From fe09811ea4d34c2ed50a38a956facf45be197214 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Sun, 29 Nov 2020 21:01:24 -0600 Subject: [PATCH] tcl/board: Add J7200 EVM basic support Add basic connection details with J7200 EVM Change-Id: Ia8fa5033a693ac09849d33693c81b8cb206f17c1 Signed-off-by: Nishanth Menon Reviewed-on: http://openocd.zylin.com/5951 Reviewed-by: Antonio Borneo Tested-by: jenkins --- tcl/board/ti_j7200evm.cfg | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 tcl/board/ti_j7200evm.cfg diff --git a/tcl/board/ti_j7200evm.cfg b/tcl/board/ti_j7200evm.cfg new file mode 100644 index 0000000000..cc70056fb4 --- /dev/null +++ b/tcl/board/ti_j7200evm.cfg @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (C) 2019-2021 Texas Instruments Incorporated - http://www.ti.com/ +# +# Texas Instruments J7200 EVM +# + +# J7200 EVM has an xds110 onboard. +source [find interface/xds110.cfg] + +transport select jtag + +# default JTAG configuration has only SRST and no TRST +reset_config srst_only srst_push_pull + +# delay after SRST goes inactive +adapter srst delay 20 + +if { ![info exists SOC] } { + set SOC j7200 +} + +source [find target/ti_k3.cfg] + +adapter speed 2500 -- 2.30.2