From fd39a5e8addce366467ad7305eb270ddd635f4a9 Mon Sep 17 00:00:00 2001
From: Spencer Oliver <spen@spen-soft.co.uk>
Date: Tue, 14 Feb 2012 14:20:51 +0000
Subject: [PATCH] cfg: change default stellaris working area

This sets the default stellaris working area to 2k rather than
the current 8k. 2K is the smallest RAM size in the stellaris family.

Change-Id: I1407f758eb0926cc094b824a6d25199b313c45de
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/458
Tested-by: jenkins
---
 tcl/board/ek-lm3s1968.cfg     | 1 +
 tcl/board/ek-lm3s811-revb.cfg | 1 +
 tcl/board/ek-lm3s811.cfg      | 1 +
 tcl/target/stellaris.cfg      | 6 +++---
 4 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index d47e9e2edc..e79452c796 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -13,5 +13,6 @@
 source [find interface/luminary.cfg]
 
 # include the target config
+set WORKAREASIZE 0x2000
 set CHIPNAME lm3s1968
 source [find target/stellaris.cfg]
diff --git a/tcl/board/ek-lm3s811-revb.cfg b/tcl/board/ek-lm3s811-revb.cfg
index aa6e982a08..fb145e4ffc 100644
--- a/tcl/board/ek-lm3s811-revb.cfg
+++ b/tcl/board/ek-lm3s811-revb.cfg
@@ -8,5 +8,6 @@
 source [find interface/luminary-lm3s811.cfg]
 
 # include the target config
+set WORKAREASIZE 0x2000
 set CHIPNAME lm3s811
 source [find target/stellaris.cfg]
diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg
index f8b3a2e82e..db7324a721 100644
--- a/tcl/board/ek-lm3s811.cfg
+++ b/tcl/board/ek-lm3s811.cfg
@@ -9,5 +9,6 @@
 source [find interface/luminary.cfg]
 
 # include the target config
+set WORKAREASIZE 0x2000
 set CHIPNAME lm3s811
 source [find target/stellaris.cfg]
diff --git a/tcl/target/stellaris.cfg b/tcl/target/stellaris.cfg
index 0afe2e791a..06f27c5680 100644
--- a/tcl/target/stellaris.cfg
+++ b/tcl/target/stellaris.cfg
@@ -47,8 +47,8 @@ swj_newdap $_CHIPNAME cpu -irlen 4 -irmask 0xf \
 if { [info exists WORKAREASIZE] } {
    set _WORKAREASIZE $WORKAREASIZE
 } else {
-   # default to 8K working area
-   set _WORKAREASIZE 0x2000
+   # default to 2K working area
+   set _WORKAREASIZE 0x800
 }
 
 set _TARGETNAME $_CHIPNAME.cpu
@@ -133,7 +133,7 @@ proc reset_peripherals {family} {
 $_TARGETNAME configure -event reset-start {
 	adapter_khz 500
 
-	#	
+	#
 	# When nRST is asserted on most Stellaris devices, it clears some of
 	# the debug state.  The ARMv7M and Cortex-M3 TRMs say that's wrong;
 	# and OpenOCD depends on those TRMs.  So we won't use SRST on those
-- 
2.30.2