1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
17 ***************************************************************************/
19 #ifndef OPENOCD_FLASH_NOR_CFI_H
20 #define OPENOCD_FLASH_NOR_CFI_H
22 #define CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7 0xE0 /* DQ5..DQ7 */
23 #define CFI_STATUS_POLL_MASK_DQ6_DQ7 0xC0 /* DQ6..DQ7 */
25 struct cfi_flash_bank
{
31 enum target_endianness endianness
;
34 uint16_t manufacturer
;
39 /* identification string */
45 /* device-system interface */
50 uint8_t word_write_timeout_typ
;
51 uint8_t buf_write_timeout_typ
;
52 uint8_t block_erase_timeout_typ
;
53 uint8_t chip_erase_timeout_typ
;
54 uint8_t word_write_timeout_max
;
55 uint8_t buf_write_timeout_max
;
56 uint8_t block_erase_timeout_max
;
57 uint8_t chip_erase_timeout_max
;
59 uint8_t status_poll_mask
;
63 uint16_t interface_desc
;
64 uint16_t max_buf_write_size
;
65 uint8_t num_erase_regions
;
66 uint32_t *erase_region_info
;
71 /* calculated timeouts */
72 unsigned word_write_timeout
;
73 unsigned buf_write_timeout
;
74 unsigned block_erase_timeout
;
75 unsigned chip_erase_timeout
;
77 /* memory accessors */
78 int (*write_mem
)(struct flash_bank
*bank
, target_addr_t addr
,
79 uint32_t count
, const uint8_t *buffer
);
80 int (*read_mem
)(struct flash_bank
*bank
, target_addr_t addr
,
81 uint32_t count
, uint8_t *buffer
);
84 /* Intel primary extended query table
85 * as defined for the Advanced+ Boot Block Flash Memory (C3)
86 * and used by the linux kernel cfi driver (as of 2.6.14)
88 struct cfi_intel_pri_ext
{
90 uint8_t major_version
;
91 uint8_t minor_version
;
92 uint32_t feature_support
;
93 uint8_t suspend_cmd_support
;
94 uint16_t blk_status_reg_mask
;
97 uint8_t num_protection_fields
;
98 uint16_t prot_reg_addr
;
99 uint8_t fact_prot_reg_size
;
100 uint8_t user_prot_reg_size
;
104 /* Spansion primary extended query table as defined for and used by
105 * the linux kernel cfi driver (as of 2.6.15)
107 struct cfi_spansion_pri_ext
{
109 uint8_t major_version
;
110 uint8_t minor_version
;
111 uint8_t silicon_revision
; /* bits 1-0: Address Sensitive Unlock */
112 uint8_t erase_suspend
;
114 uint8_t tmp_blk_unprotected
;
115 uint8_t blk_prot_unprot
;
116 uint8_t simultaneous_ops
;
122 int _reversed_geometry
;
127 /* Atmel primary extended query table as defined for and used by
128 * the linux kernel cfi driver (as of 2.6.20+)
130 struct cfi_atmel_pri_ext
{
132 uint8_t major_version
;
133 uint8_t minor_version
;
142 CFI_UNLOCK_5555_2AAA
,
145 struct cfi_unlock_addresses
{
153 void (*fixup
)(struct flash_bank
*bank
, const void *param
);
157 int cfi_erase(struct flash_bank
*bank
, unsigned int first
, unsigned int last
);
158 int cfi_protect(struct flash_bank
*bank
, int set
, unsigned int first
,
160 int cfi_probe(struct flash_bank
*bank
);
161 int cfi_auto_probe(struct flash_bank
*bank
);
162 int cfi_protect_check(struct flash_bank
*bank
);
163 int cfi_get_info(struct flash_bank
*bank
, struct command_invocation
*cmd
);
164 int cfi_flash_bank_cmd(struct flash_bank
*bank
, unsigned int argc
, const char **argv
);
166 uint32_t cfi_flash_address(struct flash_bank
*bank
, int sector
, uint32_t offset
);
167 int cfi_spansion_unlock_seq(struct flash_bank
*bank
);
168 int cfi_send_command(struct flash_bank
*bank
, uint8_t cmd
, uint32_t address
);
169 int cfi_write_word(struct flash_bank
*bank
, uint8_t *word
, uint32_t address
);
170 int cfi_spansion_wait_status_busy(struct flash_bank
*bank
, int timeout
);
171 int cfi_reset(struct flash_bank
*bank
);
173 int cfi_target_read_memory(struct flash_bank
*bank
, target_addr_t addr
,
174 uint32_t count
, uint8_t *buffer
);
176 #define CFI_MFR_AMD 0x0001
177 #define CFI_MFR_FUJITSU 0x0004
178 #define CFI_MFR_ATMEL 0x001F
179 #define CFI_MFR_ST 0x0020 /* STMicroelectronics */
180 #define CFI_MFR_AMIC 0x0037
181 #define CFI_MFR_SST 0x00BF
182 #define CFI_MFR_MX 0x00C2
183 #define CFI_MFR_EON 0x007F
185 #define CFI_MFR_ANY 0xffff
186 #define CFI_ID_ANY 0xffff
188 #define CFI_MAX_BUS_WIDTH 4
189 #define CFI_MAX_CHIP_WIDTH 4
191 #endif /* OPENOCD_FLASH_NOR_CFI_H */
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)