406 LOG_INFO("RCLK (adaptive clock speed)");
1411 int jtag_init_inner(struct command_context
*cmd_ctx
)
1413 struct jtag_tap
*tap
;
1415 bool issue_setup
= true;
1417 LOG_DEBUG("Init JTAG chain");
1419 tap
= jtag_tap_next_enabled(NULL
);
1421 /* Once JTAG itself is properly set up, and the scan chain
1422 * isn't absurdly large, IDCODE autoprobe should work fine.
1424 * But ... IRLEN autoprobe can fail even on systems which
1425 * are fully conformant to JTAG. Also, JTAG setup can be
1426 * quite finicky on some systems.
1428 * REVISIT: if TAP autoprobe works OK, then in many cases
1429 * we could escape to tcl code and set up targets based on
1430 * the TAP's IDCODE values.
1432 LOG_WARNING("There are no enabled taps. "
1433 "AUTO PROBING MIGHT NOT WORK!!");
1435 /* REVISIT default clock will often be too fast ... */
1439 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1442 /* Examine DR values first. This discovers problems which will
1443 * prevent communication ... hardware issues like TDO stuck, or
1444 * configuring the wrong number of (enabled) TAPs.
1446 retval
= jtag_examine_chain();
1449 /* complete success */
1452 /* For backward compatibility reasons, try coping with
1453 * configuration errors involving only ID mismatches.
1454 * We might be able to talk to the devices.
1456 * Also the device might be powered down during startup.
1458 * After OpenOCD starts, we can try to power on the device
1461 LOG_ERROR("Trying to use configured scan chain anyway...");
1462 issue_setup
= false;
1466 /* Now look at IR values. Problems here will prevent real
1467 * communication. They mostly mean that the IR length is
1468 * wrong ... or that the IR capture value is wrong. (The
1469 * latter is uncommon, but easily worked around: provide
1470 * ircapture/irmask values during TAP setup.)
1472 retval
= jtag_validate_ircapture();
1473 if (retval
!= ERROR_OK
)
1475 /* The target might be powered down. The user
1476 * can power it up and reset it after firing
1479 issue_setup
= false;
1483 jtag_notify_event(JTAG_TAP_EVENT_SETUP
);
1485 LOG_WARNING("Bypassing JTAG setup events due to errors");
1491 int adapter_quit(void)
1493 if (!jtag
|| !jtag
->quit
)
1496 // close the JTAG interface
1497 int result
= jtag
->quit();
1498 if (ERROR_OK
!= result
)
1499 LOG_ERROR("failed: %d", result
);
1505 int jtag_init_reset(struct command_context
*cmd_ctx
)
1509 if ((retval
= adapter_init(cmd_ctx
)) != ERROR_OK
)
1512 LOG_DEBUG("Initializing with hard TRST+SRST reset");
1515 * This procedure is used by default when OpenOCD triggers a reset.
1516 * It's now done through an overridable Tcl "init_reset" wrapper.
1518 * This started out as a more powerful "get JTAG working" reset than
1519 * jtag_init_inner(), applying TRST because some chips won't activate
1520 * JTAG without a TRST cycle (presumed to be async, though some of
1521 * those chips synchronize JTAG activation using TCK).
1523 * But some chips only activate JTAG as part of an SRST cycle; SRST
1524 * got mixed in. So it became a hard reset routine, which got used
1525 * in more places, and which coped with JTAG reset being forced as
1526 * part of SRST (srst_pulls_trst).
1528 * And even more corner cases started to surface: TRST and/or SRST
1529 * assertion timings matter; some chips need other JTAG operations;
1530 * TRST/SRST sequences can need to be different from these, etc.
1532 * Systems should override that wrapper to support system-specific
1533 * requirements that this not-fully-generic code doesn't handle.
1535 * REVISIT once Tcl code can read the reset_config modes, this won't
1536 * need to be a C routine at all...
1538 jtag_add_reset(1, 0); /* TAP_RESET, using TMS+TCK or TRST */
1539 if (jtag_reset_config
& RESET_HAS_SRST
)
1541 jtag_add_reset(1, 1);
1542 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) == 0)
1543 jtag_add_reset(0, 1);
1545 jtag_add_reset(0, 0);
1546 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1549 /* Check that we can communication on the JTAG chain + eventually we want to
1550 * be able to perform enumeration only after OpenOCD has started
1551 * telnet and GDB server
1553 * That would allow users to more easily perform any magic they need to before
1556 return jtag_init_inner(cmd_ctx
);
1559 int jtag_init(struct command_context
*cmd_ctx
)
1563 if ((retval
= adapter_init(cmd_ctx
)) != ERROR_OK
)
1566 /* guard against oddball hardware: force resets to be inactive */
1567 jtag_add_reset(0, 0);
1568 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1571 if (Jim_Eval_Named(cmd_ctx
->interp
, "jtag_init", __FILE__
, __LINE__
) != JIM_OK
)
1577 unsigned jtag_get_speed_khz(void)
1582 static int adapter_khz_to_speed(unsigned khz
, int* speed
)
1584 LOG_DEBUG("convert khz to interface specific speed value");
1588 LOG_DEBUG("have interface set up");
1590 int retval
= jtag
->khz(jtag_get_speed_khz(), &speed_div1
);
1591 if (ERROR_OK
!= retval
)
1595 *speed
= speed_div1
;
1600 static int jtag_rclk_to_speed(unsigned fallback_speed_khz
, int* speed
)
1602 int retval
= adapter_khz_to_speed(0, speed
);
1603 if ((ERROR_OK
!= retval
) && fallback_speed_khz
)
1605 LOG_DEBUG("trying fallback speed...");
1606 retval
= adapter_khz_to_speed(fallback_speed_khz
, speed
);
1611 static int jtag_set_speed(int speed
)
1614 /* this command can be called during CONFIG,
1615 * in which case jtag isn't initialized */
1616 return jtag
? jtag
->speed(speed
) : ERROR_OK
;
1619 int jtag_config_khz(unsigned khz
)
1621 LOG_DEBUG("handle jtag khz");
1622 clock_mode
= CLOCK_MODE_KHZ
;
1624 int retval
= adapter_khz_to_speed(khz
, &speed
);
1625 return (ERROR_OK
!= retval
) ? retval
: jtag_set_speed(speed
);
1628 int jtag_config_rclk(unsigned fallback_speed_khz
)
1630 LOG_DEBUG("handle jtag rclk");
1631 clock_mode
= CLOCK_MODE_RCLK
;
1632 rclk_fallback_speed_khz
= fallback_speed_khz
;
1634 int retval
= jtag_rclk_to_speed(fallback_speed_khz
, &speed
);
1635 return (ERROR_OK
!= retval
) ? retval
: jtag_set_speed(speed
);
1638 int jtag_get_speed(int *speed
)
1642 case CLOCK_MODE_SPEED
:
1643 *speed
= jtag_speed
;
1645 case CLOCK_MODE_KHZ
:
1646 adapter_khz_to_speed(jtag_get_speed_khz(), speed
);
1648 case CLOCK_MODE_RCLK
:
1649 jtag_rclk_to_speed(rclk_fallback_speed_khz
, speed
);
1652 LOG_ERROR("BUG: unknown jtag clock mode");
1658 int jtag_get_speed_readable(int *khz
)
1661 int retval
= jtag_get_speed(&jtag_speed_var
);
1662 if (retval
!= ERROR_OK
)
1664 return jtag
? jtag
->speed_div(jtag_speed_var
, khz
) : ERROR_OK
;
1667 void jtag_set_verify(bool enable
)
1669 jtag_verify
= enable
;
1672 bool jtag_will_verify()
1677 void jtag_set_verify_capture_ir(bool enable
)
1679 jtag_verify_capture_ir
= enable
;
1682 bool jtag_will_verify_capture_ir()
1684 return jtag_verify_capture_ir
;
1687 int jtag_power_dropout(int *dropout
)
1691 /* TODO: as the jtag interface is not valid all
1692 * we can do at the moment is exit OpenOCD */
1693 LOG_ERROR("No Valid JTAG Interface Configured.");
1696 return jtag
->power_dropout(dropout
);
1699 int jtag_srst_asserted(int *srst_asserted
)
1701 return jtag
->srst_asserted(srst_asserted
);
1704 enum reset_types
jtag_get_reset_config(void)
1706 return jtag_reset_config
;
1708 void jtag_set_reset_config(enum reset_types type
)
1710 jtag_reset_config
= type
;
1713 int jtag_get_trst(void)
1717 int jtag_get_srst(void)
1722 void jtag_set_nsrst_delay(unsigned delay
)
1724 adapter_nsrst_delay
= delay
;
1726 unsigned jtag_get_nsrst_delay(void)
1728 return adapter_nsrst_delay
;
1730 void jtag_set_ntrst_delay(unsigned delay
)
1732 jtag_ntrst_delay
= delay
;
1734 unsigned jtag_get_ntrst_delay(void)
1736 return jtag_ntrst_delay
;
1740 void jtag_set_nsrst_assert_width(unsigned delay
)
1742 adapter_nsrst_assert_width
= delay
;
1744 unsigned jtag_get_nsrst_assert_width(void)
1746 return adapter_nsrst_assert_width
;
1748 void jtag_set_ntrst_assert_width(unsigned delay
)
1750 jtag_ntrst_assert_width
= delay
;
1752 unsigned jtag_get_ntrst_assert_width(void)
1754 return jtag_ntrst_assert_width
;
1757 static int jtag_select(struct command_context
*ctx
)
1761 /* NOTE: interface init must already have been done.
1762 * That works with only C code ... no Tcl glue required.
1765 retval
= jtag_register_commands(ctx
);
1767 if (retval
!= ERROR_OK
)
1770 retval
= svf_register_commands(ctx
);
1772 if (retval
!= ERROR_OK
)
1775 return xsvf_register_commands(ctx
);
1778 static struct transport jtag_transport
= {
1780 .select
= jtag_select
,
1784 static void jtag_constructor(void) __attribute__((constructor
));
1785 static void jtag_constructor(void)
1787 transport_register(&jtag_transport
);
1790 /** Returns true if the current debug session
1791 * is using JTAG as its transport.
1793 bool transport_is_jtag(void)
1795 return get_current_transport() == &jtag_transport
;
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)